12 Tools Under $20 Every Woodworker Needs

Подписаться 1,8 млн

Просмотров 1,7 млн

50% 1

These must have woodworking tools are all under $20! Pick up these cool tools to help you with your DIY & woodworking projects.
Links to tools below 🔽
🎥 What to Watch Next:
8 Tools Under $20 YOU Said to Buy - • 8 Tools Under $20 YOU ...
Cordless Drill Charging Station - • A Better DIY Drill Cha...
Mobile Wood Storage Cart - • This Easy Wood Rack Ch...
13 Shop Storage Tips - • 13 Easy Ways to Organi...
➤Plans from this video:
Modular Garage Cabinets bundle (Save 30%) - fixthisbuildthat.com/garageca...
Mobile Lumber Cart - fixthisbuildthat.com/mobilewo...
Drill Charging Station - fixthisbuildthat.com/drillsta...
➤Tools/Supplies Used (Amazon affiliate links):
9’ Tape Measure - amzn.to/3V5txeS
9’ Tape Measure 3pack - amzn.to/3FRoe8n
Pica Mechanical Pencil - amzn.to/3P3069h
Pica White Lead - amzn.to/3Vahnl7
Flexible Tool with magnet - amzn.to/32Y0D7C
Telescoping Magnet tool - amzn.to/3pLdEdF
Spring Nail Set - amzn.to/48LeXwa
Auto Center Punch - amzn.to/3mJ2vIj
Spray Paint Trigger Handle - amzn.to/31mlFMI
Snap Off Utility Knife - amzn.to/3ziQ3DW
Ice Picks - amzn.to/3FGMqKB
Jimmy DiResta Ice Pick - imakeny.com/products/diresta-...
Flush Trim Saw - amzn.to/3zkJ6lV
Vaughn Bear Saw - amzn.to/2JVrWBD
Tongue Depressors - amzn.to/3eGpiQr
Blunt Tip Syringes - amzn.to/3qJaGFy
ISOtunes Bluetooth Hearing Protection - bit.ly/2Ru4Es8 (10% off code: FTBT)
➤Join the Builders Club!!! bit.ly/2abkaSV
More content, early access, FREE plans, video credits
Thanks to Woodcraft for sponsoring this video!
➤Support the FTBT Channel:
Buy FTBT Woodworking Plans: bit.ly/2fL5NGp
Buy FTBT Merch: bit.ly/2YgiHnd
Links to My Tools & Gear: bit.ly/FTBT-tools
Subscribe: bit.ly/FTBT-youtube
➤Thank you to these partners for supporting my channel. Go check them out!
Kreg Tool: amzn.to/2FXZIGp
ISOtunes: bit.ly/2Ru4Es8 (10% off code: FTBT)
➤FOLLOW ME on Social Media:
Instagram - / fixthisbuildthat
Facebook - www. ibuildthat
Twitter - / fixthisbuildtht
Pinterest - / fixthisbuildtht
➤Referenced people/videos:
Music Licensed through Epidemic Sound - Get a FREE month: bit.ly/3qCwWiW

Хобби

Опубликовано:

1 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 910

@Fixthisbuildthat Год назад

NEW VIDEO based on your comments 8 Tools Under $20 YOU Said to Buy - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Xd0JjlRvc-U.html

@buzzbbird Год назад

link for the 1-2-3 blocks?

@douggauthier4768 Год назад

Mastercraft utility blade us cool asf, knife to scraper is awesome

@coreyz.2800 Год назад

Possibly the most obvious "must have under $20" is the speed square. Straight lines, angles, short measurements, it can do a lot. And not just for drawing the straight line but you can also butt the sideplate of your jigsaw or circular saw against it for perfectly square cuts. Depending on the size you can also get a contour duplicator for under $20 and this is an invaluable tool if you find yourself needing to make a complex cut to fit around something. A couple more great tools to have on hand that you can usually find really cheap (even dollar stores will have them) is sanding sponges and sponge brushes. Sanding sponges are great for contours as they mold into the shape pretty well while still keeping fairly even pressure throughout. And sponge brushes are useful for applying stain, clearcoat, and higher viscosity paints that tend to dribble off of bristle brushes. And as someone who has had wood chips, sawdust, and flakes of fiberglass fly into his eye while working on various projects over the years easily the most important tool you can get for under $20 is a good pair of safety goggles and/or a plastic face shield. Yea, these aren't as "cool" or "fun" as a lot of other tools out there but it's far better to look dorky than to have fragments scratching your eyeball from the inside.

