18' Buick Encore Gets A New Rear Differential

Подписаться 917 тыс.

Просмотров 166 тыс.

50% 1

In a previous video • Plain Old Bad Luck... we had a look at this ladies 2018 Buick Encore that had fluid leaking out of the rear differential. We saw that the salt and corrosion ate away at the housing got it so think it finally cracked. Wilbert's dropped off the used rear diff from a 2020 Chevy Trax and we got a couple of new springs to put in also. Let's get after it! ‪@wilbertsupullit‬
-Enjoy!
Want to support us AND get early access to the SMA videos as they are uploaded? Consider joining the SMA "RU-vid Membership" by clicking here: / @southmainauto
You are also able to support us on Patreon if you feel inclined to do so by clicking here: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch! teespring.com/...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/...
The South Main Auto Amazon Store: www.amazon.com...
AES Wave Automotive Diagnostic Tools: www.aeswave.co...
Thank you so much for the support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Опубликовано:

21 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@billupstateny9151 4 месяца назад

Saw a meme on Instagram, fits Eric perfectly. " nothing you could say would insult me, I used to hold the flashlight for my Father"

@mdotguy 4 месяца назад

Hah! That's gold! 😂😂

@keithstroud2908 4 месяца назад

I have PTSD from helping my dad!! Best education I’ll ever get!!

@seamasrigh2162 4 месяца назад

I owe everything to my dad. Holding lights, running and fetching, on ladders & roofs at 5, in attics at 10, digging ditches cause no shovel handle ever fit his hands, and every scrap of mechanical, deductive, logical knowledge I posses. I didn't say "Thank you" enough. Gave me enough rope to hang myslef and reeled me back in.

@lvsqcsl 4 месяца назад

RIP Paul "Sonny" Obrochta. 1953-2019.

@brnmcc01 4 месяца назад

@@lvsqcsl Sad, that's not even what I would call "old". RIP

@JackdeDuCoeur 4 месяца назад

The shape of that casting was PERFECT for catching and accumulating salt. Nice work

@lilibethdoherty295 4 месяца назад

It was Designed and Built by GM Korea Formerly Known As Daewoo, they had to change their name because of all the crap they have built for over thirty years and their Korean Cadillacs have always been Cheap Throwaway Garbage.

@jblyon2 4 месяца назад

@@lilibethdoherty295 Don't worry, the Daewoo models designed and built in China are going to be so much better! If you have a sarcasm meter, it just exploded.

@Slicerwizard 4 месяца назад

@@dav1dsm1th It's a good combination of stiffening and weight savings, but I'd put the pools on the inside...

@paulmoir4452 4 месяца назад

They looked awesome on the model though. Perfectly vertical.

@ferrumignis 4 месяца назад

@@dav1dsm1thPutting stiffening ribs on the inside would not be a great idea, it would significantly increase the amount of oil required and increase windage losses and oil aeration. A far better idea is for the PRNY and other states to stop using the ecologically harmful and car destroying chloride salts.

@johnnyzander1466 4 месяца назад

''Everything tightened to factory spec.. Naturally...'' That's a good SMA t-shirt slogan 😁

@truthsmiles 4 месяца назад

Lol! I’d buy that t-shirt :) But seriously, I’d bet a dollar if I went around behind him with a torque wrench and checked, everything he “tongue torqued” was within 10% of where it should be - which is plenty close enough.

@roberthicks4034 4 месяца назад

I would buy that shirt!

@douglofreddo7886 4 месяца назад

I'd buy that.

@wojciechuczyk6566 4 месяца назад

Send me one to Poland. Of course, the author of the slogan should get a percentage of the sale ;)

@paulbinmo 4 месяца назад

Also on the coffee mugs of course… 😁😁☕️☕️

@DIYDaveOK 4 месяца назад

If Eric says he torqued an apple pie to spec, I believe it. 😊. Thanks as always, sir!

@ZVB1634 4 месяца назад

I really enjoy Eric’s humor 🤣 it’s like 90% of the reason I watch these videos

@RogerMudd-gh4ms 4 месяца назад

He's getting funnier!

