Тёмный

100 Y-O Antique NIKE Swedish Jack! 100 Available In The World 

How To Restoration
Подписаться 21 тыс.
Просмотров 902 тыс.
50% 1

Hello, I hope you liked the video, a Nike 16HB Harvey Frost jack
This rather attractive jack is actually made by Nike in Sweden. Imported to England for supply via Harvey Frost.
It's described as a bumper jack, but apparently the lift arm fits perfectly into the square chassis tube.
Offered with Gordon-Cable cars from 1964 to 1966 (100 cars).
This antique jack was in the corner of the warehouse and I saw it was a good project for restoration, but I emphasize very much that it was very, very rusty. I separated the jack parts with difficulty and with the help of brake oil, the jack piston was stuck I took a lot of trouble to remove it from its place. After disassembling the jack parts, I washed them all well with detergent to remove any grease and then sandblasted them except for the jack cylinders.
Sandblasting did not work and I put them again in a pan of rust removal solution for 24 hours and completely removed them with a wire brush. I will remove the part that has a chain and goes up and down along with all its accessories and start the restoration from this part. I do it, it got stuck and it was very difficult to start, all the screws were released with difficulty and with the help of brake oil. And I sprayed the red paint that is used for most of the jacks on them. I polished some of the parts and then I painted a layer of chrome on them with electrolytic nickel chrome.
I opened and rebuilt the rest of the parts of my road that were very rusty with difficulty
welcome. My name is Behnam and this is the How to restoration channel. My grandfather was a carpenter and my father continued to do the same, and since I have lived with tools since I was a child, I have a strong interest in them. I believe that old tools It should not be thrown away, it should be restored and used again. I believe that everything that is older and has been made before has a solid structure and is very durable and made with principles. All tools today are mass produced with very low quality. My way of thinking is that I was born in 1990 and I will leave the world once, so I do what makes me feel good.I haven't tested many tools yet and I want to reach them one day and my art. I will create with those tools. I earn from RU-vid and if you want to support me in this way, I would appreciate it if you subscribe to my channel and follow the videos.
Subscribe 👇
/ @howtorestoration
Facebook : www.facebook.c...
TikTok : www.tiktok.com...
Contact Info: Howtorestoration@gmail.com
Restoration Antique Nike Swedish Jack! 100 Available In The World
Restoration Antique Nike Swedish Jack
antique jack restoration
old and rusty hydraulic jack restoration
rusty jack restoration
restaurar
old
rust
antique
vintage
restoring
rusty
restore
repairing
welding
woodworking
sandblasting
lathe
workshop
abandoned
diy
repair
restored
renovation
asmr
restorations
rescue
реставрация
pistol
restauration
tool
drill
broken
restauracion
ladb
cleaning
tysytube restoration
console restoration
bike restoration
restoration videos
wood working
rusty restoration
gun restoration
positive thinking
#restoration
#DIY
#craft
#antique

Развлечения

Опубликовано:

 

4 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 187   
@HowToRestoration
@HowToRestoration 5 месяцев назад
If you enjoyed the video, please like and subscribe to the channel for more videos. Thank you for your constant support❤️❤️
@АнатолийПлитка
@АнатолийПлитка 4 месяца назад
😊😊😊😊😊😊😊😊😊😊😊😊
@andrewloakes6069
@andrewloakes6069 4 месяца назад
It said on the sticker Gordon Cable, the car was Gordon Keeble. It was a hand built upmarket car with an American V8, a grand tourer.
@ReverendSoupbone
@ReverendSoupbone 5 месяцев назад
Fun restoration! A lot of different skills went into doing it and making it so nice in form and fiction. I don’t understand why people feel the need to “correct” someone on how they do this sort of work. This is how you wanted to do it and how far you wanted to restore/improve. Fantastic job!! Really enjoyed it.
@HowToRestoration
@HowToRestoration 5 месяцев назад
Yes, that's right, thank you for your understanding
@georgebrown8312
@georgebrown8312 4 месяца назад
I have never seen a jack like that before. Splendid restoration job you did on that Swedish jack. It looks much better and it works like a charm too. Excellent work.
