Тёмный

1992 Chevrolet Silverado Transformation! From Junk to Jewel! Daily Driver OBS SWB Build! 

Mortske Repair
Подписаться 181 тыс.
Просмотров 1,8 млн
50% 1

I snagged this 1992 Chevrolet Silverado regular cab shortbed 2WD rig up down in Oklahoma during our Puddin's Fab Shop visit. It was sitting abandoned on a front yard so I knocked on the door and was able to strike up a deal with the owners. They said it had run recently but was no longer running and that it needed some TLC. Lets see if we can't get it running and make it worthy of a Mortske Repair daily driver pickup! Thanks for watching!
Check out our new and improved Mortske merch site!!
mortske-repair.myspreadshop.com/
Join the "Duff Approved!" team to get access to perks like merch discounts, behind the scenes access and more!
/ @mortskerepair
Drop Duff or Mortske a line: mortskerepair@gmail.com
Instagram: / mortske_repair
Ship us things:
PO Box 1
Gwinner, ND 58040
Super Scraper gasket scrapers are for sale with pricing below:
SS1 1.25" wide wood handle - $33 shipped
SS4 0.625" wide long handle $31 shipped
SS5 0.625" wide short handle $28 shipped
Payments via Paypal or check vial snail mail. PO Box and email listed below.
Tools we use:
Greta Unapproved Fuel Jug: amzn.to/30R74bt
Noresman drill bits (not the 3 sided ones I like, out of stock): amzn.to/3n5UoVr
Norseman reamers: amzn.to/3B0YMtH
Spill proof funnel: amzn.to/3BmRMbd
Teslong endoscope: amzn.to/3sxysos
Trouble light: amzn.to/33756kQ
Streamlight Pen Light: amzn.to/3gSe3qA
Zep45 Penetrating Oil: amzn.to/3taR64i
Marine tank: amzn.to/2S6oUmf
12V inline fuel pump: amzn.to/3eHOGVC
1/4NPT to 5/16" hose barb fitting: amzn.to/33qPSYp
5/16" rubber fuel line: amzn.to/2SsLNjZ
Hot Sauce bottle: amzn.to/3u96zmS
Loser switch: amzn.to/3xEuL2s
Milwaukee 3/8" cordless ratchet: amzn.to/3wsHW6a
Milwaukee 1/2" Impact: amzn.to/3xDpzMb
Milwaukee 3/8" stubby impact: amzn.to/3e61pT9
Tekton 3/8" SAE deep impact socket set: amzn.to/332CZDv
3/8" wobble extensions: amzn.to/3nANCXw
GearWrench spark plug socket set: amzn.to/3uutdG9
Depstech bore scope: amzn.to/2Txx4Fa
Smittybilt XRC12 Winch: amzn.to/3eGG2qx
10 Ton Snatch Block: amzn.to/3gO6voI
Ingersoll Rand air hammer: amzn.to/3e7ULLY
Barrina LED Shop Lights: amzn.to/3gWiHDR
Filming equipment we use:
GoPro Hero 8: amzn.to/2PHSU7m
Carrying case: amzn.to/2ScTqeh
Camera tripod: amzn.to/3gOyULd
Camera light: amzn.to/2PB2SHp
Handheld camera mount: amzn.to/2QJBWG3
External Microphone: amzn.to/3vzdENY
Suction cup mount: amzn.to/3vqC1Nw
Sammich donations gladly accepted on Patreon :
www.patreon.com/user?u=49148891
#obschevy #c1500 #mortskerepair #RCCSB #daycab #regular cab #nostart #brakes #suspension #stereo #upgrade #transformation #exhaust #rustfree #shortbed #lowered #shortbox #dailydriver #loweredtrucks #djmsuspension #MortskeRepair #willitrun #V6 #abandoned #ranwhenparked #barnfind #patina #oldjunk #mechanic #rusty #rust #badgas #nobrakes #12volt #hackmechanic #stuckengine

Авто/Мото

Опубликовано:

 

7 ноя 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 2,4 тыс.   
@SladeM.
@SladeM. 2 года назад
Security system installed by "Dashfire Dan"
@ghostfox3560
@ghostfox3560 2 года назад
Those discount car alarm & starter systems from Dashfire Dan must have been a nationwide thing. Got rid of the one on my Ford Econoline van and it came back to life right afterwards. Just yeet that system and mend those wires and boom...
@MIKEH.777
@MIKEH.777 2 года назад
With a name like Dashfire Dan, I wouldn't by nothing off him and burn my truck down lol😂🤣😂🤣
@dalehovland3283
@dalehovland3283 2 года назад
Removed one off my 00 f250
@joebrock9784
@joebrock9784 2 года назад
Investing in future technology
@joebrock9784
@joebrock9784 2 года назад
Most people weld them in c noches
@PuddinsFabShop
@PuddinsFabShop 2 года назад
Not too shabby!!! It was cooler than hell that the kid you bought from had been watching your channel and then you showed up at his door!
