Тёмный

#191 

Andreas Spiess
Подписаться 475 тыс.
Просмотров 198 тыс.
50% 1

Knowing how your antennas work or build and optimize our antenna is very rewarding. Unfortunately, it needs know-how and some costly equipment to do that. Today we will change that, and I show you an affordable new tool that enables these tasks. This small device was one of my best investments I made so far.
My HAM Radio channel: / @hb9bla
At the end
- You know how to build and optimize a LoRa ground plane antenna
- You will know How to tune a commercially available antenna
- You will get a little theory behind it, as usual
And we will have a close look at this small gadget from China and compare it with a professional tester
Links:
N1201A Antenna Tester: s.click.aliexpress.com/e/Nhr3Xedw
Calibration Set: s.click.aliexpress.com/e/q3VbiQ7 or s.click.aliexpress.com/e/VJeqJY7 (not tested)
N2201SS (2 ports): s.click.aliexpress.com/e/CHDgGnr2
Ground Plane calculator: www.buxcomm.com/ground_plane_c...
SMA connector for Antenna: s.click.aliexpress.com/e/RBAYzbU
What's inside the N1201SA: notes.superlogical.ch/?p=89
Supporting Material and Blog Page: www.sensorsiot.org
Github: www.github.com/sensorsiot
My Patreon Page: / andreasspiess
If you want to support the channel, please use the links below to start your shopping. No additional charges for you, but I get a commission (of your purchases the next 24 hours) to buy new stuff for the channel
For Banggood bit.ly/2jAQEf4
For AliExpress: bit.ly/2B0yTLL
For ebay.com: ebay.to/2DuYXBp
profile.php?...
/ spiessa
www.instructables.com/member/...
Please do not try to Email me or invite me on LinkedIn. These communication channels are reserved for my primary job
Equipment in my lab: www.sensorsiot.org/my-lab/

Наука

Опубликовано:

 

23 мар 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 733   
@romiolover6852
@romiolover6852 6 лет назад
i am an electronic engineer for around 20 years and I can tell that this tutorial is one of the best tutorials I had seen
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you for your nice words!
@BobDarlington
@BobDarlington 3 года назад
Maybe that's the difference. I do this stuff for a living. Lots of errors in the first 5 minutes.
@1001011100101001
@1001011100101001 3 года назад
@@BobDarlington Perhaps we could all learn something if you share what you believe these errors are? Otherwise your comment is not only useless, but annoying.
@martym2464
@martym2464 2 года назад
Very true.... and that's when someone is super knowledgeable and super funny and knows how to combine them :)
@pequeajim
@pequeajim 2 года назад
@@martym2464 agreed!
@brunobraga767
@brunobraga767 6 лет назад
This man is the best eletronics and DYI RU-vidr, not only he explains why things work like they do but also tells the truth and shows what he means. Thank you Andreas for making these videos and helping thousands making little projects that seemed impossible before!
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you for your nice words!
@Starfishtroopers
@Starfishtroopers 6 лет назад
Now when I am working with electronics I have a Swiss voice in my head.. Dankeschön
@AndreasSpiess
@AndreasSpiess 6 лет назад
Bitteschön!
@SteveWrightNZ
@SteveWrightNZ 6 лет назад
This unit is excellent. This one of the most addictive radio tools I have every owned - just cannot stop making antennas!!
@sethalump
@sethalump 6 лет назад
As a life long antenna building nerd, I really appreciated this video. I've had my eye on one of these inexpensive VNAs for some time. Now I'll be sure to get one.
@AndreasSpiess
@AndreasSpiess 6 лет назад
I am sure you will enjoy it.
@0miker0
@0miker0 6 лет назад
One of the best videos of 2018. Thank you for explaining things I’ve always wondered about my whole career.
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you for your nice words!
@FindLiberty
@FindLiberty 6 лет назад
The expensive equipment had unlocked the, "black art of RF" to me decades ago. (It's easy with the right tools.) THANK YOU for your _perfectly_ concise explanation of the theory, and FOR SHOWING THESE _DELIGHTFULLY AFFORDABLE_ DIY TOOLS!