@HowToRestoration
@HowToRestoration 4 месяца назад
Your support means the world❤️🙏
@YooToobz
@YooToobz 5 месяцев назад
Some don’t like it, but I like that you use filler to smooth rough surfaces. The Jack itself lets you know it’s old so making it look as new as possible is great. Very nice work. Especially with making a new hook. Well done 👍
@HowToRestoration
@HowToRestoration 5 месяцев назад
Your support means the world❤️🙏
@kiarestoration-t3y
@kiarestoration-t3y 20 дней назад
سلام و درود من هم تازه وارد این عرصه شدم خوشحالم که میبینم موفق شدی من از هشت ماه پیش پیگیرت بودم ❤❤❤❤
@HowToRestoration
@HowToRestoration 20 дней назад
@@kiarestoration-t3y بسیار عالی . امیدوارم در تمام مراحل زندگی خود موفق باشید . راز این است / سخت بکوشید . انشالله موفق خواهید شد .❤️😉
@scottcates
@scottcates 5 месяцев назад
I enjoyed the brazing. Many restoration amateur hacks will weld cast iron, which creates majorly _reduced_ strength in the heat-affected weld zone. Nicely done here.
@HowToRestoration
@HowToRestoration 5 месяцев назад
👌👏
@serafimpinho7532
@serafimpinho7532 3 месяца назад
Excellent work
@HowToRestoration
@HowToRestoration 3 месяца назад
Your support means the world❤️🙏
@АлексейТищенко-ч5щ
@АлексейТищенко-ч5щ 3 месяца назад
Интересно смотреть, как предметы получают вторую жизнь, браво!!!
@HowToRestoration
@HowToRestoration 3 месяца назад
🙏❤️
@OldSkoolF
@OldSkoolF 2 месяца назад
cool jack and nice work.. I would never use it with a painted lift rod.
@HowToRestoration
@HowToRestoration 2 месяца назад
Me neither
@rycho662
@rycho662 4 месяца назад
Great job!!!!! The film is very well EDITED, but some general plans are missing. And a show of how this jack works would be useful. Greating from Poland.
@HowToRestoration
@HowToRestoration 4 месяца назад
That’s so kind of you🙏🙏
@scottcates
@scottcates 5 месяцев назад
*Outstanding Video:* Good camera work and editing. The close-ups really stand out nicely.
@HowToRestoration
@HowToRestoration 5 месяцев назад
Thank you very much!
@okramw1
@okramw1 4 месяца назад
Some extremely good REPAIRS/restoration👏. I believe some have a problem with the word "Restoration" because of the difference in meaning between the words.👍
@HowToRestoration
@HowToRestoration 4 месяца назад
Great point!
@ajaychebbi
@ajaychebbi 5 месяцев назад
Fantastic restoration
@HowToRestoration
@HowToRestoration 5 месяцев назад
Many thanks!
@bodiejay2859
@bodiejay2859 5 месяцев назад
Beautiful restoration. I love it. ~Kevin
@HowToRestoration
@HowToRestoration 5 месяцев назад
Thank you very much!❤️
@medina1251
@medina1251 5 месяцев назад
I have one that is fully funktionel in my shop,nice to see that im not alone,😀
@HowToRestoration
@HowToRestoration 5 месяцев назад
😁👬
@marc3526
@marc3526 3 месяца назад
What is it made for ???
@HowToRestoration
@HowToRestoration 3 месяца назад
chassis
@MASI_forging
@MASI_forging 4 месяца назад
Such a great restoration 👍👍
@HowToRestoration
@HowToRestoration 4 месяца назад
Thanks bro
@vladimirtoshev5533
@vladimirtoshev5533 4 месяца назад
Перфектна работа. Браво.
@HowToRestoration
@HowToRestoration 4 месяца назад
That’s so kind of you🙏🙏
@marcelonavarta483
@marcelonavarta483 4 месяца назад
Excelente trabajo, mucha dedicación y precisión. Felicitaciones!
@HowToRestoration
@HowToRestoration 4 месяца назад
Your support means the world❤️🙏
@franciscobenitoflores4622
@franciscobenitoflores4622 2 месяца назад
Tuve un gato de esos para mi Wagonner, EXCELENTE!!
