1968 Ford Mustang California Special (GT/CS) LED Sequential Turn Signal Kit Unbox and Install 

You're welcome! Thank you for the compliment! 😎✌🏻

Thanks, My Friend!!!😁🤜🏻🤛🏻

You're welcome my friend!

Thanks! Good question. No, the brake lights just come on solid right away.

They've been fine so far. But honestly, I've driven this car less than 1,000 in the last three years and it never sees any rain. If I were to drive it more and expose it to the elements more, it might be a different story.

Thank you!😄

Should have said Shucks.

@@Areyousayingidontknowmyname I should've! That was a missed opportunity. My sister and I were just talking about trying to bring back some of the lingo from Leave it to Beaver. Haha Gee whiz! 😆

@@CousinRyan Oh Wowzer. I can't help myself. I am not even American and i love to chuck around a good piece of corny old school lingo. Ill even through in some old English when needed. Thanks to the TV Show Black Adder. Between that and bursting into song. HAHA

No sequential with the brakes. They just evenly get brighter when the brakes are applied. Much brighter than the standard incandescent bulbs.

I haven't had any trouble with it so far. But honestly, I don't drive it that much either... your left side works properly though?

@@CousinRyan I put the original relay back and now I have only the left side working.

@@Sureokay I've never gotten this deep into the wiring on my Mustang, so I'm kinda just throwing some stuff out here to you... when you turn right turn signal on, have you tried holding it in place? On my '59 Ford, the left turn signal works fine, but I have to hold the turn signal lever up to keep the right side turn signal activated. The turn signal switch is brand new, so I'm pretty sure the mechanism that activates it is just worn out and needs a little help. Not saying this is the problem with yours, but it is something easy to try to eliminate that variable. But you did mention the brake light not working either, so that probably eliminates what I just suggested anyway. Since you mentioned the brake light and turn signal not working, I'm curious if you also checked the front lights? Do the right front turn signal lights also not work? And just one more thing to consider when trouble shooting this, if you put the stock flasher back in and left the LED modules in the tail lights, there's a chance the turn signals won't work properly anyway. Generally LEDs won't draw enough current to activate the flasher. So if there is in fact a problem with your wiring, it might be helpful to put everything back (the original flasher and incoherent bulbs) and get it all working again, they try the swap with this LED kit. Do all of your tail lights work, both left and right side. Or is the right side completely dead?