@AndreasSpiess
@AndreasSpiess 6 лет назад
You might be aware that I was (sightly) delighted too when I made this video...
@stevemacbr
@stevemacbr 4 года назад
AGREED - #MeToo LOL >>> I relied on the maths and precision construction,... but was BLIND to the real / actual tuning. .
@StephaneHollande
@StephaneHollande 6 лет назад
Thank you Andreas, as a French, I like your Swiss accent, and I remain admirative in front of the simplicity with which you can explain complex subjects ...I'll keep watching your multiple videos and keep learning ... Your experiments basically save me the hassle of trial and errors, and help me to go straight to the right solution. Bravo !
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you for your nice words!
@clarkturner9413
@clarkturner9413 4 года назад
This is good work, Andreas. You explain things very clearly so that I can understand things that I have not understood for many years. Thank you so much.
@AndreasSpiess
@AndreasSpiess 4 года назад
You are welcome! Glad my videos help.
@JohnBaxendale
@JohnBaxendale 3 года назад
Andreas, you are a legend. I learnt more in the first 5 minutes of this video than I had in months of playing around with DIY antennas :)
@AndreasSpiess
@AndreasSpiess 3 года назад
Antennas are not easy and the knowledge is not widely spread. So I am glad the video was helpful.
@Aemilindore
@Aemilindore 6 лет назад
Thank you for getting into antenna theory. Because your explanations are so easy to understand, I think I will be able to learn basics of antennae theory from this series
@AndreasSpiess
@AndreasSpiess 6 лет назад
You are welcome!
@chrisgreece52
@chrisgreece52 6 лет назад
I have learned more things from your videos on practical and theoretical electronics than in my 4 years in the EE school.
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you!
@JasonCarlson
@JasonCarlson 6 лет назад
Again Andreas has surpassed all the others!! You earned my patronage!!! Keep up the good work!!
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you for your support!
@LeonBotha63
@LeonBotha63 3 года назад
I really enjoyed this as well as quite a few other videos you have produced, thank you.
@AndreasSpiess
@AndreasSpiess 3 года назад
Glad you enjoyed it!
@murrayzhong3968
@murrayzhong3968 3 года назад
I have no experience and knowledge about antenna. But I am learning a lot from your tutorial. Thank you so much.
@AndreasSpiess
@AndreasSpiess 3 года назад
Glad to hear that!
@ColeDedhand
@ColeDedhand Год назад
I have been using a nanovna for a couple of years and have found it very useful for tuning and troubleshooting antennas. Every time I use it I am amazed that such a cheap tool can give me the same information as the $80,000 analyzer I use at work. Obviously I don't expect it to be perfect but I have compared it and found it surprisingly close.
@AndreasSpiess
@AndreasSpiess Год назад
I agree. When the first cheap devices appeared on the market, I had suspicions and also compared it with an expensive instrument. Already then, the results were usable for my purposes.
@deangreenhough3479
@deangreenhough3479 6 лет назад
Ok, Ok....... so once again you introduce me to another topic (I thought I had no interest in). Once again your enthusiasm for the subject, along with the way you present, is just a dream. At the speed you are going, I have to wonder what wonders you have for us in the future. My life is enriched every Sunday by your work and often I spend the week thinking it over. I’m surprised you hardly mentioned how much you loved your new tool 🤥 Keep going Andreas, you are an authority on so many subjects.
@AndreasSpiess
@AndreasSpiess 6 лет назад
I had 61 years to learn. So, some things are buried somewhere in my brains. Like antenna theory. I had to build my own antennas when I was a radio operator in the war zone of N'Djamena already in the 1980s ;-)
@pliniobass
@pliniobass 3 года назад
I watched this video in the past and now I went back to watch it again to ask questions. I'm just frustrated that I can't press the "Like" button again. Thank you again master.
@AndreasSpiess
@AndreasSpiess 3 года назад
Thank you. Did you watch my newest ones about the topic?
@ristomatti
@ristomatti 6 лет назад
Super useful information presented in a clear, concise and convincing manner. Thank you once again! Anxiously waiting for the next video...
