19 Tips and Tricks for Scale Modelers

Подписаться 251 тыс.

Просмотров 674 тыс.

50% 1

Hey guys, in this 10-minute video I will share 19 scale modeling tips and tricks I have learned in the past two years of scale model building. Hopefully you will find these tricks and techniques useful. And as always, thank you for watching and happy building!
Wanna show some support for the channel? Grab a set of mini RB26DETT engines on my web store at junsminigarage.com. They are currently on sale!
My other videos-
1/24 model car full builds - • 1/24 Scale Model Car F...
Tracks:
------------------------------
Music from Uppbeat (free for Creators!):
uppbeat.io/t/ak/tides
License code: PXV3XTZF2DYO3BTC
------------------------------
"Warm Breeze" - Faded Æon
audiio.com/faded-aeon/aqueous...
------------------------------
"Burdened No More" - Brandon O'Sullivan
audiio.com/mozrt/blended-esca...
------------------------------
---All the tools I use to build my model kits are listed here:
Model Building Basic Tool Set: amzn.to/2ElHtMh
A3 Cutting Mat: amzn.to/3t8GmUP
Tamiya Side Cutter(75034): amzn.to/3gOcvh0
Tamiya Hobby Knife: amzn.to/3aJRTmx
Panel Line Scriber:
Tamiya Plastic Scriber II: amzn.to/34cDrRu
Trumpeter Panel Line Engraver: amzn.to/2TFD1MX
Scribing Pen with Guiding Tapes: amzn.to/3hPZQe7
Avid Power Cordless Rotary Tool: amzn.to/3gh3Y2d
Glues:
BSI Super Gold+ Glue: amzn.to/31aNVPb
Tamiya Extra Thin Cement: amzn.to/2SbDC8A
Elmer’s Clear Glue: amzn.to/3jfoEKD
Sand paper:
600 - 3000 Grit Sand Paper: amzn.to/32aryZJ
Tamiya Sanding Sponge Set: amzn.to/2XIKzAJ
Micro MESH Soft Touch Sanding Pads: amzn.to/33eik0h
Painting:
Airbrush Kits with Compressor: amzn.to/325JHb8
Dual Action Airbrush: amzn.to/34brtrn
Indoor Spray Booth with LED Lights: amzn.to/2FwxnZE
Tamiya Painting Stand: amzn.to/2Q7h8UX
Airbrush Cleaning Station: amzn.to/329T8WL
Paint Brushes for Hand Paint: amzn.to/3aGwPvU
Tamiya Acrylic Paint Retarder: amzn.to/33hrkln
Paint/Fluid Droppers: amzn.to/32aizHZ
Alligator Clips: amzn.to/3kWm2T0
Paint Mixing Jars: amzn.to/3g855RP
Primer:
Tamiya Grey Primer for Airbrush: amzn.to/30okush
Tamiya White Primer for Airbrush: amzn.to/3cLdxXb
Spray Can Grey Primer: amzn.to/2GgnKPF
Spray Can White Primer: amzn.to/2ScNRJB
Thinner:
MR Hobby Lacquer Thinner: amzn.to/3n5dFpa
Tamiya Acrylic Thinner: amzn.to/34ens3T
Tamiya Enamel Thinner: amzn.to/392nv6P
Clear Coat Spray Can Paint:
Tamiya TS-13 Gloss Clear: amzn.to/2SeIbi4
Masking Tapes:
Tamiya 6mm Masking Tape: amzn.to/348XezD
Tamiya 10mm Masking Tape: amzn.to/3ibshj7
Tamiya 18mm Masking Tape: amzn.to/3igOXOU
Tamiya 40mm Masking Tape: amzn.to/2Oln2EV
Tamiya Masking Tape for Curves(2mm): amzn.to/36mfSXo
Tamiya Masking Sticker Sheet: amzn.to/3EGWHFf
Chrome Paint:
Spaz Stix Mirror Chrome Paint: amzn.to/3iSgib9
Molotow Chrome Paint Pen 1mm: amzn.to/3gbNjNC
Other goodies I use:
TAMIYA Polishing Compound Fine and Finish: amzn.to/2G1X1q1
Tamiya Polishing Compound Sponges: amzn.to/3mBhXVA
Tamiya Panel Line Accent Color Black: amzn.to/2EJlPSQ
Tamiya Mark Fit Strong Decal Solution: amzn.to/3n3D82w
Tamiya White Putty: amzn.to/33jY4dP
Tamiya Weathering Master(Oil Stain): amzn.to/36ksrCr
Surgical Scalpels: amzn.to/3dSlMTu
Cotton Polishing Wheel Set: amzn.to/2OGaEzs
Duck Poster Putty: amzn.to/2Yix37r
Pentel 0.2mm Ultra Fine Mechanical Pencil for Panel Lining: amzn.to/3iTPLKw
Ranger Gunmetal Embossing Powder: amzn.to/2Q6AyJR
Hero Arts Embossing Powder(Red): amzn.to/30kfogI
Milliput Superfine 2-part Putty: amzn.to/2YgExrM
Air Blower and Duster: amzn.to/3igk7pZ
Mini Hand Saw: amzn.to/3mXY1Mt
Sharpie Red Fine Point: amzn.to/3ihius3
Sharpie Silver Metallic Fine Point: amzn.to/30hC8hu
NT Circle Cutter: amzn.to/32Nq8Iy
Tamiya Compound Applicator Cloths: amzn.to/3HI8YLN
Hasegawa Mirror Finish: amzn.to/3mXJeTy
GodHand Glass Cutting Mat: amzn.to/3pUtWAG
My Camera Gear:
amzn.to/36krgDd
Music Used In My Model Building Video is Licensed through Audiio.com
audiio.com/pricing?oid=1&affi...
Use Discount Code "Save10" to Knock 10% Off All Audiio Products (Annual, Lifetime, SFX).
______________________________________________________
DISCLAIMER
Some of the above links are affiliate links, meaning, at no additional cost to you, I will earn a small commission if you click through and make a purchase, you are not obligated to do so, but it does help fund these videos in hopes of bringing value to you.
#Scalemodeling #scalemodelcars