@hensleyshobbies-doug7761
@hensleyshobbies-doug7761 2 года назад
That ain’t no sh..stuff!
@Denzeltheshepard6200
@Denzeltheshepard6200 2 года назад
Well look who it is lol how are you doing Puddin
@crbrepairmotorcycles6608
@crbrepairmotorcycles6608 2 года назад
Everyone watches the Mortske show Puddin
@BobPegram
@BobPegram 2 года назад
Did you check if he watches your videos Puddin? Oh yeah, congrats on the other reason for Mortske's visit!
@robertkeable1627
@robertkeable1627 2 года назад
He will remember that till he pops off to the scrapyard for good. Brilliant stuff indeed. UK.
@backyardmechanicrestoratio6958
@backyardmechanicrestoratio6958 2 года назад
Man i really had to rewatch this episode for the 3rd time one of my favourite budget builds goes to show you can have nice shit without going broke we need more of these style builds
@MortskeRepair
@MortskeRepair 2 года назад
Much appreciated for the views!
@nathonsmithson3024
@nathonsmithson3024 2 года назад
usually the stamped metal clamp on the brake hose rustjacks and pinches off hose. quick fix is open it up a little with a pry bar or screw driver. easy peasy. lemon squeezy
@firearmsamerica4606
@firearmsamerica4606 Год назад
Are you saying I need to build my 96 better?
@mrromantimothy
@mrromantimothy Год назад
Just don't be like pudding you can have a nice shit but you don't need to rub it all over the body
@shannonlawsonnashville
@shannonlawsonnashville 2 года назад
I got to say dude, it’s really commendable how you promote other peoples channels. I wouldn’t know about Puddin’s channel if it wasn’t for you. Good content and you’re a good dude
@MortskeRepair
@MortskeRepair 2 года назад
We're a community out there!
@JohnHartman22
@JohnHartman22 2 года назад
Same but in reverse, I wouldn't have known about @Mortske Repair if it hadn't been for following @Puddin's Fab Shop.
@MortskeRepair
@MortskeRepair 2 года назад
@@JohnHartman22 Good group of channels out there supporting one another!
@keimahane
@keimahane 2 года назад
Yup, I heard about Mortske from watching Puddin, love the community feel with these guys and the content is awesome too.
@justinsane7128
@justinsane7128 2 года назад
I thought so too and then I saw puddin's rap video, you can't unsee that.
@beardedscrapper538
@beardedscrapper538 2 года назад
The only good thing about Monday. A new mortske and duff video. Hell yeah.
@OOFGARAGE
@OOFGARAGE 2 года назад
Big this
@keithharden7844
@keithharden7844 2 года назад
Mortske and Puddin.
@danielnowicki917
@danielnowicki917 2 года назад
One thing I really like about this channel. Mortske does things any one can do on a budget!
@MortskeRepair
@MortskeRepair 2 года назад
Sure do! Thanks Daniel!
@michaelslattery2121
@michaelslattery2121 2 года назад
Give him some credit... He's smarter than the average bear. Ey , Boo-Boo?
@chuckherbert3656
@chuckherbert3656 2 года назад
He’s gotta do it on a budget or else he’ll loose the shop
@nopleaseno2515
@nopleaseno2515 2 года назад
Yes exactly. Once some RU-vidrs, make so much money they can switch states and afford warehouses, I’m out! Happy for them but no longer a source of information for me! Cheer ya’ll.
@MortskeRepair
@MortskeRepair 2 года назад
@@nopleaseno2515 Hahaha, no comment!!
@johnfadin6
@johnfadin6 2 года назад
right on,finally a youtuber that uses what they record. love the long videos Mr. M
@MortskeRepair
@MortskeRepair 2 года назад
Thanks John!
@davesharp5507
@davesharp5507 2 года назад
Same here! Love to see lengthy videos!
@franksgarage8551
@franksgarage8551 9 месяцев назад
Funny, i got complimented on having short videos. Long ones are ok as long as they are interesting.
@larrydixon-vi7ld
@larrydixon-vi7ld 21 день назад
Alarm system starter kill relay should be under the dash , connect the red and white wires together and it should start
@dixonrudman2570
@dixonrudman2570 2 года назад
That was tremendously enjoyable, I hope we see more of the Black Knight.
@davidmiller6726
@davidmiller6726 2 года назад
I'm a Ford Guy, but really enjoyed this episode! It's great to tag along while you narrate, Duff Dog helps out and you show us and explain your work!
@MortskeRepair
@MortskeRepair 2 года назад
Glad you enjoyed it David!