@Geoff_W 2 года назад

I would add 1-2-3 blocks to this list. SUPER useful, and you can pick one up for ~$20.

@Fixthisbuildthat 2 года назад

Great addition!

@Alex-rf1md 2 года назад

I love 1-2-3 and metric 25-50-75 blocks, they can space, act as a small straight edge or square and a lot more

@buddythompson5284 2 года назад

I found that the claw device works really well for unclogging sink & tub drains.

@andrew_gardner 2 года назад

Just scary the things they'll pull out, hair collects some funky friends in a bathroom sink haha

@Fixthisbuildthat 2 года назад

I love those plastic pull strips with the teeth too

@williamellis8993 2 года назад

That claw device is marketed by Menards as a drain clog remover.

@TheLovelyMissBeans 2 года назад

You'd be surprised how many things from the craft room are helpful in the woodshop (and vice versa). When I upgraded some of my quilting rulers to some that don't slide on fabric as easily, I took the old ones to the shop. They are awesome! You can see through them to line up marks, they have graph dotted lines all the way across them, 3 to 5 inches wide and the longest ones I took out there are 24 and 36 inches long! I also have some tiny ones too. They also have several angles marked on them as well. Additionally, I find washi tape, repositionable double sided tape, and card stock handy in the woodshop.

@Elymyntal 2 года назад

I love your quilting ruler tip MissBeans, it's actually brilliant! Now I have even more reasons "caugh" excuses to go quilting ruler shopping :)

@TheLovelyMissBeans 2 года назад

@@Elymyntal glad to help! 🤭

@dboyd462 2 года назад

Why take a tape measure to the hardware store? I just grab one off the shelf real fast if I need to measure something🤷‍♂️😂

@Fixthisbuildthat 2 года назад

Oh yeah, I've done that a time or two or ten 😂

@JCWren 2 года назад

In the Lowe's I frequent, the lumber department is at one end of the store, and the hand tools (like tape measures) are at the far end. While exercise is a good thing, I'd rather not have to trot across the store just to grab a tape measure. So, yeah, I take one with me.

@comsigninc 2 года назад

Just don’t instinctively put it in your pocket..

@akbychoice 2 года назад

So you are the guy that leaves the tape measures all over the place.

@natemartinez4595 Год назад

Sometimes the tapes are on the other side of the store

@andrew_gardner 2 года назад

Used the extended claw in the Air Force all the time. We called them "mechanical fingers" and they're great for grabbing stuff from the deep dark corners of an F-16 cockpit... I'm reliably informed lol

@Fixthisbuildthat 2 года назад

hahaha, I can only imagine. Thank you for your service!

@jonnyjl345k7 2 года назад

That moment of shame and embarrassment when you have to ask someone on the ground to hand you the fingers, magnet, and a mirror…

@andrew_gardner 2 года назад

@@jonnyjl345k7 I always loved when you go after a bolt and pull out two nuts and some safety wire instead

@muhhamad786 2 года назад

@@andrew_gardner Will have to do the echo test to find it? 😂

@jaypeay1941 2 года назад

I too was in the USAF and used the claw tool. Worked on radar set on F-101 fighter. It had a shelf that some of our radar equipment sat on that was in the nose cone. Amazing how many tools I was able to find under there with the claw.

@Daynaleo1 2 года назад

One of my favorite less expensive tools is the Nicholson 4 in Hand rasp/file. It has always been in my tool set whether I need to clean up a notch in wood, smooth an edge of sheetrock, or sharpen a point.

@willneisler7247 2 года назад

Definitely in the "Get you weird looks" category: Trashy red lipstick. Seriously, you can use it as transfer paint for marking mounting holes to walls. Dab a bit on the keyhole mounts and press (kiss) it to the wall, pull away. And your marks (smooches) will show you exactly where to put those mounting screws.

@marvthecarpenter 2 года назад

This tip also works really well for marking doors when the latch and strike plate are misaligned. However I've been told not to get too cheap as they are waxy and won't actually transfer anything, and the pricy ones are made to not come off. You gotta find that happy place in the middle.

@Chhesterification 2 года назад

@@marvthecarpenter brand: Revlon color: cherries in the snow That's a classic red lipstick.

@lancelavallee8119 2 года назад

I use ketchup, mustard, or mayonnaise packets. Depending on colour I Ned to apply to.

@BillMacfarlane 2 года назад

The other end of that spring loaded nail set is actually a center punch, replacing the next tool on your list 😎

@Fixthisbuildthat 2 года назад

they make that version as well. Mine is double nail sets. Now I wish I had the other one, lol

@lancelavallee8119 2 года назад

Painters 5-way. I'm not a painter, but this tool is so versatile. I use it every day. It does so much. Once you start using one, you'll wonder how you functioned with out it before. I'm 40 years in construction. Have to say this is the tool I make sure is in my pouch.