@ristomatti
@ristomatti 6 лет назад
Order for the tester placed. My guess is that Shenzhen Boss Digital Electronic Co is going to be very happy for this video also. :) Tip for people not using the AliExpress app - very often products are discounted for mobile orders. In this case 6% discount. I've been wondering why this is with a tin foil hat in my head.
@AndreasSpiess
@AndreasSpiess 6 лет назад
This was the last antenna video on this channel for a moment. Other topics are waiting...
@waltsteinchen
@waltsteinchen 6 лет назад
I *really* like how show some theorie , but always tied to practical usage! Had to order that device .. no chance to resist ;)
@FindLiberty
@FindLiberty 6 лет назад
Yes; resistance is futile. Now order yours right away, if you have enough capacitance.
@AndreasSpiess
@AndreasSpiess 6 лет назад
+ Water: I am sure you will enjoy it.+ FindLiberty: I like your comment!
@skewedmaker
@skewedmaker 6 лет назад
Your videos are always interesting and I always learn something useful.
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you!
@gertux
@gertux 6 лет назад
It seems you really like your new tool ;-) Thanks for the content, very interesting, as usual.
@AndreasSpiess
@AndreasSpiess 6 лет назад
Yes, it is very useful for me.
@MoTown44240
@MoTown44240 6 лет назад
I typically transmit signals from 300 mW to 3 W when trying to communicate with my Amateur Radio. Prior to recent times the technology that you describe was not available to most hobbyists. Glad that technology is making measuring devices like this that I can afford on my retirement pension. I enjoy building my antennas, mostly for HF.
@AndreasSpiess
@AndreasSpiess 6 лет назад
Things changed considerably since we were young. And now I feel like living in a "electronics paradise"
@v-king936
@v-king936 6 лет назад
Thanks Andreas, as usual, your videos are excellent and will save us lots of RF-hassle!
@AndreasSpiess
@AndreasSpiess 6 лет назад
You are welcome!
@mikehudson3620
@mikehudson3620 6 лет назад
That does it !!! It's 40 years since I used a Smith chart. 15 years working with HF/VHF/UHF antennas with the old tools. What would we have given for tools like that? Yes, I see why you fell in love with it! I'm off to your Patreon channel - give us more like this.
@AndreasSpiess
@AndreasSpiess 6 лет назад
This is the reason I like this part a lot...
@vu2kgb
@vu2kgb 3 года назад
Great video and simple description. I have a PS 100 model of it and I find it very useful for tuning the POTY antenna for QO-100
@AndreasSpiess
@AndreasSpiess 3 года назад
Did you see my videos about the QO-100?
@KunalGautam
@KunalGautam 6 лет назад
Like previous video on antenna, this video is really useful. I'd like to thank you Andreas for sharing useful videos.
@AndreasSpiess
@AndreasSpiess 6 лет назад
You are welcome!
@sethalump
@sethalump 6 лет назад
LOL! I remember in trade school asking the head of the electronics department about antenna matching. "Complex impedance.... That is a dark art of the field" Nice to see it described as such from you.
@AndreasSpiess
@AndreasSpiess 6 лет назад
:-)
@TheGg6422
@TheGg6422 6 лет назад
You make very nice videos, for me some parts are review but some is new, kind of to radio stuff but have done electronics for years. Thanks again for sharing!
@AndreasSpiess
@AndreasSpiess 6 лет назад
You are welcome!
@billseward2274
@billseward2274 4 года назад
I learned more about antennas in this 16 minute video than I did from by Extra Class license course. Thanks!
@AndreasSpiess
@AndreasSpiess 4 года назад
Not good. They should learn you how it works before you buy a 1kW amplifier ;-)
@billseward2274
@billseward2274 4 года назад
They do, or at least they try. But it's presented as if you're an electrical engineering student. That's doesn't work with everyone. Definitely didn't with me, and I spent a career in technology.
@darrylday30
@darrylday30 3 года назад
Excellent! I love the lesson plan and summary. It helps reinforce learning.
@AndreasSpiess
@AndreasSpiess 3 года назад
Great to hear! Thank you.