@jameslund221
@jameslund221 2 года назад
Poor Duffy, he’s all tuckered out. 🙂
@johnm.5848
@johnm.5848 2 года назад
I was about to head out the door awhile ago for a couple of hours but I have time for one more cup of Joe with the latest Mortske and Duff video. As always Mort, a big two thumbs up.
@MortskeRepair
@MortskeRepair 2 года назад
Thanks John!
@Rav_4_Guy
@Rav_4_Guy 2 года назад
I’d like to see a part 2 on the paint, exhaust interior and general maintenance. I enjoyed the extra long video
@itsnotjunkyet1290
@itsnotjunkyet1290 2 года назад
Cool video, its nice to see there are other guys out there like me who believes in breathing life back into old vehicles that are still solid. Thanks for going into specs and finer points, IE, pinion angles, threads of studs etc. I like black on it short bed with 350 is cool. Keep the build going please, save it, it deserves to be saved. Love the channel!
@MortskeRepair
@MortskeRepair 2 года назад
Thanks for watching!
@aarondavis4341
@aarondavis4341 2 года назад
I've searched for 6 months for a pre 1995 truck...wish I could've found one from the 80s but I tried for a 92..I open the hood there's a MOTOR under it..not a computer! No pollution junk, love me an old everyday driver!
@tjakr3869
@tjakr3869 2 года назад
What a great start to the week
@MortskeRepair
@MortskeRepair 2 года назад
Thanks!
@dave1135
@dave1135 2 года назад
32:15 those pickup coils are known to go bad, either just flat dead and no spark or it can cause running issues. For timing, by the power block and fuel pump relay on the passenger side of the firewall, there's a single wire connector with a tan wire with a black stripe, that's the ignition bypass lead, when you unplug it, it puts the module in base time. You can then set the timing. Timing for those was 10° btdc
@johndelta00
@johndelta00 2 года назад
0* with EST disconnected.
@daddyb9432
@daddyb9432 2 года назад
Yes its 0* with the wire unhooked. I have owend five of those trucks. Some of the teucks the wire is under the dash by the blower motor
@perotekku
@perotekku 2 года назад
Don't think I'll ever own or have to time an OBS GM truck, but I love reading comments like these. Spread the knowledge! 👍
@jasonearp8720
@jasonearp8720 2 года назад
I do like how you collect a whole series of videos start to finish and put it out as one story not multiple little snips.
@MortskeRepair
@MortskeRepair 2 года назад
Damn straight! I hate guys who drag it out into 47 videos!
@leemp337
@leemp337 2 года назад
those bird colors were beautiful. nature is amazing.
@MortskeRepair
@MortskeRepair 2 года назад
They are!
@johnhere6058
@johnhere6058 2 года назад
WOW - I had to take a double take - I have exactly the same truck in my back yard including the black tool box - so you got me hooked
@MortskeRepair
@MortskeRepair 2 года назад
Nice!
@twinkie27271
@twinkie27271 2 года назад
Mines a 93 extended cab with a chrome box. I'm in Kansas, and mine has way more rust than that one.
@markwatts6683
@markwatts6683 2 года назад
I'm a truck guy so this by far is one of my favorite videos on trucks, can't wait to see it finished , maybe paint and new carpet. I love your work and your commentary I wish I could bring you my 70 C10 with low compression. Keep up the good work!
@MortskeRepair
@MortskeRepair 2 года назад
Right on!
@patrickmorrissey2271
@patrickmorrissey2271 2 года назад
Heh heh!!!! I was laying under the truck, in a tight space, and I had a Tiffany..... Heh heh heh!!!! always nice to have a Tiffany.... I'm only here because Watch Wes Work said you were good.... You ARE good! He did not lie....
@MortskeRepair
@MortskeRepair 2 года назад
Much appreciated! Wes certainly knows his stuff! Well, mechanically...
@Nza420
@Nza420 2 года назад
Thanks once again, Mortske. I recently was sent to the junk pile by my post-wall garden tool because I am merely a "sandwich artist" instead of a hoover schneef aficionado. This week's video was very helpful to me. Also, don't cut the videos up. The longer, the better.
@coolstuff9264
@coolstuff9264 2 года назад
Thanks for the Canadian channel call out, great bunch of guys
@MortskeRepair
@MortskeRepair 2 года назад
Yup!
@kellysrestorations.7397
@kellysrestorations.7397 2 года назад
Good save and great transformation! I typically take the carpet right out and pressure wash it, Takes about a week to dry , but i've found it to be the best way to really clean it.
@MortskeRepair
@MortskeRepair 2 года назад
Worth a shot!
