#101 

Beautiful tractor, respect to you for keeping it immaculate. Hope to have one soon and love to take care of it the way you do. Cheers.

I like the fuel tank placement, and the filter screen.

Great review! I have about the same amount of hours on my 3510, just under 300. I've been pretty happy with mine as well. Good to see you've had a similar experience so far. Thanks for sharing

Excellent review. I’ve been thinking about doing something similar on my 3510. The only issue I’ve had on mine in 200 hours is the hazard lights being incredibly flimsy. Broke the first trip into the woods with a low hanging branch.

Great tractors, my nephew has owned that model for 3 yrs. without a problem, he has a cab with heat and air, but no backhoe. They are major competition to JD and Kubota. NICE!!! Thanks from Georgian Bay

I have a CK3510HST and have had problems with the fuel inlet filter. I've had to fish it out 3 times. I use a piece of steel brake line and make a dog catcher by running .030 welding wire down the tubing making a loop noose. Tricky but can be done. I bought a 55 gallon tank and pump mounted to a homemade skid. Problem solved.

Nice job. Good stuff.

Very helpful info. Thank you.

Nive video. I'm getting that model and the walk through was good.

Your are keeping your tractor extremely clean, I can see grease around cylinder pins and grease points shows strict maintenance to the book Very honest review and thanks for the video

Outstanding review

Hey I really appreciated the review and how you got to the point. I also want to ask you what you used to make the video in terms of your camera and mic because I thought the production on this video was outstanding. Your voice, lighting and clarity of focus was just perfect.

So I have a 2017 CK3510 and your review is spot on. A great tractor. Some issues that I've had are: same grease fitting bolt loosening issue, same fuel tank screen pushed into the tank issue (same way as you), top link bracket bolts fell out (they are too short from Kitoi, I recommend replacing them with longer grade 10.8 bolts with locktite blue), cracked subframe for the backhoe (Kioti repaired it even after warranty because it is a known issue - I also now connect the top link to the backhoe under the seat - I HIGHLY recommend that you do this as other manufacturers now (LS tractor, etc.) do this), torn shifter boot from the factory and general loosening of bolts. You have to torque every 10 hours when you grease. I also have about 300 hours on it and love the tractor. Well built for it's class.

Fantastic video I've watched it at least 3x now in the years I've been researching what tractor to get. Can you comment on the loader controls - I've heard that these do not have an 8-way loader control where you can lift/curl at the same time. I've been borrowing a friend's Kubota for years and this is a great feature and I'm constantly multitasking the loader/bucket control. I did purchase a CK3510SE/Cab and should be ready in a couple weeks.

I love how you take good care of your equipment and have a clean shop! I may have asked you before, but approx. how often in run hours does your 3510 regen? Thanks. Enjoy your channel.

Enjoyed it, however I missed where the cup holder is located😜

Are you sure it has 286 hours on it? Still looks new! Great job keeping it nice. 😀 I appreciate your thoughts on the backhoe on and off challenge. The 3510 is still in the running for me.

I bought a previously owned 2015 Kioti 3510 w/loader and no regeneration garbage on it I did need to get used to the confined positions compared to my Kubota 5240 Two months and 25 added hours and I am very pleased. I can run my WoodMaxx 9900 wood chipper which surprised me. I like both my Orange machines. Oh, look for a funnel with a long flexible spout.

I think you enjoyed that tractor a lot!,,,

Helpful review during my search for the right brand and size. Thanks much. I particularly enjoyed your warning sticker on the right side. 😆

Nice review. I have had a few issues myself but minor and Kioti took care of them. Two were my fault of just using the machine. I only got 49 hours on mine though and not quite a year yet. It has just rain so much here.

You can weld on/rig up some heavy expanded metal to that brush guard for branch protection.

Just bought one just like it!!!!

I have the same tractor and agree on the oil fill cap- couldn’t they make it more accessible?