@garyoa1 Год назад

Agreed. I do a lot of finish work so I never realized how much I needed this gadget. Sure beats a screwdriver for opening a can of poly. (that blew me away) Not to mention it's other uses. There's a reason it's called a 5 way. 😃

@matthewbryant4677 2 года назад

I keep plastic straws on hand to help clean squeeze out for glue/finish in tight corners

@robvegart 2 года назад

4 of these items can be had from dollar general, dollar tree, family dollar, or just about any dollar store... The pop sticks, the syringes, the snapoff blade knife, a screw driver. I agree with this vid, as i have used 18 of these items as mainstay tools and implements that can be had for under $20....

@joelesko3267 2 года назад

All great pics but I have to say Handy shims are simply amazing!!!! you get for different sizes and are extremely useful when doing cabinet drawers. I have them all over my shop and they are cheap and reuseable!. LOVE YOUR CHANNEL! Thanks so much for all the inspiration and education you continue to bring to this maker community!!!!

@bobbysquinch5085 2 года назад

I too got an ice pick from my grandpa when he passed.

@jaketheriprrr 2 года назад

Rare earth magnet stud finder. Best tool ever.

@billparrish4385 2 года назад

The tongue depressor idea got me to thinking, for years I've kept a box of wooden toothpicks around the shop (flat and round), as well as a bag of bamboo skewers (like round toothpicks, only bigger) and wooden coffee stirrers (like skinny popsicle sticks). These all have a variety of uses, with mixing, filling, even small-project doweling.

@stuartbennett1163 2 года назад

i like to use ice-cream sticks in the UK. after the kids have eaten the ice-cream i just was the wooden sticks and they are really usefull for stirring and absolutely free

@gamer2101 2 года назад

I use wooden coffee stirrers like crazy. They are so helpful

@MrMcTavishOBS 2 года назад

A transfer punch is nice to have. I just bought a set from harbor freight for $9. I always have trouble transferring the exact center of a hole on to wood/metal for caster or a name plate and those put the indent smack dab in the center.

@SonnyDelicious 2 года назад

I call the claw pick up tool "the total recall" tool

@MichaelCampbell01 2 года назад

+1 to the ice-pick. use it ALL the time.

@DeputatKaktus 2 года назад

Coffee stirrers are also highly useful. You can of course stir and mix with them, but you can also use them in model making for anything wooden like little crates, walls or roof shingles.

@codacreator6162 2 года назад

The advantage to coffee stirrers is you can always use them for coffee if nothing else. 😀

@johnnieblackburn3182 11 месяцев назад

Packs of popsicle sticks from the dollar store are great stirrers for smaller needs.

@thelastgriffinlord8045 2 года назад

I work at an assembly line building industrial trailers so I need heavy duty tools, but I work in both framing and finishing. Wearing a belt while doing finishing work is a pain, so this list of handy simple tools is great. All of this can fit in my pants side pockets

@Fixthisbuildthat 2 года назад

yes, I love the small gems

@DonryuRaiden 2 года назад

saw the picture, saw the green pencil, looked in my toolbox. Its one of my alltime favs!

@richpeggyfranks490 2 года назад

Hey, Brad. I enjoyed your practical selection of cheap tools. For mixing stuff in small containers, I use plastic knives. Anyone who uses plastic flatware for get-togethers, picnics, etc., buys a combo package of forks/spoons/knives. The forks and spoons get used, but the knives just sit there. So, I ask for the (inevitable) left-over knives and have never needed to spend any of my hard earned cash for them. They are just the right size and stiffness. Also, the back side is slightly less rounded and can scrape the corners of your container. Try it out.

@michaelgriffith3385 2 года назад

I use chopsticks I have left over from Chinese food. Great for mixing, stirring stain, etc.

@lancelavallee8119 2 года назад

The spoons and forks have used as well. The spoons are great for molding caulk and other applications, like Bondo for repairs. The fork tins cut off work great for filling stripped screw holes.

@BillLaBrie Год назад

If you’re near an ikea, their “baby flatware” sets are worth the minimal cost. I use the knife and spoon for almost everything from spreading epoxy to separating parts without scratching them. They’re sturdy and won’t shatter.

