10 Satisfying 3D Print TimeLapses on the Elegoo Neptune 3 PRO 3D Printer

Подписаться 128 тыс.

Просмотров 468 тыс.

50% 1

Here are 10 cool things you should 3D print. Let me know in the comments what you’ve been printing and what you’d like to see printed on the channel. Thanks for watching and happy printing! Check out this ridiculously cheap 3d printer here: bit.ly/3oKdmpq (affiliate link)
MODELS:
Gear Top Container - Designed by ClockSpring3D - www.myminifactory.com/object/...
Pheonix - Designed by FlexiFactory - / posts
Screw Lid Container- Designed by ClockSpring3D - / clockspring3d
Woven Pencil Holder - Designed by JamesThePrinter - www.printables.com/model/2025...
Glasses Case - Designed by ClockSpring3D - / clockspring3d
Skull Container - Designed by ClockSpring3D - / clockspring3d
Fidget Turbine - Designed by ClockSpring3D - / clockspring3d
Pill organizer - Designed by ClockSpring3D - / clockspring3d
Gravity Broom Holder - Designed by LoboCNC - www.printables.com/model/1525...
Switch joycon grip - Designed by ecoiras - www.printables.com/model/5264...
Support ClockSpring3D Here:
www.myminifactory.com/users/C...
/ clockspring3d
cults3d.com/en/users/clockspring
Support FlexiFactory Here:
/ posts
cults3d.com/en/users/FlexiFac...
www.myminifactory.com/users/d...
MUSIC:
Odyssey - jiglr / jiglrmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3Sed82O
Music promoted by Audio Library • Odyssey - jiglr (No Co...
gloomy by k o f i / xerum-wav
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3DpGy8v
Music promoted by Audio Library • gloomy - k o f i (No C...
#3dprinting #3dprinter #3d #3Dprinted

Развлечения

Опубликовано:

24 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 186

@TheStudio_70 Год назад

I’m almost 99% sure after watching this that I’m going to pull the trigger and order my first printer. I’ve been intimidated for years but I’m hearing good things about this printer in particular.

@evilparadigm Год назад

You can do it! I started about 6 years ago. I watched videos for a couple weeks and thought, "it would be cool if I could do this," then I just said... "I can do this!" There is so much support out there to get started.

@TheStudio_70 Год назад

@@evilparadigm I ordered my first one last night. Got the Elegoo Neptune Pro. I’m pretty excited to receive it!👍

@evilparadigm Год назад

@@TheStudio_70 Just make sure the room is at least room temp. If it's too cold, prints may not stick. Have fun!

@WildRoseBuilds Год назад

great choice congratz! happy printing! :)

@wellbog5594 Год назад

The ender 3 pro is good to start

@ricieric Год назад

Awesome prints (not even ONE stringing defect.. haha) and enjoyable timelapses. Also, very nice filaments. Congratulations !

@WildRoseBuilds Год назад

Thankyou so much for the kind words! :)

@abaronofchivalry5176 Год назад

I love how the first two builds were the ones he showcased in the thumbnail. Love it!

@WildRoseBuilds Год назад

**Just to address some comments here! This IS in fact the Elegoo Neptune 3 PRO 3d printer ( bit.ly/3YSiUL7 ) I've changed the title of the video to reflect this but the baked in ad will still only say Neptune 3. sorry for any confusion! happy printing!

@GS-1982 Год назад

Coś pięknego 🤩 uwielbiam oglądać wasze filmiki :)

@stuffymcstuffy Год назад

Hoping to get a 3D printer soon. Your work is inspiring thanks for sharing

@WildRoseBuilds Год назад

Thanks for watching! ☺️

@windowxwu4052 Год назад

so smooth

@ghostymost7138 4 месяца назад

I have just started getting into 3d printing and have been looking at different channels and have found a few interesting ones. One of my favorite channels and one i recommend to anyone getting into time lapses is a small channel called "Black cat 3d" they are a very new channel and have just started making time lapses of all the different things they make. The channel is super nice when responding to commens and i feel they should have more subscribers and support.

@Shadow3DP Год назад

cool prints! I just ordered special filaments.. have to think about what to make of them

@Sitetechnofr Год назад

Bonjour, Comme toujours, les modèles sont originaux et la mise en image est superbe. Merci pour ce moment de grâce technologique. 🙏

@maxpettit2343 Год назад

Most effective ad I’ve ever seen in my life

@WildRoseBuilds Год назад

Hahaha I’ll take that as a compliment

@adriarodergasiniguez1222 Год назад

Which filaments did you use for that awesome prints, and where could I buy them? Very nicely video, thanks for your highly production.