@HowToRestoration
@HowToRestoration 2 месяца назад
Thank you! ❤️😉
@СергейБогатский-ф4й
@СергейБогатский-ф4й 3 месяца назад
Сам люблю что нибудь реставрировать, интиресный процесс увлекает и люблю наблюдать . Всем удачи и интересных роликов.
@HowToRestoration
@HowToRestoration 3 месяца назад
Your support means the world❤️🙏
@pavelkoudele5526
@pavelkoudele5526 4 месяца назад
6:17 Zatuhlý řetěz nejlépe vyčistíš ponořením do nafty, nebo do petroleje. Pěkná renovace zvedáku. Pavel 🇨🇿
@HowToRestoration
@HowToRestoration 4 месяца назад
🙏👍
@MrMmony
@MrMmony 2 месяца назад
good job
@HowToRestoration
@HowToRestoration 2 месяца назад
I’m so grateful❤️🙏
@daniloweifu9566
@daniloweifu9566 4 месяца назад
Sehr gute Arbeit. Ich finde löten oder verzinnen besser als Spachtelmasse. Aber egal, toll gemacht. ❤🤠🤘
@HowToRestoration
@HowToRestoration 4 месяца назад
Danke lieber Freund
@adamw.20
@adamw.20 5 месяцев назад
...Du machts echt perfekte sache in sachen restauration mit viel Liebe und besser wie Neu....👍👍👍
@HowToRestoration
@HowToRestoration 5 месяцев назад
Das ist so nett von dir🙏🙏
@ribeirosilva6576
@ribeirosilva6576 28 дней назад
Bom dia. Meus parabéns você é diferenciada que Deus abençoe sempre sua vida e sua profissão.
@HowToRestoration
@HowToRestoration 28 дней назад
Thank you brother, God bless you and your family. Thank you very much🙏❤️
@lennoxramberran1459
@lennoxramberran1459 5 месяцев назад
That is a masterpiece, great restoration, viewer from trinidad
@HowToRestoration
@HowToRestoration 5 месяцев назад
Thanks so much
@joshthecomputertech
@joshthecomputertech 4 месяца назад
"If it's Swedish, it's still broken." - Finland 😂
@HowToRestoration
@HowToRestoration 4 месяца назад
It's not, this jack is great
@joshthecomputertech
@joshthecomputertech 4 месяца назад
@@HowToRestoration it's a Finnish joke, dont worry about it
@HowToRestoration
@HowToRestoration 4 месяца назад
@joshthecomputertech I did not know that 😄
@jamesfield5346
@jamesfield5346 3 месяца назад
Hello, I have taken apart many antique and rusty old stuff and never once have I had a teardown where something didn't go flying somewhere. How would I help to minimize this a little?
@HowToRestoration
@HowToRestoration 3 месяца назад
I did not understand your question
@jamesfield5346
@jamesfield5346 3 месяца назад
@@HowToRestoration sorry about that. I was wondering how you knew where everything was. Springs bearings. I would have lost one.
@HowToRestoration
@HowToRestoration 3 месяца назад
Everyone has their own job and must be very skilled in their work and know that being a craftsman must be in a person's blood and inherited from their grandfather and father.❤️🙏
@ГумарНафиков-д7р
@ГумарНафиков-д7р 3 месяца назад
,Да в народе говорят: у вас руки на месте, Молодец!
@HowToRestoration
@HowToRestoration 3 месяца назад
Your support means the world❤️🙏
@guillermogalan5088
@guillermogalan5088 5 месяцев назад
Trabajo bien hecho. !!!!!!!!!
@HowToRestoration
@HowToRestoration 5 месяцев назад
❤️🙏
@scottcates
@scottcates 5 месяцев назад
Watching the fresh weld shrink at 9:06 is really interesting.
@HowToRestoration
@HowToRestoration 5 месяцев назад
I hadn't noticed myself, now I see😁
@oneshotme
@oneshotme 5 месяцев назад
I very much enjoyed your video and I gave it a Thumbs Up
@HowToRestoration
@HowToRestoration 5 месяцев назад
🙏❤️
@allffl3793
@allffl3793 5 месяцев назад
Cavolo è meglio del originale! Bravo.
