#135 

How much for a board like this ?

Thank you so~~~ much :) Stay safe too~

@@KAMiJUINs ONSRA BlackCarve bees 2 for me personalised in PARIS 🗼 🐝 🌊🏄🔋🇨🇵ecologist activist 👌

すごいですね。 どうやってそれを使うことができますか。はい、安全は趣味を楽しむために最も重要なことです。 楽しく乗って、いつも見てくれてありがとうございます。 :)

I used Lipo battery packs this time. It's different from the cell-type battery you know. If you watch my #134 video, you can check it out. Thank you for watching~

They will ship to your area~

네 감사합니다~ 언젠가 기회가 생길수 있도록 노력해보겠습니다 :)

Thank you so much for coming and watching, Brother~ I really really want that to happen and I'm dreaming. :) Stay safe~~~by the day!

네 시청감사합니다.~ 우선 모터케이블 길이를 좀더 여유있게 설치해서 당기는 현상이 없도록 해주었습니다. 그리고 불렛커넥터가 ESC 엔클로져 덥게 안쪽에 위치하도록 설치했으며 케이블타이로 커넥터가 빠지지 않도록 조치해두었습니다. 감사합니다 :)

If It speeds up due to the gear ratio change, the torque decreases, so I found and set the most appropriate point with the motor I used. That's why I used 15:66. And if make it speed up just a bit, It won't feel a decrease in the torque. I mean, about 60-65km/h??? Thank you for watching :)

Thank you for saying that and watching my videos~ :)

Thank you so much as always~ :)

Хаха, я не трюкмен. :) Спасибо за просмотр и надеюсь, что то, что вы хотите, станет реальностью.~

Привет, Ты откуда ?

@@kub1x1 кек, Воронежская обл.

@@OnlyZloy понял , привет с Тольятти 😄

If you configure the cell battery, it will be easier to charge using BMS. Also, the battery life cycle is longer than Lipo. However, in order to get enough battery discharge rate, many parallel connections will be needed with high-quality cells. (about 12s8p for off-road setup). The Lipo batteries are definitely convenient to build, but you have to take out the battery every time and use a balance charger when charging. And, although the total life cycle of the battery is shorter than the cell-type battery. And it is easy to select a relatively high discharge rate so that a higher discharge rate can be configured even with a small capacity configuration. The battery discharge rate is the most important part of building an E-board. So, I think if you have knowledge about Lipo battery management, Lipo battery selection can be not bad. And a battery fire can occur in both cases. Thank you for watching for a long time~

Thank you for saying and watching :)

Thank you for the info~

Thank you for saying and watching :) enjoy your ride with safe~

I'm not sure about the Matrix2, but It's more flexible than vertigo. If you enjoy regular pavement rides more often, I recommend this rather than vertigo.

そうですか :) Thank you for saying and watching ~

Check the description box of the video #134, #135

Why not lol~ Thank you for letting me know HaHa :)

Except for a few skate tools, most of them are necessary equipment for filming. When I make a video, I use three types of cameras and a gimbal. So I always have a lot of luggage. That's why :) Thank you for watching~

46km/h (28.5mph) speed About 35km (22mi) range

I'm good \@_@/ HaHa. Thank you for coming and watching as always, brother :)

trampaboards.com/trampair-trucks-c-2063.html check this out~

I didn't calculate it exactly, but it's about $2,500USD. Thank you for watching~

Thank you for coming and watching as always, brother :) Yeah, I really like this build, too.~ And when I film a video, I lose my fear to get a good scene. lol~ @_@''

Those were Lipo batteries. 6s 6.2ah x 4 = 12s 2p 12.4ah

@@KAMiJUINs i love your set up ❤️ i will copy all parts you installed do you have the link where you buy the motor pulley , wheel pulley, motor mount and the belt you installed thank❤️❤️❤️❤️❤️

정확하게 계산해보지않았지만 2500달러정도 될것 같아요

Thank you for saying that and watching :)

@KAMi JUINs for sure man! I'm gonna be building one of my own. I'm an old shredder that can still skate. Everything I've ever been on has a tail. I wish I could set something up like the torqueboard street except with a medium length downhill deck with a tail for a foot pocket and agility. Not sure how I'd achieve that with the length of battery packs and still get 30 miles of range. I plan to rip and commute on whatever I build.

Of course, rubber tires have a better grip. To experience the full grip of Gummies tires, you need a road in good condition.

HaHa :) Thank you for coming brother~ Yeah, I can highly recommend this to you. Stay safe~

So do I :) Thank you for watching~~

Sorry for that lol~and well done :) Thank you for watching ~

Thanks :)

trampaboards.com

그러셨군요~ 그렇게 봐주셔서 감사합니다 :)

Thank you for saying that and watching ~ :)

I think the cost is about 2,500 USD for the parts only. And I think you should ask about the prebuilt to Trampa board. Thank you for watching :)

Of course, it's possible and You can pay in USD too :) Thanks!!!

Thank you so much for coming and watching, brother :)

@@KAMiJUINs always man! I love your vids dude! 👊🏽🤙🏽

Both the front and rear trucks are of the same type. Check it out. trampaboards.com/trampa-ir-double-kingpinned-skate-style-trucks-fit-every-191mm-motor-mount-trampa-offers--red-p-31810.html And you can also check the links of other parts in the description box.

@@KAMiJUINs Awesome, thanks, I just ordered them. Myself, I prefer hub motors due to silence and Regen properties, but I can't find 8" hub motors with pneumatic tires, so I attach pneumatic tires onto hoverboard hub motors, which is extremely tedious and difficult to get perfectly balanced. But they are very powerful using 64v or higher voltage and have incredible distance. Scooters have pneumatic tires, but not skateboard single side axles. Do you know where I could get 8" pneumatic skateboard hub motors? I make my own boards like you do, I also have Baja boards with solid tires, but their fancy suspension just doesn't ride like a skateboard does, and the belt drive motors are too noisy for me, when I know silent hub motors offer the same torque and power. Thanks for replying.

Thank you for coming friend :) Yeah, That makes two of us and it looks cool too.~

Wow~ Thank you for saying :) HaHa~

Thanks brother~ :)

가격이 가격이라서 가능할지 모르겠어요~ 시청감사합니다 :)

It's because of the snow :( When my eyes stayed on the camera while filming, I slipped at the beginning of the part wheresnow was covered.

ok snow and ice is the worst ground you can ride! ^^ i wouldnt try it,and here is no snow in winter! but i go snowboarding in Austria one week every year! ^^ were you come from?

South KOREA~

is it legal to ride this board in South Korea?

Thank you so much, brother :)

오랜시간 제 채널시청해 주셔서 감사합니다 ~ :)

네~ 꼭 그럴수 있기를 바래요 :) 시청감사해요~

No problem friend :) Thank you for watching too~

Thank you so much for many things :) I think you know what that mean, Brother~!

시청감사합니다~ 비디오에서는 좀 찐하게 보여서 레드빨이 많이돌긴하는데 실제 칼라는 핑크에요~

Thank you so much :)

Thank you for watching :)

55 kmh/ 34MPH but he's using 66T pulleys I think. Kami seems to favour ride quality over top speed, but with the motors he has he can easily get into the 45mph range with different pulley setup. it is an insanely quick board.. dangerously fast even, but its just not set up for true top speed in this video.

You got it all right~ Thanks :)