10 Forstner Bit Tips and Tricks - I bet you're running your bits too fast (Free RPM Chart Download)

Подписаться 549 тыс.

Просмотров 82 тыс.

50% 1

Support what we do at www.kmtools.com
I bet you’re running your forstner bits at the wrong speed. In today’s video we talk about Forstner Bits and the ten best ways to use them. There’s a free PRM chart download and we talk about how to use them and where.
Let me know what you’d like to see next! Please like, comment and subscribe.
----
Support what we do at www.kmtools.com
Free Forstner Bit RPM Chart shop.kmtools.com/rpmchart
CMT Forstner Bit Set (Discount Code KMTBIT) shop.kmtools.com/CMTforstnerbits
Center Punch shop.kmtools.com/centerpunchred
10 PAck of Ultra Strong Magnets shop.kmtools.com/3BQFNpm
We Just Launched CMT Router Bits and they’re on sale shop.kmtools.com/cmtrouterbits
The Katz-Moses Woodworker’s With Disability Fund kmtools.com/pages/kmww-charity
----
*Check out OUR BRAND NEW STORE for tons of great TOOLS and Support the Katz-Moses Woodworkers with Disabilities Fund*: www.KMTools.com
Buy the Katz-Moses Stop Block: kmtools.com/collections/stop-...
Buy the Katz-Moses Magnetic Dovetail Jig: kmtools.com/collections/dovet...
*Buy the Katz-Moses Woodworking Apron*: kmtools.com/collections/workwear
Donate to The Katz-Moses Woodworkers with Disabilities Fund kmtools.com/pages/kmww-charity
----
Timestamps
Timestamps
Intro- Proper RPM and Free Download 0:00
How to Use a Forstner Bit Correctly 0:55
How to Tell What RPM You’re Using 2:00
How To Drill a Through Hole 2:37
Drilling Plugs and Using a Center Punch 4:25
Inside Curves, Magnets, Mortises, and Round to Square Legs 6:20
Forstner Bit Set, Discount Codes and Outro 8:27
----
I have Walnut Slabs for sale: kmtools.com/collections/walnu...
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/30bA39o 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Woodworking in SLOW MOTION Playlist:
• Slow Motion Woodworkin...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
My Apron: kmtools.com/collections/workwear
My favorite Dozuki dovetail saw - shop.kmtools.com/dozuki
My favorite Ryoba saw - shop.kmtools.com/ryoba
Marking Gauge: shop.kmtools.com/dbmk
Marking Knife: shop.kmtools.com/dbmk
NEW Suizan Flush Trim Saw: shop.kmtools.com/flush
Narex Richter Chisels: lddy.no/ussg
Knew Concepts Coping Saw (best deal I’ve found): lddy.no/120mz
Dewalt Planer Package: amzn.to/2thEf6O
CMT Chrome are the Absolute Best Table Saw Blades (JKM10CMT for Additional 10% Off)- lddy.no/ggf9
Great Small Tape Measure: lddy.no/120n2
BLEM Combination Squares (high accuracy and value at a fraction of the price due to cosmetic scratch): lddy.no/120n3
The ABSOLUTE best Sandpaper on the market: lddy.no/10ucv
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
5 Minute Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
2:1 High Performance Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
Dewalt Trim Router: amzn.to/3Ay6c7D
Dewalt Full Size Router Kit: amzn.to/3FH8Njp
Dewalt Planer: amzn.to/2YSkpiS
Bosch 1.25 HP Colt Router: amzn.to/3DzNjmF
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA

Хобби

Опубликовано:

2 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 128

@katzmosestools Год назад

*Support what we do at* www.kmtools.com *Free Forstner Bit RPM Chart* shop.kmtools.com/rpmchart *CMT Forstner Bit Set (Discount Code KMTBIT)* shop.kmtools.com/CMTforstnerbits *Center Punch* shop.kmtools.com/centerpunchred *10 PAck of Ultra Strong Magnets* shop.kmtools.com/3BQFNpm *We Just Launched CMT Router Bits and they’re on sale* shop.kmtools.com/cmtrouterbits *The Katz-Moses Woodworker’s With Disability Fund* kmtools.com/pages/kmww-charity

@pamtnman1515 6 месяцев назад

thank you, Jonathan

@sailingeric Год назад

Forstner bit was invented by Benjamin Forstner who is buried not to far from where I live. Some day soon I will need find his grave ( it is near Salem Oregon) and pour out a little sawdust for all woodworking homies.