The “pto switch” is labeled as the “AUTO/MAMUAL” switch. Be ware of it if you DON’T use it all the time. My dealer set mine to auto during service and I could not get the pto to engage and thought he had messed up my machine! (I finally found the switch set to AUTO, swapped to MANUAL, and went on).

Thank you! Do you have to clutch when going from low to Med range and engaging the 4 wheel drive or Diff lock? Can't find it in my manual anywhere as it pertains to the hydrostatic trans.

Thanks for the review. Does the "auto PTO shut-off" have a brake on the PTO shaft? I have a NH3 TC33D and my PTO continues to run for 30-60 seconds after I shut it off when I'm using mowers and tiller, so an electric switch to disconnect somehow would not stop the rotating of the PTO shaft. Just trying to figure out how these new tractors work. Thanks, Paul

17:13 - Rear Differential. Have you ever had trouble making it engage? I've had my CK3510SE for a few months and have NEVER been able to get it to engage. I'm hoping to figure it out on my own because my dealer is 2-hours away.

Great review - have you had any issues with ground clearance with the BH subframe? It's one of the bigger things holding me back from a CK (vs other more integrated subframe designs)

I would love getting a CK3510SE Cab or the BobCat 2535. Same tractors. Only big problem and it's a big problem. The nearest dealer for either the Kioti or BobCat is more than 200 miles form me. I have many other makes John Deere, Kubota, LS, Rk Bronson and so i=on with in 30 miles from me. I know all makes will have problems. But having a Dealer over 200 miles is a big problem. I haven't checked to see in any of the other makes will work on a Kioti and if so will they take the warranty.

I have a 2011 ck35hst. The fuel tank is under the hood. I think under the hood is a more convenient location. Otherwise this updated version looks very nice. The 2011 version is a 2 peddle version. I think I'd prefer your 3 peddle!

Have the cab model. Love it to death. It eats up coolant but we run it hot to death. First year got over 900 hours and she’s still running strong at 3700 hours. We service it religiously daily and the only thing that’s ever gone south is the link pedal quit working. Took a computer flash to work out

You mentioned the throttle link system. I am wondering, does it automatically engage and disengage? If so, can you manually shut it off when you want full throttle for the pto while driving? I mow very steep hills on our property where I need constant rpm to the pto but would need to be in and off the throttle so to speak.

Curious if you ever considered the 2610 and if so, what made you go for the 3510?

Should have cut that hydraulic line block into so if it happens again you only have remove block bolts.

I think kiote shud build a universal under frame that accepts a backhoe and snow blower. I have a snow blower but no way will buy the backhoe because it’s a royal pain to switch the frame brackets.

That shows no wear I can see. How do you have almost 300 hours and no wear? I have 190 hours on mine and the tires are worn down, the paint on the step is rubbed off, brake pedal paint rubbed off, and various rub marks. All around the loader. I have worked hard with mine and the only issues I have had are bolts falling out periodically after long hours in the field. I have to go over every morning to prevent loss of them.

Don’t care for fuel tank location, hyd. Quick couplers are to hard to get to. That canopy looks narrow!?

How much weight will the backhoe lift. I cannot find the boom lift spec anywhere. Thanks. Nice video.

I am debating between a Kioti, or Massey F. Any recommendations?

Hi my friend this is Kevin from Arizona I own ck 4010 I wanted to inform you of a problem the DPF filter is a bad thing two times I have had to take it to the dealership for them to reset the computer to regin it DPF restricts the flow of air that can damage motor and something the dealer never told me about and if you clean filter also blow out two lines to sensor every three hours I have to regin what a waist of time Diesel is supposed to smoke and restrictions on air going in and exhaust loss of power damaged motor code won't clear itself like a car filter cleaned spotless a orb 2 won't work

How tall is canopy? Max height?

What brand canopy ???

what is the regen??? This is what melted this plastic..

All Sud koreano...tractorez...son que tu...mahinney

Outstanding review