I started with a V0.0 Kit from Aliexpress (now it's 0.1, which is better in any respect)*:
Formbot Voron V0.1 Kit (AliExpress) bit.ly/39kfWdC
LDO Voron V0.1 KIT (Caribou3D) bit.ly/3KBxqzL
Recommended Kits for bigger DIY printers:
Voron 2.4 Kit (AliExpress) kit bit.ly/3PklmWE
Voron Trident Kit (AliExpress) bit.ly/3yxMaNe
STL files, instructions and BOM on the recent upgrades:
247printing.gu...
Support my work at Patreon:
/ 247printing
My Instagram and Twitter - more about my doings and behind the scenes:
Instagram: / 247printing
Twitter: / 247_printing
Watch the print at 1100mm/s:
• Shorts
💚Pizza, Beer and Coffee helps me going on💚
paypal.me/247p...
💚Thanks to all who support/ed my work💚
---------------Settings:
Filament: ESUN ABS+ - a great choice filament for strong parts and easy printing
amzn.to/3Bi0x7k
T_Hotend = 290C
T_Bed = 90C
Requested Speed: 1000mm/s
Acceleration: 35.000 mm/s²
square_corner_velocity: 15mm/s
Nozzle: 0.4mm
Layer Height: 0.1mm
Line width: 0.4mm
Volumetric flow: 40mm³/s
Lengths of straights: 65mm
Lengths of printing @ REAL 1000mm/s: 35mm
Xxxx ALL DESIGNS AVAILABLE SOON xxxX
@ Voron Users / Thingiverse
******UPGRADES STAGE 1 on my Voron V0 - VIDEO DEEP DIVES and ANALYSES incoming:
For years now, I use BigTreeTech/BIQU products - very much recommended:
(I was sponsored with an Octopus Board V1.1, TMC2209, 70W Heater and PT1000 thermistor)
Get the Octopus Board here:
bit.ly/31kKCrj
-MOTION (Part 1: Video Deep Dive incoming)
Nema14 spec Voron V0.1 @1.7A (OMC 14HS20-1504S)
amzn.to/3kBO5tm
F623 bearings instead of toothed idlers
amzn.to/2UktSgZ
WD40 specialist dry lubricant for rails (PTFE)
amzn.to/3ziGaF4
Gates-LL-2GT 6mm belts
amzn.to/3kCaAht
- EXTRUSION: (Part 2: Video Deep Dive)
Slice Engineering Mosquito Magnum (5% off!): www.sliceengin...?p=rkjO5IsbY
VolcoMosq Block (+9mm melt): • How did I end up with ...
E3D Hemera (Bowden config)
amzn.to/3zdvAzk
Capricorn Bowden Tube
amzn.to/3kBrgWE
50W heater (24V)
amzn.to/2UmOIwa
PT1000 temp sensor
amzn.to/3ivfdY2
Boron Nitride Paste @ heater, thermistor and heat break
amzn.to/3kvPem6
- COOLING (Part 3: Video Deep Dive)
4010 blower fans (24V), updated toolhead
amzn.to/3irazKT
optimized air ducts for part cooling with aluminium tape insulation
amzn.to/3zhbuEs
External Static Cooling: 4x4020 fans (24V)
amzn.to/3zcap0D
4x40mm heatsink at AB stepper motors
amzn.to/3irvLAh
2x 4020 / or 4010 fans (5V) at heat sinks (stepper motors)
amzn.to/3wOmfMJ
25mm axial fan (5V) for stepper drivers
amzn.to/3eDf4AW
- Software / Firmware / Controllers (Part 4: Video Deep Dive):
Klipper
www.klipper3d....
Raspberry Pi Zero W (Mainsail)
amzn.to/3xR9l21
Raspberry Pi 3B (Input Shaping and Octoprint)
amzn.to/2UwIMAu
Alternative: Raspberry Pi4:
amzn.to/3kBt4io
Simplify 3D: multi processes used
www.simplify3d...
-------------------------------------------------------
My modest video gear*:
iPhone 11 Pro: amzn.to/2VZYswJ
Smartphone video rig: amzn.to/3iriub5
GoPro Hero 9: amzn.to/2UZI9Q5
FLIR ONE PRO: amzn.to/2UWAe67
Similar to the soft boxes I use: amzn.to/3xRes2d
Similar to the tripod I use: amzn.to/2V1I6mw
*Amazon links are affiliate links at no extra costs for you!
#JoinTheSpeed
#247printing
#volcomosq
#SpeedBoatRace
12 сен 2024
