15 Must Have Tools For VW and Audi Repairs

Подписаться 920 тыс.

Просмотров 448 тыс.

50% 1

Here are just some of the must have tools you need fixing and maintaining Volkswagens and Audi. These are not the only vw and Audi tools you will need, but this is a great start. It doesn't matter if you're a professional or a DIYer this is a great list of tools to add to your tool box. The list and links to the tools in this video are listed below. This is for the VW technician too!
Become A CrewMember ~ goo.gl/D7eROI
Patreon ~ www.patreon.com/user?u=4243029
Amazon affiliate link ~ amzn.to/2fr7yfE
~~~~~~Tools in this video~~~~~
VIM Triple Squares ~ amzn.to/2BAmy2o
Snap On Triple Squares ~ goo.gl/N2eEZV
Torx Sockets ~ amzn.to/2jBAK2Z
Torx bit set long ~ amzn.to/2jA85LD
Torx bit set short ~ amzn.to/2AsxpxL
Torx bit set micro ~ amzn.to/2Bzkjwj
Ratcheting Handle Set ~ goo.gl/XpNf3a
Hazet Allen ~ amzn.to/2BzXtVa
Snap-On Allen ~ goo.gl/DCYPtJ
Sunex Allen ~ amzn.to/2AibKYr
Inverted Torx ~ goo.gl/bHWqDa
Hose clamp pliers ~ goo.gl/1MEBGc
Wire strippers ~ amzn.to/2jBfsT1
Auto wire stripper ~ amzn.to/2BAb2UJ
Wire crimpers ~ amzn.to/2Ahgaih
Milwaukee heat gun ~ amzn.to/2jzcJJW
Clamping pliers ~ amzn.to/2jB6XqX
Heavyduty clamp tool ~ amzn.to/2AgyQPg
VW trim tool ~ goo.gl/SxtBJb
Trim tool set ~ amzn.to/2jCZ0l4
OEM wire tools ~ goo.gl/14CrTG
Ford wire tool ~ amzn.to/2AmAo8w
JUST MAKE YOUR OWN
Blue Point wrenches ~ goo.gl/juCc8e
Milwaukee wrenches ~ amzn.to/2AhFsga
32mm socket ~ amzn.to/2AjDf3J
36mm socket ~ amzn.to/2Avy2X8
Oil filter cup ~ amzn.to/2j5Kkf8
VCDS ~ www.ross-tech.com/vag-com/
Wheel Hanger ~ amzn.to/2i8gtSp
KermaTDI (thanks for the brew) ~ www.kermatdi.com
Humble Mechanic Podcasts
• The Humble Mechanic Po...
Project White Wookie ~ MK3 GTI Videos
• MK3 VR6 GTI Project Car
Failed VW parts videos
• How VW Parts Fail
Tool and Product Reviews
• Tool and Product Reviews
How To videos
• How To Fix Your Car
MK1 VR6 Swap Videos
• VR6 Engine Swap MK1 Ca...
Be sure to follow me at:
The Blog
humblemechanic.com
INSTAGRAM
/ humblemechanic
FACEBOOK
/ humblemechanic
TWITTER
/ humblemechanic
GOOD STUFF ON AMAZON
amzn.to/2fr7yfE (affiliate)

Авто/Мото

Опубликовано:

1 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 679

@HumbleMechanic 6 лет назад

Remember there was not way to include them all in this video. Post up what else you think you need for VW and Audi repair!

@joegutierrez5360 6 лет назад

I had a question about this 1998 Volkswagen golf gti that's been giving me trouble

@sethriggle1462 6 лет назад

Definitely needed some of these tools today, removing the strut on my mk5 gti

@armaggedon4christ 6 лет назад

HumbleMechanic hey I have a question. What do you think about the 2003 Audi RS6's?

@HumbleMechanic 6 лет назад

awesome cars but mad expensive to maintain

@armaggedon4christ 6 лет назад

Thank you for the reply. I plan on getting one, but they dont seem to sell near me often.

@quinnkirlew9892 6 лет назад

#1. Patience.

@HumbleMechanic 6 лет назад

TRUTH!

@GForceConnections 6 лет назад

#2. Money.

@user-cs8qb9mb4n 6 лет назад

...#2... fuck you. never OWN A VW. period!!!

@user-cs8qb9mb4n 6 лет назад

Bull Shat....#1: NEVER own a VW. truth.

