1978 Honda CM185 Scrambler - Full Timelapse Build

Подписаться 192 тыс.

Просмотров 1,9 млн

50% 1

Does the thought of wiring a bike make you cringe? Is it holding you back from taking on a build? I used to be the same way. In fact, the first build I ever did sat in my garage for years because the wiring portion made me not want to even begin! Now that I've been doing this for a while, I've made a simple, easy to understand guide for how to wire your motorcycle from scratch, which can be seen @ www.patreon.com/DoctorMotorcycle
Current videos on Patreon Include
-How to Turbocharge your Vintage Motorcycle, Draw Through and Blow Through; A Complete Guide
-How to Wire your Motorcycle From Scratch, with No Experience
-How to Shorten and Modify Clutch And Throttle Cables
Watch me build this non-running CM into a trail worthy Scrambler/Enduro. The finished bike weighed in with gas at 275lbs, and the taller gearing and upgraded carburetor/open exhaust helped it reach a top speed of 80MPH (stock is about 58-59).
Parts List/Fluids/Tools I used (Amazon Affiliate links below)
Fluids/Oil/Cleaning Products
Fork Oil- amzn.to/3kIrGrM
Marvel Mystery Oil - amzn.to/2E4VGNP
Liquid wrench - amzn.to/345eN59 (Literally the best for Stuck Bolts)
Chain Wax - amzn.to/30VmARc (Used this for 10+ years)
Air Filter Oil - amzn.to/3fWdyaU (ONLY buy the "super tacky", use hot water/simple green to clean your filters, cleaners are a waste of money. Use simple green for the chain too)
Simple Green - amzn.to/2PT60Ln (This lasted me 2 Full builds, still not out)
Thread Locker - amzn.to/3iMfTad
Gasket Maker - amzn.to/2E7Or7v
Parts
Speedometer - amzn.to/3ouMd53
Handlebars- amzn.to/3fVAerD
Exhaust- amzn.to/3apz32s
Link pipes- amzn.to/3fTeSv2
Mirrors- amzn.to/2DS8VBu
Gas Tank- amzn.to/2E1ePAf
Clutch Lever - amzn.to/3fWNJr5
Electrical Connectors- amzn.to/2Q0lkFT
Fiberglass Mat- amzn.to/3aokfBo
Fiberglass Resin- amzn.to/3asDQAn
Carbon Fiber Wrap - amzn.to/2Y20dYa
Tools
Automatic Center Punch - amzn.to/2Y20rP0
Drill Bits - amzn.to/2E88NxO
Cordless Drill - amzn.to/3gXn4M4
120v Cutoff Wheel - amzn.to/3gXZvmx
Chain Breaker - amzn.to/2Fk4DmQ
Music Copyright-
Piano & Sax by Joakim Karud / joakimkarud
Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0
Free Download / Stream: bit.ly/piano-sax
Music promoted by Audio Library • Piano & Sax - Joakim K...

Опубликовано:

1 апр 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 664

@DoctorMotorcycle 4 года назад

*Edit 1-3-2021 The popularity of this video has surpassed even my wildest expectations. As of today, it's closing in on 500k views, which to some might not seem like much, but to me, is incredible! I wanted to give a big thanks to everyone that has shown support. I'm humbled and thankful for this opportunity to share my passion with you! -Jimmy There were many challenges during this build. I'd never used CAD in my life, never used a 3d printer, never done fiberglass, never edited a video and many more "first time" things. Trust me, there were many frustrating days of chasing issues. I had to completely redo the fiberglass work TWICE, the batttery box went through 3 different revisions, the jetting took multiple days etc. Just watch this knowing I'm not some wizard who breezed through this, I almost gave up in frustration more than once. I hope this video inspires people to keep pushing, keep challenging yourself. Thanks for watching, much more content to come!

@s.crambling3795 4 года назад

Watch GoldGuy if you haven't already. He leaves his mistakes IN and it adds to the pleasure. Better than polished TV that implies you're not as good.

