10 Cool 3D Printing TimeLapses / 3D Printing Ideas (Ender 3 Prusa MK3S)

Подписаться 128 тыс.

Просмотров 1,2 млн

50% 1

Here's a handful of 3D Printing TimeLapses / OctoLapses. Enjoy! :) Get the Best Budget 3D Printer of 2023 Here: bit.ly/3oKdmpq (affiliate link)
Follow me on social media here:
TikTok - www.tiktok.com/@wildrosebuilds/
Instagram - / wildrosebuilds
MODELS:
Print in place vault box - www.myminifactory.com/object/...
print in place battery case - www.myminifactory.com/object/...
Print in place Tessellator tray - www.myminifactory.com/object/...
print in place operator box - www.myminifactory.com/object/...
skull castle pot - www.thingiverse.com/thing:309...
skull planter - www.thingiverse.com/thing:293...
Elephant phone stand - cults3d.com/en/3d-model/gadge...
2 way screw - www.thingiverse.com/thing:469...
folding box - cults3d.com/en/3d-model/gadge...
MUSIC:
Universe by Sappheiros / sappheirosmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3bhbSt6
Music promoted by Audio Library • Universe - Sappheiros ...
#3dprint #3dprinting #3dprintingtimelapse

Развлечения

Опубликовано:

27 май 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 257

@WildRoseBuilds Год назад

Get the Best Budget 3D Printer of 2022 Here: shrsl.com/3obuu

@tony2800 2 года назад

The fact that 3D printers can print moving parts and gears in one print just blows me away I have no clue how that works it doesn't seem possible to me but I have very little knowledge on 3D printers but badly want one

@BeastlyTT 2 года назад

As someone with a 3D printer I will say, this is still quite incredible. I couldn't print half the stuff this guy does. Either he takes an insane number of hours to dial in his printer to get these results or he's just really lucky. If you want to get into 3D printing I suggest SLA printers. More toxic but you'll spend less time printing and trying to print. Filament printers are just such an ache to tune and get to print as well as shown in this video.

@jacobstewart6014 2 года назад

@@BeastlyTT I have an ender 3 pro and it prints extremely well out of the box. The main thing is getting the print settings right and using the right slider (I use cura)

@tiloalo 2 года назад

It can, but only when tuned extremely well. For a hobbyist, it's almost impossible to get those perfect print.

@valentin0488 2 года назад

Even Slic3r gets the job done , but first of all, the bolts need to be tighten neetly, and then of course the software printing settings need to be tuned. But with these it can go wrong from time to time, I personally haven't got bad ones, except when I would screw up the settings.

@jordyv.703 2 года назад

@@jacobstewart6014 And constant bed leveling. I don't have a cr-touch yet

@redpug5042 2 года назад

took me 10 replays to see how that hinge worked in one print. Really cool that it just uses little "divots" to make the connection.

@evelynfive5684 2 года назад

Print including hinge joints blows me…

@3DPrintingIndustryNews 3 года назад

Nice and relaxing watching these time-lapses.

@crafthappylife 2 года назад

Can't go wrong with clockspring models! I love em

@lboogy8705 2 года назад

3D printers are like magic wands. Amazing 👏

@NateWithMe1 2 года назад

Your print quality is so good!

@quindumouchelle233 3 года назад

Could you possibly put a title card for each print saying what filament was used? So we know where to get the beautiful colors! Thanks!

@WildRoseBuilds 3 года назад

yes! that's a great idea!

@lessthanahome 3 года назад

@@WildRoseBuilds could you do a tutorial on how to film these time-lapses? Or just tell me in a comment lol

@simonchoudhury7576 3 года назад

@@lessthanahome octoprint

@lessthanahome 3 года назад

@@simonchoudhury7576 thank you brother, I got a raspberry pie 3 b+ I think is the model, I'll set it up tonight. Can I use a gopro for the camera?

@After_Tech_Industries 2 года назад

@@lessthanahome so long as it can store footage, yes

@mitkasan8915 3 года назад

Thank you for positive video! 😊

@jzbreezio 3 года назад

Those tolerances though... noice.

@WildRoseBuilds 3 года назад

@owaisabdulmoeed7644 Год назад

These lapses are truly pieces of art. You have my respect 🫡

@sharpy3453 2 года назад

wish my prints were this good lol. seeing this really makes me want to get my printer going again.

@kairon156 2 года назад

cool prints. I never thought about one being made for plants before.

@beatrizmancila9229 3 года назад

I love your videos, they are very perfect

@WildRoseBuilds 3 года назад

Thanks Beatriz!!

@RedditStorys690 Год назад

I love the clock in the background somehow it adds more life to the timelapse. XD

@viralhub9460 3 года назад

Love your videos❤️

@Gabriels3DPrinting 2 года назад

This is a great video!

@jase4364 2 года назад

I must know your support settings!! Great prints!

@user-vy5hc9ud6l 3 года назад

Ok i need more of this

@WildRoseBuilds 3 года назад

Lots more coming ;)

@Bianchi77 Год назад

Nice video, thanks :)

@WildRoseBuilds Год назад

thanks for watching!