@johnpereira822 4 месяца назад

Still cheaper to fix it then to buy a new car prices are still ridiculous

@wallingj68 4 месяца назад

True, but it's still a Buick even when it's repaired. 😀

@jordanl69 4 месяца назад

The issue is that diminishing returns happen very quickly in the rust belt

@michaelgleason4791 4 месяца назад

Please tell me when a new car was cheaper than a rear diff

@jordanl69 4 месяца назад

@@michaelgleason4791 it’s not. But when it’s the rear differential, then the shocks, the shock mounts, the frame, the motor mounts, rocker panels, it starts to add up. The fact that you’re putting lipstick on a pig is fine, but when the pig needs a perm, nails, and a new wardrobe you start to look in another direction

@brianwhitney9181 4 месяца назад

His previous video on this Buick with numerous problems and more to come before this owner gives it the boot.$$$$$$$

@50sKid 4 месяца назад

Finally someone says it. Driveshafts are balanced as a separate assembly, not while they're bolted to the diff. Eyeroll.

@GDawg4Me 4 месяца назад

Razor sharp zipties are a menace buddy! That was a true public service announcement. Love your productions Eric!

@sspnugen 4 месяца назад

I knew Wilberts would save the day

@stevenquigley4208 4 месяца назад

Yup. I thought of them in the last video..

@sargefreedom1578 4 месяца назад

I need a Wilberts

@rma7921 4 месяца назад

Great Scotty impression 😂😂 19:18

@brucehobbs1734 4 месяца назад

My wife loves your commentary, she’s also jealous of Mrs O. 🤣🤣 Keep doing what you’re doing!

@SouthMainAuto 4 месяца назад

Yeah Mrs. O. is a pretty lucky lady 😏

@TStheDeplorable 4 месяца назад

@@SouthMainAuto Now we know she doesn't read the comment section!

@keithhastings4092 4 месяца назад

lol

@2nickles647 4 месяца назад

Because Erick looks better than 😅😅😅😅😅 No matter, no wonder my wife loves George Strait ❣️🤩 I'm just an ole fart

@Eastahtata 4 месяца назад

Does anyone remember the lady that commented how she mutes the videos and "enjoys" watching Eric's hands work?

@kenwiggins2699 4 месяца назад

I come for the video but the audio commentary is golden.

@jtapetillo76 4 месяца назад

Favorite part of your channel is, if I can do it, you can do it ! Love that part

@SouthMainAuto 4 месяца назад

You can do it!

@DaveBigDawg 4 месяца назад

@@SouthMainAuto only if I had a lift 🎉🎉🎉

@lvsqcsl 4 месяца назад

@@SouthMainAuto Not like you can......

@KStewart-th4sk 4 месяца назад

@@DaveBigDawg Lots of back yard do-it yourself guys do stuff like this without a lift. Certainly makes it more difficult and a PIA. Don't ask how i know.

@charlesfinnegan7930 4 месяца назад

@@DaveBigDawg Yep. Sometimes the worst part of DIY car work is jacking the car up and supporting on jack stands. Imagine pulling this pig rear end on jack stands.

@stevegerhart929 4 месяца назад

People are lucky to have you in their area. Most shops would not even call around for a used diff.

@joeyabb1965 4 месяца назад

But you didn't mention the Gulf ball cap.. They MUST sponsor you then. LOL

@brucedale4465 4 месяца назад

Is there a still Gulf oil company? n😢one in the Midwest that I’ve seen for along time!

@bradkay 3 месяца назад

I like the cap. But it's kind of ratty.

@eric_seguin 4 месяца назад

Worked in a shop in the late 80s. $100 labor for a clutch job. Parts 10% over cost. Never list. I got 50% of my labor and a couple 16oz. Buds after the work was done. We never had a transmission jack. When the sideways engines came in I set them on some blocks and lifted the car off of them. I've had 3 surgeries on my left shoulder and it still lets me know how I mistreated it every day. lol Thanks for sharing the video with us.

@WA-zl6ju 4 месяца назад

I heard a a guy say, If a t shirt doesn’t have a pocket, it’s a rag.

@wolfman7393 4 месяца назад

The guy does deserve a raise for putting the gear oil in a soft bag…simple genius. Hey…you deserve a raise too for your honesty!

@LSDale 4 месяца назад

Should make a video of you brazing the rotted out parts of the housing back together. I'm sure the internet would love to comment on it.

@RichL8223 4 месяца назад

Yeah I wanna see that

@gmankent8439 4 месяца назад

Do it!!!!!!!!!

@Mr572u 4 месяца назад

I’ll help you out! You don’t braze aluminum!

