1963 Chevrolet C10 Abandoned for 37 years in a field! Will it run?!?

Подписаться 184 тыс.

Просмотров 790 тыс.

50% 1

I picked up this 1963 Chevrolet C10 longbed 2WD pickup from a pasture where it had been sitting for many years. It was last tagged in 1984. Let's see if this 230 cubic inch inline 6 cylinder engine and 3 speed manual transmission will live on again! If you're interested in purchasing the pickup I do have a clear ND title in my name. I'm asking $1500 for it in the as shown condition you see here in this video. Thanks for watching everyone!
Check out our new and improved Mortske merch site!!
shop.spreadshirt.com/mortske-...
Super Scraper gasket scrapers are for sale with pricing below:
SS1 1.25" wide wood handle - $33 shipped
SS4 0.625" wide long handle $31 shipped
SS5 0.625" wide short handle $28 shipped
Payments via Paypal or check vial snail mail. PO Box and email listed below.
Drop a line: mortskerepair@gmail.com
Ship us things:
PO Box 1
Gwinner, ND 58040
Instagram: / mortske_repair
Tools we use:
Trouble light: amzn.to/33756kQ
Streamlight Pen Light: amzn.to/3gSe3qA
Zep45 Penetrating Oil: amzn.to/3taR64i
Marine tank: amzn.to/2S6oUmf
12V inline fuel pump: amzn.to/3eHOGVC
1/4NPT to 5/16" hose barb fitting: amzn.to/33qPSYp
5/16" rubber fuel line: amzn.to/2SsLNjZ
Hot Sauce bottle: amzn.to/3u96zmS
Loser switch: amzn.to/3xEuL2s
Milwaukee 3/8" cordless ratchet: amzn.to/3wsHW6a
Milwaukee 1/2" Impact: amzn.to/3xDpzMb
Milwaukee 3/8" stubby impact: amzn.to/3e61pT9
Tekton 3/8" SAE deep impact socket set: amzn.to/332CZDv
3/8" wobble extensions: amzn.to/3nANCXw
GearWrench spark plug socket set: amzn.to/3uutdG9
Depstech bore scope: amzn.to/2Txx4Fa
Smittybilt XRC12 Winch: amzn.to/3eGG2qx
10 Ton Snatch Block: amzn.to/3gO6voI
Ingersoll Rand air hammer: amzn.to/3e7ULLY
Barrina LED Shop Lights: amzn.to/3gWiHDR
Filming equipment we use:
GoPro Hero 8: amzn.to/2PHSU7m
Carrying case: amzn.to/2ScTqeh
Camera tripod: amzn.to/3gOyULd
Camera light: amzn.to/2PB2SHp
Handheld camera mount: amzn.to/2QJBWG3
External Microphone: amzn.to/3vzdENY
Suction cup mount: amzn.to/3vqC1Nw
Need some Mortske apparel?!? Click the link below!
www.teespring.com/mortske-rep...
Sammich donations gladly accepted on Patreon :
www.patreon.com/user?u=49148891
#chevyC10 #farmtruck #MortskeRepair #willitrun #230 #longbed #C10 #c10life #1963chevy #inline6 #63chevy #C10trucks #abandoned #ranwhenparked #barnfind #patina #oldjunk #mechanic #rusty #rust #badgas #nobrakes #12volt #hackmechanic #stuckengine

Авто/Мото

Опубликовано:

20 июн 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,4 тыс.

@toddhayes9955 3 года назад

Capacitor shop tricks. Charge one up, wad it up in a dry paper towel and leave it in the urinal. No man alive can resist peeing on something in the urinal.

@MortskeRepair 3 года назад

Bahaha that's brilliant!!

@drilledithotmail 3 года назад

That's evil, I love it...

@ironcladranchandforge7292 3 года назад

Oh Jesus..... I'm getting tingley just thinking about it, LOL....

@chuckstith838 3 года назад

I remember my uncle had a dog piss on his trash cans every week. He hooked 120 volts hot to the can and a metal plate with neutral wire next to it. Around midnight I heard a dog blood curling cry and my uncle chuckle. Ouch

@kimjaniszeski498 3 года назад

@@chuckstith838 my Oldman used to park pickup against electric fence to get dogs to stop passing on tires..