@B3L13V3R Год назад

Looks like a new bed almost every print. That printer must be perfectly tuned too.

@vampcaff Год назад

I'm starting to appreciate elegoo more and more than creality.

@WildRoseBuilds Год назад

Build quality is much better on these machines! I tested the ender 3 max neo a couple months ago and hated every minute of it haha. Thanks for watching!

@SimSummer Год назад

@WildRoseBuild i think anybody should take ur comment with a grain of salt as they legit are ur sponser so they pay u to say shit like diz

@raijinoflimgrave8708 Год назад

@@SimSummer exactly.

@scootersfrog Год назад

@@SimSummer they dont pay me but i will sing their praise as well my printing experience with enders has been hit or miss and they really aren't that great without mods .. my Neptune 2 was out of the box and printing reliably within minutes i have had it over a year with no mods done it will prints tpu beautifully same experience with my Neptune 3 just better .. great printers from Elegoo

@WildRoseBuilds Год назад

@@SimSummerthis is a valid point. I really recommend doing all your own research before buying a printer as with any consumer decision. But let’s be honest creality is slowly losing its grip on this market as they make countless iterations to their machines. We’ve seen them put out some truly baffling machines so to think that a company with the r&d funds and budget of elegoo making a machine on par with the ender 3 s1 pro isn’t a far stretch! Thanks for watching!

@Sovol Год назад

Pheonix is so cool!

@WildRoseBuilds Год назад

It is! ☺️

@andrewgedge4015 Год назад

Can you share some of your settings? I have the same printer, just getting started, and would like to improve the quality of my prints.

@blueballs5150 Год назад

3d printers can make articulating parts?!? I had no idea. That is intense and for a printer at that price. Still on the fence about getting one. Building rc parts would be cool

@tracyecarlton Год назад

Could you post your prusa slicer configuration for the Neptune 3 pro? Thanks so much!

@Ballasoldat 4 месяца назад

Nice filaments , which one do you use ?

@michaelrhew9421 Год назад

This 3D printer is high quality.

@OZSCQUADS 6 месяцев назад

what is that filament which is 2 colors? that is sick. would love to get some

@Max.Mustermann. 10 месяцев назад

Which nozzle size did you use for those prints ? Those are realy smooth prints 😮

@bellumartifex2496 Год назад

Awesome print as always... I got one question in comparison of Neptune 3 and anycubic Vyper which You prefer? Any tips which to choose?

@WildRoseBuilds Год назад

thanks! the kobra uses a strain gauge that the hotend is mounted to in order to do bed leveling. i find these to be pretty unreliable. i'd opt for the elegoo neptune 3 pro as it has an inductive sensor for mesh leveling. alternatively the ender 3 s1 has a bl touch which is quite reliable too.

@FilamentNext Год назад

What filament did you use for the Phoenix? It looks so cool!

@WildRoseBuilds Год назад

3D jake magic pla!

@pavel6016 Год назад

Really nice items! I would print it for my kids, could you please share the stl? Thanks!

@lunchbagSSBU Год назад

the 👑💀is pretty cool ngl

@WildRoseBuilds Год назад

yeah that ones a banger ;)

@hyderkashani3169 Год назад

@@WildRoseBuilds im trying to find the file with the crown can i get a link???

@josecarloscarrion3652 Год назад

No sé qué máquina es pero imprime súper bien. Los filamentos son muy bonitos. Saludos

@SeijukuZey64 Год назад

what settings do you use for your 3D prints?

@walterbryan1798 2 месяца назад

The Switch piece at the end could be really useful for Switch users. Now you don’t have to buy a Nintendo accessory item; print your own!

@j.4308 Год назад

neptune 3 is an awesome printer!! prints are amazing and clean!!!! links to files you printed?

@WildRoseBuilds Год назад

Agreed! Links for models are in the description! Some of them are patreon exclusive but for the amount of models and the quality it’s well worth it!

@shadow368 Год назад

What are you using for time lapse on your printer? I’ve been trying to find a good, trustworthy Timelapse camera for my CR10-V3. Currently I’m using my old iPhone 7 on a goose neck phone mount. But it’s not like it’s the best. It just made sense to use it at the time, seeing as it was that or dispose of the iPhone.