@countrymagic61 2 года назад

As far as using the claw to reach for things, I just used mine yesterday (1/2/2022) doing some wiring for my brother in his Toyota FJ. However, I did not use it to reach for things...I used as a fish t help run wires in and up under his dash. Came in really handy and made the project go along much easier. With the snap off blade/cutter, I get mine from Harbor Freight. Comes in a 3 pack of different sizes, or you can get each one individually. Good tips!

@FixitFred 2 года назад

Definitely add Dental scraper/picks. They are handy for everything and come in different shapes. If you ask you dental office they will usually give you ones that one side broke for free. I use them way more than ice picks. They are great for woodworking and mechanic work. You can even get them brand new at princess auto for about $3 each but they are not the quality of a dentists office ones

@TheLovelyMissBeans 2 года назад

I'll be darned. I would never have thought about that!

@Fixthisbuildthat 2 года назад

Clever, I like that

@chadchisum5671 2 года назад

A stud finder is a great tool to have

@jeffhatcher6585 2 года назад

Auto-hole punch is a great tool. Also really good for keeping in your car for emergencies. Used to be an aircraft engineer in the Navy, and these auto hole punches are ideal for metal work, but also for breaking through strengthened glass in an emergency without a hammer and in a tight place where you can’t swing one. Worked crash rescue and it is a really handy to get through a window in an emergency .

@sircurlyfries1326 Год назад

great... your telling everyone ez ways to break windows

@jvaldeuxo 2 года назад

For the tongue depressor: Get your household a nice set of metal chopsticks and save the wooden chopsticks from takeout. They make for the best fine mixing tools. They're tapered on one end and flat on the other.

@Fixthisbuildthat 2 года назад

Nice tip! I have some chopsticks form my travel in China that I always use. Just don't eat enough Chinese takeout :)

@cj5mrt 2 года назад

If you like the snap blade knife, check out the ones made by Olfa. I've had one for well over 20 years and it's still going strong.

@Fixthisbuildthat 2 года назад

yeah, I've heard Olfa is nice

@no_handle_required Год назад

That irwin saw is DA BOMB. It's absolutely worth every penny and twice that.

@719vol 2 года назад

Papermate Sharpwriter pencils. -Cheap -Disposable -“spring loaded” tip prevents premature breakage. Best I’ve found.

@Makerr8 2 года назад

One of my most used "tools" is a scrap piece of leather that I use as a strop. It cost less than $5 and I can use it on a flat surface to hone my chisels or curve it to work on my carving gouges.

@michaels3972 2 года назад

Great ideas, Brad! I pick up old hand mixer blades at yard sales, Goodwill and similar other second hand stores. They are great in a cordless drill for mixing small amounts of drywall compound is a mud tray, larger batches of two part epoxy in a coffee can or other two part compounds. The nice part is they are cheap, so if lost or ruined, they are easily replaceable from my box of spares.

@squarelevelplumb 2 года назад

I used them in my drill press for mixing paint.

@MrTPF1 Год назад

Oh -- so you're not supposed to use your wife's mixer and clean it up real good before she gets home? LOL!!

@mcouture8169 Год назад

@@MrTPF1 That video would appear on the "Break This Divorce That" RU-vid channel.

@AXWCDMD 2 года назад

I use a lot a Reveal Marking Gauge. It’s under $20 and save me time.

@meperson 2 года назад

One of my favorite cheap toolsis Milwaukee 6 ft. Keychain Tape. It has both metric and imperial and is super compact and less than five bucks. Another great tape is self lock evolution tape - all tapes should be like that!

@joannamartin1003 2 года назад

Straws! For getting glue out of tight spaces. Loved your ideas and already apply many of them. I’m adding that pencil to my wishlist. Thanks!

@craigesmith4835 2 года назад

Awesome tips along with these cheap tools thank you. And well done on trying to use the metric system 🙂

@loki112000 2 года назад

14-1 painters tool is the best tool I’ve ever owned. So versatile

@vulpinemac Год назад

That mechanical pencil is essentially a drafting pencil with a holster. I like it.

@nancywitcher2641 2 года назад

Thanks for this video. I already have most of these. Two items that are a must in my workshop are Magnetic Parts Holder Bowls (4 inch or 6 inch are very handy) and a Magnetic Tool Holder (18 inch(. Both are used to keep small tools, screws, drill bits, etc. handy when I am working on a project. I also keep the small syringes that I get from the vet for giving meds to my pets. Very handy.

@sgsax 2 года назад

I have an old "lead holder" drafting pencil that I like to use in the shop. I got it at least 30 years ago with a sharpener. In my college town, it's really easy to get refills for it. For folks in the Midwest, your local farm supply store is a great place to find inexpensive syringes with various guage needles. They're handy for squeezing in glue where you need it as well. Thanks for sharing!