Авто/Мото

Опубликовано:

19 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 546

@JamLeGull 2 года назад

I’m an aircraft modeller mainly, but one tip I have is to never throw out old paintbrushes. A beat up old brush might not be good for detail work and getting a nice finish, but it will be fine for messy and rough treatment that would ruin a good brush such as weathering, applying texture or using glue. Once the brush is completely destroyed, you can still use it as a glue applicator, or to hold something while you paint it. You can even make your own specialised tools and use the old handle for it.

@JunsMiniGarage 2 года назад

Great tip! Thank you for sharing James!

@KILLOTINEFTP Год назад

Exactly this is so underrated in so many aspects both in and out of modelling thank you for posting this🙏🏻

@jamesott4095 Год назад

Thank you !!

@KarlRich10 3 месяца назад

does this trip work on tank models too?

@MrMcKane 2 года назад

Great tip I tried recently. If anyone is painting a car body in a highly pigmented colour like red and is also going to be using white decals on it, clear coat in between to form a barrier coat. This stops any white decals from turning pink.

@RKC573 2 года назад

Have to remember that last tip the most to have a good time and enjoy this hobby. I know myself I have obsessed over the smallest detail that didn't turn out right. Love the channel! Keep up the great builds!

@krystianbinkowski6487 2 года назад

Or telescopic antenna from eBay for 2£

@AliAsghar-ye3dk 2 года назад

YIN binoon on

@mikexii13 2 года назад

I am impatient/enthousiastic to see the end

@tykoulapdara2282 2 года назад

I’m just trying my work

@memorylanemodelcars Год назад

4 years Ago I learned Something New I'm 61 been Building Model Cars Since 11 Make Sprue Rod Putty Using Testors Liquid Cement in the Glass Jar with the Brush you Add Small pieces of Sprue to it then shake it up let Sit 3-4 days then Check it add sprue to thicken the Sprue Putty Can Fill Gaps, Repair Broken Bodies Etc after it Gasses Out it Can be Sanded it makes Seamless Gap Fixes Amazing things Can be Done With it. I Wished I'd known About it as Teenager

@TomGlander 9 месяцев назад

Your last suggestion was pure gold. This is a hobby, and I should relax, not get upset. Slow down, enjoy the process, and realize the next one will be better.