@axelhopfinger533 Год назад

The smoothness of the prints and effortlessness with which the moving parts fit, as well as the lack of visible stringing are testament to the accuracy and tight tolerances this printer can produce. And for that price, it looks like quite the bargain.

@WildRoseBuilds Год назад

Yeah! Some parts have a little z wobble but it seems to correspond with my shop heater kicking on. Highly recommend this printer! Thanks for watching :)

@moonrunner22000 Год назад

The second one: you printed irl me!

@something4533 Год назад

What are your settings I have a elegoo neptune 3 pro but Im having a hard time with the z offset could you recommend me one

@nicolaslovate3804 Год назад

Hi! How are you? In order to make those prints, what kind of filament did you use, and what was the temperature of the nozzle (extruder) and of the heated bed? Thank you.

@WildRoseBuilds Год назад

Mostly 3D jake pla, at 205c and 65c ;)

@mitkasan8915 Год назад

Hello, you can print random nickname from comments, people writing something under video, you can print his name! 👍😁

@printo3d 4 месяца назад

What camera do u use for timelapse?

@thanhavictus Год назад

Why do you use rectalin fill? Isn't cubic/gyroid strictly better?

@Norkee83 Год назад

Can you recommend pei sheet for an upgrade. Mostly print in petg and a bit of pla and tpu. Love the vids cheers 🍺

@WildRoseBuilds Год назад

The elegoo pei sheets are good but they’re single sided. You can look into ultistik beds, they’re double sided and I’ve printed every material on them without any glue stick or tape. Highly recommend if you’re using a polycarbonate bed! Thanks for watching!

@Norkee83 Год назад

@@WildRoseBuilds cool thanks I’ll check them out. printing on glass mirror right now but the ease of use in your videos looks so appealing. Keep it up man

@WildRoseBuilds Год назад

@@Norkee83 I’ve never brined on bare glass! It sure looks cool tho. Thanks for the kind words 🙏🏼

@CaseyHendrickson Год назад

I love my Neptune 3. Did you use a custom profile?

@WildRoseBuilds Год назад

It’s a great little machine! Nope just just did a little tuning and the default creality ender 3 v2 profile in prusa slicer! The last video I posted shows how I tune!

@Flo-Rida-FPV 9 месяцев назад

have any suggestions on how to make my Neptune 3 pro faster?

@dhruvbose8294 Год назад

Which slicer are you using? Could you please share your travel settings?

@WildRoseBuilds Год назад

150mm/s travel speeds in prusa slicer :)

@adrianberardo4668 Год назад

Esperaba tus videos

@artembrokhman7530 Год назад

what app are you using to make these 3d models?

@F.DoctorGT03. Год назад

superbe vidéo comme d'habitude , êtes vous satisfait de cette neptune 3 pro ? car elle m’intéresses également ...

@pjgamer-er4ij Год назад

where can i get you print settings? they are just 😌

@WildRoseBuilds Год назад

I recently uploaded a video about tuning! Check that one out!

@waynefilkins8394 Год назад

How do u take videos of the print growing without the extruder and all that showing up? Does it like move out of the way after each layer to take a pic?

@WildRoseBuilds Год назад

Yep! you guessed it. thanks for watching Wayne :)

@waynefilkins8394 Год назад

@@WildRoseBuilds Thanks, I always wondered about that when I saw these videos.

@fikrihairudin1006 Год назад

How you make this clean print?

@notimeforcaution1264 Год назад

I love my Neptune 3 so much I bought another one!

@WildRoseBuilds Год назад

they're great little machines! thanks for watching!

@mariaparaiso1700 4 месяца назад

Ola, pode compartilhar as configurçaões do fatiador ?

@graphguy Год назад

Cool! But I want to know how you got the video of the builds to not show the print head, that is really cool!

@WildRoseBuilds Год назад

octolapse!

@onie13 Год назад

What model printer you use?

@simifpv Год назад

HEy man, What settings did you use? What Slicer? and What GCodes did your Printer use?

@WildRoseBuilds Год назад

.16mm layer height At 210c in prusa slicer with standard marlin gcode! :)

@simifpv Год назад

Does your printer also level it self when you start a print? It kinda annoying.