@thatdave86 4 месяца назад

In the old days of no RU-vid scrutiny,that's what would be done to keep her rolling ,but now everything has to be YT perfect

@c.hibdon1628 4 месяца назад

JB weld??😂😂😂

@davidblack188 4 дня назад

When he was working above the exhaust, that looked like a G&P extended reach air ratchet. Love em.

@dougheywood4692 4 месяца назад

Glad to see you got the lady all fixed up, especially with a used diff instead of a ñew one.

@paultercier2552 4 месяца назад

The concept of repair when possible is always a good attitude, knowing when it is possible is a show of wisdom.

@tluperz400 4 месяца назад

I just glad you don’t care what the internet says and make a joke/laugh about it. That’s how us normal individuals know you’re a down to earth human being! Keep it up! I wear my Hanes t shirt, Hanes boxers, wrangler outdoor pans, snap on socks and red wing boots(606)! 😂

@crlaw75 4 месяца назад

As Peg Bundy said to Al, "Hanes...he's back!"

@tluperz400 4 месяца назад

@@crlaw75well I have a confession to make, as I was getting around this morning I guess I’m a Gildan guy vs a Hanes, that goes to show you I don’t even know what I wear. If it fits, it ships this guy to work!

@KStewart-th4sk 4 месяца назад

@@tluperz400 Did you say your wife dresses you? Not trying to be a smartass just asking. LOL Thanks for the confession. It shows you are a stand-up guy.

@johncooper4637 4 месяца назад

You can get zip ties with christmas trees attached. I work all day and don't get a dime. Mowing the yard, washing the dishes, fixing meals, etc., etc.,etc. (retired widower home owner)

@richardgagg8588 3 месяца назад

With your name you should own a Mini Cooper JCW 😃

@brucehobbs1734 4 месяца назад

Amsoil started putting the fluids in bags. They’re great.

@OtisFlint 4 месяца назад

Just buy a pressure pot and you can fill anything in seconds. I swear mine puts 5L of fluid in a trans in maybe 30 seconds.

@2nickles647 4 месяца назад

I save the bags and refill them with a gallon of 75-90 gear oil. 😊

@donniev8181 4 месяца назад

Great video! Are we gonna get to see the Ford brake/windshield washer fluid carnage? Hilarious look into the camera after reassuring the YT masters of the factory spec procedure lol. Free tip, Gold Toe socks are great!

@glennwolfe1663 4 месяца назад

Eric, I've been following you and Rainman Ray for some time now. And both videos posting has solidified my belief that finding a reputable owner/operator shop v corporate dealer is the only way to go for honest/dependable service. Plus at 75y and all the technology, I'd be totally lost. THANKS and keep up the GREAT videos👍👍👍👍👍😸🫠🐺

@andrewg6238 4 месяца назад

“Unsponsored Eric”. 😂 Priceless!!! Love you, brother!

@23Skadoosh 4 месяца назад

Shouldve seen the look on the Autozone guy's face when i asked him where they keep the panther pee

@stevie3275 4 месяца назад

another great SMA video.

@SouthMainAuto 4 месяца назад

Thanks for the visit

@michaelearl6991 4 месяца назад

I was jonesing for SMA sure was glad to see this pop up

@BigDaddy_MRI 4 месяца назад

Weirdo!?? Me? Dang right. Now mail me that shirt! 🤣🤣 Great video. Example of “get ‘er done”!! Thanks for bringing us along. Take care!

@Peter-pv8xx 4 месяца назад

What a beautiful kitty, I had an all gray girl named Lia, she was the sweetest thing, no matter who came over bam she was right on their lap, she loved people but the people she was with obviously didn't love her because they moved out suddenly s they usually do in section eight housing and left her and her two kittens, she would bring her babies across the street to be fed, it was a no brainer to give her a good home, I miss her so much.

@totypme 4 месяца назад

you forgot the sponsored gulf cap that has taken a beating. great job.

@stephanieluigon5192 4 месяца назад

I'm pretty sure Gulf has sponsored Eric since even before there was an interweb. That's why he didn't mention it. How else could he afford to buy a Jeep?

@Randy245850 4 месяца назад

Eric you use your noodle on this job. Most everyone else uses just battery tools you go for the power with air tools!

@wallingj68 4 месяца назад

Thanks for the follow up Mr. O! Encore Encore! Huzzah!

@SouthMainAuto 4 месяца назад

Any time!