@DoctorMotorcycle 4 года назад

@@s.crambling3795 Will do, I suspect I've probably already seen him. On build #002 I left the mistakes in, they're good for a laugh.

@mitchellpeasley9310 4 года назад

you are a wizard though, haha this is awesome.. I'm looking at the same bike right now and want to do similar things to it

@DoctorMotorcycle 4 года назад

@@mitchellpeasley9310 Thanks. The Doctor-Motorcycle website is almost ready to go live, and on It will be the CM185 battery box, among parts for other bikes as well. So if you do end up buying a CM185, and need a place to mount the electronics, we have you covered.

@maxpulham6825 4 года назад

Great video mate, thinking of doing something similar myself and am expecting a lot of trial and error as you mentioned above. How long would you say the build took from start to finish? Cheers

@CurtisTarwater 3 года назад

Well kiss my foot! Learned something new from your cable section. Use an old spoon as a crucible to melt the lead. Great hack!👍👏

@bretlagasse3560 3 года назад

I was thinking about doing this to my 79 CMT. I thought it was a crazy idea and now I'm seeing your video from over a year ago. Summer/winter project

@MarkHicks326 2 года назад

I had a CM 185 that I believe I bought for a couple of 100 bucks drove it for a summer and then sold it for double my money but you sure made it look like a bike well worth keeping...good job!

@s.crambling3795 4 года назад

Gobsmacked mate. I was completely amazed at the amount of work you could do with a few simple tools (3d printing aside). I would bid on your bike bar the fact I'm outta the country... Completely fascinated. Do more. Oh, and shout-out to Nan. She had me in stitches.

@DoctorMotorcycle 4 года назад

Thanks for the watch and nice words!

@rodneybaldwin9228 4 года назад

Currently doing a 82 cb125S they are pretty similar it's crazy. Amazing bike man. Basically everything is the same but the engine!

@benbeagle3045 Год назад

Who knew that the flash was into restoring motorbikes. Great work.

@stefansamland566 3 года назад

Hello ! At this Bike i Made my driving licens in 1980 ! Never thougt that it Could BE such a cool Bike ! ! Thank you for this Video ! Greetings from Lüneburg in Germany !

@RealSuburbanCowboy 4 года назад

I am so glad you soldered those connections. I see so many people use the crimp on connectors without solder. I don't expect their connections to last all too long.

@nathanielpea5819 3 года назад

To solder requires flux in one format or another, which eventually corrodes metal over time. Bullet point connectors well fitted are genuinely a better option.

@benhayden9269 4 года назад

this is the best twinstar build I've seen. I've been restoring mine for about a year and this inspires me to take it even further.

@benhayden9269 4 года назад

do you have a place where we can the cad files and other build files used in the video?

@DoctorMotorcycle 4 года назад

@@benhayden9269 No, I just sell the battery box on my website. I might consider selling the STL files. IDK let me think about it.

@benhayden9269 4 года назад

DoctorMotorcycle would be very cool to have those sort of things availible to the modding community

@edwardweiszbeck1649 Год назад

Wow you’re such an ingenious guy. You e figured out a home made remedy for every job you need to do in a restoration without needing high tech expensive shop equipment. Two thumbs up for that alone. Your bikes turn out very nice

@tonykartracer8032 3 года назад

Good job, buddy. I can't even get off my ass to lube the chain on my bike...... so I give you folks a lot of credit for doing what you guys do.

@RealSuburbanCowboy 4 года назад

That is probably as cool as a CM 185 could ever be! I love this!

@DoctorMotorcycle 4 года назад

Thanks man glad you like it. Seems like 95% of people love it and 5% of people hate it lol.

@redtobertshateshandles 2 года назад

They were an ugly bike.

@JustMike2791 3 года назад

I know you're proud of your work and rightly so. Nice build. I enjoyed the video very much and I wish you continued attainment of knowledge and enjoyment from your passion. Be well.

@DoctorMotorcycle 3 года назад

Thanks, will do!