@cavemansounds Год назад

What printer do u use

@danieljaeger116 Год назад

How deep (in mm) is the elegoo neptune 3 without the y-rail, just from foot to foot?

@WildRoseBuilds Год назад

If I had to guess maybe 280-300mm

@darknessstorm333 Год назад

Hi! one quick question do you do these prints with octolapse?

@WildRoseBuilds Год назад

yes!

@darknessstorm333 Год назад

@@WildRoseBuilds Ok thanks for responding!

@StormBurnX Год назад

ok that skull container is actually amazing, hot damn. It's also nice to see some proper competition to the CR6 SE from Creality - it launched just about 2-2.5 years ago offering similar features and insanely high reliability/performance for about 350, but with Elegoo knocking the price down to about 3/5ths and only losing a few features (like the super rigid dual Z-axis setup), this thing seems like a killer deal and I can't wait to see Creality's response. The CR6 SE was already a Prusa killer, and now with the Neptune being a Creality killer, who knows what's next! Things just keep getting better for the consumer :)

@WildRoseBuilds Год назад

BambuLab seems to be disrupting all of this as well. I think the ender 3 s1 was crealitys response to better machines. The pro version of the Neptune 3 has dual z lead screws and mesh bed leveling putting it’s feature list on par with the s1. Excited to see this space evolve! Thanks for watching :)

@StormBurnX Год назад

@@WildRoseBuilds And thanks to you for sharing! The Neptune Pro definitely is what I'd call a disruptive printer (BambuLab's Carbon X1 is over 6x the cost currently) I know Anycubic has some FDM units as well so I'd like to get a few of those next year and do a big comparison, but for now, Bambu is simply too far out of the budget even for an average 3D printing enthusiast, let alone a beginner, to consider them anything more than a cute idea

@WildRoseBuilds Год назад

@@StormBurnX the recently announced bambulab p1p is 600 I believe! Cheaper than an mk3s kit. But I agree anything over $500 is mid range budget. The anycubic kobra series is comparable but their use of strain gauges for z end stop and mesh leveling is unreliable unfortunately.

@StormBurnX Год назад

@@WildRoseBuilds That's sad to hear about the unreliable strain gauges; that's honestly my favorite part about Creality's CR6. I'm not fond of the probe ABLs and the inductive ones on my older Prusa seem to throw a fit whenever I change the bed material or thickness, I gave up troubleshooting it a long time ago and donated it to a friend. Hadn't heard about the P1P, it looks interesting! Definitely going to be keeping an eye on BambuLab this upcoming year.

@WildRoseBuilds Год назад

@@StormBurnX I should have a bambulab P1P video soon. Stay tuned!

@king22366 Год назад

Harmony

@Piction3D Год назад

What do you use to make timelapses

@WildRoseBuilds Год назад

octolapse!

@robmuehlhausen85 Год назад

Just purchased this 3D printer. What slicer do you recommend? I’m in a 2022 MacBook Pro. Thanks!

@robmuehlhausen85 Год назад

Also, fun fact, the Phenix design made me want to order this. Absolutely incredible. Could you do a settings tutorial? No way that’s straight out of the box. Right?

@WildRoseBuilds Год назад

It sure is! I use prusa slicer and there’s a default Neptune 3 profile ;)

@robmuehlhausen85 Год назад

@@WildRoseBuilds You responded! Thanks for the tip. Really appreciate the videos. Whole reason I even got interested in 3D printing. Now I just need to figure out what I’m going to print. Lol Take care, and thanks again.

@azure397 Год назад

멋진 세상이다!~ㅎㅎ

@jtoussin Год назад

hey can you send me a link to the prints?

@benetlevy620 Год назад

whats the top speed?

@ganeshkandu Год назад

make conch shell and blow it see if it can make sound like real conch

@burgerman7160 Год назад

3:10 I can't see the leveling sensor. How do I level this print?

@WildRoseBuilds Год назад

neptune 3 has a strain guage that the hotend is mounted to sensing when the nozzle comes in contact with the bed. neptune 3 pro has an inductive sensor sensing the metal build plate ;)

@user-vm1xj2bb8p Год назад

Phoenix wings should be foldable like a bird

@BillyBanana75 Год назад

Why isn’t the head visible in the video?

@DarrenMansour Год назад

What speed did you print these at?

@WildRoseBuilds Год назад

60mm/s :)

@Darth-Hylian Год назад

Wait... You can print a working hinge? How?

