1963-72 Chevy & GMC Truck Air Ride / C10 Suspension / Air Bags Install 

Because of these helpful videos, I tend to look to Brothers for parts first.

That compressor in the cab has got to be lovely.

He is Definitely my go to for instruction... The vent windows kicked my butt...

Didn’t know enough about airbags to think I would install them myself. I do now!👍

Awesome stuff.. The fact that theres no fancy expensive tools involved makes it so much easy to relate

Very well explained with plenty of detail and “how-to” hints. Excellent video, thanks.

Great video. Getting ready to replace aged bags on my 1968 C10.

I love your videos I myself have a 66 fleetside c10 and restoring it. keep up the great content

Good informative video. I am working on getting mine together and this helped a bunch. Thank you...

Very well and clearly explained! Thanks for the video. I'll save it to watch again when I get my air bag kit 👍🏼

Excellent job installing air suspension and compressor on this Chevrolet C10 pick-up truck for increase payload capacity as well as towing capacity

One of the best detailed video I’ve ever watched, nice work!

You make the best videos dude. Thank you

another great job, thanks

Always a pleasure to watch Dave. David is a hard working fantastic instructor ! I’m not sure I want air bags, but, I enjoyed the in depth video.

Great video. You guys are the best..

Great video, thanks for sharing 😃

Great how to video, now to get my CFO (wife) to agree to purchase the kit ! Thanks Dave , I would have used that nice lift to do this job , if I had one available. Awesome that you demonstrate that this job can be done old school, on the floor!

Very nice kit I'll be ordering one.

Great video! Gracias!

This video was very helpful.

Awesome instruction 👍

Thanks.😊

32:37 did he just call us dogs and ask us to subscribe!😂😂

I'm hooked I subscribed.

@6:32 truck needs lower control bushings, look at how the lower control arm moved/shifted when spring tensions was relieved. Good video excellent explanation on everything. Hope one day i have the funds to do a kit like this on my late daughters truck.

Good video.

Perfect video had So much helpful information , from saftey to helpful drilling tips to very excellent job on explaining installation to being on ground like most of us man thank you very MUCH and yes im a subscriber 👌👍👍👍 (will this work on c20 )

New subscriber!!! 🔥🔥🔥🔥

I am down, on the ground, like a DOG 😂

Good video next time show us how the system runs where we can see the whole truck go up and down

Restoring my childhood farm truck, a 1967 C10 long bed. I like to place a full sheet of $80 plywood in the back, close the tail and nurse my presses cargo home. I am very happy with my new stock 1/2 ton brothers rear springs and heavy shocks but getting to the front. Modified to tandem brake master & dual diaphragm booster the works perfect, I was curious if a guy who has now plans to up & down 16 times a day (unless wife say otherwise) can a guy tee these front bags together and just air them up, test drive, find a sweet spot and leave alone? I like things simple, reliable and by design, longevity. Even soaping the fittings and use liquid PTFE thread sealant correctly. Good point on the grommets for lines. I have seen hundreds of truck amps w/welding cable over a doors weather strip. Way too my wrong. Scotch Locks & loud radios sell parts! I am done fixing vehicles on flat rate. Yeah! ASE Master - Retired

Great video, so to completely install this you need the air management and the suspension kit?

Great video. Do you have any on steering column rebuild?

So how do I lift the front or rear of a 64 3/4 ton . I plan on hauling a heavy horse trailer and trying to keep it stock with just a little bit of altitude. Would like it if most people couldn't notice it . Thanks . More videos ! Appreciate all your help

Great video. Very educational and very detailed. Great job. 👍 I want air bags on my 2014 Chevy Cruze. Where can I purchase the air system and who can install it? Thank you. Stay safe.

Can you do a video for your 73-87 4 - link air ride kit for those with a square body? There isn't any on RU-vid. Would be so helpful.

So how do you mount the rear bottom mounting plate? Does the bottom of the bag have a center 1/2” unc hole? Does brothers sell just the bags? Do the bags differ from front & back?

Will this adjustable track arm (in description) work for my 1970 C20 or do I have to get the deluxe track arm kit from the website?

Love your videos! Would this set up fit on a 87 suburban?

If I have a front cross member that seats the top of an airbag instead of bolting the plate to the upper control arm, are the top of these bags capable of mounting there without the plates instead?

Great video,,,,but how would this we work with rear leaf springs 73-87

Any ideas on doing this to a 75 C20 and 68 C30. Not really to lower, just wanting a smoother ride. Thinking on removing some of the rear leafs but getting heavy duty capacity back with air bags. Thanks

I ordered the complete suspension kit and the air management kit, I have a 1964 step side with the short bed, should I also get the adjustable rear track arm that you sell? Also would this even fit my truck as I see that it is listed as being made for 1965-1972 trucks. Thank you guys .

