1987-89 TOYOTA PICKUP/4RUNNER NO CRANK STARTER RELAY FIX

Подписаться 580

Просмотров 6 тыс.

50% 1

Amazon link to relay I used
irhapsody 4-PIN 40/30AMP 12V DC Waterproof Relay with Harness - Heavy Duty 12 AWG Tinned Copper Wires, 1 Pack SPST Automotive Relay a.co/d/cQpFOv8
inline fuse holder
Bussmann BP/HHG-RP Heavy Duty In Line ATC Fuse Holder with Cover (32V/30A #12 Wire Leads), 1 Pack a.co/d/iq8qkcl
crimp connectors
Limited-time deal: Kuject Heat Shrink Wire Connectors, Multipurpose Waterproof Electrical Wire Terminals kit, Insulated Crimp Connectors Ring Fork Spade Butt Splices for Automotive Marine Boat Truck (200PCS) a.co/d/dQ4xllT

Опубликовано:

15 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@octaviochavez4085 6 месяцев назад

I’ve tried running the wire directly to the harness and it worked. However, it’s more of a temporary solution because I started having the same problem again after about 2 years. I am now looking for a more permanent solution but I am also reluctant to get a ford relay in there. This looks like a great idea and it looks very clean and factory. Thank you for sharing!

@archaicautomotive2444 6 месяцев назад

Glad it helps! I've had this set up for a couple years now and have not had a problem.

@sc0mer 5 месяцев назад

THANK YOU for posting this. I just did it and you saved me a lot of grief.. :)

@archaicautomotive2444 5 месяцев назад

Of course! Glad it helps! 🙂

@chrishanna3422 2 месяца назад

Ordered everything and cranked right up. Thanks buddy

@archaicautomotive2444 2 месяца назад

@@chrishanna3422 no problem, I'm glad it helped you out!!!

@JimGiddens3 7 месяцев назад

Great video. Thanks for sharing this.

@archaicautomotive2444 7 месяцев назад

Thank you!

@beverlyaustin924 2 месяца назад

I have an 86 toy base, 5spd rwd. I also had the no click start problem. Did the wire by pass method n no starting issues since the install.

@JoseMarin-ww3ws 2 месяца назад

Coolness!

@BillBaker-m5q 17 дней назад

do you have a video for the pre 1987 fix yet?

@archaicautomotive2444 6 дней назад

Not yet, It would probably be easier though as you just need to add a starter relay.

@williamcook2634 12 дней назад

I followed these instructions and still got the click. Any ideas?

@archaicautomotive2444 11 дней назад

@@williamcook2634 have you tested your starter?

@Ryan-ji5kw 4 месяца назад

So if I already cut the harness and ran it to the battery, would I just keep that then just cap the red wire if I were to add this relay?

@archaicautomotive2444 3 месяца назад

Yes or reconnect it when you cut it from.

@aerialrescuesolutions3277 7 месяцев назад

Very cool, nice and tidy. How do you like the Weber? When I changed mine, it was night and day, I did put the Offenhauser intake on though, and a dual-row chain. JIm

@archaicautomotive2444 7 месяцев назад

Thank you Jim! The Weber works great I like it a lot more than the stock carb, It does have a little bit of issue at high angles when I'm off-roading but other than that it works really well.

@aerialrescuesolutions3277 7 месяцев назад

I heard they don't like elevation changes( going from sea level to 7000 ft up? I've not driven up into the mountains.@@archaicautomotive2444

@archaicautomotive2444 7 месяцев назад

@@aerialrescuesolutions3277 It's usually not too bad unless I'm going up a real steep incline. There's actually a modification that you can do to the Weber that relocates the fuel bowl vent to correct that issue. Maybe I'll cover it in an upcoming video.

@aerialrescuesolutions3277 7 месяцев назад

That would be great.@@archaicautomotive2444

@drewfleming7065 7 месяцев назад

Got a 38mm Weber on a LCE stage 2 stroker..(160hp).Only problem is it blows up G and W transmissions...had to find a R151F and it cost me big along with a V6 diff....Anyone installing a Weber remember they only need 2.5 to 4 psi fuel pressure(OEM pump is 7 psi), anything more and they run very rich and cant tune... Before you cut up any wires make sure the rely is totally bad, Ive opened one and cleaned the contacts and fixed it....

@JamesNealon-b5h 2 месяца назад

Man I feel like the dumb guy but the battery wire hooks directly to the pos on the battery?

@archaicautomotive2444 2 месяца назад

@@JamesNealon-b5h Yes it will connect directly to the battery.

@JamesNealon-b5h 2 месяца назад

Yeah Thanks man wiring makes my head hurt but I looked at it just seemed too easy . Basically bypassed all the Bs. Unfortunately I already had purchased an expensive used relay. I used the same starter for ten years aftermarket then went through 3 in six months one was bad out of the box second one lasted a month and then I the third one was going it seemed to lock up at times still think the solenoid could be hanging up but its very random and at 50 im just get too old to pop start my rig, so anyways thanks for the info

@archaicautomotive2444 2 месяца назад

@@JamesNealon-b5h I'm glad it helps you out man! I've had this set up for probably around 4 plus years now and it's never not started.