@bp33562 Год назад

Is the bed a PEI sheet?

@WildRoseBuilds Год назад

Pei Powder coated spring steel sheet!

@Lagmeister12382 Год назад

Clearly this is a Neptune 3 PRO and not a Neptune 3, the quality between the 2 is night and day without some significant modification to the base 3.

@WildRoseBuilds Год назад

yep its the pro, i've changed the title of the video to reflect this!

@zolofo607 Год назад

Your print accuracy makes me mad. You're just showing off at this point 😆

@WildRoseBuilds Год назад

@KruellNationGaming Год назад

I like your honest moment there. Under stipulation for receiving sponsorship in some form, forced to show a commercial for elegoo, and receipt their monolog, at the moment you said how great the quality was, one of the worst overhangs is scrolling upward on the video.

@WildRoseBuilds Год назад

That overhang well exceeds 45 degrees. Safe to say I chose the wrong clip to show off print quality but The rest of the video speaks to the quality of prints. Thanks for watching!

@KruellNationGaming Год назад

@@WildRoseBuilds I have a neptune 2s, and in fairness the product provided for the price is exceptional. It is also one of the easiest printers to mod

@aodgh0str1der21 Год назад

Anyone know what slicer the person might be using

@WildRoseBuilds Год назад

prusa slicer! highly recommend

@aodgh0str1der21 Год назад

@@WildRoseBuilds do you have any recommendations on how to set up prusa slicer?

@WildRoseBuilds Год назад

@@aodgh0str1der21 the setup wizard lets you import Neptune profiles and ender 3 profiles!

@renatochong796 Год назад

when I printed it here at home, everything was glued together... without movement. What do I need to regulate?

@WildRoseBuilds Год назад

Check out my latest tuning video and focus on the extruder steps. Sound like you’re over extruding!

@DMarkAgostinelli Год назад

Something seems wrong here. How do you print moving parts? Were the moving parts printed separately and then put together? This does not make sense to me. Did he print the parts and then place them together to make it look like he printed it in one shot? Is this a trick? Would the hinges and joints be glued stuck?

@Goober837 Год назад

3D printer: I can make a joy con grip for your switch so you could make one whenever you want! Mfs who play Fortnite: how much can it make?!

@DMarkAgostinelli Год назад

I thought you need to print each part individually and then put it together. How do you print moving parts? Is this fake? Wounding the moving parts, or hinges get glued or stuck together? There is something about this that makes no sense to me.

@Oliver1071 Год назад

there are tons of print in place models the gap is built in so it doesn't fuse. It's pretty amazing stuff.

@grumnation3655 Год назад

How does it print like that it’s just rising from the table

@WildRoseBuilds Год назад

this is a timelapse where the print head moves out of the way for a picture!

@Kethra430 Год назад

0:44 really thought number 2 was a lobster 🦞 not a Phoenix

@WildRoseBuilds Год назад

lmao :) thanks for watching

@tdogjack Год назад

You can clearly see at 0:46 that this printer is the Neptune 3 PRO not the 3. Y u lie bro. In fact it seems all prints were done on the pro.

@WildRoseBuilds Год назад

yep its the pro, changed the title to reflect this!

@edenassos Год назад

Was gonna get the Neptune, but their customer service and logistics is bad so I went with Bambu lab.

@WildRoseBuilds Год назад

fair enough!

@unclefester4626 Год назад

I wonder if lego can be 3d printed?

@RanveerKumar-so9hv Год назад

filament name ?

@WildRoseBuilds Год назад

3d jake magic pla

@User-gyakak Год назад

Where the hell you got this freaking music.....

@WildRoseBuilds Год назад

I spend a long long time looking for good royalty free music. ☺️

@davidlopez-un9zp Год назад

3d printed claws

@djjuno Год назад

This is not an Elegoo Neptune 3. It's the Elegoo Neptune 3 Pro..

@WildRoseBuilds Год назад

yep! changed the title to reflect this!

@king22366 Год назад

Hi I’m kj’s sister

@king22366 Год назад

Omg

@farhanimtiaz5359 Год назад

All I see is boxes

@s1r100 Год назад

Tu intresting

@TheLotw Год назад

Elegoo sucks when things go wrong. My Neptune was a POS from day one. They sent replacement parts but there where soo many things wrong and when I found the last one ( bed massive warped) they said they dont have beds for that anymore so buy a new printer.