@HowToRestoration
@HowToRestoration 5 месяцев назад
I appreciate it 😁
@TheStig1961
@TheStig1961 5 месяцев назад
Good restoration. By the way, made in Sweden. Closer to me😊. Regards Stig Österberg from Dalsbruk in Finland.
@HowToRestoration
@HowToRestoration 5 месяцев назад
yeah 👍 Your support means the world❤️🙏
@bandplop6162
@bandplop6162 4 месяца назад
Hortlot bei Guss, Stahlblech kann man auch mit Acetylen/Sauerstoff schweißen, braucht eine sehr kleine Spitze.
@HowToRestoration
@HowToRestoration 4 месяца назад
That’s so kind of you🙏🙏
@kjellringstrom6217
@kjellringstrom6217 4 месяца назад
Newer heard them be called Knekt before. A Stövel Knekt is that thing you use to pull your bots of with. Where I live we would call that thing a Domkraft.
@HowToRestoration
@HowToRestoration 4 месяца назад
Your support means the world❤️🙏
@AyazRestoration
@AyazRestoration 5 месяцев назад
Great restoration
@HowToRestoration
@HowToRestoration 5 месяцев назад
I appreciate it❤️🙏
@СиСиКэпвелл-р3ж
@СиСиКэпвелл-р3ж 5 месяцев назад
Мастер ты красавчик 👍
@HowToRestoration
@HowToRestoration 5 месяцев назад
Если вы имеете в виду мой тип и одежду, я должен сказать нет, это противоположно тому, что вы думаете, и моя рабочая одежда маслянистая.😁😁🤷🏻‍♂️
@СиСиКэпвелл-р3ж
@СиСиКэпвелл-р3ж 5 месяцев назад
@@HowToRestoration я имел ввиду то, что вы делаете своими руками.
@williamstephens9945
@williamstephens9945 4 месяца назад
Yay, green oil
@MännerbudenWohnzimmerGarage
@MännerbudenWohnzimmerGarage 4 месяца назад
Super top
@HowToRestoration
@HowToRestoration 4 месяца назад
@paoloantolini6890
@paoloantolini6890 4 месяца назад
Bravissimo ma ti faccio una domanda. Dove hai trovato le parti in gomma? Credo sia stata la cosa più difficile.
@HowToRestoration
@HowToRestoration 4 месяца назад
I left the rubber parts and packaging to my friend and he did it for me.
@paoloantolini6890
@paoloantolini6890 4 месяца назад
Sarebbe interessante capire come ha fatto a realizzarle, soprattutto quella del pistone che ha un profilo molto particolare. Grazie per la gentile risposta
@jasonsummit1885
@jasonsummit1885 4 месяца назад
So it's a hydraulic high lift jack for 4x4 vehicles?
@HowToRestoration
@HowToRestoration 4 месяца назад
Yes 👍
@rod1001
@rod1001 5 месяцев назад
Molto bello! 👍 cosa usi per annerire il gancio?
@HowToRestoration
@HowToRestoration 5 месяцев назад
Super blue
@pierrebonneau7785
@pierrebonneau7785 4 месяца назад
COMME TROP SOUVENT UNE FOIS LA RESTORATION FINIE?ON NE PAS A QUOI CELA SERT.....
@salvadorblascogonga8204
@salvadorblascogonga8204 5 месяцев назад
Estas son herramientas que cuando el que las usa lo despiden, se va de la empresa o se jubila las arinconan por que nadie sabe manejarlas bien. Y es una lastima que no sigan en servicio.
@HowToRestoration
@HowToRestoration 5 месяцев назад
Se coloca en la colección. 🙏🙌
@kabinetshabgirnia5381
@kabinetshabgirnia5381 5 месяцев назад
Well done 👍
@HowToRestoration
@HowToRestoration 5 месяцев назад
Thank you! Cheers!
@behnamshabgirnia1096
@behnamshabgirnia1096 5 месяцев назад
Nice work 👍👌
@HowToRestoration
@HowToRestoration 5 месяцев назад
I appreciate it❤️🙏
@junkname9983
@junkname9983 4 месяца назад
no way i'd trust that brazing repair to last. Strong as it may be, it'll fail again. That hook is much too weak. it's probably a fundamental problem with this design to begin with.