@eddyraye5825 3 года назад

I have no problem calling you doctor. Sweet build. This is what you call attention to detail. Don't know if you started the Yamaha 650 build yet, but I'm going to look for it right now. I always liked the Yamaha 650. It had the classic British look that I like so much.

@peterodonnell3312 3 года назад

I get full satisfaction watching you rebuild these motorcycles ,I'm a fan of enduro sports ,cafe Racers,and brat builds.you are very professional at what you do.my favourite motorbike is the 1981 Yamaha XT 250 or 350.the one Rambo ride's in First blood.i would like to see you Dr motorcycle up grade one of those.thank you for your hard work ,you are true artist.

@mattf1229 4 года назад

These are such cool little bikes anyway and to make a scrambler out of it is even better. I had one of these, the 200cc version. I rode it everywhere on and offroad with zero issues.

@DoctorMotorcycle 4 года назад

For sure man. They're pretty light for being twin cylinder bikes as well. Just the lack of power and the 185's being a 4 speed kind of sucks. It would barely do 30mph in deep sand. I'll do another one day, and swap in a cm250 motor and hop it up a bit. Really didn't want to sell this bike but the next build needed the funds.

@mattf1229 4 года назад

@@DoctorMotorcycleyeah, it's not a huge engine anyway. I always wondered about a few key mods with one though. Advance that timing a little, dual carb and some porting polishing. I love the exhaust on that, so cool.

@ronh8717 4 года назад

This is so sick. Mad props.

@patrickdowling452 2 года назад

You are an absolute hero. This is great, cheers! much inspiration for my rebuild now hahaha, thanks!

@jimhenry9936 2 года назад

I love these old Honda's I bought a 350 XL in 74' and another one in 76' They were awesome bikes.

@ebagmaiyup7436 2 года назад

I really appreciate your videos, cause I build bikes in the same environment, same style and attention to detail. I'm dying to get a motorcycle table, definitely save myself some back pain haha

@johnnyvargas1074 2 года назад

This reminded me as well when I did my '73 CB350 from all original to a cafe racer. I can't wait to have the time to do another project...

@Night_Spirit_workshop 3 года назад

Cool! I like u showed everything in details!

@ronin99999 2 года назад

Fantastic job, a labour of love

@andyquinanola1793 2 года назад

Hi Doc, your video helps me a lot...Thank you..Big Fan here from the Philippines!

@TheGorillafoot 2 года назад

It's sick. I love the simplicity.

@johnnyb7497 3 года назад

good shit brotha! rarely see anyone actually use a electrolysis rust removal system

@hammer5475 3 года назад

Great job, you made that bike really cool!

@bassmith448bassist5 2 года назад

I do similar work in Florida. Like your Desert Rat style. Good build skills and attention to detail.

@austintshepard8958 3 года назад

Awesome job! Lot of hard work went into that.

@DoctorMotorcycle 3 года назад

Thanks Austin.

@juanjolucenadiaz7027 2 года назад

Desde España. Unos vídeos geniales! Un trabajo genial! Maravilloso recuperar esas motos y dejarlas tan bonitas!

@BanjoLuke1 3 года назад

Wow.... What a great place to start a build and a fabulous place to finish it. This is (in UK market terms) the baby sibling of the CB/CD 200 motor.... Not a promising start point and what looked like a bike not in great health. I take my hat off to you. It looks like a lot of fun to ride and you have brought a dead or dying machine back to life.... Chapeau!

@markkauder1288 Год назад

Great Job, Jim.

@Roquefort88 4 года назад

I liked the fiberglass part. Gonne use it on my next build. Great job.

@DoctorMotorcycle 4 года назад

Thanks!

@ethanbonnet8719 2 года назад

Satisfying to watch^ thank's for video!

@Deneteus Год назад

I just picked up a CM200T with a CM185 engine and I was looking for wiring videos. Thanks for posting this. My wiring is rats nest level and needs to be redone from scratch. It has so many splices you can tell someone wasn't paying attention at all.