@shawnprime1143
@shawnprime1143 Год назад
Those years had trouble with the paint fade. Common. I like this one.👍👍👍
@MortskeRepair
@MortskeRepair Год назад
Thanks 👍
@Collinormous
@Collinormous 2 года назад
Love it! Still think these are some of the best looking Trucks GM put out
@RearEngineShop
@RearEngineShop 2 года назад
Nice truck! Would be rotted if it was here in Michigan too. 👍
@spacecadet0
@spacecadet0 2 года назад
I've seen a two year old Durango rusting through its own bumper in the salt belt... It's not good for automobiles.
@RearEngineShop
@RearEngineShop 2 года назад
@@spacecadet0 nope. We have a lot of rusty junk in these parts.
@shaunpatchett2510
@shaunpatchett2510 2 года назад
Thats me sorted for the next two hours or so.😊😊😊
@stephensaasen8589
@stephensaasen8589 2 года назад
If it has a new ignition coil on it, count your blessings. I don't think they go out often on these type of system but if they do, you might be in for an interesting time. We had a Hyster forklift come into our shop for a starter issue years ago. It had a 3.0L GM 4 banger but same type of ignition system you have here. The thing would start cold okay but as the engine warmed up, she'd pop and backfire like crazy. After she warmed up, that thing would kick back really bad when you'd start it like it was out of time. It actually kicked back so bad that we broke the nose cone on the starter. Lucky for me the pieces were close enough to the starter hole to fish them out without separating the engine from the bell housing. We monkeyed with timing. I didn't realize at the time that the pickup module compensates timing or I would've probably concluded the problem sooner. We knew it wasn't the pickup because when they quit, the engine dies. Anyhow, on a whim, we replaced the coil and the problem went away. I'm guessing the pickup module was trying to adjust timing for a coil that was failing and that's how we got the gunshot backfiring and kickback starts. I don't think I'll ever forget that experience. Enjoy your Okie truck.
@carwashadamcooper1538
@carwashadamcooper1538 2 года назад
OBS Chevy. Lots to love and There's nothing a whole lot of money can't fix! Trust me. I own one...
@Tee_Spoons_Garage
@Tee_Spoons_Garage 2 года назад
I look forward to Monday’s now because of you and puddin keep up the great content
@MortskeRepair
@MortskeRepair 2 года назад
Thanks Jason!
@dmaxlife2785
@dmaxlife2785 2 года назад
I’m just glad mortsky got home before he started thinking the family reunion is a great place to meet women. Oakie family tree resembles the Olympic Rings
@MortskeRepair
@MortskeRepair 2 года назад
@@dmaxlife2785 haha
@jcargentum
@jcargentum 2 года назад
You got a like for Paul Walker 9:09
@MortskeRepair
@MortskeRepair 2 года назад
Thanks!
@braddokken9191
@braddokken9191 2 года назад
Two hours of Mortske my evening is set! It's raining, I have work to do on screen 1 and Mortske on screen 2 and Penny, my Brittany, is begging for attention. Life is good!
@MortskeRepair
@MortskeRepair 2 года назад
Sounds like a ruff life!
@toddswenson9137
@toddswenson9137 2 года назад
I like your rock music, it makes you work really fast!
@beardedscrapper538
@beardedscrapper538 2 года назад
I had a 96 silverado ext cab with the 350. She'd lay a posi strip with a full load of firewood in the bed. Great trucks.
@MortskeRepair
@MortskeRepair 2 года назад
Sweet!
@danielstrachan8988
@danielstrachan8988 2 года назад
I remember when I was a kid my folks would use the cup holders when we would be out on a picknick they said you only use them when parked.dad would say ask me how I know hahaha.😁😁👍👍
@andrewlyons9188
@andrewlyons9188 2 года назад
Yep.. Have been doing parts for 23 years. Can concur.
@GreyBeardz
@GreyBeardz 2 года назад
Many miles in a TBI chevy. I believe that sensor you showed was a knock sensor. One problem had on mine was PVC line plugged up and caused Crankcase pressure to build and would push oil out rear main. Cleaned the TBI base plate and solved oil leak. 240k on the engine and transmission never missed a beat while I was stationed at Grand Forks AFB.
@petterkanto1925
@petterkanto1925 2 года назад
Hey Mortske, greetings from sweden. great content, awesome channel. You sir has taught me alot on how to motivate myself in the garage. And alot of good info on chevy smallblocks. Its best to learn from an amercian! Youre a good tutor and fun to watch. and huge love to duff, best shopdog ever!
@MortskeRepair
@MortskeRepair 2 года назад
Glad you appreciate it in Sweden!
@ianmangham4570
@ianmangham4570 2 года назад
Don't ya just love the old worn and battered blue, she's been out in the sun working for a living and she looks beautifully weathered
@mdouglaswray
@mdouglaswray 2 года назад
Excellent belch. Your man card is stamped for this month.