@edwatters6377
@edwatters6377 6 лет назад
I also purchased the N1201SA so I can fine tune my 915 MHz LoRa antennas. Your video is great. KC2ORP
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you!
@logicm6365
@logicm6365 Год назад
Well explained.. Always your style of presentation is easy to understand and very useful for beginners..
@AndreasSpiess
@AndreasSpiess Год назад
Thank you for your kind words!
@TonyLehto
@TonyLehto 6 лет назад
You best video so far! That explained a lot! Good work! Now the logical next step is to explain impedance even deeper.
@AndreasSpiess
@AndreasSpiess 6 лет назад
This was the last video on antennas for a while. There are better channels for that if you are interested in antennas. I want to keep this channel broad, and not trivial, but not only for specialists.
@bardenegri21
@bardenegri21 6 лет назад
Very nice, I've had this thing in my wishlist for about a year now. Guess it's time :)
@AndreasSpiess
@AndreasSpiess 6 лет назад
Enjoy!
@acestudioscouk-Ace-G0ACE
@acestudioscouk-Ace-G0ACE 2 года назад
Really excellent teaching here, learning points well made and useful information. Thank-you.
@AndreasSpiess
@AndreasSpiess 2 года назад
You are welcome!
@noweare1
@noweare1 6 лет назад
Its a great time to be alive if you are in the electronics/technical/software fields
@AndreasSpiess
@AndreasSpiess 6 лет назад
You are absolutely right. I enjoy it every day!
@HelmutTschemernjak
@HelmutTschemernjak 6 лет назад
Super great video, I love this N1201SA device. BTW: The open/closed SMA connectors are easy to build for everyone. For the 50 Ohm load, a 100 Ohm 0.1% (two parallel ERA-6AEB101V Panasonic) resistors will do the job.
@AndreasSpiess
@AndreasSpiess 6 лет назад
So you were more successful than me. We did some tests with a "homemade and a "bought" open and short. The differences were noticeable already at 868.
@JakeHarris0
@JakeHarris0 5 лет назад
"like a good politician, if a method does not work, we just use more of it" HAHAHAHA!!!!!
@jamesgoacher1606
@jamesgoacher1606 4 года назад
It is a little like an Englishman trying to speak Swiss. English Loudly, then more Loudly.
@flexairz
@flexairz 3 года назад
Spot on, we see that every day now.
@Giblet535
@Giblet535 6 лет назад
Excellent video! It's worth adding that altering an RF transmitter's performance in any way can easily put you on the wrong side of the law in one's home country, and that doing so is obviously (and entirely) at their own risk.
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thanks for your info. I hope, my viewers know what they do...
@tornadokat
@tornadokat 6 лет назад
Something else I didn't know I needed until now LOL This would have been awesome 30 years ago when I was doing VHF/UHF radio work.
@AndreasSpiess
@AndreasSpiess 6 лет назад
You are right. We live in a wonderful world (electronically)
@martinsauerteig4882
@martinsauerteig4882 6 лет назад
Again a very good video! Thank you very much. I ordered a N1201SA this morning via your link and hope, you'll get your "fee".
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you for your support! I hope you will like it.
@gte24v
@gte24v 6 лет назад
Great video again, I will have to have one of those analysers, I was brought up on an HP VNA and have seen that the price of professional equipment has tumbled down in recent years. Remember the Anritsu Sitemaster? So helpful to have the comparison with a 'known good' analyser - better than any sales pitch. Now, what would be interesting (because you like testing outdoors and now have the tools) it would be really interesting to show the impact of antenna optimisation on your radio link budget in real terms of RSSI. Again, great video, keep it up. (Ian T) :-)
@AndreasSpiess
@AndreasSpiess 6 лет назад
This was the last antenna video for a while on this channel. Many other topics are waiting...
@stevemacbr
@stevemacbr 4 года назад
Such a good tutorial,... I bought one for analysing my home-brew antennas I make for mobile coverage & repeaters. . .
@AndreasSpiess
@AndreasSpiess 4 года назад
You are not alone,. These cheap VNAs became quite popular. And very handy!