@velcroman11 Год назад

Yes,he was buried in a circular grave cut by a really big Forstner bit.

@christophermckinney984 Год назад

Don’t just go up there with some mad dog sawdust! Better at least be some Johnnie Walker level sawdust or better!

@jasondalton6111 Год назад

Thanks for the RPM guide. Printed. laminated. Tacked up by the drill press.

@katzmosestools Год назад

I love mine. So helpful

@sashqa0 9 месяцев назад

This press has worked like a charm for my projects ru-vid.comUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

@BiggMo Год назад

6:14 “…we don’t hide our mistakes…” …RESPECT!!!

@mickleblade Год назад

I reccomend a wood burning stove....

@d-rayphelps1630 2 месяца назад

Thanks for sharing this with us. I have been trying to turn that bit at 3000 fine dust and smoke!!! So now I know better. Thanks so much I appreciate you very much!

@Goalsplus Год назад

Some times I think of odd things. If we're upcycling or reusing wood from an old build in 50 years, will we be digging out magnets along with the nails and screws?

@Nettle314 4 месяца назад

Perfect, thanks! The meticulous conversion from the imperial to the metric part in the chart is no joke ey! Machinist grade NASA level stuff, damn ! haha, giggle aside tho this information is gold - cheers!

@dillboy2 Год назад

Love how at the end you said 'Router bits' clearly your mind was else where, but really good video! Honestly knew slow was good but was'nt expecting 250 rpm! Will definitely give it a try! Keep up the good work your content is brilliant!

@attainableapex Год назад

you can loosen the strength on the retraction of the spindle. It’s super easy and makes it a bit easier to use.

@mariushegli Год назад

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

@imjoekang Год назад

I got a set of CMT forstner bits and can confirm happily drilling holes daily.

@katzmosestools Год назад

They're great!

@antonoat 4 месяца назад

Superb video, thanks a bunch for sharing your knowledge with us newbies, I’ve subscribed to your channel. Cheers from the UK 👏👍😀🍺

@littleeaglewoodworks Год назад

I cannot believe that I didn’t realize this. Thank you sir. Today my bits cut through cherry like they were new without any burning!

@ironwood1621 Год назад

Thank you for the chart. Very good info.

@COEYRN Год назад

I love it when I watch several videos and somehow I missed the one persons video that can actually explain why? You actually just explained to me, in simple terms, in the first thirty seconds what i'm doing wrong. I am definitely subscribing to you. Plus I was looking at just the pictures of your other videos and they look super awesome. I just watched the rest of your video. Damn!!!!😂❤

@SpencleyDesignCo Год назад

thank you for the fantastic info jonathan!

@MrHaesuse Год назад

Just found your channel. Love it, Chief Sawdust Maker. Bought the sled stop from your shop today. Thanks for your content.

@glennprovenzano1837 Год назад

Thanks for the RPM guide

@carasmussen27 Год назад

Thank you. I am looking into buying a set of forsner bits. This was very helpful

@waydegardner7373 Год назад

Man this is good info. I did 72 oak branch tea candles and by trial and error (I’m new to the craft) found the right rpm but it was work. Thanks for this.

@markduggan3451 Год назад

Great information as always.

@villageidiot8718 Год назад

Thanks for the helpful information and handy chart.

@MCsCreations Год назад

Fantastic, Jonathan! Thanks a lot for the guide! 😃 Stay safe there with your family! 🖖😊

@katzmosestools Год назад

My guy!

@gurj441 Год назад

Hi Jonathan, once again a fantastic informative video, thank you. Could I ask would you use spade bits in the same fashion or do they have different applications?

@jodilea144 Год назад

Thanks for the tips! 🙂

@patrickbink4617 Год назад

Great information Jonathan. My biggest takeaway is to slow the speed down. Thank you. Now its time to check out your store again :)

@BobMuir100 Год назад

Amazing! I had no idea for me it was always more power!! Kindest Bob England

@norm5785 Год назад

Awesome information stay safe happy and healthy, thank you for sharing this with us today from Henrico County Virginia

@katzmosestools Год назад

Cheers!