@Fixthisbuildthat 2 года назад

sounds cool

@HickLif3 2 года назад

Drafting pencils are also a lot less bulky too. they're awesome

@TCruz-ds7sk 2 года назад

Best tool for under $20 I have ever found is my little Pencil Zingy! It attaches to a construction pencil with a retractable string so I never lose my pencil again! Might be the best tool I own!

@southridgeraider 2 года назад

I don't know if someone else has said it, but the Pica is also very good to mark through a hole, especially if you need to mount something to the wall. The small shaft makes it really easy (given that the hole is big enough).

@normferguson2769 Год назад

50 years ago we used that same pencil leads in mechanical pencils for drafting. Good to see someone has reinvented the concept for woodworkers!

@Shackman66 2 года назад

For mechanical pencils try the uni brand. They rotate the lead every time you lift up to draw another line and a retracting support tube to reduce lead breakage. I like the Kuru Toga and Shift Pipe. That Dewalt tape measure is stuck to the case or stand on every machine in my shop. While I wouldn't rely on it for precision marking it is great quickly double checking rough setup.

@TheHeadincharge 2 года назад

Also a nice, thick 1.3 mm mechanical pencil is quite useful for basic marking as well. Almost impossible to break unless extended super far. The kikuyu enpitsu mx is really nice for this and solid.

@shanechepren8119 2 года назад

I would add a 1-2-3 Block and I am surprised you didn’t mention this, a small notebook. I use this for writing ANY measurements down when I am walking back and forth in the shop or running to Lowes for things.

@Fixthisbuildthat 2 года назад

I've gotta grab one of those 1-2-3 blocks, don't have one

@Not_TVs_Frank 2 года назад

@@Fixthisbuildthat Wen sells an inexpensive 1-2-3 set. They are meant for metalwork, so that means that even the jankiest ones are precise enough for woodworking.

@compunurse 2 года назад

That screwdriver from your grandfathers is, if I’m not mistaken called a perfect handle screwdriver. I saw somebody do a restoration on one once on RU-vid. You’re right. There are a tank. Heavy duty metal blades full length tangs and the handle shape is tremendous. Allows a good grip and gives good leverage. They’re quite collectible as I recall. Of course I know you’re not going to sell your grandfathers. I’ve got a bunch of my grandfathers tools in my basement. I hardly ever use them, but I love seeing them and knowing that they’re there. Reconnect me to him a little bit as we spent some time in the shop at his house.

@icekohl 2 года назад

Hand Tool Rescue makes giant new ones.

@chucknorris2952 5 месяцев назад

Have an old one (think 30s). The word "phoenix" is stamped on it, in tiny letters. Found it while i was digging outside my house. It sits very good in the hand, as you said👍

@stephenstrohacker7863 Год назад

I have these Pica pencils and absolutely love them. Liked them so much I bought a second pair of them as a gift to a woodworker friend and backup for myself. He loved it as well. Thanks Brad.

@jaypeay1941 2 года назад

Brad, great ideas. I bought a simple tire tread depth guage a few years ago. I use it to measure hole depths when drilling and it comes in handy for several other purposes. Probably can pick one up at the auto parts store for $5 or less. Jaypeay

@BobboMax1 2 года назад

I favor an old-fashioned folding rule for a depth gauge- the fancy ones have a little sliding ruler built in. Also handy for getting accurate inside measurements. And it fits conveniently in the lower left hand pocket of Carhartts.

@Fixthisbuildthat 2 года назад

What a clever idea!

@Sadowsky46 2 года назад

Why not use calipers for depth measurements?

@tof3275 Год назад

Use a quarter, and stick it in the tire groove which should cover the raised edge, IF you can see the raised edge then it's time to renew that tire, cheaper than a $5 gauge and you get to keep the quarter.

@SawdustmakerLori 2 года назад

Great ideas for things we can't live without!!! I've got many of these already and just got the Pica Pencil and white leads for Christmas. I've put several of your ideas on my wish list and will be purchasing them. Thanks for the tips!

@Fixthisbuildthat 2 года назад

thanks, Lori!

@bobmeister51 2 года назад

Pica Pencils are great especially the different colors. However when you drop the pencil the black lead will break.

@SawdustmakerLori 2 года назад

@@bobmeister51 Thanks for the info! I'll have to be careful not to drop the pencil. I work a lot with walnut so I'm especially looking forward to using the white leads. Have been getting white art pencils but they don't stay sharp long at all.

@johnhiggins3943 2 года назад

I got a retractable exacto knife I find myself using a lot more then I expected

@garethbarnes2628 2 года назад

Spring loaded nailset will work as a center punch also.