@stevemacbr
@stevemacbr 2 года назад
@@AndreasSpiess - Good day, and apologies for not responding to your kind reply above. - Did you ever measure the FINAL cut length of your TUNED antenna ??? >82mm or
@joelo_benitez
@joelo_benitez 3 года назад
Eres lo mejor que le ha pasado a la Ingeniería Electrónica!!!
@AndreasSpiess
@AndreasSpiess 3 года назад
Thank you. Maybe you watch also my video about the NanoVNA...
@alexanderbecker8924
@alexanderbecker8924 6 лет назад
Einfach super! Ich habe schon lange darauf gewartet.Vielen Dank!
@AndreasSpiess
@AndreasSpiess 6 лет назад
Bitte, gern geschehen
@opk157
@opk157 6 лет назад
I can only confirm: I own one and I love it - so much better than calculations ;)
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you for your feedback. It is very valuable for others
@dimkars
@dimkars 6 лет назад
Thank you! So much useful info in such a simple way!
@AndreasSpiess
@AndreasSpiess 6 лет назад
You are welcome!
@Harani66
@Harani66 6 лет назад
brilliant. We just got one of these for our Maker Space!
@AndreasSpiess
@AndreasSpiess 6 лет назад
Good!
@shadetreehandyman
@shadetreehandyman 6 лет назад
Great work... I'll be checking out your other videos for sure.
@AndreasSpiess
@AndreasSpiess 6 лет назад
Welcome on the channel!
@denteeremelo7212
@denteeremelo7212 4 года назад
really amazing tutorial, congratulations and thank you very much!
@AndreasSpiess
@AndreasSpiess 4 года назад
Thank you for your nice words!
@guitarpicker7464
@guitarpicker7464 6 лет назад
Great video .. You should have included how to measure the antenna impedance using the NS1201SA. You can tune the radials by bending them at an angle and measuring the change in impedance at the specific frequency. You can also use the VNA to cut optimum length feed lines. Did I mention I love this tool too :-)
@AndreasSpiess
@AndreasSpiess 6 лет назад
You are right. But the video should not get too long and I always leave something to discover by ma viewers.
@rodericksibelius8472
@rodericksibelius8472 2 года назад
I was a Microwave Technician and took a 9 month Special class about antennas, learned all the basics, theory and use of the Smith Chart and went on to work to help build 4-18 Ghz microwave amplifiers here in Silicon Valley, there were a lot of tuning using the microcope, tuning is like black magic with a skill using those little gold chips and soldering / tacking them when the desired SWR was achieved. I would like to buy one of these... hahaha... I'd like to learn how to use this HIGH TECH DEVICE 'AWESOME'...
@AndreasSpiess
@AndreasSpiess 2 года назад
Maybe you watch my video about the NanoVNA. This is a more modern version (which also shows the Smith chart)
@thelement3363
@thelement3363 2 года назад
Excellent presentation. Thank you!
@AndreasSpiess
@AndreasSpiess 2 года назад
Glad you enjoyed it!
@pequeajim
@pequeajim 2 года назад
Thank you for this. Great presentation!
@AndreasSpiess
@AndreasSpiess 2 года назад
Glad it was helpful!
@GulfSouthGene
@GulfSouthGene 5 лет назад
Thanks, really enjoyed video, well done! I am 76 and a retired electrical engineer / technician. Never too-old to lean new technology!
@AndreasSpiess
@AndreasSpiess 5 лет назад
You are right! I have a few viewers at your age. So our profession seems to be healthy for the brains ;-)
@marklowe7431
@marklowe7431 4 года назад
Brilliant video. Thank you Andreas.
@AndreasSpiess
@AndreasSpiess 4 года назад
Glad you enjoyed it!
@bobcongleton9220
@bobcongleton9220 2 года назад
Very educational, and well done, Fine presentation...Thank you...
@AndreasSpiess
@AndreasSpiess 2 года назад
:-) Did you see my other videos about this topic?
@KeithPhillipsSkyWriter
@KeithPhillipsSkyWriter 4 года назад
Enjoyed your video. Very informative and entertaining. Thanks!
