1980 Malibu Big Block

Подписаться 229

Просмотров 86 тыс.

50% 1

Here is a clearer video. You can see a bit more detail and there was also a bit more sun out today! And yes it is one of the 202 factory 4 speeds they made that year. But now it's fitted with a muncie M-21 with a 67 chevelle 12 bolt 3:31 posi. I know, I know I need a new gas tank. One thing at a time. I need to recover the front seats, put in the new headliner, and install my new carpet. After that I may take off the upper and lower A frames and powder coat them, of course at (Top Dog Powder Coating) and put in some new bushings. The rear end has UMI upper and lower control arms as well as the upper and lower connecting braces.

Опубликовано:

21 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии

@youtubegoogler200 4 года назад

Love the attention to detail. Super clean build!

@possiblycrazy442 13 лет назад

That's probably the best Malibu I've ever seen. Probably doesn't mean much coming from a 20 year old, but still, that's one very nice machine.

@Spudderr 5 лет назад

Love these stock look builds. Guy in my town has a 56 wagon with a 396 in it and if it weren't for the one small dent in the header by the steering box, you would swear gm made it that way lol

@Speedkills396 11 лет назад

The motor mounts you want to use are the stock small block ones. As for springs, those are the original small block springs in my car. The 202 production run is only for the 1980's. The 78 &79's had more 4 speeds made. Thanks for the compliments, my plan was to make a 1980 Z/16 as well and make people think it was real, and a lot of people ask if it came that way. Good luck with yours!!!

@shaddowcarter817 Год назад

Uhhh dude...I wanna drive that thang!

@hhplowinglandscaping9955 2 года назад

Absolutely Beautiful. I looking to put my 396 into my 80 Malibu without AC/HEATER Delete.

@pathbelow6652 5 лет назад

Nice and clean with factory look. Nice job.🚗

@Speedkills396 11 лет назад

All you have to do is a little research to find out that GM said they only made 202 malibu's in 1980 with the 4 speed option. This car came with a Saginaw 4 speed....I also have the build sheet that came with it. Both copies...the one under the seat and the one on top of the gas tank.

@Mchenrygames 7 лет назад

This really took me back to my childhood days.

@ratrodmiller 12 лет назад

very well done ,attention to details is awesome

@andrewerickson7962 10 лет назад

smooth and clean. just fantastic would like to drive that.

@moparpower975 10 лет назад

that ride is awesome ! i'm a moparian but i gotta say : this Malibu is beautiful and sounds amazing ! great job !

@DYNODONNY 11 лет назад

THANK U, THANK U, THANK U!!!!! I'm in the BEGINNING stages of buildin' my 1 of none, what if, phantom: "80.5 Malibu SS Z-16". The motor installation looks as if it was factory correct!!! If u don't mind me askin', what motor mounts did u use & what brand of front springs as well? I haven't found ANY sources for big block springs for 78-81 Malibu's!?!? .... & I "THINK" the total run of the 202 "B/W 4-speed T-10" Malibu's spanned from '78-'81?

@shaddowcarter817 Год назад

Yeah back in highschool a friend of mine had the '79 SS/396BB with a B&M gateshifter tranny,411rear end and I used to take him off the line in my '77 nova/'64 327/339 hp vette SB,M22 rockcrusher speed but by 2nd gear he would smoke that rubber and myself as well lol...good times...that is a clean and mean build my friend!

@Speedkills396 11 лет назад

Thanks....its a hydraulic roller...XHR 268 .510 lift roller rockers too. The motor is a 402 .030. It is out of an impala or caprice.

@AnDrEw122100 3 года назад

Nice car buddy , love the Malibu’s and all the g-bodies for that matter .

@michael1294 8 лет назад

Holy smokes dude...motor looks like it came from the factory that way. Nice job!

@5BobbyDavis 11 лет назад

Very nice little ride,good job on the build

@chevy79bu 11 лет назад

just looks all around clean man nice job

@mattrosenboom4810 5 лет назад

I remember around 1990 you could pick those up for $500 all day long. I should have bought every damn one I saw. Live and learn I guess. Love the car!

@TheRoguelement 12 лет назад

If I had a dime for everyone who told Me they wanted my 355 inch 78 Malibu wagon .I did basically what you did except I did a 9 inch rear with HPM upper and lower control arms and PST polygraphite bushings with KYB gas adjust and el camino springs ,Vette ralleys 15X8 rear 15X7 front from an early Monte, 700R4 with Fairbanks Street lock Gold torque converter and B&M converter control ..Handmade cross member with dual cut outs & custom shaft HD joints, HUGE difference with new front Control arms

@emrguns1 11 лет назад

I love Malibu's & really love your ride. Thanks.