@mikeemorales04 6 лет назад

lmao. triggered

@jhhibbs 4 года назад

I found your channel because of this video. I’ve been a Subaru technician for 8 years and I decided I needed a serious change because I was so burned out doing the same thing. I took a job at Audi Atlanta and this really helped me get started with new tools I needed. Your channel has really inspired me and helped revitalize my love for working on cars. Thanks so much for what you do. You’re fucking awesome!

@LynxStarAuto 2 года назад

Bro be honest... us VW/Audi guys cool as a fan. When have you seen a jaded, bitter, VAG tech? Most of those are at GM, and Nissan.

@13vex 10 месяцев назад

@@LynxStarAutoas a VAG fan (own two GTIs) working for GM… help

@Zimmie8548 6 лет назад

Also, a 30mm 12point for the wheel axle nuts :-)

@CatonsvilleCentralRwy 4 года назад

Over eight years of owning and wrenching on various VWs and Audis, I have learned, often the hard way, that each and every one of these tools is absolutely necessary. Bravo on this list, wish I'd seen it years ago. Gosh, by the time I sold my first VW, a MK4 wagon, that poor car was one big heap of stripped 12 point bolts, broken wire connectors, and scratched interior trim...but I learned :)

@nicknicu1787 6 лет назад

I’m an absolute sucker for shiny new toolbox tours with shiny new quality tools in them,but nothing beats nicely worn well used tools that stood up over time. There’s something special about them that makes me appreciate a quality tool even more! I absolutely loved them! 2 👍👍 from me!

@HumbleMechanic 6 лет назад

You know that is funny you say that. I have a mix of tools that have had the crap beat out of them for 10+ years. I also have plenty of tools that are basically new. I generally go with the older tools. We have a history. HA

@SuperReallyNice 4 года назад

Oh hell ya... but now I'm a maintenance tech in a food factory, all my tool MUST look new. Embarrassing to show off clean shinny tools.

@brandonspies 2 года назад

There's nothing like the pure anger at one's self when loosing one of those nicely worn broke in tools. Every time you pull out its shiny new replacement you kick yourself in the ass again, at least until the replacement is broke in. Provided the replacement tool is as good of quality or better than the original. Otherwise the anger just continues till you can finally find a proper replacement.

@wilt778 6 лет назад

Thank you for taking the time out of your day to make these videos. Super helpful.

@trancextend 6 лет назад

Yes, I have most of these tools. It makes a huge difference to have them. BMW will also have use Torx bits so it’s a must buy. Thanks for sharing this video.

@justinyoungstown 5 лет назад

Thank you for this video and tips. I just started as a European mechanic working In a shop. Been diy wrenching and backyard mechanic for a good 10 years and decided to turn my passion into a career. Will be picking up a lot of these tools. Those wheel holders are nice especially on higher end Benz the rims get heavy 😎.

@r.douglaskuch5838 6 лет назад

Well done!! Very informative. Back into VDubs after 15yrs with a Mk4 Tdi . Thanks!

@peanutbutterisfu 6 лет назад

Wouldn’t be caught dead working at a euro shop without the Matco sa40s 1/4 kit. Super shallow 40 piece kit torx,triple squares,hex, flat and philips. Matco is the only company that makes this kit and it’s only like 30 bucks more for this 40 piece kit compared to the like 8 piece 1/4 triple square set. Great for a lot of the timing covers on vw/Audi with limited space from the fire wall, although the small blue point 1/4 bit ratchets are a must as well. I have a few bits I cut in half to use in the little blue point ratchets for the 2.0 and 3.6 timing chain covers.

@sollykhan2385 Год назад

another AWESOME video, Charles, 😇 Thank you for taking the time out and producing great content, we really appreciate your effort, please do more video's, Kindest regards from the U.K 🙂

@creak92 6 лет назад

The DIY pin removal tool is an awesome idea, I have access to all the OEM tools at work but for home use a cheap substitute made out of old wiper blades sounds just right!

@JaredSVX 3 года назад

Awesome video! Just picked up a MK4 GLI and this is exactly what I was looking for!

@VortexianMSU 5 лет назад

VCDS, a set of Torx screwdrivers and a couple of plastic trim removers are my always-on-board tools I tend to need most often.

@HumbleMechanic 5 лет назад

I keep those things in the car.

