10 Min tool repair: Replacing the battery in a Parkside / Lidl electric screwdriver

Подписаться 14 тыс.

Просмотров 36 тыс.

50% 1

As per title; replacing an expired battery in an electric screwdriver. A simple repair that will be similar on many different brands of tools.
**Please see the links below
LED Matrix (P5)
UK - amzn.to/2IWTxnU
USA - amzn.to/2KDLFoP
LED Matrix (P3)
UK - Currently OOS - Will update when avaliable.
USA - amzn.to/2ruFU5F
D1 Mini (4MB)
UK - amzn.to/2IuGYQF
USA - amzn.to/2jM8hI7
Kynar Wire
UK - amzn.to/2jOPyvL
USA - amzn.to/2KUiA9w
Here is the gear used in the build built -
Tenma ESD Soldering Station
UK - amzn.to/2rB8rFR
USA - amzn.to/2I5TUx8
BAKU PCB Jig
UK - amzn.to/2F8NVRL
USA - amzn.to/2Jl6LHE
858D+ Hot Air Reflow Station (Clone, £24)
UK - amzn.to/2qXrZUv
USA - amzn.to/2Hm2LKs
Ceramic tweezers
UK - amzn.to/2HqESNQ
USA - amzn.to/2HnTvFW
Solder paste
UK - amzn.to/2HJPXgo
USA - amzn.to/2Kc6t7s
By using the Amazon link(s) above you help support my channel - you get the same great price and customer service as you would do going direct, I get a small commission on your purchase which helps fund the channel!
Below, In no particular order, are some smaller electronics channels that I enjoy - have a look and consider subscribing to them!
Brian Lough- / witnessmenow
The Unexpected Maker - / @unexpectedmaker
David Watts - / mrdavidjwatts
DaveDarko - / @davedarko
Stephen Ludgate - / stephenludgate
Becky Stern - / bekathwia
MKme Lab - / mkmeorg
BlitzCityDIY - / @blitzcitydiy
Martyn Davies - / martyndavies
Jen FoxBot - / jenfoxbot
Sean Hodgins - / @seanhodgins
Hari Wiguna - / hwiguna

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@pileofstuff 5 лет назад

There are so very many simple repairs that people could be making. Good to see people mending rather than scrapping

$@ehsfrac$

@ehsfrac 3 года назад

Thanks for the video, very well explained! I have exactly the same screwdriver and it suddenly stopped working. Will try to replace the battery and check if it helps.

@timmyfingaz100 2 года назад

Nice set of skills you got there!!! I look forwards to watching some of your other vids!

@nikosaphotos4121 Год назад

I did swap it as well with a 3.000mAh one and it's quite powerful!

@threeMetreJim 4 года назад

When laptop batteries fail, it's often only one of the parallel sets that go bad and that stops the charging circuit charging them due to safety concerns. When you crack open a laptop battery, measure the voltages of the sets of batteries, you'll usually find one set that is really low and that is the defective one. The others are usually fine.

@HatsueBoyd 3 месяца назад

I would have liked your video to give guidance about the chances of the pcb being damaged. The charge light does not illuminate which I assume means the pcb is damaged but it may just be the battery. The charger is working.

@kjur18 5 лет назад

This cell might be high discharge current one, that's why it has lower capacity. Putting normal cells might be a bit dangerous, I would advice replacing battery, then some screwing around with normal usage and then battery temperature test, and then if cell is cold or mildly warm, then I would screw back the case.

@Allerick178 Год назад

Thank you for the great video. Now i know what to do. Thank you.

@slybunda Год назад

can get 2500mah samsung or other good brand cells for 6 quid and they are rated at 25amp draw which is gonna be a lot more than this thing can pull. will increase run time a fair bit.

@doncowie8653 2 дня назад

Does anyone know what charger is required for this tool, I have lost my charger and don’t know what to buy

@paulknowles9727 4 года назад

The exact vid i was looking for. Thanks. Any recommendations where to get batteries?

@FLFC77 5 лет назад

The middle of Lidl... 😂 stop it mate haha 👍🏼

@luke040655 4 года назад

I have the same screwdriver but I've lost the leaflet if you still have yours could you please tell me what is the Torque: N / M on it PS great video thank you

@tbelding 2 года назад

The main issue is that you do need a high discharge 18650, rather than a normal battery pack 18650. I personally used a NCR18650B from Panasonic to replace the IMR. (NCR means higher drain)

@ΠαναγιωτηςΦωκας Год назад

Did it boost a little at power or just only it has better capacity

@tbelding Год назад

@@ΠαναγιωτηςΦωκας - Same power, because the voltage (pressure) is identical. I've since replaced two other screwdrivers the same way. Capacity? I've never worried about it. 1900-2800? You aren't going to manage to use one of those THAT hard to run it dry before you plug it in again. If you are, you need a larger unit, like IKEA's 7.2 volt hand drill.

@ΠαναγιωτηςΦωκας Год назад

@@tbelding thank you very much for being so helpful, I really appreciate it 😉

@PortalAuditor Год назад

Can i change battery for new with biger mAh?

@michaelbaker6489 3 года назад

Nice vid ,I’ve got one that need a new battery and I am capable of soldering it ,please advise me as to where to buy a battery.

$@ehsfrac$

@ehsfrac 3 года назад

Google "18650", there are many different variants and you get what you pay for. The ones that accept high charge are often limited in the amount of current they can give and vice versa. For this application I would choose a battery that can deliver a high current (e.g. 10A, equals more torque).

@kjur18 5 лет назад

Even what seems to be a complicated thing might turn out to be really easy to fix. Or really difficult. Or impossible. Some time ago I repaired a 48" Sony Bravia TV. After turning it on, tv works, then after some time picture disappears. This might mean that something is wrong with video path. As EEVBlog says: Thou shall check voltages I found a chip that supposed to get 1.1V but was getting around 0.8V and then screen goes off this falls to about half a volt. The culprit was small 120mA LDO, that was put in circuit that was drawing about 135mA. No wonder that chip died. After replacing it with some more beefy part tv works without problems. And it was two weeks after warranty ended ;-)

@krzysztofbiaas243 3 года назад

You don't know, that the li-on from laptop won't give you proper torque? In this case more mAh is not allweys better choice.

@cipolin.poiana 5 лет назад

i have the same model. in the future i want to put it a 3200 samsung cell or lg to have a big range.. 1500mah it`s little bit and i need to charge it many times..

@ruinunes8251 4 года назад

Will the pcb handle the higher capacity cell? I also have one of these screwdrivers, just different brand.

@tbelding 2 года назад

@@ruinunes8251 If it physically fits, the PCB should handle it. You simply need to make sure you have a high discharge cell, like a NCR18650B (Panasonic). It may take a lot longer to charge, that's all.