@MCsCreations 2 года назад

Really excellent tips, Brad! Thanks a lot! 😃 What I like to keep around is one of those BIG syringes (I don't know, they must be more than 1 inch thick) with grease for the machines. It usually comes with a plastic tip that closes it very well. Anyway, stay safe there with your family! 🖖😊

@Fixthisbuildthat 2 года назад

great tip, Happy New Year!

@egbluesuede1220 2 года назад

Great tip on the syringes...I guess in this case literally. I'm doing some chip carving that I wanted to try filling in with colored epoxy and I think you just saved me from making a huge mess! And I'll double down on the vintage ice picks. I find these all the time at tool swaps in that nasty bucket of crap for $1. I love em.

@seanloughran6714 2 года назад

Well, this damn video cost me $180! Really good recommendations and links, thanks!

@josecintron2323 2 года назад

Your were half way thru and I hadda hit the subscribe button so I wouldn't forget. I watch plenty DIY and woodworking shows and I found you very knowledgeable and entertaining. I do pick up tips and techniques that I in turn use. I will be watching more of you.

@glennryzebol4472 2 года назад

The day is started woodworking was the day i started making my own stir sticks for mixing. Always a scrap around to be used for that purpose. :)

@Fixthisbuildthat 2 года назад

The day I bought stir sticks was the day I cleaned up my scraps, hahaha

@glennryzebol4472 2 года назад

@@Fixthisbuildthat lol. Nice.

@sapelesteve 2 года назад

Excellent video Brad! Happy New Year to you and your family! Be well and stay safe! Looking forward to what you have in store for us this year. 👍👍🔨🔨

@Fixthisbuildthat 2 года назад

Happy New Year, Steve!

@lucashunnisett3066 2 года назад

You can get jumbo paddle pop sticks for $2 aud at cheap shops and craft stores so that’s probably a cheaper option to consider

@christined.3728 2 года назад

Great tool ideas here. You're definitely one of my top 3 favorite channels. I like the info and your personality. Thanks!

@steveeure5975 2 года назад

Brad, I also use syringes for intricate glue applications. They are great if you inadvertently wind up with a small crack or opening where it's hard to apply glue. Thanks for all the tips.

@lafamillecarrington 2 года назад

Syringes are so useful - I have a range of sizes from 1ml to 50ml

@user1111AB Год назад

that pencil in the thumbnail is absolute trash breaks after one week never buy

@randallthomas5207 2 года назад

Stanley 33-115 10-ft tape measure. It fits in your watch pocket, so you actually have it with you most of the time. And, it has a diameter scale on the back, so you can check pipes, etc. One, comment on the syringes: the more viscous the fluid the smaller syringe you want, with a larger bore, smaller number size, needle. A syringe that is twice as big takes four times as much push on the plunger to develop the same internal pressure. Because when you double the size the area increase by the square of the 2, giving an area 4 times as large.

@randygebhart6560 Год назад

As a mechanic, the magnet and grabber have saved me so many times.

@lynn858 4 месяца назад

This is proving really useful for figuring out what a bunch of the "what IS this thing" and/or "how are you supposed to use this?" going through second hand shops and the shop that sells broken packages and returned items.

@GlennBrockett 2 года назад

I have the spring set and the back side is for center punching. Given how often I use the nail set part, I think the punch/set combo is better.

@kimberlydubois7245 2 года назад

Great video thanks! I’m always looking for the perfect gift for my father. He enjoys wood working and has all the tools he needs.However, these “gadgets” are unusual or used in unusual ways and so would make a great little gift basket. Maybe I’ll even couple the basket (probably small tool box) with a link to your video. I’m definitely gonna get my woodworkers gift box going. Thanks again for the gift inspiration! And thanks to your followers- Looking through the comments for more ideas to add.

@DavidHodgesKU11 2 года назад

Drillblock. I think its like $12 on amazon.

@Xtreme543 2 года назад

Just ordered the marker! Really clever device. Thanks!

@skeid21 2 года назад

A good utility knife is a must! My favorite is the Olfa XH-1 as it has a rachet lock for the blade. Absolutly won't slip open or closed.

@greekveteran2715 4 месяца назад

Olfa XH-1 can also use their 25mm saw blades, that are both flash saws, and general use saws, for different materials and not only wood! Great for plumbers, woodworkers even painters can use this from time to time. I love Olfa, they are tthe inventors of the snap of blades, so I guess they aere easily the best brand! Only problem is, which utility knife to get,because they make a ton of different styles, that all do one or 2 more jobs, that the other snap of utility knives don't!! PS They also make the blade saws, in 18mm but be careful, because these look very similar, to their serated blades, which is a completely different style of blade.