@aygwm 6 лет назад

Surprisingly I’ve found myself using many bicycle tools for working on my VW. P-handle hex and Torx wrenches in particular are excellent for tight spaces where you can’t get a ratchet or drill in. Don’t get crappy cheap ones though since they round out bolt heads too easily. Also, a cheap solution for trim removal: plastic bicycle tire levers (I recommend yellow Pedro’s levers). They can usually be had for $2-4 and they last a lifetime. Metal ones are available too if you need the extra oomph.

@nukenbc 5 лет назад

Thanks for this info! As a new VW tech this tool list will be something for me to work on acquiring.

@HumbleMechanic 5 лет назад

Awesome

@mattallen7125 8 месяцев назад

As a new Dealership Audi Tech this was so helpful

@HumbleMechanic 8 месяцев назад

AWESOME!

@chrislambe400 3 месяца назад

The 17 Hex socket caught me out once. I think it was for filling oil on a gearbox. Used a wheel nut and a 17mm spanner instead. Those rear brakes with a fine toothed 13mm ratcheting spanner and a skinny 15mm spanner is God sent. But the most important tool is you and your ability to make your own tools or improvise. Necessity is the mother of invention.

@LynxStarAuto 6 лет назад

11mm bleeder wrench and 7mm bleeder wrench for drum brakes! Also once I got one of these, I now use it 100% of the time but: VW coil removal tool. Such a time saver!

@stormfur19 3 года назад

Wheel holders are such a must have for European cars! I used to struggle so much with lug bolts and eventually I became decent with them. Then one day someone saw me struggling with wheels from a G wagon and handed me a pair of wheel holders. The difference was night and day for me and I am so much more efficient using a wheel holder than going without. I ended up buying a set with sizes to fit most cars. Also I love that you included the hose clamp pliers because I have been looking for a good pair. My coworkers use either the cable type or regular pliers and I don't like the cable ones because it's often hard to get them situated on the clamp in tight spaces and once they're on the clamp there is a possibility of them slipping off which can be painful.

@markjohnson2079 Год назад

Great video - I've collected most of these tools over the years via Amazon christmas lists... Family always wants gift ideas and collecting specialty tools (not when you need them for a job already) is good solution.

@dyllman98 6 лет назад

Just did Headgasket, water pump, Tb, tensioner on my 1.8. I got a set of Alan's and tripple squares and they made the job go so smoothly!

@LMacNeill 6 лет назад

Having owned two 2012 Jetta TDIs for almost 3 years now, and having done 100% of the maintenance on both of them (including one that's needed a timing-belt change), I have slowly been collecting these specialized tools over the years. I wish I'd had this video 3 years ago. But, hey -- I'll bookmark it now, so that I have it to refer back to, because there are some of these tools I haven't needed yet. Thanks!

@peterlevendoski6783 6 лет назад

I love my Hazet 197-3 magnetic bowl. Great quality and not outrageously priced like other Hazet tools. Also love my 1/4 drive Craftsman flex spinner handle for hose clamps. The only downside is if you turn it too hard the shaft will spin in the 1/4 drive connector. I might have to find a more durable one.

@josuefHuerta 3 месяца назад

2024 and moving from Toyota to VW This and your roll cart tour videos are my guidelines cause i think I've only ever done brakes and oil on a jetta before. Very helpful!

@alexandermarothy5004 6 лет назад

Hazet Tools makes some really good tools for German cars as well. I love Hazet and had a set in mind when I wanted to do Mercedes Repairs. Also, about the oil filter cup, I've seen so many break and broken so many that I would recommend one that either has lifetime warranty or inexpensive. I just bought an RS4 and this video really helps me out. I already know I need square drives and the plastic trim tools. My suggestion for owning tools to work on the European DSM is to have extras or doubles of your tools. The reality is that when you work on one, someone else will most likely have worked on it before incorrectly so you may end up breaking a tool to remove the over-tightened oil filter cap. Thanks for the video Charles. I enjoyed it.

@jakethomas7839 5 лет назад

Awesome content, Year’s can be saved by taking this advice seriously!!!

@wesleyhurd3574 5 лет назад

You are right on the money about those hose clamp pliers. I got a decent set from Advance Auto Parts and they are very helpful. When I didn't have them I borrowed a cheap hose clamp tool with the long cable. They were very cumbersome to use. It was aggravating to grab small clamps like the hose going to the aux coolant pump for the 2.0t FSI. After doing a tire rotation I would say that the wheel hanger is a great investment too. Going to keep it in the spare tire compartment for emergencies. Changing a flat at the side of the road is a huge pain without something like this.

