103 - Intro to Flush Trim Bits

Подписаться 867 тыс.

Просмотров 330 тыс.

50% 1

Watch our newest video: "A Fancy Dead Blow Hammer, a Back-Saving Quick Lift, and a Bargain Router Plane | Tools Unleashed 02 "
• A Fancy Dead Blow Hamm... -~-
This video was originally published on October 15, 2009 & was never added to RU-vid...until today!
Original post on our site with additional information, plans, questions & comments: www.thewoodwhisperer.com/video...
A brief introduction to the world of flush trim bits. Flush trim bits come in all shapes and sizes, but they all share the same basic anatomy. After watching this video, you'll have a much better idea of which ones to buy and when to use them. I also do a quick demo using a pattern bit (a variation of the flush trim bit).
This video accompanies an article what was published in Popular Woodworking Magazine called "Get the Most From Your Router". thewoodwhisperer.com/files/get...
And if you are interested in that big fat pattern bit, you can get those in William Ng's Store: wnwoodworkingschool.com/shop/i...
The Wood Whisperer is education and entertainment for the modern woodworker! Find more at thewoodwhisperer.com & don't forget to subscribe to our RU-vid channel! ru-vid.com_c...
Connect with us!
Follow us on Twitter / woodwhisperer
Like us on Facebook / thewoodwhisperer
Pin us on Pinterest / woodwhisperer
Learn more about our premium project videos at thewoodwhispererguild.com

Хобби

Опубликовано:

23 апр 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 74

@jhotwax 9 лет назад

Pleasant speaking voice, clear wording, no vocalized pauses, good video editing. Nicely done. Very watchable.

@branshin4663 6 лет назад

The small and exquisite small drill bit has exerted great performance under your project and produced great engineering projects. Learn from you!

@mcorrade 6 лет назад

this is great tip thanks. I'm new to routing and can see that the router has a wide range of uses.

@hlaadiablovalleychapter6002 8 лет назад

Thank you for the real captions! I couldn't have understood the video without them.

@branshin4663 6 лет назад

hello, dear Ann, do you still use the router bits for woodworking?

@diminett6462 3 года назад

Was watching your videos a decade ago. Retired and have a huge workshop with a hammer c331 table saw and festool. Have no talent what so ever but loved watching your tips and tricks. Looking forward to reading learning my tools and starting some new projects. My domino has me stumped it’s over 10 years old but never used. It is difficult to line up the joints have you done a video with domino not lining up making window boxes and they are all screwed. I bought the festool marker which attached to the domino but looks useless to me. Anyway we are in lockdown here in Victoria Australia so spending all day in my workshop. Just opened my 1400 router and needed to learn how to use it. You have got me all fired up lol. Stay safe. Love your work

@williamcooper5009 2 года назад

I am guessing you have the DF500. That stoopid plastic lens shifts. 1/16" off means you are 1/8' off. It is the Achilles heal of the DF500. You can slide it in proper place by loosening it, flipping it over the tool , aligning center mark/line with factory line on base on Domino and you should be good to go. But, I have been frustrated with the fence and the fact that it can drift. There are 2 after market solutions. One is by Seneca and I forget the name of the other one (MC?, two letters) - it is from Britain, I believe. With either of these gadgets installed, the DF is then used upside down and has MUCH better stability and accuracy. The Domino is one of the best woodworking tools ever. You'll love it once you know the ins and outs, no pun intended. Woodpeckers makes one but it is in production once every 18 months. There are plenty of videos on everything I mentioned. Good luck. And "no talent?" You just need two things: Desire and practice; with that comes talent.

@billybike57 Месяц назад

Great information, really like your T-Shirt!

@texasfossilguy 6 лет назад

the t shirt (haha clearly you are good people), how professional you are, and the video quality made me subscribe! lol

@markhall3323 5 лет назад

Thanks I was struggling to use a router to remove a lot of material from a big recessed area in a bench but now I will use the router for the edges and finishing the bottom only, and try to remove the bulk of material with a drill and forstner bit

@mostaza1464 4 года назад

Great explanations! Thank you & subscribed!

@pauldeveraux7897 7 лет назад

great teacher, also love your tee shirts👍

@jonq8714 7 лет назад

Yeah, friends don't let friends drink coffee from corporate chains. -This message was brought to you by Dunkin Donuts.

@roberthutcheson2485 5 лет назад

Love your t-shirt!

@robinmarwick1982 4 года назад

Good video ...very helpful thanks.

@amaurynegron4280 2 года назад

Amigo. Muchas Gracias --- happy thanksguiving Week with those attach to you !! Sunday Nov-21/2021 9:50M South Bronx N.Y.

@hendarbudi385 5 лет назад

Good video. Thank you

@MyLifecraft 2 года назад

Just spent $15,000 dollars and got 2 bits and a small block of wood! Now I can make a cool looking piece of wood :)

@siestagato 2 года назад

I love the intro.

@richardobermark4882 10 лет назад

Was hoping to find out where you can you buy that large helical flush trim bit you showed on this video? Thanks,Rich

@david1benson2jonas Год назад

great video, thanks!

@harvestimeyouth9445 5 лет назад

I have a dewalt router with variable speed. I am wondering what speed would you recommend when using a flush trim bit with a hard wood like oak? (Thickness is 11/16 for reference)

@txholeyrocks 10 лет назад

I do acrylic work and use flush trim bits often. About once of twice every couple years I use a the bottom bearing router bit. Top bearing flush trim bits also come in 3 flute. Surprised that was not mentioned. The more flutes you have the cleaner cut your project will have.