@maddog3080 3 года назад

A full length feature film with all the action! All the suspense! All the surprises! A touching love story about a man, his dog, and a truck! Everything we've come to expect from Mortske! Keep up the good work!

@mdouglaswray 2 года назад

The pain! The pleasure! The joy! The agony! I'm still tingling (and I don't tingle easily anymore)

@DudesWithWrenches 3 года назад

I saw the thumbnail and here we go again 60s chevy pickup but I still couldn't turn away...you need to find one of these Rigs with a big V6 in it.. Keep up the good work 👍

@dansherrell6803 3 года назад

I have a ‘61 4000 dump but it runs already (and I’m way the hell up in NY) so you won’t see it here lol.

@dansherrell6803 3 года назад

@@pookysdad4884 yeah those engines are wild. No speed demon, but sure as hell make some low end torque.

@docsmallblock6584 3 года назад

@@pookysdad4884 I seen an old chevy dump, no clue what year it was but it had a V-6 in it but it had "hemi" heads on it!? Any idea what that was? I mean plug wires going in the valve covers, "hemi" style? Never seen one before or after but looked like a V-6 hemi to me in an old chevy dump. Would really like to know if anyone knows what I seen!

@rogerdumais7637 4 месяца назад

I love watching you work you do not get scared off if you want a motor to run you get into it and get it running

@cassiegrace30 3 года назад

The face you made after your "That wasn't smart, huh?" comment was absolutely priceless and I had to rewatch it several times cause I couldn't stop laughing 😆

@gmjunky87 2 года назад

@1:26:19 when the oil shoots out, his face is priceless!

@bobbeachler5521 3 года назад

I had a dog like Duff when I was a kid. Loved to hunt but would point grasshoppers and chase helicopters. He was oddly terrified of hot air balloons. His name was "Goofy"

@user-to1sq5gh8t 3 года назад

You're a great mechanic barely left mechanics like you if any in this modern world I learned a lot from your videos

@mulldoctor 3 года назад

I’m tuning in from Australia and love to see these old trucks come back from the dead. We never got these old C10’s over here so I’d be the envy of all my mates if I was rolling around in that - yep, even with all those whiskey dents. Sad that you were beat with this one but good on ya for giving it a red hot go! If it’s still kicking around in six months and you aren’t afraid to jam it in a shipping container give me a yell. That’ll give me time to bring the missus round to the idea

@melindaortiz9741 2 года назад

Good luck getting a truck out there People here in South Texas used to throw them away. 150 bucks scrap metal 😥

@tmason1921 2 года назад

U guys got Holden utes though

@tonyjohnston19701 3 года назад

Any time I see one of these old gems rotting in a field it hurts me. You're doing Gawwwwds work buddy :)

@mdouglaswray 2 года назад

Ahyamen!

@orange72mc71 3 года назад

Mortske made a movie on this one. And I watched the whole thing. I keep doing this and I really will lose the shop.

@tom-ehill2713 3 года назад

Hey Mortske and Duffer's!!! This is the exact same kind of truck and year that I learned how to drive a stick when I was 13!! Got to drive down fire Lanes,, bow hunting season,,ect. Good memories of my late Dad.

@special_kitty7195 2 года назад

I'm really enjoying these videos. I've learned a load of stuff and it blows me away how knowledgeable mortske is.

@MortskeRepair 2 года назад

Thanks much Nick!

@74beeper97 3 года назад

A little trick an old British mechanic taught me years ago to get engines with low compression started is to heat up the intake manifold. Just shoot the torch into the carb and let it suck in the hot air. Of course not so close it ignites the fuel in the carb but it more times than not will work. I've used that technique several time and it does work.

@danmackintosh6325 2 года назад

That, or if it's coughing over on a few but just won't "catch" you can give the (unlit) torch a little "pssssssst psst" down the throathole, just give the ones that are firing a little extra incentive to spin it faster.

@jockmchaggis6797 3 года назад

The full mortske experience with this one, not just one dead starter but two.. and a stuck engine to boot The amount of water that came out of the pan, I thought there's absolutely no chance.. gotta love GM I suppose 🤣

@holgerwittmann6376 3 года назад

This is why i like your Channel, you dont give up! That was a hard workout and i first had a feeling that you will make it, even with that totally flooded boat anchor. So it was exciting til the end! Thanks!