@theadventuresofjavier8698 6 лет назад

By the way ,congratulations on the big win. Loved the series.

@HumbleMechanic 6 лет назад

Thanks man. That was so much fun. I can't wait for season 2. ;)

@lionelvasquez1380 6 лет назад

In a future video, can you please demonstrate how to properly de-pin and then pin the electrical connectors using the tools? I would appreciate it. Thanks

@HumbleMechanic 6 лет назад

I think I have at some point. Let me look into it.

@transtubular 6 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lrs8-KtJGus.html

@lionelvasquez1380 6 лет назад

Jon Wayne thanks i really appreciate it.

@gregorythoman8281 5 лет назад

There are several on RU-vid. It just takes a little practice. I found that after 2 or 3 I was an expert.

@LynxStarAuto 2 года назад

@@gregorythoman8281 that's what he said.

@Theurgicnick 6 лет назад

Proper fuel injector seal kit to ensure those seals are installed correctly and then have a removal tool if any injectors are stuck in the head and you want to either replace or reseal. Also an array of different size extensions and wobble drives have saved me countless times due to lack of space. Keep the vids coming! Love the channel. Love the VR6 to. It’s been ages since I have seen one of these on UK roads.

@seanthomasrauchert1695 5 лет назад

Whos got 500$ for the gdi injector tool i managed to make my own worked fine with no prob

6 лет назад

Things were a lot simpler in the old days. I've had 3 VW Polo's from 1983, 1984 and 1991 and could almost turn those cars into single parts with just a 10mm and a 13mm wrench :-)

@mihailpetrovici5044 2 года назад

Hondas were like this until 2000'

@mania002 6 лет назад

Tools I've used a fair amount are the coil pack puller, the pins for holding tensioners and the pin to set a manual transmission in the "home" position. I have to maintain 3 VWs so for me these are essential, others' mileage may vary.

@simonrawle7885 6 лет назад

just got myself a set of the bluepoint Triple Square, Stubbys and there a awesome. i made my wife a wheel holder a few year back to make it easier if she had to chance a wheel at the road side very handy just to keep in your boot

@HumbleMechanic 6 лет назад

Nice. I really need to buy a set of super short triple squares

@4schitzangiggles 5 лет назад

For the oetiker clamps I have found the ratchet style clamp tool for PEX oetiker clamps works amazing. It uses compound leverage to take what can be a PITA and make it a much easier job. It has become one of the most commonly borrowed/stolen tool, well after the 10mm socket...

@epic27 4 года назад

Thanks, Charles, good list. I would include a VAG electrical connector removal tool for the hobbyist and DIYer. I've owned and maintained multiple VWs for around 10 years, and even though I remember how to properly remove the connectors without breaking them (mainly the coil packs); sometimes I just go a little extreme on them. This past week, I replaced a bad diverter valve on my 09 Tiguan. Since I couldn't see exactly what I was doing, I broke the tabs off the old, oil-soaked, brittle plastic connector forcing me to order the tools and replacement connector. After repinning a new connector, I plugged it back into the original DV forgetting to install the new valve. The tool made it an absolute breeze to remove the connector in the confined space! That $10 tool would have saved me days of headache waiting for parts!

@jbac5767 Год назад

What is this?

@stefanczechorskidds8435 6 лет назад

The wheel hanger is a great tip ; I've used them for years as on the ground or on a lift of any height you can easily throw out your back - and anyone who has done that or strained your back will tell you that you are essentially "out of commission" for several days (if not weeks)! My Audi S5 sports 20" ers (wheel and tire is 55lbs +) !! Always enjoy your vids HM.

@Sargonarhes 6 лет назад

I'm going have to have a list of this. You just gave me a shopping list for Parts-A-Rama this year.

@maxvolovich9407 2 года назад

I found your site because of a used car dealer customer i have that likes to but Japanese and Audi cars. Lol so between him and his dad lol my toolbox keeps growing and growing but you forgot the most important tool for the DIYER! A subscription to your channel. You help make it less troublesome to understand the differences lets say German to English translation lol the simplicity i guess is easier to say. Also helps with your experience to help with shortcuts to speed up getting the job done faster.

@timothycash4123 5 лет назад

Thanks for the video. I start at a VW dealership soon and now I can narrow down what I need if I dont have it already.

@mattbaird5467 Год назад

This video is exactly what people need. Well definitely for me

@TrackTimeAudio 6 лет назад

I'm in subaru land, not vw, but that "Handy Remover" is the best thing i've bought so far. So many takata airbags done in half the tools thanks to that thing.