@douglasbrown3493 Год назад

Great video, thanks for the tips! My only difference is I find that no matter how hard you try to hide plugs by grain matching, once finish is applied they are easy to spot. So I turn mine into a design feature and turn the grain 90 degrees. And even more as a stand out feature would be to use a contrasting wood although that may not always be appropriate. Thank you!

@tannerevans3056 Год назад

You are 100% right. I’m runnin these babies way too fast. Might explain why I have to replace them so often. Lol. ThankS, JKM!

@daveleach4357 Год назад

Great question

@danielmaclellan7003 Год назад

Your feedback on drilling at angles as well as bit sharpening would be appreciated! Thanks for the awesome vid!

@DrinksWithCody Год назад

8:27 - "a bunch of ways to use router bits" It's ok. I have a kid under 5 too and rarely get enough coffee. I get it.

@katzmosestools Год назад

Hahaha this guy gets it

@kencoleman7762 Год назад

Great video. I noticed you are using a Nova Voyager DVR drill press and that thing improved my work on a drill press. With no belts to change, you dial in whatever speed you want. The icing on that cake, however, is the computerized control that suggests the best speed for seems like a hundred different types of bit for different thicknesses of different woods. I was running my hole saws way too fast and, once I started using the suggested slower speeds for different diameter saws for different types and thicknesses of wood, hole sawing smoothed out and life was good.

@TrevorDennis100 Год назад

I was thinking along those lines, but that's a $2000 drill press. In Australia and New Zealand we can get the Full Boar 750W drill press for the equivalent of a little under US$300. It does not have speed range of the Nova, but is infinitely variable from about 400rpm to 2500rpm. It has 80mm (3 1/8") spindle travel, and something I really like, a 16mm (5/8") keyless chuck. Hmmm... I have just checked and the price has gone up 150% since I bought mine, so it is now NZ$750 (422USD) but that is still just a quarter the price of the Nova. The bottom line is both drills can change speed without the need to mess with belts and pullies, or even stop the drill, so it is super easy to always use the right speed.

@kencoleman7762 Год назад

@@TrevorDennis100 You make an excellent point. I was not aware of that drill but it sounds like a very useful tool.

@russelltherealestateguy7527 Год назад

I was definitely running my bits to fast. Thanks for the tips.

@katzmosestools Год назад

My guy!

@brentfowler2317 Год назад

Dang Jonathan, my drill press can't even show down that much! Lol Great advice though my friend! I work in a cabinet shop full time. So I see the crazy wrong way to do things with newer people all the time! Anyhow thanks for all the excellent content on your channel my friend!!

@straight_to_finish Год назад

Ahhh, I wish this video came out last week. I used a forstner bit (+ track saw) to cutout an apron sink in a Boos maple counter for a customer. It was definitely smoking due to the high RPM’s but fortunately, it didn’t matter since it was only a rough cutout. I finished the cutout using a template and flush trim router bit and it left a perfectly smooth finish-no sanding required.

@magicworldbyjorg Год назад

,a cool video keep up the great content.. Thank you…..

@3henry214 Год назад

Well... this certainly explains why I've been burning through my Forstner bit set, as I've been clueless regarding the correct speed and the manufacturer of the set did not see fit to provide any rpm recommendations or warnings to use them at low speed. It also doesn't help when the packaging/description indicates that they are made from HSS (high speed [tool] steel), which causes the uninitiated (like me) to not think twice about limiting the rpm's.

@davidmeyer9204 Год назад

Thank You

@stevenlarson6125 Год назад

My drill press only goes down to 480 (belt driven). It sucks when using larger forstners as I know they aren't cutting efficiently. Using a hand held drill sucks with large forstner bits though.

@cabman86 Год назад

I was boring 2" holes in spalted oak using the slowest speed and was still overheating the bit. It's a drill press that you move the belt from pulley to pulley.

@fdort3971 2 месяца назад

Thanks

@RockHardWoodDaddy Год назад

Very nice! :) My drill press gladly has an rpm chart at the belt top :D

@katzmosestools Год назад

Very nice!

@RockHardWoodDaddy Год назад

8:26 I guess your meant to say "forstner" instead of router :p

@edwardcook3716 Год назад

Great video but it raised a Question - does the speed chart apply to drilling end grain too, or just face grain?

