18” wheels on a Camaro SS 1LE Wheel install 

Damn I love this channel. I jump around from old to new vids. Specially since I’m getting a corvette in 3 months. Also saw a comment hinting a new C8. That would bring great content, get a nice 3LT trim man. 🤘🏻

Big camaro fan, hope to own one someday. I enjoy your videos and edits. Keep up the good work, I’ll be here as this channel grows 👍🏻

Just got a 2SS and can’t wait to do all this kind of stuff to it

Looks good but the stock 1le wheels looks better in my opinion

A comparison video between the SS 1LE, Mustang GT PP2 and the Challenger Scat Pack Widebody (6MT) would be a phenomenal video. I don't think anyone has put these mid level "track" packages against each other.

Just thought I would add some input.. I have a pair of 305/35/r18 for dragracing on the rear of my 18 SS non 1le with no issues. Love your car though I can't wait to do some of the mods you have

Get the track brake air deflector or run hoses. The air deflector that comes with the car comes off with 3 screws. Don’t touch the suspension for track. If anything replace the bushings but leave the doings and dampers alone.

Add spacers, get a tire with bigger sidewall to reduce gap and increase comfort and straight line acceleration like on the ZL1 1LE. 1LE has 19s though. Maybe L1E 19s would have been a better choice and would have fit better

Just ordered torin red rims and 245/55/R18 for Camaro coming off is low profile tires with 24s

Looks mismatched, not worth the weight saving... rubbing, wheel gap, speedo is off, looks like you got a set from a completely different car.

i would go with longer wheel studs and use 5 mm hub centric spacers all four corners for track only

I have eibach lowering springs which are perfect with magneride. Feels like normal and it's not too much drop

Brand new wheels peeling like that?

I just fully converted to 18in rims on both my axles today. I’m running 18x10.5 rims on my rears with 305/40r18 Mickey Thompson ET S/S and for a while I stayed with the stock fronts. Today I just installed the Laguna Weld Racing Rims sized 18x8 with a 245/45r18 Nitto NT555 and man did I feel a huge difference. The car feels like it turns a lot more smoothly now and it feels like it can finally catch up speed properly. I kinda wished I knew that I could have gone a little bit more taller on the side wall but I’m going to run with the fronts like that for now. I would want to lower my Camaro but I’m just worried about scraping my car on potholes and speedbumps and all that. Maybe someone could give me recommendations for lower my car.

Don't mess with the magnaride suspension. Should have done some square 19 inch wheels. Apex etc

Please add the wheel and tire sirva including offsets... Thanks great channel BTW!

Bad luck!! I knew it, they will not fit. Any way don’t be sad, add some spacers. 3 mm front 5-6 mm back or more if you can change the bolts. Good luck 🍀

What's the advantages of smaller rims? 🤔

Don’t F with the magnaride settings. The rebound and compression ratios are preset and tuned to maximize their potential. If you’re going to lower the ride height, bite the bullet and go with a quality coil over. Believe me, you will regret fucking with the engineered in presets with the magna ride shocks.

Your camaro looks great. I would put some spacers on and maybe change the wheel studs. Gears job

Like the final set for sure ✊See you track your car and mine I drive it but I keep it like a diamond 💎. I would have cleaned up the wheel wells and ceramic coated the wheels and calipers. You still can at home 🤔Well anyway they look great ✊

Idk anything about the tires , but my opinion is the 1LE stock rims look better

Why not Hoosier’s? What size tires and width rims did you install?

Looks real good the new ones👍

I like the rims but I feel like they're too small on the car

What wheels are these bro or where did you get them?

Hi quick question, on a 2017 Camaro SS1 LE when changing brake pads do the rotors have to be changed as well or can they just make the cut on the rotors????

Did you end up going with lowering springs or coilovers? I don't see a video on your channel saying anything about that

Not a fan of the 18”s. I would stick with the stock SS 1LE wheels. I would do a ZL1 1LE 19” if you really wanted to go lighter and wider.

Which light setup so you have on the back? I'm looking to upgrade my stock taillights on my 2016 and like the way yours look

Look good car for the environment and the other is a great way to get the best outcome paint.

Why did you drop rim size to 18 From 20"

1LE stock wheels are much better. The concave look and the graphite color makes it look much harder

The exhaust tips not sitting flush against your bumper doesnt bother you at all?

Have them repaired and powder coated. I would have it done right and be done with it. I had mine done and it’s worth it.✊💎

The final setup just manage to put it mann

Looks great 👍🏽 👌

Put a spacer rather than hacking on your car. I would not pit wheels that don't fit. Keep 20s

Love the color, I believe Blue is the best color on a Camaro just my opinion as my 2019 is Riverside blue metallic. Is that a after Market spoiler ? If so who did you order it from thank you.

Will you sale those ss 1le wheels?

Would the wheels on the zl1 1le be a better fit for your car?

Great video! Would you sell your 1le rims?

18inches wheels are looking good than the 20 inches or 19

I would never change the wheel size on this car especially to something smaller. No way.

Tjere os to much space between the tire and the fender ,you lost 2inch and your gearing has changed from smaller wheels. I would of installed wider tires on the 20 inch wheels.

Any speedmonitor issue?

Do you have any hot start issues with your ss?

idk to me the car looked much better with the original wheels on it

I know you’re not worry about looks when tracking the car but 19’s and 18’s looks well stupid on our cars. Great vid except for the music was loud. Good luck.

Car looks like a buff guy who skips leg day now.

So you wanna sell the old ones lol

Why 18”?

Good try, close, i haven't read all feedback yet...this is not a hater response....how old is this post? I like the 19`s vs going with 18`s, or just sticking with stock 1LE 20 inch rim set up or to go to option with ZL1 1LE 19`s set up ...wasn't too sure what you would achieve by your choice in this tire/wheel mod only....you probably needed an alignment that you did not address as well....

Get some 19’s

what is your tire size?

Where do u think I could get the 1LE wheels

Where's the WING?!

The phone ruined the moment.

Not a fan. Don't care for the poke on the front wheels and it seems to cause more hassle than it's worth. Now you need spacers, cutting deflectors and lower the car. Lets not talk about the flaking powder coat. Just seems like a bad fit. Take them off and hope to find someone that will want them. Go back to the 1LE's

The wheel looks damn goood

You should invest in a camera gimbal

Video gone sexual??😂😂😬

5:15 - 12 year old...?