@HowToRestoration
@HowToRestoration 4 месяца назад
This jack is a collectible and has its place in the collection and is not supposed to work anymore. It is now retired.
@خالدالبيومي-ظ1ز
@خالدالبيومي-ظ1ز 5 месяцев назад
Perfect❤
@HowToRestoration
@HowToRestoration 5 месяцев назад
🙏❤️
@andrewloakes6069
@andrewloakes6069 4 месяца назад
I think you mean Gordon Keeble?
@HowToRestoration
@HowToRestoration 4 месяца назад
I don't know much about this jack, if you have correct information about this jack, please email me or write me in the comments section so that I can update the information, thank you very much.
@andrealves9786
@andrealves9786 4 месяца назад
top;...!
@HowToRestoration
@HowToRestoration 4 месяца назад
❤️🙏
@BehnamShabgirnia
@BehnamShabgirnia 5 месяцев назад
So nice 👍
@HowToRestoration
@HowToRestoration 5 месяцев назад
I appreciate it❤️🙏
@prostosilver8834
@prostosilver8834 5 месяцев назад
Коммент в поддержку канала
@HowToRestoration
@HowToRestoration 5 месяцев назад
Your support means the world❤️🙏
@soorenakhan
@soorenakhan 3 месяца назад
The 3500-year civilization of Persia
@HowToRestoration
@HowToRestoration 3 месяца назад
Bale Ma inim !😃
@soorenakhan
@soorenakhan 3 месяца назад
​@@HowToRestoration❤
@СергейАндреев-б1ш
@СергейАндреев-б1ш 5 месяцев назад
Необычный инструмент удача что он попал именно к вам 🎉
@HowToRestoration
@HowToRestoration 5 месяцев назад
Удача, должно быть, приняла меня за кого-то другого!
@behnamshabgirnia1343
@behnamshabgirnia1343 5 месяцев назад
so nice video
@HowToRestoration
@HowToRestoration 5 месяцев назад
That’s so kind of you🙏🙏
@IZSIBIRIYA77
@IZSIBIRIYA77 4 месяца назад
Мне кажется что ногу шпаклевать и тем более красить это странная работа. Ведь по ней будет перемещаться механизм (зажим) и эта вся краска слезет очень быстро и начнет ржаветь, ведь этому домкрату дана вторая полноценная жизнь. А если не собирался использовать его по назначению то какой смысл был вообще реставрировать внутренний механизм для создавания давления? Ногу лучше было покрыть химическим воронением.
@HowToRestoration
@HowToRestoration 4 месяца назад
Так нарисовал производитель, а этот разъем входит в комплект и его использовать нельзя.
@rosendomesaorta5024
@rosendomesaorta5024 28 дней назад
0:38 0:45 0:48 no sabía que los gatos llegaban a los 100 años.
@HowToRestoration
@HowToRestoration 28 дней назад
😁❤️😉
@ГенаТанкист-ш5л
@ГенаТанкист-ш5л 5 месяцев назад
Дуже гарна робота. ❤
@HowToRestoration
@HowToRestoration 5 месяцев назад
So thanks bro❤️
@אבידןנעמן
@אבידןנעמן 5 месяцев назад
Nice job. But there is something that doesn't work for me. The hook is made of cast steel and has probably undergone some kind of reinforcement. How can you weld welding steel to it??
@HowToRestoration
@HowToRestoration 5 месяцев назад
This jack is not supposed to be used and should be kept in the collection because there are only 100 of them made in the world.
@sergioeduardocancionlillo2610
@sergioeduardocancionlillo2610 4 месяца назад
Ese gato lo traían los for y chevrolet del 70
@HowToRestoration
@HowToRestoration 4 месяца назад
What year exactly do you know about this jack?
@РинатСаликов-м6щ
@РинатСаликов-м6щ 3 месяца назад
👍🙂👍
@HowToRestoration
@HowToRestoration 3 месяца назад
🙏❤️
@efimkrivov
@efimkrivov 5 месяцев назад
1966?