@stucook8622
@stucook8622 2 года назад
Thanks for the Mortske Monday! It seems like you guys had fun down there. Thanks to Puddin his wife and all you guys that make the content possible. Good luck with the new rig🐾
@MortskeRepair
@MortskeRepair 2 года назад
Much appreciated for watching and commenting Stu!
@mrcampbell75
@mrcampbell75 2 года назад
I have a 95 silverado. I just switched it from tbi to carb and HEI. Runs so much better. Nice truck Mortske.
@rdr9519
@rdr9519 2 года назад
What is HEI? I also drive a 95' with the 350 in it
@mwalshisme
@mwalshisme Год назад
@@rdr9519 High Energy Ignition. You probably already looked it up. Electronic ignition without points and condenser.
@crunchycowboy3206
@crunchycowboy3206 2 года назад
I bought a 10 year old 1991 GMC short bed and drove it for about 15 years. Sold it a year ago and the guy has refurbished it and uses it as a daily driver. I loved that truck and was excited to see it go to a good home.
@jamesboone2829
@jamesboone2829 2 года назад
Had a 1990 Sierra short bed that didn’t run for over 12 years it took little to nothing to bring it back to life and I did remove the tbi motor for a 2003 5.3 swap! A little cash for the transplant but well worth the 295 horses it produced and swapped in a 4l80 trans and posi for the back!
@MortskeRepair
@MortskeRepair 2 года назад
Heck yeah!
@jamesboone2829
@jamesboone2829 2 года назад
Finishing up watching the 92 episode pretty cool truck you’ve got there! Hope you have good luck with the pup! The best trucks, right!
@WatchWesWork
@WatchWesWork 2 года назад
I think the only tool you need for any parking brake cable is a trash can...
@dburatti465
@dburatti465 2 года назад
Unless your state has safety inspection
@MortskeRepair
@MortskeRepair 2 года назад
I agree! Unless it's a manual...
@rustygriswold182
@rustygriswold182 2 года назад
Love me some Wes and rust. NE Ohio guy. Its bad.
@BobPegram
@BobPegram 2 года назад
@@rustygriswold182 Try South Main Auto too.
@brucebonkowski9568
@brucebonkowski9568 2 года назад
Then if ypu one like uour white with the 4.3 v6
@chrisclark6192
@chrisclark6192 2 года назад
Hi from the uk. Hello Mortske and Duff. Superb video and fun to watch. It looks like a great and useful truck. I think that it would look better with a decent paint job and a nice picture of Duff airbrushed on the hood. It appears to be in great solid condition. Again another enjoyable video. Stay safe and well. Cheers Chris.
@MortskeRepair
@MortskeRepair 2 года назад
We're not much for painting stuff around here!
@eligarcia215
@eligarcia215 2 месяца назад
These are the best trucks Chevy has ever built. I have three and they’re still running strong.
@ToriL97
@ToriL97 2 года назад
My grandpa had one of these when I was little. My grandparents would come pick me up from school so we could go camping. My uncle owns it now, sadly it needs a lot of body repair, can corners, bed side, and fenders. Dunno about rockers but probably those too. I've thought about buying it from him so I can fix it up.
@MortskeRepair
@MortskeRepair 2 года назад
Awesome!
@dmaxlife2785
@dmaxlife2785 2 года назад
Dam you make me feel old as hell. My grandpa drove a 1974 ford grand Torino and my first brand new off the show room vehicle was a 1993 1500 short bed.
@ToriL97
@ToriL97 2 года назад
@@dmaxlife2785 sorry 😂😂😂
@jamessaddoris8693
@jamessaddoris8693 2 года назад
You definitely brought that truck back to life, and with style! Great to see revival and rebirth of a good vehicle. Obviously Duff approved! Keep up the awesome work man.
@MortskeRepair
@MortskeRepair 2 года назад
Right on!
@prevost8686
@prevost8686 2 года назад
I have an OBS Silverado and other than having to replace every single component on the truck, some even twice, it’s been bulletproof 😁. Apparently all the UAW workers that built mine were drunk on the job when the put it together.
@dmaxlife2785
@dmaxlife2785 2 года назад
No we were not drunk. GM goes with the cheapest bidder with absolutely no loyalty to vendors that have been reliable.
@plasmaty
@plasmaty 2 года назад
@@dmaxlife2785 slap a gm 5.7 or 5.3 in literal shit and I'd still buy it for that sucker
@michaelhuey4187
@michaelhuey4187 2 года назад
HAIL to the YAS we want to see you finish this baby up‼️ YAY, 2+ hour Mortzke Monday👍
@pokey999991
@pokey999991 2 года назад
Duff Dog Had FUN!
@MortskeRepair
@MortskeRepair 2 года назад
Sure did!
@Tyler_Sims
@Tyler_Sims 2 года назад
Pull carpet pressure wash go get black rit fabric dye. Dye carpet pressure wash again cheapest way to get decent carpet.