@LargeCarTrucker 11 лет назад

Nice. I was thinking of putting a Tremec in mine because I want to romp on it without breaking the transmission and I got a Saginaw now. So the M-21 will hold up to it?

@ClassicGBodyGarage 11 лет назад

Love the detail! Perfect!

@emrguns1 11 лет назад

The motor looks really good, what is it out of & what camshaft are you using. Thanks.

@lostems 11 лет назад

good factor, I have a dana44 3:73 possi on mine. Does it really differ, being a g body and all?

@fullthrottleshift 11 лет назад

I have one of the 202 as well and am interested on how you got the shifter to come up in stock location? How is clutch linkage hooked up? and is ther any cooling problems. Gathering info before I dive in . Thanks Tim

@MrJohnnyDistortion 13 лет назад

Can you tell me about the blue steering column under the hood?Have you installed a bar between the frame rails at each end?It'll improve handling quite a bit.Very nice car.Ravelco anti theft.Check it out.

@chevy79bu 11 лет назад

love the paint on the bu...just dont see them painted like that enough. Is that the origional color? mine was origionaly a blue simular to that but was faded to hell now it sits in primer black

@LargeCarTrucker 11 лет назад

What kind of Transmission did you use on the BBC? I am putting an SBC in my 80 Malibu and everyone keeps telling me to cut up the floor and put in a Tremec TKO 600

@Speedkills396 12 лет назад

Thanks...yes it is a pump gas motor...but she gets some of the good stuff from time to time. The only suspension upgrades are....a 12 bolt rear end with UMI upper and lower control arms.

@Speedkills396 13 лет назад

It's actually a 396 but I used the stock 305 chevy mounts. The towers on the side of the block have to be for a passenger car and not a truck. But the small block mounts are the same as the big block ones. I actually went and bought new mounts for the ones that attach to the frame. And I powder coated the towers at my shop.

@Speedkills396 12 лет назад

It's a 402 .030 with a 268 roller cam and roller rockers, about 9.5:1 compression, stock ex. manifolds, al intake and a Q jet.

@diabel1969 11 лет назад

I am curious about a couple things though.. Are you running a saginaw in this car behind that big block? I can't see any other way to get the shfiter into the stock location with a muncie or b/w due to the reverse linkage being on the tailshaft, and the design of the shifter? My real question is the steering column? Did somebody fabricate that column for you, or is it possibly from an elcamino? They didn't make many with the tilt wheel and the key release. Thanks!

@austinoverholser3907 6 лет назад

Did you run into any problems with the clutch/shifter components and the big block?

@Speedkills396 12 лет назад

Thanks for the compliments!!

@Speedkills396 12 лет назад

If I remember correctly the block came out of a Caprice. We used it for several years in our 72 Camaro drag car.

@ChicagoDonny922 4 года назад

...I'm FINALLY getting mine situated after all of these years & adoring (QUITE OFTEN) at the videos of your "'80 LS-6" every since I came across this 7 years ago...SHE'LL FOREVER BE THE MUSE FOR MY "MADAME MAGGIE MAE SATURDAY" Z-16.

@TheRoguelement 12 лет назад

A well planned out well executed malibu ..The only limitations for them with big blocks is Stock hood Low rise intake ONLY .. No carb spacers No Hi rises and if you run Headers your limits are tube size if you want them in the frame and under the car ...I know I have owned a 482 inch wagon with TH350 and couldn't shut My stock hood . so I purchased the 3 1/2 inch cowl hood and My TeamG 850cfm fit fine. front ralleys were off a 74 Monte 15X7s until I could have them cut to 15X4s Nice car bud.

@Speedkills396 13 лет назад

if you are referring to the plastic cover, it's the color it is supposed to be. It's just a plastic cover that goes over the steering section.

@ericmavis7716 11 лет назад

what size tires are you running, and is the suspension stock ride height?

@LargeCarTrucker 11 лет назад

No way. Does it hold up to the power that the big block pushes if you romp on it much? I heard they don't hold up to much torque and horsepower. I'm still experimenting with the GM Manual Transmissions. Just need a little help is all :)

@Speedkills396 13 лет назад

Those aren't stock mufflers....they are mufflers that a friend loaned me until I could get some new exhaust on. They were on his 67 Camaro with a 468 BBC that was used to drag race. They have handled plenty of horsepower in the past. But I have another video that shows the new exhaust. Thanks for the compliment.

@wolfdemon389 12 лет назад

Haha this car is amazing! It's funny that your license plate says "Billy 3" because my name is William (Billy) and I am the Third (William E. B. III)! My dad and i just bought one of these this past weekend and it has a 229 v6 that we're swaping out with a 305 or 327 and putting a 12 bolt rear end in it! Hope to see more videos of this car if you don't mind!