@georgejetzon3833 12 дней назад

Eric I watch you cause you make me laugh!! And I try to learn from you! Thanks for all you dodo!!!

@dendkmac 4 месяца назад

Wilbur having that part changed the game cost wise, you don't want to go crazy on a crusher car long-term.

@SouthMainAuto 4 месяца назад

Considering it was $1,000 less than a new one, it was a really good bargain

@lvsqcsl 4 месяца назад

@@SouthMainAuto So, we can conclude the used one was $200.00.

@thebeetalls 4 месяца назад

Closer to $600 since the $1200 price was for an empty case and this was a complete unit.

@danlemke6407 4 месяца назад

Speakin of pocket Ts... Thanks for the vid, it should be the same unit as my wife's car and that didn't look too bad. I live in South Dakota and they spray the same crap on the roads here, but the rust issue isn't near as bad, maybe because we have a dryer climate. Know what I mean, Vern? Anywho, it's great to ride with ya. See ya in the next thrilling episode.

@SouthMainAuto 4 месяца назад

Thanks for watching!

@ecleveland1 4 месяца назад

That was about the easiest and quickest rear differential installation I’ve ever seen. Just a tiny little aluminum box and a few bolts!

@joshbreeze1865 4 месяца назад

One of your funniest endings. Thanks for taking us along.

@rjb6327 4 месяца назад

Wilbert's come through again. Always nice to see Mrs. O.

@arubanjames 3 месяца назад

I love you videos. It would be cool to hear the hours the job took, or a brief cost break down, to compare to work we have to do ourselves or pay a local shop. Your channel is pure gold!

@rbailey225 4 месяца назад

That handy set of adjustable prying apparatuses is on my to do list.

@hookin1 4 месяца назад

Well done, we all know you torque everything off camera. So I heard unsponsored Eric will be on Only F... 😂

@ppark2123 4 месяца назад

A great way to close out the day with a video from SMA!

@SushiPac 4 месяца назад

The good ol zip tie reach around!!!! Everyone loves some of that 😂😂😂😂

@jamesbruno5896 4 месяца назад

Thanks for the follow up video!

@donaldfrederick1557 4 месяца назад

Good to see the follow up

@jerryking2418 4 месяца назад

Praise be to Wilbert's! Like the T-shirt.

@CrazyPetez 4 месяца назад

Eric, watching you work is almost fun. Watching uou work is entertaining and educational. Thanks👍.

@45AMT 4 месяца назад

I just about spit my coffee out when Eric started telling the story on that Ford! 😂 Some of the stuff you see in the Automotive business...

@rawcado 4 месяца назад

JUST ROLLED IN... to South Main Auto 😅😆

@truracer20 4 месяца назад

It happens. In the 90's I worked for Monroe Muffler and Brake. I was sent to a different location to fill in. First job of the morning was brakes on a really nice Cadillac. Finished the pads and rotors and checked the fluid, a little bit low, went to the shelf and grabbed a can. Started pouring it in and got the unmistakable odor of mineral spirits. Nobody there had any clue why there was mineral spirits in a brake fluid can. Ended up sucking the master cylinder dry and then flushed the system.

@1970genes 4 месяца назад

I don't understand why Eric isn't at 1m+ subs yet. Such great content.

@ruley73 4 месяца назад

I chuckled a bit when you said you should have filled it while you had it down, then proceeded to tighten the bolts that hold it up. It lookes like filling it afterwards wasn't too difficult after all. The capacity of the rear diff is 0.48qt according to GM's service information. Those coil spring insulators need to be replaced quite often. I work at a dealership and they're the only ones that we stock. 🙂

@JamesAgans 4 месяца назад

I just refilled the rear on my F150 with those valvoline bags after changing my rear axle seals. You are right, the guy that came up with that idea has been under a few pumpkins. What a great idea!

@ronaldderooij1774 4 месяца назад

To put windscreen washer fluid into your braking system is a new one for me. Never heard that before. I think this falls into the category of my mother and sister calling my father to come to the next town late at night because of a light on the dashboard. Turns out she accidentally switched on main beams, the light on the dash was blue. Those people should not drive. They both had no idea.