@realdeathpony
@realdeathpony 2 года назад
Side cutters, AKA alternative lifestyle cutters.
@franksgarage8551
@franksgarage8551 9 месяцев назад
Parts days. I remember them well. “You want those wipers with or without free install” Customer almost always said without, no with! Always had to put them on in the rain. Or that wet,sticky snow..
@dueljet
@dueljet 2 года назад
I am a nurse that works in the OR. We have about 8 different kinds of gloves in about 10 different sizes. Great content as usual!
@MortskeRepair
@MortskeRepair 2 года назад
That is awesome!
@TheHord
@TheHord 2 года назад
Nice truck! Glad it is going well, I'm about 1/2 way through, the replays are hilarious, new bumpers look fine, if I were close, I'd come help out! 🍻 I love the look, maybe have it sit up a little more in the rear, instead of lowering the front any more? especially if you put weight in the bed and for more clearance for tires? Look forward to any more videos you do on this rig. I don't mind the long videos, thanks for sharing. 🍻
@MortskeRepair
@MortskeRepair 2 года назад
Thanks 👍
@icondonnied
@icondonnied 2 года назад
Sidecutting pliers question- In the USAF way back in the 80s when you could be politically incorrect we referred to them as Bridgette pliers. She worked in aircraft maintenance. She liked girls. See what I'm inferring there?
@shadetreejoe3986
@shadetreejoe3986 2 года назад
Yup, call them the same thing. They're l.....nevermind. LOL
@MortskeRepair
@MortskeRepair 2 года назад
Hahaha sounds like a nice gal!
@ProlificInvention
@ProlificInvention 2 года назад
We all know a Bridgette 😆 I'm going to have to rename my sidecutters
@gmray7301
@gmray7301 2 года назад
Very nice rig! I am glad you show people that it can be done!
@user-vg9on1dq7f
@user-vg9on1dq7f 3 дня назад
I know this video is old, but you did great job! You amaze me with every video you’re very knowledgeable on about everything sir !
@MortskeRepair
@MortskeRepair 3 дня назад
Thank you!
@stuartkarshagen6274
@stuartkarshagen6274 2 года назад
That truck is way cool, love the lowered look. Those poor sods that parked and sold that truck must be kicking themselves 😅. Great episode, much rather watch 2 hours of your channel than anything else. 🤙🏻
@MortskeRepair
@MortskeRepair 2 года назад
Thanks Stuart!
@robertsmith987
@robertsmith987 2 года назад
i personally think duff should have himself a mullet in the camaro for the intro
@ZippoVarga
@ZippoVarga 2 года назад
Going back to 1994, I bought my first OBS (88-98) and a total of 13 have been bought since. Still own my 1992 and recently traded my '95 1500 for a 99 (Still OBS Body Style) C2500 3/4 ton. I'll never own anything newer. Mainly because they're full of Chinesium crap and no longer Union Built with the exception of the final assembly lines. Great Job on this one! Zip~
@MortskeRepair
@MortskeRepair 2 года назад
Damn!! Thanks!
@wasteddaze6281
@wasteddaze6281 10 месяцев назад
Such a great dude and so deserving of all the good that comes his way!
@kw9849
@kw9849 2 года назад
I am still not tired of the "dipstick" cutaway joke.
@MortskeRepair
@MortskeRepair 2 года назад
It's a good one!
@derricklamb9666
@derricklamb9666 2 года назад
Puddin could have put that bumper on straight by himself
@MortskeRepair
@MortskeRepair 2 года назад
He's on a whole nother level!
@MortskeRepair
@MortskeRepair 2 года назад
@@IGDZILLA haha
@johnelliott7375
@johnelliott7375 9 месяцев назад
Duff Mortske is a great service manager.😊
@nealcampbell3190
@nealcampbell3190 Год назад
I have a 94 K1500 standard cab short bed I bought used in 96 in Richmond Va. It came with a dealer installed chip disable style security system. The only time I ever pulled that chip was when I had to work in DC, and that was only a few times. We moved from Quantico Va. to Camp Pendleton Ca. Never pulled that chip again. I still own the truck. Poor truck sat allot as we lived over seas for many years. It has 365.875 on the odometer now and I am fixing it up for the C10 shows. The GMT 400 is the best pickup made in my opinion. Edit: When I walked onto that lot eyeballing that truck, The dealer must have done a backflip seeing a young Marine with a pocket full of cash. 18000 is all it had on it. I paid cash and walked out with a truck that out lasted my marriage. Out side my kids, Best decision of my life.
@thirdcargarage2951
@thirdcargarage2951 2 года назад
Ok Totally lost my shit with the “pretty bird” Dumb and dumber. So classic.
@MortskeRepair
@MortskeRepair 2 года назад
The best!