@CycolacFan 2 года назад

Been building models for almost 40 years and I still learned some useful tips in this video. Great work 👍👍

@allenthomas622 Год назад

agreed.. been building for 25 years and learned new tricks. I knew about the wires. I do that for my 18 wheelers for the hoses at the back of the cab. and I've used the trees to make all sorts of things from engine hoists to custom frames,. the radio antenna ik for 18 wheeler exhaust as well. and what blew my mind. was the rust paint. and the totally awesome to stripe chrome, yeah blew my mind. what have I been doing with myself, no more sanding lol 🤯🤯🤣

@Racer7331 2 года назад

I build scale model trucks. I love your channel and after seeing you use ribbon to make racing belts, I had the idea to use yellow ribbon to make straps to secure loads to flatbeds.

@popples4973 Год назад

Great idea, I will have to try it out. Thanks for the tip.👍

@jccoram8121 Год назад

Wow yeah thats a good idea

@alexesparza5384 2 года назад

If you're ever tearing apart some old wire, you may want to save the little tiny copper strands of wire, as you can wrap them around a thin needle to make small springs for carbureted engines.

@Deadmau5l 2 года назад

And dont give up! 2months into the hobby ill admit my first few models were okay but issues along the builds nearly made me give up. I finished my 6th model yesterday but id say its my first proper model. Dont want to blow my own trumpet but im impressed with my work and so happy i didnt give up.

@automotiveenthusiast1160 Год назад

The last model car I built was in 1998. I have recently purchased a few models and these tips are awesome. I hope I can improve on building these models now that I have a lot more patience than when I was younger. I will be doing a model soon with my son and hope he can get into the hobby. Plus he'll learn about car parts too as an added bonus. Hopefully this will lead him to enjoy all manner of automobiles from design, to repairs, and the talent that goes into the car culture in general. But we'll start with this hobby and go from there.

@847tjames 2 года назад

I have been model building for a few years. I clicked on this video expecting to know most of the tips and tricks.... i didn't think I'd pick up so many new ones! Thank you! Brilliant video!

@sauceboss2210 2 года назад

For the custom exhausts, you can also use the cheap extendable inspection mirrors, backscratchers, and magnets you see at hardware stores. I work at autozone and I can usually get 2 or 3 for $6

@michaelpotter9345 18 дней назад

Recently retired, used to put kits together as a small Boy, Im amazed at the quality and detail in modern kits, watching videos like this are giving me a goldmine of information, now to go make some model cars,

@eaubfelangy8132 2 года назад

I most often use felt as my carpet because a more realistic feel but I definitely admire the power idea. I also install working lights lights in my models too. The small CR2032 battery cases I put on the undercarriage or in the trunks

@cloud4565 2 года назад

This channel has by far the best model making tricks I've seen like the time you made seatbelts or the more accurate exhaust with the tv antenna and lighter (which was my favourite) nice job!

@mikejungferman4744 10 месяцев назад

The take home message i get is think outside the box, nothing is in stone, use your imagination, thats where the fun starts, very cool man,thank you

@bakayaro117 2 года назад

I just ordered my first Initial D 1/24 scale model. Thanks for the tips and tricks.

@lele_frosi 2 года назад

Thank you for tricks and tip But thank you so much for the last tip

@danielross1033 2 года назад

Good advice for modelers thanks I’m gonna try the rust technique

@skipjohnson9358 2 года назад

Thanks for the tips Jun 🔥🔥🔥🔥

@pocolashon 2 года назад

Got this video as a suggestion and thought "it will be one of those useless ones, not gonna watch it". At the end I clicked on it because I wanted to see whether you coated the carbon fiber (it looked shiny). And I am pretty glad I did, awesome tips. I never thought of the aluminum stick or the antenna. The rust was neat too. Thanks a lot!

@user-dw1ju6yo7y 2 года назад

Very helpful video👍, i think last tip about time is the most important.

@kendaullary4102 2 года назад

For sure, sometimes I can become way to obsessed and stressed and it’s supposed to be relaxing. 100% agree

@jerrypuckett6733 5 месяцев назад

I’m 63 and getting ready to build a 66 Shelby model. These are some awesome tricks that I never new. Thanks.

@therealstevebuscemi7703 2 года назад

"This is a hobby, you do this because yoy want to relax" 🌠

@Iloveak123 2 года назад

Great tips! Thank you for sharing these Jun!

@THROTTLEPOWER 2 года назад

Great vid thanks for sharing! 👍👍👍

@djvycious Год назад

AWESOME tips! I'm stealing all of these! To share a tip of my own: You can get metal ducting tape (not plastic duct tape but metal tape) at all hardware stores. This is great for cutting a piece and sticking down as metal shielding in engine bays or engine areas of Formula-style cars. The textured sealing foil from yogurt containers or foil of cigarette packages is great for easy exhaust shielding!