@regularguy9264 Год назад

Great video. You could have also mentioned any videos you have on sharpening those bits, or the merch you carry for sharpening them!

@spycedezynuk Год назад

Stumpy nubs has a really good video on that just using a credit card size diamond sharpener

@murayamawoodworks Год назад

Thank you for this! Just the other day, I was using my forsteners for drilling some holes for a microwave install using my cordless (I know, not the intended purpose). But I was thinking then, "this is probably not the right speed for this, since my drill press runs much slower..." Now I know. It wasn't the right speed! Aside from that, I don't see it the description or comments but what set of plug cutters do you recommend? I'm actually in the market for them. Thanks as always!

@markwatters6875 Год назад

Thanks mate 👍🇦🇺

@katzmosestools Год назад

👍

@greglevandoski2983 Год назад

Yo J-Katz, can you look into selling a 10mm forstner bit to go along with the 10mm magnets you sell? Great video and thanks for the speed chart. Be well.

@chrissanchez2152 Год назад

Great video! and then you said router bits at 8:28 🤦🏽‍♂️ but we know what ya mean - great content as always

@jhans3278 Год назад

Thanks for the video. How difficult is it to sharpen CMT forstner bits? Do you have any comments about carbide-tipped forstner bits?

@katzmosestools Год назад

They're like 6-8 dollars a piece on my website. If you run them right you won't have to replace often. Sharpening is way more trouble than its worth

@woodysranch2690 Год назад

You should do a review on the Nova DVR Drill press. It is the reason you can change the speed so easily, most wouldnt bother changing the belts and folks need to know more about this drill press regardless of the price. The Viking is a cheaper more affordable version with the same features

@madebyshellien Год назад

"Do as I say not as I do." Okay dad. 🙄🤣

@yohannsantos4901 Год назад

Thanks for the video! any forstner bit you would recomend in metric and in europe? I got some cheap ones and it gets dull really fast. Those CMT are just imperial, right?^ Cheers!

@JohnBaron-yc6ss Год назад

One professional woodworker I know told me he keeps his drill press set at the lowest speed for everything (except metals). Thoughts about that?

@kevinr1704 Год назад

The same goes for drilling metal. Most people want to run the drill or drill press at wide open. You will go through a lot of bits doing that. Or you better learn to sharpen them properly and often. Thank you for sharing this!

@kevinr1704 Год назад

@text-3264 You need Jesus Christ in your heart. We work hard for what money we have, and you try to steal it. Why don't you quit scamming people and get an honest job? Everybody's wise to these stupid scams. You may not get caught and have to answer for what you've done, but one day, you will stand before a just and Holy God and give an account of your actions. I suggest that you repent of your sins and ask Jesus Christ to be your Lord and savior before it's too late.

@jimwiskus8862 3 месяца назад

Do you have a preference on a good solid brand of forstner bits?

@rustyreview 4 месяца назад

im having a hell of a time going into pine end grain. anything that needs to be adjusted for that?

@creationscaplette Год назад

I was wondering if the speed can be too slow... could I just use the slowest speed on my drill press no matter the size of the bit and the type of wood ?

@BrianKothe Год назад

My drill press only goes down to 500 RPM, am I SOL when it comes to bits that should be run under 500 or is there another way to keep the bit cool?

@bobjohnson6371 Год назад

I bought a set of forstner bits, 1 inch through 3 inch. All the spurs ( tips ) are threaded, so they screw them selves into the wood. Almost impossible to use with out hurting yourself. Any ideas why they would come like that ? My smaller set just has smooth tips, work great.

@ikust007 Год назад

Merci énormément

@katzmosestools Год назад

You're welcome my friend!

@efaber3565 Год назад

In between boring stages, I leave the drill press on. Then use a clean, dry toothbrush to remove the buildup of wood chips.

@ikust007 Год назад

5:54 brilliant

@timwoods4100 Год назад

Funny, I just bought 5 Nova drill presses for our shop.

@katzmosestools Год назад

They're pretty incredible

@jesterraj Год назад

What's a good set between $20-$25???

@BariumCobaltNitrog3n Год назад

Haha you called them router bits at the end there. 8:25 Slow down you say, good advice.

@katzmosestools Год назад

Yeah that's been a thing for my entire career. 🤣🤣

@BariumCobaltNitrog3n Год назад

@@katzmosestools Well, I agree. I turned down the speed on my drill press, I use Forstners on walnut and red oak so I thank you for that. Now if I could get the shop a little more organized...