@joshuadudte8326
@joshuadudte8326 Год назад
Thomas Mortske is the only reason I could restore my 1972 GMC 1500. Thank you Mortske repair!!!!
@MortskeRepair
@MortskeRepair Год назад
Our pleasure
@virtuestreams2616
@virtuestreams2616 2 года назад
This is a full length movie production-nice!
@bigjobford1956
@bigjobford1956 10 месяцев назад
Puddin people love you because of you,,,and you don’t have to worry about what others think of what you do or need to do for your family because you have a great fan base because of you and your personality and consideration of your audience at the end of the day,We love You and your family and how you love them as a father and their Dad Which is What America is Supposed to be like,Thank you for all your trouble and work to keep us interested and entertained with your values and fun videos and your Sincerity,Kindness for your True Fans who will Always be there for you , You just keep being you 👊🏻🏆🇺🇸💕
@MortskeRepair
@MortskeRepair 10 месяцев назад
Much appreciated
@johnheimbrock4397
@johnheimbrock4397 2 года назад
show us how to dress out a pheasant.."that would be pretty neat"
@VikingDudee
@VikingDudee 2 года назад
I love my 92 Silverado 5.7, 400k miles on the old girl and its the most reliable thing I own, Mines the extended cab, when I took the back seat out and put a long tool box back there so I can still use the full length of my bed. I did have a carrier bearing go bad, I cut the crossmember out and put in a normal drive shaft I had saved for my 91 c1500.
@MortskeRepair
@MortskeRepair 2 года назад
Nice!
@pnowikow
@pnowikow 2 года назад
Gotta be rewarding to get it running. My brother and friend Pete dropped their S-10 pickups
@JohnKaiser-lz2gl
@JohnKaiser-lz2gl Год назад
Thanx Mortske, I love this truck! Thoroughly enjoyed this vid, looking forward to the next chapter on this truck! Late 80s to earl 90s GMC/Chevy are my favorite trucks, luv your vids on these! Thanx again, much appreciate the entertainment & education! Also, LUV the Duffster!
@AvalancheMan
@AvalancheMan 2 года назад
I enjoyed watching you fix and ungrade your daily driver. I 'd love to see you do more to it including the paint. I loved every minute of it. Keep up the good entertaining content and God bless.
@MortskeRepair
@MortskeRepair 2 года назад
Thanks much! Unfortunately we're not a fan of nice paint.
@roypearce6968
@roypearce6968 2 года назад
Love all your comments about what Wes work . Nice truck you have there and a great video and always enjoy you and duff . Even though it took me awhile to watch it. 👍👍
@flyonbyya
@flyonbyya 7 месяцев назад
ARTS AND CRAFTS TIME ! kinda brought me back my 80’s Hung Over Saturday mornings watchin Pee Wee Herman ! Oh how I miss those days !!!!
@murmur3966
@murmur3966 2 года назад
Hey that looks awesome the way you lowered it. That truck looks like a gem that you can be proud to go to town in.
@danielalamo2075
@danielalamo2075 2 года назад
We have a 91 GMC Sierra and the windows usually won't work when it rains. Right now they are stuck down. Just what need, another project. Anyway, nice job on the truck. Those things are worth big money here in the central valley of California.
@MortskeRepair
@MortskeRepair 2 года назад
Found a loose pink wire that plugs in the fuse panel
@DJTAZ1996
@DJTAZ1996 2 года назад
The perfect shop truck. Peppy 350 with shortbed. Throw on a flowmaster muffler and route tailpipe out in front of rear tire instead of over rearend and no more bumpity bump. Love how duff helps you out
@MortskeRepair
@MortskeRepair 2 года назад
He’s good help!
@skeetlegeetles9449
@skeetlegeetles9449 2 года назад
Great project. Had a "wow" moment when you boiled the brake fluid, never seen that before! I like these longer vids, I've learned a lot. I build model cars and that's about as close as I get to what you are doing.I like how you guys promote each other. I used to watch CWM when they kept it simple. Checked out a couple of others. But you get right to the point and duff is a real charachter. Thanks for everything and looking forward for more entertainment. Cheers from WA state!
@MortskeRepair
@MortskeRepair 2 года назад
Thanks!
@rickmurphy2960
@rickmurphy2960 2 года назад
The clear box with the adjustment pot was the motion / impact sensor for the alarm. That alarm and sound system install was definitely world class!
@thomasdavis5
@thomasdavis5 2 года назад
Love it! Great find for sure!! Can't wait to see what else you do it!
@johndontigney947
@johndontigney947 2 года назад
This is how I relax,watching your videos,plus I learn stuff!
@MortskeRepair
@MortskeRepair 2 года назад
Glad to hear it John!
@travisdrum6760
@travisdrum6760 2 года назад
Can't wait to see how good it looks after ya finish her up!!