@AndreasSpiess
@AndreasSpiess 4 года назад
Glad you enjoyed it!
@willofirony
@willofirony 6 лет назад
An awesome video, Andreas. You have demystified the dark arts of antenna tuning. Northshorepx says it all and I support all he says.
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you!
@LawpickingLocksmith
@LawpickingLocksmith 5 лет назад
Today I got my Nano Vna and Joe Smith mentions you in his video!
@AndreasSpiess
@AndreasSpiess 4 года назад
VNAs are great! Enjoy.
@thorbennielsen3845
@thorbennielsen3845 6 лет назад
Again, a Very good and interesting video. Thanks!
@AndreasSpiess
@AndreasSpiess 6 лет назад
You are welcome!
@Tchipo100
@Tchipo100 3 года назад
Again a nice 'Swiss tube' tnx Andreas 73 de Germain, ON4SG !
@robinkumar9086
@robinkumar9086 3 года назад
Thank you sir for such an informative video
@AndreasSpiess
@AndreasSpiess 3 года назад
You are welcome! Maybe you check my newer videos about the topic?
@TMS5100
@TMS5100 6 лет назад
Nice timing. I ordered one a few days ago already 😁
@AndreasSpiess
@AndreasSpiess 6 лет назад
Enjoy!
@TMS5100
@TMS5100 6 лет назад
i compared it with some expensive analyzers. it seems quite accurate. really interesting for such a price.
@charlesemehel2449
@charlesemehel2449 3 года назад
Thanks a lot Professor Spiess! :))
@AndreasSpiess
@AndreasSpiess 3 года назад
You are welcome!
@RobinsTools
@RobinsTools 6 лет назад
Fantastic Tutorial! Thank you Andreas :)
@AndreasSpiess
@AndreasSpiess 6 лет назад
You are welcome!
@RicardoRodriguesPT
@RicardoRodriguesPT 6 лет назад
Very good! Excellent work.
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you!
@Stingmni
@Stingmni 2 года назад
Great teacher. Thanks much!
@AndreasSpiess
@AndreasSpiess 2 года назад
You are welcome! Maybe you also watch my newer video on the nanoVNA? (if not already done).
@PhilipHubbe
@PhilipHubbe Год назад
Great to the point tutorial for people who know nothing about smith charts
@AndreasSpiess
@AndreasSpiess Год назад
Thank you!
@AbcDef-hl2ic
@AbcDef-hl2ic 6 лет назад
Great video as usual!
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thanks!
@eddyfontaineyoutu100
@eddyfontaineyoutu100 6 лет назад
Thank you Andreas ! 👍👍 RF has always been "black magic" to me ...☹️ I wich i had your knowledge about antennas !
@AndreasSpiess
@AndreasSpiess 6 лет назад
You are welcome!
5 лет назад
Yes, you mentioned already that you loved it :)
@AndreasSpiess
@AndreasSpiess 5 лет назад
:-)
@tsxownz
@tsxownz 6 лет назад
thanks a lot Andreas, this video was awesome. please consider doing a video on cables and connectors like SMA, RP-SMA?
@AndreasSpiess
@AndreasSpiess 6 лет назад
This was the last antenna video for a while. I have many other topics waiting...
@northshorepx
@northshorepx 6 лет назад
OH WOW, THANK YOU! !!!. This is one of your best videos to date. Antennae theory and practice is something that most of electronics hobbyists have to always rely on others, such as vendors and manufacturers, when we build with RF modules such as Lora etc. Using this video the theory and practice is now approachable. - IN A COLOUR GRAPH!!!! You have really showed us how we can optimise our own antennae using tools that even we hobbyists can consider getting. Thank you again! One question please Andreas, please could tell us if this device can be used for wifi/ES32/ESP82xx, GSM and other similar modules that all play with. I know you said that the 2.2 GHz band is covered, but is it just as effective in that range? Sorry if I missed this the video but it wasn't clear to me. Ps. The other thing that wasn't clear was whether you loved this new tool? :-)
@AndreasSpiess
@AndreasSpiess 6 лет назад
Concerning 2.4 GHz: We did not focus on that range so I cannot tell you if the results are as good as they were below 1 GHz. But I assume they are ok, too. I saw a video somewhere where the guy used it for WiFi antenna testing.