@5055hunter 2 года назад

For really small (Dixie cup or smaller) mixing, I use coffee stir sticks (wood, not plastic) even less waste than popsicle (senior tongue depressor) sticks.

@BoomKing69 2 года назад

I literally bought that deWalt 9’ tape measure a couple weeks ago for the same purpose. It’s awesome for measuring furniture in a store to determine if it’ll fit your space. Just measure the space before you go to the store, throw it in your pocket and off you go!

@chrisburton8251 2 года назад

Bought a few items as a result of this video, very helpful, thank you!

@marilynmoore6752 2 года назад

Brad great video, my husband uses flat and round toothpicks, flat to spread glue inside wooden wheels, the round as small dowels, also he uses yougart cups to put wipe on poly or water based paint like delta cream coat or folk art brand when this dries in the cups you can simply peel it out and reuse these again

@jimithompson7442 Год назад

I do carry a small tape when I'm out thrifting. I would suggest getting the disposable box knives from harbor freight. They're much cheaper and the quality and comfort of use seem to be on par. Also check out the 3 inch circular saws. They're about 20 for most brands and work great for small projects and tasks. I do a lot of trim work and it's super handy to make small adjustments without traipsing out to the big saw to adjust a bit of chair rail by a small fraction.

@thewoodworkingprofessor3651 2 года назад

Very helpful video! 👍I bought one of those pencils off your recommendation. Had no idea such a thing existed but have always been frustrated with spindly leads breaking. Works great!

@issaccollier1453 2 года назад

i believe that flexible claw is designed for pulling hair from drains but i could be wrong

@fretless05 2 года назад

There is a hardware version of the icepick called a scratching awl. They are similar in build and look, and can be bought relatively cheap ($5-6 on Amazon). Some other tools I use a lot and are pretty cheap are some calipers and a compass.

@mpmfr 2 года назад

You may also look for a pick tool (or as the cringy name, dental tools). Very helpful to have around the shop/home. 🤟😎👍

@Fixthisbuildthat 2 года назад

Great tip, thx

@scottsimpey2965 2 года назад

Some great stuff there Brad. Another awesome mechanical pencil that I would highly recommend you check out is the Pentel Graph Gear 1000 mechanical pencil, you can get in various led sizes. What’s I find is especially nice about them is that the little metal tip at the end that the led comes out from can be retracted by pushing the clip so should you drop the pencil you don’t have to worry about it being ruined from the tip being bent or broken off. I’ll definitely be picking up one of those mechanical pencils that you showed however as I like the idea of the much larger led and the option of different colored leds, I’m sure that they are great for on rough wood. Thanks for sharing.

@coreylahey7344 2 года назад

true, i use something similar to what you're talking about. I have a 5.6mm mechanical pencil, found 2 of them for $12 on amazon. very nice to mark with and it's basically impossible to snap the lead,

@carlcox7332 2 года назад

Those 2mm mechanical lead holders are also great when you need to transfer/ mark hole locations through existing holes. They're actually marketed for that specific purpose on Amazon.

@rappeezy 2 года назад

I just bought 75% of this list and it's so cheap there's no guilt. Thanks!

@lvinzant6614 Год назад

At Harbor Freight they have a handy tool, Acid Brush. You can get a bag of 36 of them for under $3.00. It’s a 1/2” horse hair brush that is great for spreading small amounts of glue, paint, etc. and affordable enough to toss when done.

@csimet 2 года назад

An icepick is very useful for starting screw holes exactly where you want them, as well as marking locations for them. I keep one handy at all times.

@theRhinsRanger 2 года назад

Theres a shop tool for this, an Awl

@oddoneout1835 Год назад

Under $20 though? I'm not looking this up.😗

@BeauChampion 2 года назад

Brad, check out the flush cut saw that JKM sells. It has a zero tooth set so that it doesn't scratch up the piece you are cutting against. I love mine!

@jarfirst 2 года назад

Love it when a Brad asks, "What's in the box?"

@boatbyrd Год назад

Simply great video! Thanks!

@BenNawrath 2 года назад

The spring loaded nail set is awesome. They make one that’s more like a flat punch specifically for door hinges also.

@ModernRemade 2 года назад

Great tip on the mini tape measures! Just this morning as I was trying to find mine and was thinking “why the heck don’t I just buy a few more??”