@s.o.s.exploration2412 3 года назад

Thanks 4 the vid. Learned much the hard way but video helpful none the less...

@RobertLeBlancPhoto 6 лет назад

Thanks for this. I just added a few of these to my Amazon cart.

@HumbleMechanic 6 лет назад

Awesome. Thank you.

@Thaddeus.J.DeWyse 5 лет назад

I just got my first ever Volkswagen and it’s a 2002 Volkswagen Jetta GLI with the 2.8l 24v vr6. It only has 69,000 miles, but it’s got a list of problems. I’m super super happy that I have a vr6 though. I’ve been looking for one for a year and a half. I wanted a GTI, but what I wanted more than anything was the vr6 engine. And I found one close to me with 69,000 miles so I compromised on it being a Jetta. (Plus my mom has always wanted a Jetta :) I love your video’s man!! I really appreciate how knit picky you are on having things be done the proper way!! You have a really valuable channel!! And you’re honestly what rooted my love for the vr6. Thanks for all your videos!!!

@HumbleMechanic 5 лет назад

Thanks so much and congrats on the new car

@TheSleepingonit 6 лет назад

A second elbow would be handy to change the oil filter

@TheSleepingonit 6 лет назад

With my 6'6" frame, I had my head on the ground about 2 feet away and somehow snaked my arm through a crossmember to access the filter

@jhenson5168 Год назад

Agreed. I had to use 2 10” extensions and a filter cap for the ratchet.

@finnice 6 лет назад

One tool often over looked and something I use on every car I put on the ramp is my trusty big black tire bar... check all the bushes and ball joints every time, also good for finding rust holes!

@micul24 3 года назад

Nice! The very last tool presented its really appealing

@mr.heineken5770 5 лет назад

Great video, very detailed. Thanks.

@sjs5395 5 лет назад

Thanks man, great video. I have a mk4 Jetta, and I'll probably get the wheel holder tool first. 😃

@stco2426 День назад

Good list and selection. The XZN / triple square and Torx are really the must have tools here. Many of the others are a bit more general but hugely useful such as trim removal tools. I always assume that trim is made from unobtainium but the clips are much more sacreficial. Like the hose clip crimpers made from solid bars. This is a genius thing. Ta!!

@eagle5720 6 лет назад

I have a 2006 jetta, since I own that car I have never go to shop to do anything on it, I do it all by my self and my experience with that car motivate me towards being a Volkswagen specialist technition. People use to say Volkswagen is the most difficult cars to work on but they are not at all, they are easy. Last November I change my manual transmission in my back yard all by self, at that point I bought a few more pieces of tools to do the work, so due to fact that the diff in the transmission start to make noise so I bought a new transmission and put in. I also change my clutch to a conversion kit one that's work pretty well and even better the clutch, it run smooth, no noise nor vibration from this clutch at all. I see people say stuff like that online about the conversion clutch but they get the one i that name valeo it's work perfect. I also do my rear crankshaft seal too, it was a great experience doing all that work by my self.

@asmautollc 6 лет назад

Glad you like those VIM triple squares. Just got them off Amazon. All my VIM bits have been great.

@HumbleMechanic 6 лет назад

Yep. They are awesome for the price.

@jefferyfarrow2912 5 лет назад

I got my head bolt tool from VIM, for the price i couldnt beat it

@davidfarmer1736 5 лет назад

Hell yea! I've got most of the tools already, it's the cheep or hand made stuff that I think is the best. I modified a lock pick set my self but I also use dead feeler gages and grind the pattern out on them. I'm off to the salvage yard today to rummage through and find a wheel tool, I have an old stud out of a motorcycle engine that works but isn't cool enough for me.

@vduber03 4 года назад

Awesome video my guy!!!!! I stopped using the filter cup with the hole for 3/8 in it because some crazy techs/diyers put those filters on so tight (almost impact tight) that the socket part would crack, split or break off right away. Even with a socket on it. I felt the hole made it it's weak point.

@devonsimpson9648 5 лет назад

Another really good VW/Audi tool to have is a spark plug puller!! I just recently bought a 99 VW Beetle 5 speed and had to do a tune up and had to go buy one to remove the spark plugs

@PeterFeltersnatch852 4 года назад

Get one of them magnets from H. F that extend like an old antenna it's got a green handle

@johne6081 Год назад

Yes on VCDS and on low-profile torx -- I splurged on the Schwaben set.