@helnatinty7631
@helnatinty7631 5 лет назад
northshorepx p
@tirexutus
@tirexutus 5 лет назад
@@AndreasSpiess Hello Andreas, Do you have experience with the management of Rigexpert? I have the AA-600, but it remains at 600mhz maximum. I was looking at several models, which at least could analyze the 2.4-2.5Ghz band, for wifi antennas, and have appeared yours N1201A, the Vna Tiny and another one that is much more expensive, the KC901V, which comes to cover the wifi antennas of double band. I would like to know if the measurements of the N1201A are quite accurate, since I would like to use it to make high sensitivity Bluetooth antennas. Thanks for your mythical tutorials. I wait your answer. Best regards from Barcelona, Catalonia.
@parrotgenie5099
@parrotgenie5099 5 лет назад
Being a engineer this is a great video, love that tool as well for something simple and portable when I don't want to drag out the analyzer and extension cord.
@AndreasSpiess
@AndreasSpiess 5 лет назад
Many of my viewers bought one and I got quite good feedback about it.
@soulrobotics
@soulrobotics 4 года назад
Andreas, the length of the coax is also important. Perhaps you can make a video on how, some time is better to put the amplifier also with the antenna on the roof.. .. And measure the comparison on power reflected.
@omareps5849
@omareps5849 6 лет назад
Thank you...this is NEED TO KNOW info!
@AndreasSpiess
@AndreasSpiess 6 лет назад
:-)
@hoggif
@hoggif 4 года назад
I find the N1201SA analyzer very usefull. I have one. I would recommend it too. I would prefer a good spectrum analyzer with larger bandwidth but I cannot justify the cost.
@AndreasSpiess
@AndreasSpiess 4 года назад
These devices are still quite expensive. I only bought one because it was a long-time dream...
@shazam6274
@shazam6274 6 лет назад
Very good for a digital guy! Congrats.
@AndreasSpiess
@AndreasSpiess 6 лет назад
:-)
@avejst
@avejst 6 лет назад
Wow, a wery god explanation Thanks for sharing 😀👍
@AndreasSpiess
@AndreasSpiess 6 лет назад
:-)
@ovejo9240
@ovejo9240 6 лет назад
Great video. Good work!
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you!
@jumadhaheri
@jumadhaheri 6 лет назад
Great information. Thank you
@AndreasSpiess
@AndreasSpiess 6 лет назад
You are welcome!
@ReflectingMe2024
@ReflectingMe2024 6 лет назад
So Andreas, I was wondering, do you like the N1201SA Vector Network Analyser. Couldn't quite tell... 😜 Excellent video, sir.
@AndreasSpiess
@AndreasSpiess 6 лет назад
I wanted to leave everybody uncertain about that fact. Glad I succeeded ;-)
@Conservator.
@Conservator. 6 лет назад
John Burns Exactly my thoughts! 😂
@vimmeh
@vimmeh 4 года назад
Hi Andreas, this is a great video, I'm new to VNA's and this was very interesting and easy to watch. I love your humour, please keep it up, 73 Colin, G7KDM
@AndreasSpiess
@AndreasSpiess 4 года назад
Thank you for your nice words!
@elioalcala4371
@elioalcala4371 3 года назад
Herr Professor!
@robinkumar9086
@robinkumar9086 4 года назад
Great video
@AndreasSpiess
@AndreasSpiess 4 года назад
Thank you!
@ariarokoski6449
@ariarokoski6449 5 лет назад
After watching this video I ordered the N1202SA. And Sir, You were right, it is a great tool! I have tried to find an adapter that could be used to measure the IPX connector small antennas. Can You give some tips where to find adapter that makes it possible to test antennas having u.fl and IPX female connector? You are doing excellent job helping people to get in to electronics. Oh, and did I already mention that I love Your videos ;-)
@AndreasSpiess
@AndreasSpiess 5 лет назад
You find them on Aliexpress (IPX SMA adapter). I ordered 2 different and one was not good. But I do no more know which one was which :-(
@davidgmos
@davidgmos 6 лет назад
Great video!