@yaserexperience1 2 года назад

Very wonderful

@inna.rudenko8571 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eusuxCDM6vA.html&ab_channel=SKANER

@suhascshekar 3 года назад

That skull pot was epic

@WildRoseBuilds 3 года назад

super cool model! lots of support though, but worth it!

@NitrousBanshee 3 года назад

Love your videos.

@WildRoseBuilds 3 года назад

Thanks so much! :)

@reinux 2 года назад

I like how the clock goes faster or slower depending on how much there is to print per layer

@inna.rudenko8571 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eusuxCDM6vA.html&ab_channel=SKANER

@dr.onyekafranklinochonogor 2 года назад

Great work. What type of 3 D printer do you recommend for printing recycled PLA abs ABS.

@braedenday1652 2 года назад

Love to see that Nova hotend in use! Do you have your slicer settings for it posted somewhere?

@Miz2077 2 года назад

I like how all are Print in Place

@chamika888 2 года назад

woow looks awsome. what was the camera and setup used to this? why cant i see printer moving?

@MalkitSingh-ic2zn 3 года назад

Love to see ur videos

@WildRoseBuilds 3 года назад

Thanks for watching them! :)

@macraealford8356 2 года назад

Love your videos! How do you get the Timelapse without the hot end being in the way?

@johnlee7498 3 года назад

What slicer software do you use to get that zigzag type of support? Great video btw!

@tommasopapponi6259 2 года назад

Would be super nice to know which settings and filaments did you use for those prints😍😍

@nuchoTires 2 года назад

Very nice

@neronstudio2270 3 года назад

it's beautiful and hypnotic, what camera are you using?

@geoffroy9659 2 года назад

Bonjour 🤝 Excellent travail bravo 👏 Merci pour votre vidéo

@danielrettbergsoler 3 года назад

Do you use Cura? If you do, would you share your settings? Your prints look just perfekt!

@iPasky 2 года назад

How do you clean or do you add anything to your ultistik plate?

@denden3692 2 года назад

That's cool!

@inna.rudenko8571 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eusuxCDM6vA.html&ab_channel=SKANER

@ZappitezXan 3 года назад

Beautiful! What was the filament used for the skull planter?

@WildRoseBuilds 3 года назад

JAYO marble PLA! it prints great!

@Y.H.3. 2 года назад

@@WildRoseBuilds where did u get the file for it

@hansshane8359 Год назад

I wonder what kinds of filament do you use ? they looked fescinating

@kanjuara4410 2 года назад

Great work, what software do you use?

@3dPrintingMillennial 3 года назад

The green and orange prints are PETG, right? 2nd and 3rd print. Amazing!

@hokazshinitzu9042 Год назад

Hi friend, can you please upload your Cura settings for Ender 3, my parts are not as flexible as in your videos or did you edit them afterwards?

@girrisgod 3 года назад

would you consider doing an octolapse tutorial since you have the best ones on all of youtube?

@gehrig.mp4729 3 года назад

How do you get so your supports are easy to take off?

@franciscooliveira6863 3 года назад

What kind of filament is that black one used on used on the first printing?

@wolfmusician6759 3 года назад

Hey! Is there a tutorial video of how you have your ender 3 settings setup on cura I can watch?

@bobbybits 2 года назад

BRO how do you keep stringing under control with octolapse? These timelapses are amazing

@kokoromasarina6242 2 года назад

この3Dプリンター性能良すぎ

@jamesamelia1196 2 года назад

Love it Can you print articulated davy jones it's on cults?

@CommonSenseCriticism Год назад

What camera and software do you use for the time lapses?

@LovleeBaker805 3 года назад

Supercool

@CROW_BH11 2 года назад

Awesome video can you share your settings on your slicer? Thank you

@tiloalo 2 года назад

Wouldn't really help as the settings vary from printer to printer, room temperature, filament, ...

@blakegt.7326 Год назад

I have always wonder, how much filament do you need for something like this, is it expenssive?

@Easydread 2 года назад

Wow dude if you did a tutorial - i would definitely be you number one student 🤣. Great video - i bet whatever 3d printer you have is not cheap. The tune goes well with your video as well 👌🏽

@petefelton2636 3 года назад

What camera setup do you use on your ender 3

@johnnagy1575 2 года назад

Ok. How did you make the hinges ? That is way cool. Teach me

@melody3741 2 года назад

The music isn’t onboxious! You let us hear the sounds of removing the supports! Good job!!!

@BananaPig27 2 года назад

What type of nozzle did you use.... The model look so smooth Im new in this, really want to know what u did

@inna.rudenko8571 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eusuxCDM6vA.html&ab_channel=SKANER

@LV3D_France Год назад

Trop beau machallah

@Andi-Maringer 3 года назад

I am a big fan of your videos and your awesome prints!!! Is it possible, that you can tell us in the description of the video, what fillament you are using and the specs of the print like temperature and layer height?!? Thank you!!!