@truracer20 4 месяца назад

@jtjones4727 4 месяца назад

When I was still a very young man, actually the first car I ever owned, was a nice '87 Olds Cutlass Ciera with the 3.8. Anyhow it had a slow transmission leak around the pan. Over time it got very nasty underneath the engine bay. My dad had filled an old jug with purple power de-greaser so I could clean up some of the mess. Anyhow, a couple weeks later, late at night, I checked the transmission fluid and it had gotten very low. So I start digging through the trunk to find some transmission fluid, and I see this black gallon jug that says it's Dexron ATF. I didn't have a flashlight either, so I'm using an old flip phone for light. But I fill the transmission up, start her back up and drive about 1000 feet down the road, I hear a bad grinding sound, and that's all she wrote. I had filled the transmission up with purple power degreaser, and needless to say, it finished it off.

@kenj.8897 4 месяца назад

I hope the lady has better luck from here on out .

@fisqual 4 месяца назад

She won't. It's already called for an encore at the repair shop. 🤣🤣

@nashsmith3005 4 месяца назад

I was worried he wasn't going to torque the bolts, but he said he will. I can rest easy😀👍

@glenharper3136 4 месяца назад

Thanks for the video Eric.

@chrisforker7487 4 месяца назад

The end was absolutely hilarious!

@andygirke846 4 месяца назад

Yes Sir. That's how it is done, Ladies and Gentleman!!

@Mikheno 4 месяца назад

One of the few jobs where I thought "I actually could have done that". Nice job man.

@curtw8827 4 месяца назад

Appears Wilberts is first class, pulled part was nice and shiny.

@JohnDoan-iu7sm 4 месяца назад

I can’t believe people give you guff about stuff like marking drive lines and what not. I’m not a mechanic by any means but I have been wrenching since my dad put a wrench in my hand. You’re one of the best I’ve seen. So tell them to kiss your grits.

@guyc66 4 месяца назад

Your comment about the brakes on that Ford at the end of the video reminded me of a similar experience I had back in ‘83 when I bought a ‘77 Fiat 124 Spyder from a used car lot in Maitland, FL. Right after signing the papers, the seller had his technician (term used loosely) go fill up the gas tank and top off the fluids. Less than 5 miles down the road the brakes froze up on me. I had to loosen a brake line to bleed off pressure to get it moving again. Turns out the moron put oil in the brake reservoir. Cost me $444 dollars which in hindsight was some of the best stupid tax for a 17 year old. I learned a lot from that experience!!

@ekop1778 4 месяца назад

NEVER TRUST A USED CAR SALESMAN OR WOMAN LIKE THE SUBIE I GOT IN 2018 AFTER JUNKING MY 97 DODGE SHE SAID TO ME I CAN PUT YOUR DODGE ON CRAIGSLIST AND SEE WHAT HAPPENS CAR HAD 170K WORN OUT ENGINE FUEL LINES AND RUST ALL OVER SHE WAS A DOUCE

@erickieffer8440 4 месяца назад

I’m just glad to hear that everything was torqued to factory spec.

@jamescaron6465 4 месяца назад

Those Astro nano impacts are great. I did the brakes on my wife's matrix and it made the job go way faster. And the price was right, too.

@mgherter 4 месяца назад

What size compressor do you have? Finally thinking of investing in air tools for DIY after some real struggles with a caliper bracket bolt.

@jamescaron6465 4 месяца назад

@@mgherterI have the dewalt DXCM251. It’s a portable 200 psi compressor.

@mgherter 4 месяца назад

@@jamescaron6465 appreciate it!

@jamescaron6465 4 месяца назад

@@mgherter You're welcome! It works well for me and can power everything I have, including my thundergun. You just need to do yearly oil changes on it, but it is a nothing burger, half a quart of oil out and half a quart of oil in.

@richardr2238 4 месяца назад

Hi Eric , I"m sorry about the comment about "YOUR BOY" it IS no big deal . I"m an old fart 70 years old and LOVE your channel so please keep em commin !❤

@georgegogis7958 4 месяца назад

That cat has got it made !!! I been watching you for a long time. I still think you are the best. I hope you stay in good health to continue working till you no longer want to turn wrenches. I sure have learned a lot watching you.

@Tmanscar 3 месяца назад

I’m thinking of moving to your neck of the woods just so I can have you work on my rig. Where I live there are just no garages with the knowledge and honesty that you have🤷🏻‍♂️

@turboturtle9083 4 месяца назад

Every tool is a hammer and in your area....Every car is a winter beater.

@MKdefends 2 месяца назад

The classic !! DONGER holding it on there..