@kevinthomas9060 10 лет назад

Sweet car! You've made it look like it came that way from the factory. Well, except the exhaust dumps. I'd love to see it with a pipe exiting behind each rear wheel. But that's just me. Two thumbs up!

@thomasholland3289 9 лет назад

BeautifulMid 60's Grandma Blue. Love it.

@Speedkills396 11 лет назад

Yes you should be fine....I also am running an 11" clutch and a lakewood bellhousing that we modified to fit the offset in the factory clutch arm location.

@Speedkills396 12 лет назад

It already has a hydraulic roller in her now. It even has roller rockers too, most people don't think so because it has the low profile valve covers.

@diabel1969 12 лет назад

I'm curious where your getting the 1 of 202 count from? I have a factory 78 with some options and the nearest breakdown i've ever heard was from the GM package I was able to get on my car back in the early 90's stating that GM produced 1200 manual shift G body cars per year but not breaking down any more than that between elky's, wagon's, 4 door/2 door, and monte's, or V6/3speed/V8/4speed. Looks as though tach and gauge package wasn't factory though in your car as it doesn't match. Clean Car!

@LittleDragon77 12 лет назад

Looking sharp and clean as a whistle as usual bro. Sounds fukkn sweet too. Nice vid.

@LargeCarTrucker 11 лет назад

Do you have to modify the Stock Z-Bar?

@MrLamontp 12 лет назад

big block and a four speed what fun love the car

@ChargerHemi29 13 лет назад

Your car looks really nice man, nice job.

@xyvc 13 лет назад

so clean...nice ride man

@Speedkills396 13 лет назад

No it is not for sale...When I do sell it I have quite a few people already that said they want to be called first. Thanks for the inquiry though!

@craigarvanites2217 9 лет назад

If Ya wanted to sell i would be interested what would Ya want for it? Any ideas yet lol it's been a while since my last comment

@TheKuntryboy15 12 лет назад

Love Da rallys on dis car...sound good! Pump gas motor? Stock suspension?

@Speedkills396 13 лет назад

Thanks DJ.....I should repost a new video....lots of new things done since that video was made!!!

@georgejohnson1124 11 лет назад

Very nice Sir............

@diabel1969 11 лет назад

continued.. sorry.. As stated, if the shifter is in the stock factory location, considering the shifter bolts up on the G body between the tailshaft and main housing, I can't figure out how your able to use the stock location unless your still running a saginaw, as the other tranny's mount the shifter on the end of the tailshaft with longer rods which would put the shifter between the seats more. If possible, could you just explain what you did to make the shifter work, thanks!

@CaptDesmo 11 лет назад

What length shifter are you using?

@jackiecurl6171 2 года назад

do you still have this Malibu

@MrSethza 10 лет назад

So clean, you could almost imagine gm making it this way if there was no oil crisis or emissions regulations in the 70's....

@lostems 11 лет назад

a gn sway bar fits perfectly, i have one on my malibu.

@TheKuntryboy15 12 лет назад

Clean as sht..dis malibus get more and.more harder to find..great drag cars!!!

@ruwithlee1970 11 лет назад

Very Nice car are you going to Install new sway bars in the car in time I got mine off a wecked GN, sticking to Granny stealth Good Idea! Haha!

@derekthegreat1114 4 года назад

I love that car!!!

@backyarddoall 13 лет назад

simply stunning - cttandy

@Timmy91000 10 лет назад

If you were to sell it what would you ask for it??

@gbodyrush 4 года назад

Sounds good

@Speedkills396 11 лет назад

Does your gn have a 12 bolt rear end?

@Speedkills396 11 лет назад

No I am not running a Saginaw....As stated before it's an M-21 four speed. It is a factory steering column. Factory manual floor shift column with the tilt option. It's all real. It is now, a big block, M-21 four speed car with a 12 bolt posi. None of that is factory but it is a real factory V-8 four speed car with tilt wheel, gauge package, F-41 suspension, and rear defrost!!

@mattrosenboom4810 5 лет назад

I love your car!

@markJohnson-ot7ny 7 лет назад

A nice old school ! M

@fadoola1636 4 года назад

Love it 😻

@Slackerjr92 12 лет назад

This car is beautiful!!!

@redman58fla 11 лет назад

@Jeff Carr thats a nice car and motor but it looks like w buick or pontiac big block from lookin at were ur headers go

@craigarvanites2217 11 лет назад

Can ya tell us about the car in greater detail

@DJ4000VOLT 13 лет назад

nice car man

@Speedkills396 11 лет назад

It is the same transmission GM used in all of their high performance cars though the late 60s. It holds up just fine. Alot of late 60's cars were rated at 375-400 hp....but were actaully putting out somewhere in the neighborhood of 500, with this same tranny.