@WildRoseBuilds 3 года назад

yes! i think im going to start showing that in on screen title cards in future videos

@Andi-Maringer 3 года назад

@@WildRoseBuilds Awesome, Thanks!!! That is a big help for beginners!

@noahmartin5274 2 года назад

What camera do you use for your timelapses?

@djVania08 2 года назад

How much do you have to fiddle with the Ender? I want to print more than fiddle! :D thx

@peterhirschoff4935 2 года назад

What is the filament he is using for the vault and battery Box?

@mikefer14 3 года назад

Is it possible to achieve such tolerances with the ender 3? or the better ones are with the prusa?

@WildRoseBuilds 3 года назад

a lot of these prints are on the ender 3! its a great machine when tuned correctly :)

@kratosk7625 2 года назад

Hey I was wondering can you print bloodborne hunter's axe or other weapons Thanks love your videos

@rmp5s 2 года назад

I must say, I'm very intrigued...how are you getting the timelapses so smooth? It's obviously a decent camera with a fast lens and plenty of light, that's not what I'm confused about...is this OctoLapse? I've just started experimenting with it (and printing as a whole, for that matter) and, while it works, the bed and print head move about quite a bit in all mine. You using a trigger? Maybe modifying the gcode? Very cool, man...I love seeing things that make me think and this sure did!

@lynntucker4196 2 года назад

Soo.. i dont get it.. where is the filament COMING from?

@NiazDokrat Год назад

from what i understand its probably a plugin or something modifying the gcode to move the head and bed to fixed positions between layers and then trigger a pic so the model is in a constant position and the head is out of the way

@rmp5s Год назад

I've since figured it out. There's a plugin for OctoPrint called OctoLapse...it lets you use "real cameras" and tweak stuff and all that. Pretty sure that's what he's using.

@Daniel-yc2ur 2 года назад

What filament are you printing with?

@toddcoello6461 3 года назад

@clockspring makes some great models. He's a great person. We chat a lot about different model ideas.

@WildRoseBuilds 3 года назад

one of my favorite designers!

@Golf3gti1 3 года назад

Hello, I would like to print like this too. can you give me a few tips to make the print so beautiful? and how did you set your timelaps?

@tiloalo 2 года назад

Probably used octolaps for the timelaps (a plugin for octoprint). It pause the print at each layer, move the print head to the side, and trigger the photo. Regarding print quality, there is no secret or magical option, it's years of printing experience and perfect dialing of every parameters (which is almost impossible to achieve if you're not a professional printer)

@garygraves3748 2 года назад

@@tiloalo so what are your cura setting to make these so nice?

@tiloalo 2 года назад

@@garygraves3748 that's the point, my cura settings would be of no use. You need to dial them in for your climate, printer, filament, ...

@GradivusAres 3 года назад

What camera are you using?

@tal0z391 3 года назад

Hey you said you use prusaslicer right? Do you Just use the stock i3Mk3 profiles from prusa?

@WildRoseBuilds 3 года назад

yeah i do, i'll change up my material profile for different filaments but its usually just for temperature.

@drsentarius101 2 года назад

Which ultistik magnetic bed do you use?

@chrisblum2194 3 года назад

What camera & lens do you use for your timelapses? They look great

@inna.rudenko8571 2 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eusuxCDM6vA.html&ab_channel=SKANER

@fouzanjaved5441 Год назад

Sir, coo l 3d printer ideas you have just printed. Sir, what software do you have used to print amazing 3d printer ideas? Sir, tell me.

@blacktaro9602 2 года назад

Will a plastic 3d printer file template work on a cnc 3d printer?

@DoSomethingFun 3 года назад

Where did you find the elephant phone holder??

@OG_31 3 года назад

What camera do you use?

@patoelektronika1603 2 года назад

what material do you print PLA, ABS?

@TheDemonCaine 2 года назад

It'd be so cool to have a 3d printer.

@gnomoarmatodiascia6029 3 года назад

Love your videos! Can you please link the elephant stand model? Thank you :D

@Krevedkoes 3 года назад

To me too, please 🥺

@justinweber7547 3 года назад

cults3d.com/en/3d-model/gadget/flexi-mammoth-kendofuji#

@gnomoarmatodiascia6029 3 года назад

@@justinweber7547 thank you so much!

@WildRoseBuilds 3 года назад

@@justinweber7547 Thanks Justin, added to the description :)

@dikrama905 2 года назад

How did you remove the extruder in the video?

@tieuoi3173 Год назад

what camera you use ?

@aysiachisholm4173 Год назад

Going to make it 1 more time but bigger

@juusopartanen1548 Год назад

What software are you using

@mohammadsunboy 2 года назад

How do you film the printing operation without seeing the printer nozzle? Can you give a full explanation? Thank you.

@owaisabdulmoeed7644 Год назад

I think the setup is made in such a way that the printer moves the nozzle away to a specific place after each layer is completed, a picture is taken, and continues on to the next layer and repeats. The pictures are then combined to make a time lapse. Of course I could be entirely wrong as I don’t know much about 3D printing or time lapses but those are my thoughts.