@JimmyMakingitwork 2 года назад

Ohhhh, same year as me. Nice! Man if not for that windshield rot i’d like it enough…

@CountryAndClassics 3 года назад

Does this bring back memories for me. What I learned to drive in when i was 18.

@browncarp 3 года назад

Put a tow bar on it, remove the plugs and pull it in 3rd gear for several miles. Build up some heat and seat the rings. Be sure you have good oil in it.

@scottjays360s.johnson2 2 года назад

Now that would work along with getting sll the water out of the oil with a complete oil change.

@spaceghost8995 Год назад

I always thought remove the fan and everything and the sparkplugs, put oil in the cylinders and use a huge air impact on the crank to spin it for a good while. Is that possible?

@duanew5265 2 года назад

I love this truck. I'm on disability and live in missouri. If I had money and it was running with a title I would buy it in a heartbeat. Because I know if mortske got it running it would be good to go.

@marccurtis3464 3 года назад

I learned to drive 3 on the tree in my Dads 1970 C/10. Southern truck brought to central NY. She was cherry after the Turquoise paint job. Glad to see guys saving these old machines for posterity!

@jrussellcase 3 года назад

I was starting to worry. I've gotten spoiled to your vids premiering in the morning.

@79tazman 3 года назад

I got a bunch of old school tools I inherited from my grandfather he use to own a garage before I was born in the late 60's and all through the 70's so I got some good old stuff and it wooks better then most of the new crap that's out today

@DennisMurphey 3 года назад

Just Love the "Valve Adjustor" and we all laugh no matter how many times we heard it.

@stucook8622 3 года назад

Thanks again for Mortske Monday! Duff's such a good boy🐾 Good luck with that cool rig.

@jslwrnc63 2 года назад

I love that you show the pain and frustration of working on cars! So many people think you just get your hands in there and wave them around and voila it all fix(said with Arabic accent)!

@MortskeRepair 2 года назад

Haha, I don't have the funds to do that!

@vintagedashboard6810 3 года назад

When I was a young boy my dad’s friend had a really nice c10 short bed with a mean 409. That truck was so freaking scary for a kid but my dad loved riding in with me and I can tell you I didn’t care much for it. Boy I wonder what one of those trucks are worth today.

@MortskeRepair 3 года назад

Man I'd love to get a hold of a 409!

@DavidSmith-fs4nt 3 года назад

"Gotta start, it's a Chevy." At least you can sell the glass out of it. That 230 was a solid motor for GM for years. We had that motor in a 2o ft. inboard outboard boat as a Mercury Mercruiser for 42 years. I was going to rebuild the motor but I couldn't get seals for the sterndrive from Mercury so the boat got donated to Goodwill. It was a solid motor in its day with a ton of torque and frugal on the gas. It could pull 2 slalom skiers easily in its day.

@jayceec3539 3 года назад

My dad had a 1964 chevy pick up,we used it for dump runs in our home town, ketchikan AK. When they are running correctly,& taken care of..they will last your lifetime!!

@rikbaxter1740 3 года назад

best of U tube. Coolest rigs , funny , learned a lot . I can now watch some of hacks on here and think '' this guy is doing it wrong ". Thanks for the videos , I look for them every day. Rock on . Hi Duff

@JamesCouch777 3 года назад

Kroil is amazing stuff, a machinist friend of mine introduced me to it some years ago and I've been using it ever since. Best penetrating oil I've ever used.👍 Marvel Mystery oil is great stuff too.

@robertmack7116 3 года назад

Mortske, you can start this thing. First, to raise compression, don’t pour Marvel in the cylinders- it’s too much, and too light. Use a heavy oil, like 50 weight, and just use maybe an ounce. That’ll stick around the rings and it won’t coat your plugs. Use some ether, it has a lower flash point. If the starter won’t make it kick, tow-start it! Once you get it running, those rings will wake up from their sleep and start to seal, and once the engine runs for a while it’ll start every time. C’mon, be a hero! Show us that you can do it!

@mdouglaswray 2 года назад

YAH!

@hadassafigueroa4017 2 года назад

@BRTowe Год назад

Pull starting definitely will help. It'll get it moving fast enough to make compression. That old starter was moving it awful slow.

@dylanromine4101 2 года назад

Glad to see I'm not the only one that lives on movie qoutes

@MortskeRepair 2 года назад

Heck yeah!