@bob4535 6 лет назад

you mentioned a thin 15mm for the VW brakes, i use a small pair of Knipex cobra pliers they work great if you don't own a thin 15 like myself, never had one slip. Great videos man.

@martinschaffmeir7729 6 лет назад

Hey sir great post. I don't know how I got through life without socket bit sets now that I have them I'm looking for more as I use them more and more

@zam200864 5 лет назад

Very helpful info, thanks for sharing it

@Dougie085 5 лет назад

The last VW I had I used VagCom but I recently purchased a new VW and someone pointed me to CarPort Diagnostics and honestly I'm liking it a lot better.

@patkelly7999 6 лет назад

Very helpful video Charles, thankyou, but i still think one of your best tips is the spark plug hose blocker, so simple but very good, no mess :):)

@warrior13shadows 3 года назад

Bro thanks for everything your awesome !!

@DanielLopez-du9hl 6 лет назад

Some of those tools are going on my holiday shopping list for me :)

@HumbleMechanic 6 лет назад

NICE!

@gabriellance9248 3 года назад

For those that own a Passat, the "wheel holder" comes in the wheel tool kit.

@coache1nine 2 года назад

I have a B5 and mine didn't. May have to go to pick n pull and see if I can find one. Thanks for the tip

@jemmace2586 5 лет назад

Great videos!! thanks, I'm pretty much there with my tools to look after my tdi golf estate, my latest addition is my transmission drain/inspection bolt hex set, really handy to have with it containing every size!! Still need those clamp crimps tho. The heavy duty type. Thanks again.

@HumbleMechanic 5 лет назад

Glad to help!!!

@B3NNi420 2 года назад

1/4" wobbly Allen head, was great for the valve cover and egr on mk4 diesels

@spawntohell 4 года назад

18 mm all sorts offsets, straight hex bihex and triplesquares from tiny to jumbo size vag loves their offsets and triples quares (had to order a new set to cover jumbo sizes)

@VincentAuger 6 лет назад

Thanks for the great videos and tips! Wheel holder came with Touareg? Sure enough, ran down to my garage and it was right there the whole time. I purchased a set of those not even knowing that was hiding in the back of the treg. Still happy I have a set as using two does make it a little easier. Thanks for the tips, really is a great tool and keeps you form scratching the inner barrel by accident.

@HumbleMechanic 6 лет назад

LOL Glad you found it. :) I think 2 is a must while wrenching... Well I guess 4 is better

@seanthomasrauchert1695 5 лет назад

Also Stripped screw&bolt set comes in handy when previous owners strip the hell out of the torx bolts and a pic tool for electrical connections come in handy epecially when aged and brittle vcd is a givin too especially these days since everything is cpu related kinda hard to do a throttle body adaptation with out it surely saves$$ in the long run...

@virtisconsole12 Год назад

Hey Charles, great video and yeah you definitely hit everything I can think of for must haves for VAG maintenance. I'll share one that I think is a must have for B8 platforms for rear wheel bearings, if you have ever tried to remove those two lower M12 recessed triple square knuckle bolts that hold the bearing to the knuckle then you know what I'm talking about. That aluminum shaft that houses the control arm bolt to the wishbone is right in the way of this job. I found that that a very short M12 triple square bit with a 10mm hex end works great to get a 10mm box wrench on. But, I found that this tool from Snap-On is a must to get a ratchet on that bit, a Standard Torque Adapter (part # FRDHM10) 3/8 drive to 12pt 2" in length - I'm not partial to Snap-On, although I do have much from them as well as other tool truck tools - but I've not seen this torque adapter from any other manufacture. There is no way to get a ratchet on those two lower bolts without that adapter - it will save you a lot of time without having to remove any of the suspension components, so a stubby M12 triple square bit and that torque adapter I'd put in your tool box as well

@shauncatlett6066 5 лет назад

S•K and Lysle both make oil filter socket sets that have that 3/8" anvil hole for extensions. They are $45 and $90 respectively.

@scottjohnson7774 6 лет назад

Hey how about a overview on how to use vagcom I use it to pull codes on my wife's b5 Passat but haven't changed any setting due to fear of screwing something up

@donbrashsux 6 лет назад

Charlie.. your a legend..i raise my can for you..