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you!
@bryanethier1910
@bryanethier1910 4 года назад
Another most interesting vid.
@AndreasSpiess
@AndreasSpiess 4 года назад
Thank you!
@johnwhitmore2531
@johnwhitmore2531 6 лет назад
Thank you, very useful info on Antennas. I'd love to learn what are the things to be considered if you soldered a LoRa module to a PCB. So then routing a track from LoRa module to the antenna. I'd imagine you could make quite a mess.
@AndreasSpiess
@AndreasSpiess 6 лет назад
Keep the distance between the module and the antenna short... Maybe you google about the dimensioning of transfer lines on PCBs.
@folkertbleichrodt5622
@folkertbleichrodt5622 5 лет назад
Andreas, thanks for the great video. I think it would be a nice idea to set up a website where the performance, or resonating frequency of these antennas is documented. These VNA tools are still quite expensive for the regular maker, also because you usually have to pay custom fees for more expensive items. Maybe a simple public Google sheets will work for this, or a Google sites website?
@AndreasSpiess
@AndreasSpiess 5 лет назад
You never know if our dealers change their suppliers. I can only test what I have on my bench.
@jobliss3932
@jobliss3932 2 года назад
Sometimes there are maker spaces that have all the fancy equipment. Maybe build your antenna and take it there! :) Then everyone shares all the equipment. I hear some places even have the thing that goes bleep! ;)
@rdruziani
@rdruziani 4 года назад
Very nice vídeo!! thank you for the informations!
@AndreasSpiess
@AndreasSpiess 4 года назад
Glad you enjoyed it!
@VideoDotGoogleDotCom
@VideoDotGoogleDotCom 6 лет назад
Thank you so much.
@AndreasSpiess
@AndreasSpiess 6 лет назад
You are welcome!
@R73CH
@R73CH 6 лет назад
I see that you are very close to explaining the Smith chart and it's usefullness :-) But it would be hard without complex impedance :-) Very nice video!
@AndreasSpiess
@AndreasSpiess 6 лет назад
This is why I shortened the video. First, it was in. But too complicated...
@romanopinto5172
@romanopinto5172 Год назад
Thank You🙏👌👍
@AndreasSpiess
@AndreasSpiess Год назад
You are welcome!
@chrisw1462
@chrisw1462 5 лет назад
Please note that, for low power transmitters, it's often worthwhile to design it to attach directly to the antenna. This removes coaxial cable losses totally. If you need to get data some distance to the transmitter, a data cable is much cheaper than coax at any length.
@AndreasSpiess
@AndreasSpiess 5 лет назад
I completely agree, especially for high frequencies.
@AlamoCityCello
@AlamoCityCello 6 лет назад
Cool Video! BRAVO!!
@AndreasSpiess
@AndreasSpiess 6 лет назад
Thank you!
@anullhandle
@anullhandle 6 лет назад
Again another useful and interesting video. So..do we get treated to the mini vna review next Sunday? :)
@AndreasSpiess
@AndreasSpiess 6 лет назад
No. This is the last video about antennas for a while. I have other topics waiting...
@RobSummers993
@RobSummers993 6 лет назад
Andreas Spiess For President 2020 "Make America Smart Again!" 😂
@AltMarc
@AltMarc 6 лет назад
I'm all in, for exporting our neutral policy, see my name...
@AndreasSpiess
@AndreasSpiess 6 лет назад
:-))
@thearchibaldtuttle
@thearchibaldtuttle 4 года назад
Nope, we need him ourselves!
Далее
Каха и суп
00:39
Просмотров 3,2 млн
#313 Useful? Cheap Spectrum Analyzer LTDZ 35-4400M
21:26
Groundplane Antenna for Meshtastic
19:30
Просмотров 7 тыс.
Why is Coax 50 Ohms? (#340)
19:57
Просмотров 511 тыс.
#291 External antennas and ESP32 Long-Range mode
13:57
Просмотров 216 тыс.
899$ vs 360$ which one will you choose ? #iphone #poco
0:18