@chrisloran1118 4 года назад

Nice Router!

@npreschel 6 лет назад

Great T Shirt

@billdiehl156 7 лет назад

Thanks, Mark.......now I need to find a new pair of socks!

@LarsSveen 8 лет назад

Are those brass hammers with super fat handles in the background?

@Martin1519 2 года назад

Wow, that big daddy bit is beautiful. I want one

@joemcmakin4897 6 лет назад

It looks like the collet is larger diameter than the bearing so how do you plunge without having the collet hit the surface?

@mellymel1100 9 месяцев назад

WOW! You look so different. I started watching, and thought your voice sounded familiar, and had to look a second time! :P (no dis intended)

@Accho29 4 года назад

Wondered how you would use a flushtrim bit that is smaller than the thickness of the wood. Would you flip it over and hit it from both sides?

@user-cg9oi5ug4d 8 лет назад

sick vid thanks , what was the big ads drill bit called ?

@sebase6577 3 года назад

Like that t-shirt 😉 and the work lol

@deann2609 3 года назад

Hi - Re: Big Daddy - am looking for best (largest?) trim/pattern bit to try to avoid tear-out on endgrain w/o buying a wood shaper - would you recommend the BD or maybe a larger diameter router bit plus bearing?

@raphun76 7 лет назад

What kind of double stick tape do you use. I have had to nail my template to my workpiece to make it stay since I can't make the template not move any other way.

@duczman76 4 года назад

🤔 another way is to put painter-tape on the template and the workpiece and glue the template with superglue to the workpiece.that should prevent the slipping without using any kind of nails

@VegasJPH 4 года назад

How long to they make those bits? Longest I can find is like 2". That blue one looked longer than that

@alexandersangster7137 2 года назад

Where’s the drill press fence from? That’s a nice drill marc

@richardobermark4882 10 лет назад

Where can you buy that large helical flush trim bit you showed on this video? Thanks,Rich

@branshin4663 6 лет назад

hello, dear, did you got the router bits yet?

@Zack-xz1ph 5 лет назад

I'm not sure about the bit in this video here, but you might like 'Whiteside's Ultimate Flush Trim Bit'

@thedamnyankee1 2 года назад

Subscribed just for the shirt.

@kenjohnson4645 3 года назад

Would you be kind enough to advise me of the name of the manufacturer or technical name for the flush trim router bit with the spiral/angle cutting blades. I'll be darned if I can find them listed.

@stephenkosloff6081 4 года назад

hi - im looking for a trim bit that cuts a flange or lip on bottom - so the bearing is at the top, im trimming plastic formed items - an alphabet letter that needs a flange on it when cut out to it can be glued on a flat surface and look like a 3d letter afterwards - looked everywhere - so imagine a non flush trim bit with a smaller diameter shaft than the top bearing - thanks

@jeffnlisa 4 года назад

Don't know if you still see this thread anymore, but can you give a link or tell the brand/model name of that thick plastic circle template? For years I've wished I had a circle template thick enough to use with a pattern bit, but the thickest ones I've ever seen are less than 2mm thick. Or anyone else who knows, please post? Thanks!

@Mr123bears 2 года назад

What kind of double sided tape do you use... Also great video

@kennyc388 6 лет назад

Why does my bearing make a groove in the wood? It's brand new. What am I doing wrong??? Router is the smaller hand held style.

@0thers1d3 4 года назад

What's the difference between a straight cut bit and a flush trim bit?

@quietstorm7826 5 лет назад

what's the uses of the different radius sizes

@steveng5503 4 года назад

These bits are also ideal from trimming your big toe nails. 10 mins a toe with the router and your good to go! 😆👍🇬🇧

@jeffgerards 3 года назад

I really want that T-shirt! Where did you get it?

@Golgafrinchamdent 7 лет назад

Any issue getting that fancy spiral bit sharpened?

@branshin4663 6 лет назад

dear, do you still use the router bits for woodworking?

@UglyFireMedic 10 лет назад

I love the t-shirts you wear.

@branshin4663 6 лет назад

LOL

@jeffoldham3466 4 года назад

I wish you had shown how you did the dove tail,,,

@ciri151 8 лет назад

Router is love router is life.

@branshin4663 6 лет назад

LOL, COOL declaration！

@andresmedina7670 5 лет назад

forget the bits, where can i get that shirt?

@andre1987eph 2 года назад

Provide affiliate links bro! Sweet demo by the way. 5:57 excellent dust extraction

@MrTherber2 8 лет назад

What kind of double stick tape?

@Bradyvilleboy 7 лет назад

MrTherber2 Rockler has it. I forget the name.

@ToolsToday 7 лет назад

3M Double Sided tape works well for us.

@satxification 6 лет назад

My son gave me one of those DD T-shirts - lol.

@glennryzebol4472 5 лет назад

very nice but the holes from the center of the forstner bits are still there!! Jus sayin!

@walterrider9600 8 лет назад

thank you

@branshin4663 6 лет назад

hello, dear, do you still use the router bits for woodworking?

@jasonroets9906 10 лет назад

Why are you using a festool router when you could be using a Triton 2400 watt router? Have you ever used one? Voted number one in woodworkers mag since 2007