@KasamS 5 лет назад

That wheel holder tool is awsome

@andrewwilson8317 5 лет назад

Thanks for great video. Maybe we different here in UK as I have had to purchase five sided " penta" sockets for some brakes.

@radu_mol2935 5 лет назад

i love working on vag group cars,good job

@Peter_Riis_DK 6 лет назад

Good tips, and you saved the best tool for last. Cheers. :)

@johnclintonmusicandmore 6 лет назад

you give away so much info it's crazy so how many old air cooled bugs do you have that was my first shop i worked at was only air cooled no water boxes

@carlosdinis8589 2 года назад

Thanks you for your tips!!!

@brandonburt4244 6 лет назад

Super useful thanks!!

@jrfitzii 2 года назад

for Allen I grabbed a 1/4 and 1/2 set and skipped 3/8. Served me well so far

@stuartwatson6849 Год назад

Hey Charles-Your videos have really helped me learn and work on my VW/Audi A3 TFSI and other cars. Thank you! I've done a total career change (at 66!) from advertising photographer to-get this-a VW dealership wrench-entry level of course but the experience I got from my DIY jobs, timing covers, tensioner update, brakes, radiator R&R, etc got me in the door! In this 15 Must Have tools video at about 4:00 minute mark you've got a socket holder with 2 rows of 13 magnets. I want one! I cant see a brand name or locate it online. Would you mind sharing who makes it and name? I picked up the HF roll away tool cart yesterday in your $1500 tool kit vid-and love it! Not too fancy for a newbie but totally what I need to start. Thanks!

@antonioremedios5779 3 года назад

A company called Rennsteig makes very similar connector depinning tools. about half the price of the Vag ones, and are still made in Germany. I only have the junior power terminal (JPT) one as of now but its very very nice and covers alot of the connectors on the b5 and b6 chassis.

@ClaudiuB 4 года назад

When I changed my stock intake to a RamAir Intake Kit, the Remote Access Hose Clamp was quite helpful, idk if I'd succed to do it by my own with a normal hose clamp tool (without that long wire)

@martinschaffmeir7729 6 лет назад

Hey sir nice post. I don't work on cars except my own but I can relate to what your saying. I not to long ago worked on a Husqvarna demo Saw and they built them with only torx screws

@martinschaffmeir7729 6 лет назад

I should have looked to see if I already left a comment lol

@cortdawson8613 6 лет назад

9:19 Go to your local bike shop and pick up a 15mm cone wrench - No grinding needed. Park Tool makes a nice one :)

@snuttis91 5 лет назад

The best for last, time to make a couple of them wheel bolts!

@bogdanisari4365 5 лет назад

Very interesting I have a France car and in my tool box I have most of them

@takeomack2782 5 лет назад

Thank you Charles for another fantastic video!!! One day...I’ll buy you a beer buddy! 👍

@HumbleMechanic 5 лет назад

I’ll take that deal. But first round is on me.

@takeomack2782 5 лет назад

HumbleMechanic The second, and third is on ME then buddy!!!

@aaronparker6899 4 года назад

What i have found works well for rear brake calipers is a 15mm bike pedal spanner as its thin enough to fit behind the caliper

@HumbleMechanic 4 года назад

That’s a great idea

@ryangroth7178 3 года назад

Those bit ratchets are great for the mk6 microswitch recalls

@dethklok21 6 лет назад

Man, thank you for making this one!

@jeffhamilton6957 4 года назад

And a vaccum gauge. But this was a quality video, and i thank you for making it. Oh you forgot the best tool ever! The pocket screwdriver.

@becomematrix 6 лет назад

Wheel holder 👍🏼bought mine today

@DJGreasemonkey 6 лет назад

For my mk2 golf. Extra wobbly 3/8 extensions. 7mm socket flex screwdriver. Electrician screwdriver and pick set and lots of wd40

@jackkcedar112 6 лет назад

Just refreshed a ‘95 Passat VR6. Triple Squares and that stupid spark plug wire remover were what I needed most.

@ryanfay1 5 лет назад

Just get mk4 plug wires the pullers are integrated.

@TheSleepingonit 6 лет назад

The last tool would be great for changing tires at 4 a.m. Especially if you break the rotor set bolts

@kevina4674 6 лет назад

That last tool is smart as hell.... especially if you don’t have the Phillips head holding the rotors! My car is missing all four so when I remove a tire it’s such a pain in the ass to sit down with the tire on your legs guiding it on and trying to get the first stud started!