@HowToRestoration
@HowToRestoration 5 месяцев назад
Yes
@efimkrivov
@efimkrivov 5 месяцев назад
@@HowToRestoration but you told us it was a 100yrold jack..
@HowToRestoration
@HowToRestoration 5 месяцев назад
@@efimkrivov Dear friend, it was imported to England from Switzerland on that date by a person named Harvey Frost. This is an antique and I couldn't find any info on this jack on google or the rest of the internet!
@84Tysken
@84Tysken 4 месяца назад
The rubber handle is a dead give away this isn't that very old.
@SuperMario9988777
@SuperMario9988777 4 месяца назад
Может пора обзавестись пескоструем???
@HowToRestoration
@HowToRestoration 4 месяца назад
Я скоро сделаю это сам !😁
@nature-agriculture-with-Esi
@nature-agriculture-with-Esi 5 месяцев назад
Are you Persian?
@HowToRestoration
@HowToRestoration 5 месяцев назад
Yeah bro
@nature-agriculture-with-Esi
@nature-agriculture-with-Esi 5 месяцев назад
@@HowToRestoration that's awesome man I saw that Iran Potk hamer 😁 You did well 👏👏
@HowToRestoration
@HowToRestoration 5 месяцев назад
@@nature-agriculture-with-Esi 🤷🏻‍♂️ That’s so kind of you🙏🙏
@PRO-nm7gp
@PRO-nm7gp 4 месяца назад
Шпакля это уже лишнее...
@HowToRestoration
@HowToRestoration 4 месяца назад
Your support means the world❤️🙏
@ak-rc7eq
@ak-rc7eq 4 месяца назад
「樹齢」ってどういうことだよ(笑)
@Feanor2
@Feanor2 3 месяца назад
Вот вроде все хорошо. И старинный инструмент, и интересная конструкция, и внимание к деталям, но… ЧЕРТ, НУ ПОЧЕМУ ТАКОЕ ГЛУПОЕ ИСПОЛЬЗОВАНИЕ ИМЕЮЩИХСЯ СТАНКОВ??? 1. У тебя есть токарный станок. Нахрена было зажимать деталь в сверлильный станок для чистки? 2. У тебя есть пескоструй. Для чего ты половину деталей чухал щеткой, а штангу и вовсе засунул в токарный и чистил болгаркой? 3. Ну и вишенка, конечно, это сварка чугуна с говнилином ЭЛЕКТРОДОМ. С последующей нудной зачисткой напильником. Не, я сам так иногда делаю. Но. А) В неответственных местах, Б) болгаркой (ибо мое время дорого). Деталь надо было изготавливать заново ЦЕЛИКОМ, ибо сварка на чугуне работает плохо (лопается).
@HowToRestoration
@HowToRestoration 3 месяца назад
Все детали совершенно правильные, но та деталь не чугунная, а железная, и сварной шов, который был на ней ранее сделан, - чугунный. Кроме того, у меня нет токарного станка или пескоструйного аппарата, у меня есть такие хорошие друзья, как вы, от которых я получаю помощь. Спасибо❤🙏
@Feanor2
@Feanor2 3 месяца назад
@@HowToRestoration тогда, уж коли вы занимаетесь реставрацией старинного инструмента, пескоструй - первое, приобретением чего стоило бы озаботиться. Чтобы по друзьям не бегать.
@HowToRestoration
@HowToRestoration 3 месяца назад
@@Feanor2 Я планирую сделать песчано-бластер самостоятельно, потому что у меня в мастерской есть железные листы, и я хочу их использовать.
@میثمشفابخش
@میثمشفابخش 5 месяцев назад
حرف نداری پسر 👏👏👏👏👏👏👍👍👍
@HowToRestoration
@HowToRestoration 5 месяцев назад
That’s so kind of you🙏🙏
@michaelprochaska6907
@michaelprochaska6907 5 месяцев назад
Gordon-Cable? Not Gordon-Keeble? I looked up Gordon-Cable but only found Gordon-Keeble which made just 100 cars from 1964 to 1967 (and had a seriously cool logo which featured a tortoise even though the Corvette-engined cars were actually fast, lol.)
@HowToRestoration
@HowToRestoration 5 месяцев назад
Thanks
@rugickgame6052
@rugickgame6052 5 месяцев назад
Зачем ?