@Fixthisbuildthat 2 года назад

Oh yeah, I bought one then bought three more, lol

@zach9538 2 года назад

Bought a pica dry pencil and some refills with mixed colors, love this thing.

@monicastewart6077 2 года назад

Bought the pica pencil set as stocking stuffer for my daughter, in electrician apprenticeship program, and one for my son, who is a heavy equipment operator owns own business. They both read reviews and stated will definitely come in handy.

@mikethompson4336 2 года назад

Brad, small craft stick/popcycle sticks are great stirrers also. A bar of soap for screw lubrication. I have a magnetic wristband to put nail screws bits at a reach. Small LED flashlights for people like me with aging eyesight. You can do a new segment of viewer suggestions. love your shop and builds.

@RickRottman 2 года назад

I buy six-inch tounge depressers at the craft store. I think they're cheaper than medical-grade.

@Fixthisbuildthat 2 года назад

Good call

@billymachner7551 2 года назад

You can buy silicone covered ones that are reusable too.

@dylanpeters6887 2 года назад

A good tool is a 7in. Rafting square! can't go without it!

@scottmorris4914 2 года назад

Definitely look into the Pica pencil, advantage of having the white is great.

@terrmaso 2 года назад

Great video, always like to see alternate uses for tools. Favorite tape measure is the 16' Fastcap. Length covers everything I do and the built in pencil sharpener is a plus. The front face also has a writing surface in case you need to write measurements. My favorite pencils are the Pentel Graphgear. You can get them from a .3 - 1.0 lead size. The thinnest I use is a .5, which doesn't work as well on rougher wood. I am leaning heavily towards a marking knife as part of my collection. Love my center punch, I am now going to look for an ice pick. I have ideas for additional uses for it. I usually keep short thin cut-off pieces for my stir sticks. I have an old poster tube cap I store them in. Syringes for epoxy is an awesome method. I used that technique when making coasters that had a split down the enter that resembled a lightning bolt. Keeps the epoxy where you want it 👍 Thanks for the great content.

@Fixthisbuildthat 2 года назад

I recently picked up a FastCap fractional/metric combo tape and it's great

@pantherman4699 6 месяцев назад

@@FixthisbuildthatI have a FastCap PSSR25 25 Foot Lefty/Righty Measuring Tape - I love that I can measure on either side of it. I never use metric, so it works well for me. ;)

@joelb8653 Год назад

A magnetizer demagnetizer is an awesome tool under $10.

@mraymo1977 2 года назад

I use my telescoping magnet tool in my office a lot. They’re good for trying to thread cables up between the wall and desk.

@bigskybob Год назад

"Ooh na na" earned my like today. Great vid!!

@orazha Год назад

Thanks for the great ideas. I noticed that you could save your pencil sharpness if you learned a skill that used to be used by draftsmen, architects, designers, etc., though I suspect that now they use computers instead. If every time you draw a line with a pencil you spin the pencil between your fingers, you will get a more precise pencil line and maintain the sharp point longer. Once you learn the technique, you'll find yourself spinning the pencil naturally.

@timdouglass9831 Год назад

Great tip! When I learned mechanical drawing back in the dark ages we were taught to file a flat side on the pencil lead. That flat went against the straightedge so your line was exactly on the edge. We had little popsicle-stick-like things with fine sandpaper on them for a quick touch-up. I don't know if that was a common practice, but spinning the pencil sounds like a simpler solution.

@texputter7928 Год назад

@@timdouglass9831 I found my old drafting sandpaper stick (from 1970) when we cleaned out the barn last year, but I couldn't even remember what it was for. Thanks for reminding me!😃

@BobboMax1 2 года назад

I like the idea of using one of those spring nailsets for removing hinge pins. Not having to swing a hammer next to a door is well worth the price of admission.

@69injunjoe 2 года назад

Good luck with that. The Tool looks weak .

@BobboMax1 2 года назад

@@69injunjoe I've always been skeptical about those spring nailsets, but they seem to work and if they do, they look a lot easier than a hammer and standard nailset. If the spring ones can sink a 15 gauge nail, it seems reasonable they can loosen and drive a hinge pin. I'll let you know...

@69injunjoe 2 года назад

@@BobboMax1 I find the current pre-hung doors from the box stores are all twisted and never square anymore. Hinges are all under stress from poor workmanship.

@69injunjoe 2 года назад

Out of 12 doors had to return 3 for improper hinge depth from top to bottom. Poor workmanship.

@BobboMax1 2 года назад

@@69injunjoe Ahhh, but the good news is those 5/8 finger-joint jambs are so flexible that it's easy to warp them straight, plumb and square again if you have enough shims and time.