@morefurless Год назад

As a person who just bought their second ever model car, this helped me a lot, subscribed for this video

@glenndelconte2648 7 месяцев назад

I thank you for the modern tips and tricks. I am going on 62 and built my first plastic model at age 6 in 1967. I taught myself modeling tricks back then. I would NEVER paint parts on the tree. For me, it was better to trim the parts, clean the cut edges, place them on double sided tape, spray paint one side, dry, flip and repeat. No messy, cut edges to touch up with a brush. You can take the tires and hold one in your thumb and forefinger and drag it across sandpaper while rotating the tire to make it look real and used. I used colored felt in 1/24 and 1/25 cars for carpet, wrapped aluminum foil with glue around chrome parts, and cut a click pen spring in half to make working suspension. You can cut the plastic front end suspension parts and melt needles into the body to make the front steer! My first ignition wires were 9 cut lengths of yellow phone wire, wrapped in a loop and glued at the distributor. I had a needle on a wooden stick, heated with a candle to melt holes in the cylinder head to insert the wires. Another idea was stretching cotton swaps out of the exhaust, or tires on a diorama, and brushing black paint to simulate smoke. On old Nascar models, cutting slits of black electric tape (or pin stripping) would work to simulate the reinforced front windshield and rear window. Use a black marker on the clear window parts on the outside edges before gluing and it will appear more realistic. Old Nascar hood pins could be made from cutting and bending paper clips. Coax cable with a wrapped, braided shield makes nice engine hoses. I used to paint the Goodyear tires using a dab of white (or yellow) paint on a toothpick, brushing the paint on the side of the tire on the raised lettering. When dry, you can scrap away the mistakes and then coat the tire with clear. You can paint worn aluminum parts using aluminum paint, then lightly brush over the parts with a scouring pad to age the finish. Thanks Jun.

@taylorruss 13 дней назад

Using actual rust for rust effects is unreal. Love it.

@jmchau66 2 года назад

Very good tip especially the last one... just enjoy and have fun! Seems basic but I for one definitely forget that's the whole reason why I build model in the first place. Thanks again for a great video.

@fokker1138 2 года назад

8:57 I always used Ultra Fine point Sharpie markers instead of panel line wash since they come in a variety of colors and offered a lot of control. The tips are 0.3 mm, but you can get away with pinching them a bit narrower with pliers if you're not too rough.

@danmurphy5889 Год назад

The steel wool in vinegar is gold, awesome tip.

@Car_model_channel 2 года назад

You are enjoying the plastic model. It will be very helpful. Very nice! thank you.

@boomer8393 Год назад

Those are excellent tips! Hell, I've been modeling for over 53 years, and some of those are new to me. Well done.

@sanjayram1101 2 года назад

Goodness me, all the tips are extremely practical!

@BOABModels 2 года назад

I'm looking through my cupboards for useless wires straight after watching this! Great tips - keep up the good work, Jun!

@SammyM00782 2 года назад

Dude, thank you. I had no idea how many products and tips and techniques there are to scale car building. Holy crap. I've gone into YT hell over the past few weeks just learning all this cool new stuff. It's been just over 20 years since I last did a model. In fact, I just finished the two I started and never finished because of those 17-21 year old days haha. I have a Tamiya 24282 I'm about to start, and I want this one to look really nice...but no air brushing yet. Ya'll have that subtle touch of the hands, I install large heavy doors for a living. I manhandle everything

@F40Driver 2 года назад

Thanks for the tips! I´m a 1:18 model collector and I love to add details to my cars.

@nickoneill4918 2 года назад

Awsome tips its so easy to rush through it.. best tip is take your time

@alcaraballo4211 2 года назад

Thank you, I use to build models when I was younger... Thanks to you channel I've started again. 🙏

@darrinmcelroy9941 2 года назад

While model car building is not my chosen form of model building, I always like to see what the other modeling communities are doing. Some of these were actually really interesting.

@derniko1992 7 месяцев назад

taking time is the most important tip. I always want to hurry when building and mess things up. So modeling is good for learning how to make things step by step and taking lots of time to do something cool and wonderful.

@leonscheepers5350 5 месяцев назад

I really enjoyed that, thank you. Getting back into it after about 445/50 years - concentrating on cars (as a kid I did anything WWII) so this was relevant :)

@phinozomu358 Год назад

NGL that Raised painting tip is gonna come in SUPER handy, thank you so much!