How does airbag ride quality compare to the trucks conventional coils and shocks ?

Is there 1 pressure for the front and another pressure gauge for the rear?? Or 1 gauge for all in this kit

Do you have a video on how to install front shock relocater kit?

Does the complete kit come with lines & the compressor or do I need to buy that separately

I ordered the 2 kits needed and I have completed the rear bags. The video is great! But I did not receive the written instruction or the nuts and bolts hardware that attaches the pieces to the airbags.

With my bagged longbed up on a 4-point lift is there a problem with the bags stretched out and hanging unsupported ?

Wish i could use this kit on my 60 fleetside... do you have a kit to replace front torshin bars suspension

Can the factory ride height be achieved if this kit is installed on a stock non lowered c10-c20?

In the end of the video is the truck as low as it gets? On the website it says it goes all the way to a 7/8 drop, if so does the gas tank have good clearance,thanks

What size jack stands do I need for a 1968 C10? Are 3 ton stands good enough?

in the back it doesn't need the leaf springs anymore for a 1986 chevrolet pick up?

Can you do a video with your 73-87 stuff? All these trucks with trailing arms have videos, but so few on the squares!

I have a 1972 c20 3/4 ton how do I do this with rear leaf springs? And thanks for all the videos you do.. very helpful.

When the bags are fully inflated how much lower is it than stock.

I love this guy an the video l am building a 1985 c 20 l sure would Like a catalog l still need a lot of parts Chevy truck parts that is. Ha Ha the ad was to fast an l didn't get all of 800 number

So if youre replacing the coil springs with bags, are they good enough to be used daily?

How much air pressure in those bags if you have a full factory load limit ?

Hi will this awesome Air ride set up work for a 1966 Chevy C 10 pick up truck? Thanks

Is the plate needed for reasons other than a place to mount your bag? I feel like you could make small bag mount and weld it up inside the pocket for more of a drop. Am I missing something? I ordered the kit for the rear and got it installed no problem. Just wondered why the plate was needed.

To What number on the relay does that wire coming from the pressure pump switch go too ? I understand the other red wire from the pressure pump switch goes to the dash controller and the other wire goes to the relay but you don’t say to what number on the relay thanks again

Can you ship to Namibia? If so what will be the price for complete kit including shipping?i have 67 C10 short fleetside

In the link it says complete air ride but when i open it there is many things missing.

Is there a kit for the trucks with rear leaf springs?

What if just want lowered springs or coil over shocks do guys @ Brother Trucks know a specific brand .

Does Brothers offer that kit for any other year truck like my truck year 1952 GMC

Where can I buy this while kit

What brand air bags did you install?

So, watched this whole thing and you didn’t even show us the lift in action? How does the system look on this installation? Does-it look good going up and down? What the height look like? How does it look during operation with the small lines provided in the Brothers lift kit? I’m left wondering what it’s final result is actually..? Looks like it will be a good kit, dunno really, wanted to “see” it work after my investment in time… Oh, well, looks like a nice enough kit..?😊

@BROTHERS Truck parts will this work for the c20's?

Does the rear air bags fit with a under the bed gas tank

Hola buenas tardes, me interesa comprar el kit de las bolsas de aire para una pick up Chevrolet C10 año 1965, soy de Veracruz, México y me gustaría saber si pueden enviarme el kit, cuánto cuesta y la forma de pago y envío a Veracruz, México, pendiente!!!

Same for the vans?? I have a 74 i want to bag

How much more trouble is it to do a truck with leaf springs?

Will you guys be making a video on how to do it to a 62 c10

Are you guys still offering these kits?

Can u up grade the control arms

Is this all one kit or it is made up of multiple kits?

What size wheels are on that truck?

I was trying to purchase items ro your shop and i was told youcan't ship to Namibia

How do you install your emergency hand brake??

What size tires and wheels on that stepside? Drop spindles?

Did I miss the part where the truck goes up and down?

does it work for a 1986 chevrolet?

you didnt have to weld or bolt in the bottom control arm bag pocket?

Great tutorial, but I have never understood why people want to use air bags, more leak points, the controls, air pump and tank, just too many possible failure points. But that's just my opinion.

Have you done a c10 1965

Did you have to C notch for the rear bags?

Do you have a diagram on paper

I guess doesn't work if you got leaves suspension in the rear 1975

"And their not a lot of time and trouble to install". Oh yeah, try doing any other truck outside a Chevy.

This video was very helpful.