@dennakarz6182 2 года назад

The only thing I don't like is the square signal lights beside the rounded headlights. And the bumpers stick out too far. But very nice to Malibu. Same as my mine. Yukon Territory Canada

@bh8922 2 года назад

It's all factory so you'll have to talk to GM about things you don't like

@craigarvanites2217 11 лет назад

Idk you tell me haha where is the car located btw

@Calbenmike 4 года назад

Talk about a sleeper car...wow.

@79383CaMarroW 12 лет назад

clean man

@Speedkills396 11 лет назад

Yes I plan on putting a rear sway bar on it...but the GN sway bar wont fit this car.

@Speedkills396 11 лет назад

It is a muncie M 21 4 speed.

@realeyesrealizereallies7134 7 лет назад

looks like it was just restored!

@ynot5903 13 лет назад

Is it for sale?

@diabel1969 11 лет назад

they didn't make any b/w 4 speed or t-10 malibu's, they're all saginaw's.. as for the 202 figure? not really sure where your getting your figures from on this video, but to my knowledge, gm produced 1200 G body manual shift cars per year (on the average) which include malibu/elcamino/malibu wagons/monte carlo's. I personally have a 78 with the 4 speed, and have owned a few 1980 malibu 4 speed cars, and a 1980 elcamino 4 speed car. Nice clean car though..

@diabel1969 11 лет назад

i'm not doubting the car is real, as previously stated, I currently own a 78, and have owned other's including 80's and a 80 elcamino ss. I've NEVER seen that tilt column outside of an elcamino, which is why I inquired about it. Also I inquired about the shifter location, as it look to be in the factory location, and I fiddled with the idea of running a bw super T10 or muncie in my car, but couldn't figure out the rod for reverse as it's on the side cover of the saginaw, and tail of the others

@bh8922 8 лет назад

I will try and post another more current video soon.

@craigarvanites2217 11 лет назад

Did you want to sell? How much would you ask for it

@jedknutson8373 10 лет назад

very clean car...

@TheGearripper 12 лет назад

DAMN THAT IS A BEAUTIFUL CAR SIR!!!!......PUT SUM DRAG RADIALS ON HER...A MILD HYDRAULIC ROLLER FOR THAT STOCK SOUND...AND GO OUT AND RUN HIGH 11'S/LOW 12'S ALL DAY LONG!!!

@DYNODONNY 11 лет назад

Right on, thanks for the response....great minds think alike! I'm really gonna screw wit'em....i'm doin' a column shift!!!1

@ChicagoDonny922 5 лет назад

I made this comment 5 years ago...& I've had my '81 for about 3 years now. I have my big block (which I really need to start working on?) & I ALWAYS come to this car for my inspiration...she's PERFECT

@ChicagoDonny922 5 лет назад

Except I don't HAVE to do a column shift because my "Ol' Lady" CAME FROM THE FACTORY WITH THE FLOOR SHIFTER!!!! She didn't come with the "rally/ gauge pack" but hey, can't order a brand new 1981 Malibu anymore?!?!

@Speedkills396 12 лет назад

THESE ARE #'S FROM THE JULY 1991 SUPER CHEVY MAGAZINE FOR 2 DOOR MALIBUS WITH 4-SPEEDS. THEY LIST THEIR SOURCE AS TAILFINS AND BOWTIES. 1978=1654 1979=1903 1980=202 As you can plainly see..1980 had the lowest run of 4 speeds....202. Other sites have the same info. The tach and gauge package IS factory. The dash was changed to an 81 style dash but the gauge cluster is original. Please check your info before commenting. It's better to be thought an idiot then open your mouth and be proved one!!

@Speedkills396 13 лет назад

Yes it is a factory (one of 202) 4 speed car. However it is now an M -21 instead of the saginaw!

@Speedkills396 10 лет назад

I don't know what I would ask for it, why? Do you want to buy it?

@craigarvanites2217 9 лет назад

If Ya wanted to sell it i would be interested have Ya had anytime to get an idea about what ya would ask for it? Have ya done anything else to it since I last messages almost a year ago?

@Speedkills396 9 лет назад

Craig Arvanites It has complete dual exhaust that exits out the sides behind the rear tires, new fuel tank, holley 750 double pumper with mech secondaries, new headliner,factory radio. I also just picked up a 454 "289" 4 bolt block that I plan to build to put in the car this fall. I also have purchased but not installed a complete front end rebuild kit...all bushings and tie rod ends.

@craigarvanites2217 9 лет назад

So no plans of selling if ya going to do front end and motor build?