@renereyes4999 4 месяца назад

Great Scott Kilmer impression! I nearly peed myself! 😂😂😂

@the_future_is_today 4 месяца назад

It always kicks up his videos a notch [gyrating hands ✋️] this is why you should own a toyota

@c0mputer 4 месяца назад

25:30 Brake line stretching like a cat that just woke up. Love it

@imafarmboy2 4 месяца назад

I believe the "unsponsored Eric" threat more than the "I went back and torqued everything" comment.

@Dunkinize 4 месяца назад

I am absolutely amazed at what NY does to cars. I've got a 34 year old Toyota 4Runner with no rust on it at all. Working on vehicles in the north east is a whole different thing. Love your videos, Eric. Thanks for all the hard work!

@fixitall2368 4 месяца назад

Its lifetime fluid, never needs replacing 😂😂

@Embermist69 4 месяца назад

Yep fluid for life as mentioned, however the component for life? That could be a different story. 🤣

@haywardsautomotive6156 4 месяца назад

Yep the driveshaft itself is balanced. When you change a slip yoke you don't rebalance the driveshaft. Mark dual driveshafts but most have master splines & when you change out center brgs you don't rebalance the driveshaft. I remember balancing driveshafts with hose clamps but that's too tedious so it's much easier to take the driveshaft out & take it to a driveline shop for balancing.

@bradluecke9829 4 месяца назад

Glad there was a happy ending.

@repeatman 4 месяца назад

Aaaaw, no trip to wilberts! Least we got to see you repair the car. 😊

@martij30 4 месяца назад

When I saw the first video, knowing it's NY, I would've thought this was a car from before 2005. Knowing that it's an '18 makes me realize how bad NY roads are for cars.

@vikingtu 4 месяца назад

You do the best narration and video. These guys who put a camera on their head drive me nuts and make me nauseated.

@stevedibiase728 4 месяца назад

Sometimes its the only safe way under certain conditions for them....cant afford sophisticated gear starting out.

@titaniumman_22 4 месяца назад

Love South Main Auto videos when I get home from work! What is the name of the ice cream shop you liked in town? 🇺🇸

@SouthMainAuto 4 месяца назад

Twin Kiss

@vader2774 4 месяца назад

Man that air ratchet is a machine

@1320pass 4 месяца назад

Wilberts will get their rear differential back. Maybe another year, year and a half by looking at that Boo-Ick.

@jeffkosiba1071 4 месяца назад

Match mounting is the reason a driveshaft and axle yoke are marked. They typically are not balanced as an assembly (some cars are) but checked individually for runout and marked. They are then assembled so the runout cancels each other as much as possible. So when assembling used parts, you should be looking for the original marks and assembling them match mounted again. Yes, the parts are rusty and corroded but often times the marks are still there. I can see the mark on the used axle yoke. So now you have the reason Eric O!

@gadasavideos8564 4 месяца назад

Friend was trying to get seized bar from farm wagon. I suggested heat and pbblaster. Reported back that he used a whole can with no success. Later I discovered that he bought the lubricant instead of penetrant. Meanwhile someone suggested the 50/50 acetone/tranny fliud which I was able to supply. Applied without any heating. Next day he taps the piece and it falls out.

@SouthMainAuto 4 месяца назад

That's because he beat the hell out of it the day before LOL

@OzzieKev 4 месяца назад

Regarding "witness marks", manyyears ago I owned a Jaguar. The workshop manual called for marking the wheels if removing them except for tyre replacement. Their theory was that the tyres would wear in to any runout in the hub/wheel assembly, and placing the whell back in a different position would cause fast tyre wear until it worin to the new position. Themanual also insisted tyres should not be rotated, but remain on the same corner of the car, and must be replaced as a set of four.

@chrissmithz314 4 месяца назад

22:50 Might be showing my ignorance here, but magnet on the fill plug eh? Never seen that before. Interesting

@SouthMainAuto 4 месяца назад

same plug for fill and drain ;-)

@oiygfdxssfgg 4 месяца назад

I'd definitely take my car to you, Great work.

@ozhoo 4 месяца назад

I find myself missing the roar of Mower Man in background 😢

@stevechristiansen4695 4 месяца назад

Hi from new Zealand, love the channel, I only wish my cars had mechanic like you here, hope U keep doing vids till you are so old U need a nap after lunch (that may happen now I guess) all the best from steve