@JohnKentSV 2 года назад

Just one word, Wonderful!

@r1richie 2 года назад

Super build turned out great.

@adangonzalez2856 Год назад

Great work keep doing it THANKS

@Stevo736 3 года назад

Another great build you certainly know your stuff. The Suzuki GS400 Turbo sort of led me here.

@donaldfranklin5391 3 года назад

Very awesome video and restoration

@newman1971 4 года назад

This is absolutely brilliant mate! And a big help! Bike looks mint 👌

@DoctorMotorcycle 4 года назад

Thanks Craig, comments like yours are what keeps me going.

@newman1971 4 года назад

DoctorMotorcycle no worries mate, top work!

@greenbasterd9112 3 года назад

Sounds and looks awesome good job

@OngezoutenMening 5 месяцев назад

very clean build

@robleach1335 9 месяцев назад

Nice job!

@jukeboxhero1649 3 года назад

That's a tough boy ride. I could get so much poontang with that little Pitbull of a bike. You got.the coolest bikes, man!

@DoctorMotorcycle 3 года назад

Thanks 👍

@repetitivemotion 2 года назад

Dude, that was awesome and inspiring. I have three bikes but I’d like to do something different, something homemade but I couldn’t figure out what it would look like and then… this video pops up! Man this is it.

@repetitivemotion 2 года назад

@@noidontthinksolol who said I was going to copy it? It is the idea of a cafe racer/ scrambler that I was talking about.

@motouk439 4 года назад

Sounds amazing

@DoctorMotorcycle 4 года назад

Totally agree, glad you got to that part. Sounded even better in person, a joy to ride in the dirt. I appreciate the feedback

@CBCycles 3 года назад

Fantastic build! I really like that you went bold with the knobbie tires. For sanding ground wire areas try a Dremel speed clic abrasive wheel, really let’s you target small areas

@yveso7474 2 года назад

Good job!

@billynightmare 4 года назад

Dude you have mad skillz!

@DoctorMotorcycle 4 года назад

Thanks Pal.

@BaileysDad369 2 года назад

Another really cool build. Great video and nice editing! Keep em coming!

@emilianomolina882 4 года назад

Aguante system of a down! Impecable la moto saludos de argentina! 🇦🇷

@derryjones1029 3 года назад

I love this bike good job nailed it👍

@Maciste982 2 года назад

That´s a fucking beautiful project bro, congratulations, that´s beautiful!!!

@larrrevenga49 3 года назад

I don’t know why. but I can’t stop watching it . IDK if it’s just the noises 😂

@khaleda.7244 3 года назад

Shout out from Kuwait.... Brilliant Job!

@texasmanufacturing950 9 месяцев назад

Cool build and great T-shirt! (System of a Down!)

@darylhoffmann6328 3 года назад

Awesome bike!

@jackxish 2 года назад

Great video you've motivated me !

@marcosfugiwara3238 3 года назад

Parabéns,sua moto ficou muito linda, excelente customização.👏🏼👏🏼👏🏼👏🏼🇧🇷

@DoctorMotorcycle 3 года назад

Gracias Amigo!

@Panos.78 2 года назад

Excellent job 👍

@motodenn 3 года назад

I have the same bike! Such fun even stock!

@strikerone814 3 года назад

Love that work,very nicely done,Subscribed :)

@DoctorMotorcycle 3 года назад

Welcome aboard! Thanks for leaving a comment as well, every little bit helps.

@Tyler.i.81 2 года назад

Nice I liked the look very cool

@delhivlogs1223 3 года назад

Nice work 👌

@roybrookes9433 4 года назад

Well worth the 34.34 watch. I wish I had Your money and knowledge.

@DoctorMotorcycle 4 года назад

Thanks Roy!

@francilinos 3 года назад

m8 buy a cg 125 and you can do it for cheapppppp

@kyandkamsdad 3 года назад

That was awesome !!!

