I trying to get it to take but I don't see my Flex I/O in linx when I connect from the laptop to the unit. the switch has 011 on the front this was given to us from a different plant as a trainer but I not having much luck connecting. bootp is see it so can you please tell me where I'm going wrong. MAC:0000bc376f2d We also have a switch in the trainer, but I tried but ways Thanks Darren.
Hi: You don't say if it is a series A or B. I suspect it is a series A. Try watching my other video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VSc628BpRSE.html
Testing communication with the 1794-ASB module I'm troubleshooting these older version that use the blue wire with the EOL resistor, and they are daisy chained and goes to a scanner module 1747-SN, please advise
HI Leslie: Yes that combination will work! It has been awhile since I hooked up a system like that. You are correct on the daisy chain - never do a star or ring configuration with the blue hose. If you change the switches on the ASB modules, you have to power down the ASB and power back up. You also have to have the communication speed set the same in all of the modules and match that in the SN scanner module. You need a resistor at each end of the blue hose - both of the same value and sized according to the speed that you set the communication at. Hope that all helps. Bruce
Hello - No I do not. There is a link at the top of my page that shows www.plcs.net/ for training I would start there as there are multiple subjects and links for training. Thank you for asking.
From the Rockwell manual it states: Flashing Green No Connections Module has obtained an IP address, but has no established connections. It would seem that there is no PLC talking to the AENT Module. There is a 90 page manual from Rockwell - Publication 1794-UM006A-EN-P - July 2001 I would suggest you go to the Rockwell manuals site and download the PDF. Hope this helps you.
Mmm... i'm doing the process that you wroted on your vídeo (on behind text) but, i write the ip adress on "MAC", an then i make a "ping" to adress and not responde to me. Do have whatsapp o contact for talk to you?