@HowToRestoration
@HowToRestoration 5 месяцев назад
Потому что всего их было сделано 100 штук.
@Jerry1664Bnez
@Jerry1664Bnez 4 месяца назад
unpointing drill 😉
@HowToRestoration
@HowToRestoration 4 месяца назад
I’m so grateful❤️🙏
@Hadisshb84
@Hadisshb84 5 месяцев назад
Good job bro👌👌👌
@HowToRestoration
@HowToRestoration 5 месяцев назад
Thank you so much bro
@rogerpatrongonzalez5800
@rogerpatrongonzalez5800 5 месяцев назад
👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏a real beauty!!!
@HowToRestoration
@HowToRestoration 5 месяцев назад
That’s so kind of you🙏🙏
@neilhaas
@neilhaas 5 месяцев назад
🇸🇪🇸🇪🇸🇪🇸🇪🤗🤝😊🤓😎🤩😁😀💯❤
@HowToRestoration
@HowToRestoration 5 месяцев назад
I appreciate it❤️🙏
@JoseContreras-ph6nz
@JoseContreras-ph6nz 5 месяцев назад
👍🤗🙏🏻🇻🇪
@HowToRestoration
@HowToRestoration 5 месяцев назад
❤️🙏
@84com83
@84com83 4 месяца назад
Question about the title: what is "svenska knekt"?
@HowToRestoration
@HowToRestoration 4 месяца назад
Apparently, he wants to translate the concept of Sweden into Swedish (Google Translate). Other languages ​​are translated by artificial intelligence, so it is not expected.
@lostcabrio
@lostcabrio 5 месяцев назад
Good job, but slightly over restored. As a lot of RU-vid restorers do. Don’t use filler on a rough casting, takes the character away.
@HowToRestoration
@HowToRestoration 5 месяцев назад
I myself am sensitive about this issue and I never want to destroy the originality of the product. The purpose of the filler is to make the piece look a little cleaner.
@zeitlerusmc
@zeitlerusmc 4 месяца назад
Interesting opinion, but that it is I feel it looks better.
@weiwang9622
@weiwang9622 4 месяца назад
I hate the rough casting especially rusted ones. So it's just personal opinions.
@pavloszimbrakos4410
@pavloszimbrakos4410 14 дней назад
@@HowToRestorationI think you’re both wrong sand it weld it and mirror polish the heck out of that thing
@mandirali42
@mandirali42 4 месяца назад
Tamir senaryosu çok kötü
@HowToRestoration
@HowToRestoration 4 месяца назад
I’m so grateful❤️🙏
@JustinMiales
@JustinMiales 4 месяца назад
I want hand tool rescue he's better
@HowToRestoration
@HowToRestoration 4 месяца назад
Your support means the world❤️🙏
@JustinMiales
@JustinMiales 4 месяца назад
To jack up my 100 year old horse
@HowToRestoration
@HowToRestoration 4 месяца назад
Your support means the world❤️🙏
@Serega.A
@Serega.A 3 месяца назад
Хуэво
@HowToRestoration
@HowToRestoration 3 месяца назад
🤷🏻‍♂️❤️
@borodatipizdat
@borodatipizdat 4 месяца назад
Странное движение напильником при обработке округлых поверхностей)
@HowToRestoration
@HowToRestoration 4 месяца назад
I’m so grateful❤️🙏
@phildivirgilio6286
@phildivirgilio6286 5 месяцев назад
Great job " and keep using the filler"!👍😉
@HowToRestoration
@HowToRestoration 5 месяцев назад
That’s so kind of you🙏🙏
Далее
1930s Gearbox Bike - Restoration
33:58
Просмотров 4,9 млн
I Restored an Uzbek Knife - & It's a Work of Art
18:02
Просмотров 463 тыс.
1871 Candy Drop Roller Restoration - Thomas Mills
22:39
Sailors' Old Windproof Lighter Restoration
19:30
Просмотров 40 тыс.
ОТКАЗАЛИ ТОРМОЗА #shorts
0:27
Просмотров 6 млн
ОТКАЗАЛИ ТОРМОЗА #shorts
0:27
Просмотров 6 млн