@SavageVoyageur 23 дня назад

Dang my drill press only goes to 610 RPM at the lowest speed. Time to upgrade, or is there another option?

@G0rad Год назад

What are those magnets

@ronaldpatton5668 Год назад

After 40 years as a toolmaker I can tell you that the tool will tell you if your speed is correct.

@ikust007 Год назад

1:13 nice automatic rpm setting !

@katzmosestools Год назад

Yeah that nova drill press is something else

@ikust007 Год назад

@@katzmosestools :))

@Keifsanderson Год назад

I've got my drill press set as slow as it will go and I don't change it because it's a hassle. I've kinda assumed slow will work for everything, even though it may slow production sometimes. Am I wrong?

@johnhawkinson Год назад

Very small drill bits need a high RPM to avoid wobbling and snapping. If that's not a problem, then nothing wrong with slow, other than obvious(?): slower material removal in some cases.

@Keifsanderson Год назад

@@johnhawkinson Thanks. I use my press 90% of the time on wood. What is your definition of "very small"? I don't think I've ever even had a bit less than an 1/8" in it.

@johnhawkinson Год назад

@@Keifsanderson Well, "small enough to snap" - if you're not snapping them, then you're good. But yeah, around 1/8" or 3/32" is where this usually manifests, but the exact size depends on how bad (or good) the workholding is, length of drill bit stickout, drill bit material, presence of a pilot hole or centerpunch, applied drilling force, plus some magic operator skill factor. Oh, and speed of the drill press, "as slow as it will go" can be quite a wide range from model to model.

@Keifsanderson Год назад

@@johnhawkinson Thanks for the input. I've never clocked my press, since I can't readily change it, and it's as slow as she'll run. It's an vintage/antique Buffalo. I guess I should go poke around Vintage Machinery and see if anyone has ever posted the specs.

@johnhawkinson Год назад

@@Keifsanderson Ideally you'd borrow a tachometer to measure it. But you can also check the motor RPM (Should be labeled! Usually 1800 or 3600 rpm) and do some simple math based on the pulley ratios. These days you can probably put a sharpie mark on the spindle (or maybe paste on a cool printout )and use a cellphone camera. Camera should do 30 or 60 fps and 300 rpm is 5 Hz, so even just counting frames would work.

@krawec1958 Год назад

What about plastic or plexiglass??

@disklamer Год назад

Go even slower, and ease in and back off every other rotation. Or you're peeling molten plastic off your bits, and believe you me, that is not a pleasant process.

@onjofilms Год назад

What happened at .43? It actually stopped for a second. Is that a cheap Chinese driver module running that drillpress?

@bodshal Год назад

The Nova Voyager does that now and then at low RPM, it overshoots the power slightly for whatever reason and then undershoots to compensate. Makes no practical difference in application in my experience.

@philipcatuogno2968 Год назад

Damn! You've got zoom-eyes. I didn't catch that.

@samwolf8151 Год назад

I wish you made this months ago. I had to drill many holes in wax impregnated hard wood. The wax would gunk up my bits.

@katzmosestools Год назад

Try the blade and bit cleaner we have in our store. Works so good for cleaning bits

@TheWt6012 Год назад

But my forstner bit has been stopping at slow rpm when it touches the material...

@katzmosestools Год назад

You need to feed slower

@barryomahony4983 Год назад

Loose belt

@katzmosestools Год назад

@@barryomahony4983 yeah definitely check that too

@TheWt6012 Год назад

@@katzmosestools sure

@TheWt6012 Год назад

@@barryomahony4983 Alright

@WalterRiggs Год назад

I just run all my forstners as the press’ slowest speed. If I’m in a hurry I’ll just go buy what I’m building from Target or something

@draztiqmeshaz6226 Год назад

You doing alright, buddy?

@nrengle Год назад

Why'd ya say router bits at the end?

@katzmosestools Год назад

Freudian slip

@velcroman11 Год назад

Most people think that the faster you run a drill bit is good, WRONG!!! Even with metal twist drills the drill should never run at more than 500 and that is probably too fast. You must give the bit time to bite into the material. Run faster burns the bit, wood or metal. Go fast press hard, that is if you want to start a fire to cook dinner.