Тёмный

1953 Allis Chalmers B PTO Disassembly & Inspection 

JPN76
Подписаться 1,5 тыс.
Просмотров 2,6 тыс.
50% 1

Disassembly and inpection of the PTO gearbox.
This tractor was purchased by my father in the early 80s. I grew up on this tractor working on 12 acres, mostly mowing but occasionally other projects. It was also the first vehicle I ever drove with a clutch and more than one cylinder. It has been sitting under a tin roof under the shade of oak trees since the mid 90s. (Ran When Parked) In north central Florida this is not a good thing. Thanks to cool nights and humid days with no sun on the tractor the iron would cool overnight and then moisture condensate on it with no way to dry until late in the day. This thing seemed like it was always wet. I bought a parts tractor that has been out in the weather all that time with much less rust but due to sentimental value I want to primarily use parts off this tractor where I can even if it involves more work.

Наука

Опубликовано:

 

1 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 25   
@jdjeep46
@jdjeep46 Год назад
Great video. Where can I get a belt pulley like that.
@JPN76
@JPN76 Год назад
I've seen a few for sale on ebay. Mine came with it.
@JPN76
@JPN76 Год назад
Just one example. www.ebay.com/itm/304520721995?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=peT_7-BISqO&sssrc=2349624&ssuid=hFycDPeESZa&var=&widget_ver=artemis&media=COPY
@jdjeep46
@jdjeep46 Год назад
Thank you
@donvoll2580
@donvoll2580 3 года назад
Good day from Ont Canada, Whenon farm we had a little B. 2 questions Hydraulic oil was that rear end oil< I didn't see separate compartment? & rear seal on pto shaft, you said it was wore, does that mean it done alot of pto work? Interesting video. Thanks
@JPN76
@JPN76 3 года назад
Yes the Hydraulics use the transmission oil. I believe the manual calls for 30w motor oil. You can use most oils that are designed for trans/Hydraulic there are a few out there and most are 30w. We actually used gear oil but didn't know better at the time. It had gear oil in it when I drained it. As far as the worn seal, yes it had lots of PTO work. The parts tractor that shaft came off of had a belly mower attached so most likely the pto was on most of the time the tractor was used.
@donvoll2580
@donvoll2580 3 года назад
@@JPN76 So rear end oil was #30. But I thought later if you wanted you to use hydr I guess pto would be going anyways. Thanks
@seniorelectrician6831
@seniorelectrician6831 2 года назад
Would be better on the bearings as wells housing and gears if a press was used?
@JPN76
@JPN76 2 года назад
Yeah, anytime you can go slow and steady it is better than pounding on it. It did move easily though. Although even the factory manual says to drive it out this way.
@ronaldwells1805
@ronaldwells1805 2 года назад
I like this channel
@JPN76
@JPN76 2 года назад
More to come. Just ordered the last of my tractor parts needed. I'm hoping to get more vids out there soon. Getting tied up with work lately.
@rodneyaman4272
@rodneyaman4272 3 года назад
Which service/shop manual have you found to be the most useful for your restoration?
@JPN76
@JPN76 3 года назад
The one that covers a few models B C G WD etc. It's online for free. I bought the B/C manual and it didn't have as much info.
@rodneyaman4272
@rodneyaman4272 2 года назад
I was wondering about the belt pulley oil seal. It looks like it can be replaced without removing the shaft. Am I correct?
@JPN76
@JPN76 2 года назад
Yes it can. Just remove pulley
@rodneyaman4272
@rodneyaman4272 2 года назад
@@JPN76 Thanks for the quick reply! Your videos very informative.
@JPN76
@JPN76 2 года назад
Thanks! BTW I measured all the shafts and bores to compile a list of seal numbers locally available. If you are interested I'm going with National seal number 450444 Shaft 1.375" bore 2.502" and width .5" this one was in stock at autozone. I bought every seal from the bellhousing back for about $85.00
@rodneyaman4272
@rodneyaman4272 2 года назад
@@JPN76 Thank you very much!
@rodneyaman4272
@rodneyaman4272 2 года назад
Do you also have a seal reference for the PTO shaft? I’ve already changed my inner, upper final drive seals.
Далее
1948 Allis Chalmers Dealer Movie Up Front Model G
10:11
Allis Chalmers B PTO Assembly
1:04:16
Просмотров 2,4 тыс.
▼ КАПИТАН НАШЁЛ НЕФТЬ В 🍑
33:40
Просмотров 473 тыс.
What Is Reality?
2:32:23
Просмотров 2,7 млн
1953 Allis Chalmers B Disassembly Timelapse
6:39
Просмотров 7 тыс.
1953 Allis Chalmers B Assembly & first fire!!!!!
33:16
Marvin Minsky
1:33:35
Просмотров 841 тыс.
Mac USB
0:59
Просмотров 25 млн
Скучнее iPhone еще не было!
10:48
Просмотров 603 тыс.