In minute 2:35 of the video. In my case I do not have the option called TOOLS. I just have the options HARDWARE, LADDER DIAGRAM and FILTER. What can I do to make it show up??? Thank in advance!
Since the Modbus address was set to 1 in Outseal Studio settings menu, it must be the same as the PLC number in the HMI Modbus app. The Modbus address or slave address or client address is the number used to identify any PLC in the Modbus network by the master or server device. It can be any number from 1 to 255. This means you can theoretically have up to 255 PLCs on a Modbus network.
Hi sir hw r u, sir I have a small doubt how PLC program links with Bluetooth.i mean when ever we setting temperature and other parameters... how PLC will... to set temperature this much only.... Please give response ... don't think it as silly question.... thanks...
The PLC send and receive data with the Modbus serial protocol (please google it). The Modbus communication can be transmitted by wire or wirelessly. In this case is the Bluetooth. See the last three videos where the transmission is wired. The next video will be over WIFI.
Sir i follow ur video carefully and at last i created hmi buttons and indicators on my android hmi and run it .but it seems 1 error .and blutooth still connected light gose very slow blinking like video.but my B.1 still not working .and B.1 on the android hmi changing his graphics properly it become yellow when i on it .but plc not taking command .modbus address are ok for B.1 -128 and R.1 -0 slave address is 1.but my hmi not working