@dan665_ 4 года назад

I just got a 78' CM185T for free a few days ago. Now you're making me think of what I can do to it and I don't even have the title yet. It was kept inside since the 80's but was left out for a year recently so it needs work, but it runs and it only has 2k miles! I haven't driven it ye because the tire are shot (I think they're original, like everything on the bike) and I haven't cleaned the air filter or carb. I don't really know anything about bikes but I think this'll be a fun project to start and work on.

@DoctorMotorcycle 4 года назад

Do it man! The little CM's are fun bikes, especially since even stock they barely weigh 300lbs. Perfect candidate for a scrambler.

@2020rhal 3 года назад

Will you try following a damn train when it's done?

@dan665_ 3 года назад

@@2020rhal Ill try my damn best but I think it'll be too slow

@zaid-je5es 2 года назад

BEAUTIFUL

@indianscout1019 3 года назад

Obviously knows what he's doing! would have liked to have seen both mudguards sorted but helluva nice job mate!!

@DoctorMotorcycle 3 года назад

Thanks, looking back IDK why I didn't at least put a front guard on it, I do that on all my bikes now (the scramblers at least).

@AceCafeBikes 3 года назад

Good job, looks good, sounds good, on to the next!!! fun fun fun. 🙂🥰

@DoctorMotorcycle 3 года назад

Thanks. Your GS is coming along nicely!

@AceCafeBikes 3 года назад

@@DoctorMotorcycle Thank you, its coming, a little bit this and that and she'll be ready to ride again.

@VictorManuel-pf7se 4 года назад

Amazing what can be done with basic skills

@c.c.2679 4 года назад

Cool Video cool bike well done

@DoctorMotorcycle 4 года назад

Thanks 👍

@kennethwood713 2 года назад

I love the sound effects

@bloodbones7798 3 года назад

When I saw that System of a Down shirt I was like, HELL YEAH!!!!

@geraldgitau7702 3 года назад

Nice job

@aaronhernandez6838 3 года назад

I wish i had the skills this guy has

@badlarry172 3 года назад

🤘nice job 🇬🇧

@marcus34886 4 года назад

I watched you with pleasure my friend, you did a great job.

@DoctorMotorcycle 4 года назад

Thanks! Glad you enjoyed it.

@Gianfranco_69 2 года назад

Better looking than most new bikes....damn i am jealous,and i dont get jealous over anything

@mrkoo6288 3 года назад

Wow, what an amazing build/video, I’ve watched the whole thing and you are very talented! Thanks for sharing this man that’s awesome

@steveraus3495 3 года назад

I just love how you take boring, wimpy, commuter bikes and turn them into mean, nasty, sexy machines!

@JoeMama-vj8es 2 года назад

Wow I can't believe he did all that in just 30 minutes.

@EstebanGamboaDev 3 года назад

This is great work both on the bike and on youtube. Thanks for the effort and I hope you just keep growing.

@DoctorMotorcycle 3 года назад

Much appreciated!

@user-sw2lv3zp6o 3 года назад

Great bike. Well done.

@DoctorMotorcycle 3 года назад

Thanks! 👍

@fullfunk 3 года назад

its a nice build for sure only would make brown leather seat with foam rear light below mud cover and rear suspension higher

@noahway13 Год назад

( I'll might have some typo issues, bear with me) Wow. Amazing. I'm got a free 1982 cm250 rust buck I'm trying to on the on the road. Someone really did a hatchet job on it before to me. It did not run. Beggars can't be choosy. (I'm on disability because of a bike accident) I'm trying to add some back end. No plays for tags and lites-- no fender. I have the frame two pipes like you have 08:04 A piece of rebar it fits in the holes perfectly snug. I'm gonna try to pay someone help me bend some rebar so that it can slide in and out and lock with a clip, I'll make a longer one to carry carry luggage. Simple rebar with a an 180 bend. It is crazy how much my bike looks like you-- if you squint in the dark. Yours looks new, mine like Mad Max. I actually have my brak and turn signals mounted on top of seat rite now. Both my tires look like your front. Same colors. I have short pipes that no come up tho.