@BenjWarrant 4 месяца назад

What a totally fantastic set of tips. Like your usual tip video, but 190% more concentrated! I particularly like the one about applying paint with a piece of card. I will definitely be using that.

@grooveholmes79 2 года назад

Some great tip's here Jun! Keep the videos coming!

@Jared-C 2 года назад

Thanks for the video! Some videos on YT make modeling seem a bit too serious and involved, but you make it approachable and don't mind sharing the things you've learned. For someone who got back into the hobby as an adult, I appreciate that and always look forward to your builds.

@edouardj.bernard1690 2 года назад

I haven't built a model car in 40 years, but I recently bought three kits online and am hoping to get back into it. This is the first video I've watched to help me get going again, and I can't thank you enough for these tips. Things have changed a lot since I was younger, and now I am learning all over again. You have helped me. Thank you again. I have clicked the Like button and subscribed. I am going off now to see what other videos you have made.

@user-pe1zs2pn4n 4 месяца назад

I’m just getting back into building model cars, and this has been the best RU-vid video I have seen so far! Thank you for sharing all of these valuable tips. A lot of these are new to me as I have not built any model cars for a few decades now! Lol.

@patoyautomotives 2 года назад

19, best tip. I tend to forget taking my time and just enjoy

@axemanchris 2 года назад

Great tips!! I love the carpet technique, I'm going to try that on my new build!

@andynuke1979 Год назад

I have used metal tape, made for sealing duct work for chrome strips or rails. It's thin enough to cut and press down easily, polishes up well, and is self-adhesive. It's also a lot cheaper than some of the fancy foil you can buy

@jesseortega8598 2 года назад

Very cool video! Great ideas Jun! Thanks for the tips!

@lennonwhitehead1352 Год назад

Stretched Sprew for glue application is brilliant! Thanks for sharing.

@austinsrants5928 2 года назад

Thank you for the tips and tricks! We all really appreciate it! I love your channel and work! I’ve been building models for a little over a year now and always rewatch your videos to learn something new.

@tcandle695 2 года назад

Thanks for the tips. Aftermarket parts and details for car models can be expensive specially PE parts. I like the idea of recycling materials and sourcing or re-purposing things to detail the models.

@Fernioska Год назад

Wow… that’s a lot of detail Jun! Thanks for sharing these tricks 🎉

@aikanaroringerilbaggins7427 2 года назад

Thanks for the tips, great work

@allanlowe9346 2 года назад

Some really useful tips that I will use for sure. Thanks for sharing these Jun.

@KitBuilderChris 2 года назад

What an excellent video Jun, there's a few tips in here I could definitely try and use to try and improve my builds, thank you very much!

@LOGEZZZZZBRO 2 года назад

Great video! Thanks for all you’ve taught me over the past year and for getting me into this hobby. Love your videos, Jun!

@thestytch 2 года назад

This was such an inspiring video. From all the helpful tips to that final super important tip about remembering to have fun with your hobby. Many times we get to focused on the end result and forget to enjoy the journey and just hearing you say it helped remind me of that. Great video!

@kArL-ij5hz 4 дня назад

Ive had to have watched this video a million times. I'll watch it and it'll pop back up in my for you and I'll watch it again great work! Learn something new every time!

@GBAMERICA123 2 года назад

You sir are a true modeler, amazing. I haven’t seen any other detailed with such great advice. Thank you🙏🏽

@johnpadams8079 2 года назад

This is the best tips & tricks video I have ever watched ! And I have watched a lot of them ! Very clearly explained and you didn’t drag the explanations out so long that I fell asleep waiting for the next tip like the other video’s. I loved this !

@666_Jesus_sucks 5 месяцев назад

Wow your attention to detail is unmatched. Beautiful work!

@hadynmcloughlin4661 2 года назад

Thanks for a great video just bought my first model making tools after watching your other videos to do my first model - a silver Tamiya Skyline

@briankachelman Год назад

I'm just getting back into modeling and have gotten inspiration from your videos! I really like this one because I wouldn't have thought of some of these tricks... Keep up the amazing work!!!

@Saetchel 2 года назад

Tip #11 is something I’ve never would have thought of🤯 so good

@dalekloka7069 2 года назад

Thank you for the help. I appreciate the knowledge your sharing. Thank you again!

