17 Dangerous Table Saw Mistakes Woodworkers Do

Подписаться 23 тыс.

Просмотров 7 тыс.

50% 1

Want 13 Free Woodworking Plans With Step by Step Videos?
Click Here: sawinery.net/skool
Discover the top table saw mistakes that could jeopardize your safety and ruin your projects! In this must-watch video, we expose the most dangerous errors woodworkers commonly make and share expert tips to help you avoid them. Enhance your skills, boost your safety, and ensure flawless results every time you use your table saw. Perfect for both novice and seasoned woodworkers!
____________________________
0:01 Intro
01:35 Improper Push Stick Use
05:12 Freehand Cuts
07:25 Removing the Riving Knife
09:15 Standing on the Kickback Zone
10:10 Reaching Around the Blade
11:34 Using the Fence & Miter Gauge at the Same TIme
13:02 Not Using a Crosscut Sled for Long Boards
13:55 Setting the Blade Too High
15:37 Reaching Towards a Running Blade
16:30 Pushing Against the Part of the Wood Beyond the Blade
18:20 Cutting Wonky or Twisted Boards
20:55 Levering
22:23 No Outfeed for Longer Boards
24:03 Plunge Cutting
25:12 Ripping Narrow Strips against the Fence
27:01 Using a Dull Blade
29:28 Trusting the Gauges on Your Saw
____________________________
✍🏻 Try our Project Designer here: shop.sawinery.net/
👥 Join our woodworking community and get 3 FREE woodworking plans: www.sawinery.net/skool/
📝 Check out our blog for more woodworking tips and tricks: www.sawinery.net/
✉️ Email us at: contact@sawinery.net
📱Follow us on social media:
Facebook: / sawinerywoodworking
Tiktok: / sawinerywoodworking
Instagram: / sawinerywoodwork
Twitter: / sawinerywoodwrk
Pinterest: / sawinery

Хобби

Опубликовано:

14 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@mamba777jv 11 дней назад

This video should be watched by every woodworker. Thank you for making me more aware!!!!

@sawinery-woodworking 11 дней назад

Thank you for your kind words! ☺

@mamba777jv 11 дней назад

@@sawinery-woodworking You're very welcome. I have copied the URL and posted into our FB group of woodworkers. This is more valuable than any JIG on YT!

@fabiomerlin8820 20 дней назад

That was one of the most important( maybe the most important) woodworking videos I watched. Thank you.

@nedcramdon1306 14 дней назад

Were there any casualties when your shop exploded? Good video, good lessons. Thanks bud.

@SavageVoyageur 20 дней назад

Micro jig push blocks can be set up to stop most of the kick backs. Agree with you, Crosscut sleds are also great. The new Bow extender fence with the foam feather boards are what every table saw needs.

@bettyswallocks6411 12 дней назад

Personally, I find that standing to the side of the kick-back zone, because of the position of my hands, helps keep the piece pushed against the rip fence.

@user-yw8rb4jz5q 20 дней назад

Thanks for taking your time to make a great safety vid , as passing your knowledge on is muchly appreciated It’s amazing that you can just buy a tablesaw with no idea what your dealing with or how to use one , I learnt a lot just though this vid as a beginner wood worker which will give me a lot more confidence using it , so thanks again

@samuelmoncarey7183 20 дней назад

I made the mistake of using my fingers as a feather board on a piece of wood which became narrower towards the end and my middle finger briefly came into contact with the blade. I'm lucky I only got a very small skindeep cut on my fingertip.

@nel6211 20 дней назад

That's a lot of good info.

@dougdavidson175 20 дней назад

I use 1 shoe style and shipped push stick for my cuts. Shoe pushes, stick guides the off-cut. Wonky boards are run through the saw against my 4ft spirit level to straighten the first edge. As I use pallet wood this is usually long enough. I clean my blades as and when the pitch gets built up. An old rubbish bin lid is my wash tub for this. Haven't had the saw run long enough to send out the blades for sharpening YET, but soon. Thanks for post here. Take care & stay safe.

@belatoth1446 20 дней назад

Did your saw come with a guard?

@sawinery-woodworking 18 дней назад

Yes, my table saw has a blade guard; but like many woodworkers, I’ve found that I can’t use it for a lot of the cuts I need to make. So, I make sure that I use push sticks to protect my hands.

@a9ball1 20 дней назад

Great video. I've also been doing this for half a century. I tell people to use the guard that came with the saw unless you absolutely cannot do it with it on. Also if your riving knife rises above your blade because the guard attaches to it then buy a second one and cut or grind it so it sits lower than the top of the blade. You can get more money but you can never get more fingers. Also, something he didn't mention is the very first time you use a dado go slower than you normally do. The dado stack does not cut as fast as just a single blade and it might surprise you how it feels when you are pushing the board through. That's how I got my first injury in high school 50+ years ago. Make some push sticks. There's a lot of videos on it and it will give you practice working with the tools while you are making them. And one rule I tell people that is written in stone is never have your hand or any finger go above the throat plate. It's a very visible way to tell you that you are too close to the blade.

@tbone9664 20 дней назад

If you can't trust your gages, what's the point of putting them on there?

@sawinery-woodworking 18 дней назад

It all depends on the level of accuracy you need. They are fine for some things; but if you want to cut a mitered box, I wouldn’t trust the gauges for that.