@thecollectoronthecorner7061
@thecollectoronthecorner7061 2 года назад
At present Im parting out 16 of those square cab Chevy and GMC pickups. They tend to be rust buckets even here in Arkansas. However I have a 86 GMC cab thats 100% rust free. Ive only had two rust free square body cabs . I sold a chevy 3/4 ton rust free cab last year. I can realize more money by junking a square cab than by trying to sell a running truck. Especially if it a long bed hardly anyone wants a long bed.. I use the front crossmembers under the 60 thru 70 trucks to convert to 5 lug front disk brakes. I prefer the older GMC frames because they came with rear leaf springs and a 73 & newer rear end will work and you can get 5 lugs & a more desirable gear ratio. My wrecker is a 82 -3/4 ton. It has a 305 and turbo 400 trans. Im just finishing a engine install in my 71 -3/4. the original 402 dropped a valve. so now its a 454. It will soon be my wrecker and my 82 will bite the dust.My self I wouldnt repair a rusty square cab even if you gave me the patch panels for free.
@joer8399
@joer8399 2 года назад
It looks like Duff approves of this one, that means it deserves to be driven for a few more years.
@DanDan-yy8sf
@DanDan-yy8sf 2 года назад
I always make time for a 2 hour Mortske & Duff video. Great channel, you already know..... Just finished this video, got my weekly fix and good to go until the next one. "Stop, Drop and Roll" is how I sum this video up. Mortske knew just what to do,,, Do you ???
@michaeledwards3126
@michaeledwards3126 2 года назад
Gotta love my 1994 k1500 z71. I bought it new end of 1993. Many performance upgrades, 4 inch lift and 33inch tires later, it now has 401,000 miles on it. That's original motor and trans. Love the videos. GaMike
@MortskeRepair
@MortskeRepair 2 года назад
Nice!
@T0tenkampf
@T0tenkampf 2 года назад
OMG YOU GOT THE UNDERHOOD WORKLIGHT WOOOOOOOOO. I recognized the security system starter kill immediately...had an excalibur under mine too when I bought it.
@johnheimbrock4397
@johnheimbrock4397 2 года назад
Just get ya some "Armor All" she'll buff right out..and for the headliner can of krylon grey..It's a budget build..and call her "Blurado"
@steelmill888
@steelmill888 2 года назад
Man I gotta get rid of my firestick and just watch your channel.This dry humor is classic gold.I like that your not cursing every other sentence plus I always learn something new.
@MortskeRepair
@MortskeRepair 2 года назад
I appreciate that
@ManBearPig3
@ManBearPig3 2 года назад
Yes, A colab with you, Puddin and Wes would be awesome
@Ss010101
@Ss010101 2 года назад
Here I am prowling FBM all day and it turns out all you gotta do is spot a truck in the wild with some weeds growin' up around it and knock on a door. That's quite the score!
@MortskeRepair
@MortskeRepair 2 года назад
That's exactly what you gotta do! Get off your duff!
@tbas1972
@tbas1972 2 года назад
You can time those trucks, under that relay cover or by the glove box, you'll find a tan wire with a black tracer, it'll have a plug on it, un plug it, that bypasses the timing that the computer gives it, set it at 0 degrees then lock it down, plug the wire back in, clear the code it sets and your good to go, I've had tbi trucks my whole life
@sulistiman
@sulistiman Год назад
You got a nice truck needs a little more love. Last poor guy lost out
@phillanassa759
@phillanassa759 7 месяцев назад
Diagonal Cutters are what we called them. Does it have a bad distributor main shaft? Back in the day we'd see these where they wouldn't keep timing or no start hot or at all times. Same goes for the pick up coil and module. GM's fix under warranty rebuild the distributor, install a new pickup/mainshaft/module. There should be a wire along the firewall (brown single wire comes to mind); disconnect to set initial timing. Reconnect, shut off, clear code. Bobs your uncle it runs like new. Occasionally we'd see a bad coil, typically on higher mileage units. Love the videos and the channel! Rock-On, Mortske!
@napadave100
@napadave100 2 года назад
Had a 94 GMC 2 wheeler with a 3 fitty. Miss that thing.
Далее
Try not to Laugh Game!
00:38
Просмотров 5 млн
Can we Make a PARKED Ranchero Reliable in a WEEKEND?
49:48
1999 CHEVY SILVERADO REVIVAL - 5.7
17:59
Просмотров 2 тыс.
We Bought an INSANE Crate Engine For the Mini TRX!!!
26:06
56 Olds Fenders on 49 Fleetline
54:45
Просмотров 56 тыс.
It Rained!! What Happens Next?!?
36:43
Просмотров 73 тыс.
Budget Build! $119 PAINT JOB For My Old Chevy Truck
1:02:58
Trafik Işığını Yönetmek #shorts
0:18
Просмотров 18 млн