@gdonaldson26 2 года назад

Some really good tips in this video that I've just never thought of before! Thank you very much!

@geekdiggy 10 месяцев назад

thank you for all the tips. i'm getting back into scale modeling for the first time in 25 years and i've been spending time looking around youtube for inspiration. we used to use some of these tips back in the day, but other tips you suggest would have never occurred to us! just brilliant! keep up the good work!

@jbreininger 2 года назад

Thanks a lot. Building Tamiya ford gt now. Real helpful, get ideas for extra details, will definitely be using some of your technique's!!!

@tomwright943 2 года назад

Lovely video mate 😎👌 thank you for sharing 👍

@theapprenticebuilderchris3006 2 года назад

Thank you for sharing your tricks and tips. Looking forward to your next build.🙏🏻👍

@Appliance-Advice 3 месяца назад

Great tips. I’m just getting back into model building. I love the tip for carpeting.

@madmike8v72 2 года назад

Great video! Subscribed. This is a wealth of information, thank you.

@howardharaway2259 2 года назад

There is one thing I do on my car models once in a while I've yet seen anybody else do. The wire that holds down the cap to the brake master cylinder. With a pin vice and some some guitar wire or even a school of brass wire it's pretty easy.

@IlBlackoutlI 2 года назад

Tip: desoldering wick comes in various sizes and it's like a sleeve that can be used to make a heat shield for turbos or manifolds

@kendaullary4102 2 года назад

Great idea man!

@rickyedison5151 Год назад

These tips are great . Thanks for sharing . Just getting back into modeling after 20 so yrs . Please post more . Wrapping wire for plug wires had no idea . Battery terminals battery posts wiring and the muffler all are excellent ideas . I will use them for sure . Thanks .

@georgemorrison8026 2 года назад

Lots of great tips in that one short video. You do great work thanks for sharing.

@stephaniewright4336 Год назад

So happy to have discovered your channel today. Thank you for all the great info. I look forward to watching more of your videos.

@t3hgir 2 года назад

that carbon fiber sock trick is next level!!!

@dwayneswaffer5040 4 месяца назад

Got back into modeling cant wait to try some of these tips out

@imlost6050 Год назад

Thank you jun! Love your videos and you got me into doing model cars!

@_BAD_MERC_ 2 года назад

This was some of the best model building tips I've ever seen in my life. I'm 52 years old and I didn't know any of this.

@lorenzorusso8293 2 года назад

Not only do you have incredible models, but you also have some amazing tips & tricks.. I love all the cars you do and you've inspired me to start modelling aswell. May I suggest a Hayabusa as your next build? Motorcycles are quite fun 😉

@ztjcarolina 2 месяца назад

Thank you so much for your advice at the end of the video. I am trying to relax. I can take my time and not focus on the end. It isn't like I have to turn it in at the end of the week or whatever. Cool tricks!

@robertbernahliii6495 2 года назад

You can also bend the chrome straight pins into window cranks and even door levers and handles for interiors.

@slsamg_5thscale 2 года назад

I really like the tip with the carbon fiber. Personally, I don't own an airbrush so I made my own carbon fiber decals with decal paper and some resized carbon fiber pattern. You can even make glossy or matte patterns depending on the clear coat.

@modelbreeze1916 2 года назад

Great tips! I haven't built any model cars yet and mainly focus on aircraft and armour but these tips are definitely transferable. Thanks :)

@diegoruiz-hernandez273 7 месяцев назад

I am speechless. Thanks for this. You are an artist mate!

@tint661 3 месяца назад

I am getting back into building model cars again. When I was in high school I had a group of friends. We would get together and trade parts and building tips. I really like the tips you shared. Thank You.

@bubbapipe 2 года назад

That was awesome! Thank you for sharing your tips and tricks. This is sure to bring my level of builds up a notch.....thank you.

@dxve5729 2 года назад

Thank you! I was waiting for this for this video❤️

@krzysztofmathews738 Год назад

These are all excellent tips, and several of them are new to me. Thank you for putting this video together!

@fendrzwag2196 2 года назад

I just bought a whole variety of items including everything you need to build/make and paint model cars for about €250. I'm only waiting for the car to arrive. Can't wait to build my first model car!

@Mr351Ford 2 года назад

Thank you for these terrific tips!

@V1KTOR33 Год назад

Great video! I learned a few things here. When masking lines I will paint the base color first so any bleeding will blend than do the color your actually painting.