@billdavidson9350 2 года назад

Derek and melisa just to let you guys know I think you’re lovely love the way you work gives me a lot of joy in these hard times wishing you all the best. Regards from Scotland Bill

@lloydgreen4091 3 года назад

Good Video--Thank You for the Tenacity You put in this. Too good of shape for somebody not to Love & Want this with an easy title. Condenser is the old term for capacitor. If I were doin' "Will it starts" I'd would want a set of Cap, rotor & points on the shelf. Saves Time & swear words & aspirin. lol Having a Good HOT spark, Helps Save the starter, lol & the condenser has a lot to do with it. Once you'd get it fired off, you can always throw the old parts back in & new parts back on the shelf. Even Puddin had troubles with *thee capacitor* not too long ago. Once Again Thank You for the Time & Effort you put into these videos bringing them to us.

@damiangillett1476 3 года назад

Puddin never seems to be puddin his hands on a starter LOL

@haroldrogers6083 2 года назад

My 66 C-10 was my class project when i took auto mechanics at the jr college . We went thru every system on that old truck even put headman split headers on that 235 6 banger and dual bowl master cyl. With new brake lines . Ended up with a nice short box step side truck , love the body lines on those trucks !!

@herbmeglin4529 3 года назад

No doubt another good one on the way from Mortske and the Duffster. Can't wait!

@ChristopherCanfield 3 года назад

You should make a sticker that says Duff Approves with the sticker being an outline of duff standing up and have some little motion marks around his tail like it's wagging. Cheers!

@OOFGARAGE 3 года назад

I’d buy that for my pos

@MortskeRepair 3 года назад

I like that idea!

@chuckstith838 3 года назад

Classic truck rescue has that sticker for when his dog sniffs out trucks.

@rsprockets7846 3 года назад

@@chuckstith838 annabell

@rsprockets7846 3 года назад

@@MortskeRepair get duffy to bark and rate the vehicle start 1 to 5 barks

@livinglikarockstar 3 года назад

more spin, little more time, re-oil the rings, use laughing gas not raw gas to start. So close, you can do it! Love the show, dufferster too!

@MortskeRepair 3 года назад

Thanks for the tips!

@patrickmoodabe9728 2 года назад

Awesome video Mortske. Can’t believe how much you tried on this one. 👏👏

@fried-chicken420 3 года назад

Thank you so much for making my Mondays better once again amazing work brother really digging the truck series .......give duff dog some rubs ❤

@humphre7160 3 года назад

I think Duff is a breed called Britany Spaniel,they are very smart dogs.

@FeArhsma21 3 года назад

Yep, that's correct!

@danssmokintreasures 3 года назад

For sure. I had one just like him.

@MortskeRepair 3 года назад

Great dogs!

@tonyfriend7413 3 года назад

@@MortskeRepair Mine is A Cockerspaniel and yes they IS!

@79tazman 3 года назад

Yeah I had one as a kid that I saved from the dog pound someone left him tied up to a pole I guess and I got him named him king and he was my shadow use to follow me everywhere and loved to swim I lived on lake Erie one of the great lakes and he use to jump off the dock with us he was a great dog

@dereksimon3437 2 года назад

I've been sticking with you through this whole thing! I want it to start too!

@kirkhemmens1626 3 года назад

There's a guy on you tube named Jonathan W who started an old studebaker with bad compression by towing it 30 miles an hour behind another car. It was a hopeless cause when he started but he got it running.

@MortskeRepair 3 года назад

The tires would just skid this one was still so stiff.

@roccomassello1767 3 года назад

That thing was soooooooo close to starting. I was hoping there was one last Hail Mary , oil the cylinders , starting fluid and a battery charger on engine start. Great effort , Better luck on the next one. Can’t wait to see what’s next

@MortskeRepair 3 года назад

Yeah I shoulda kept after it but I was a whole week deep into this thing!

@deanstuder1775 2 года назад

So waste a week instead of spending another day on it and see it running and starting every time. After a week you should know it will start and then stay with it and start it. Your reason for quitting doesn't make any sense to me. It was a reason to get busy and finish it. Repeat after me. If it breathes it will run. That is all you need to focus on.

@allenbeaulieu7077 3 года назад

Hell of a good try Mortske, tried everything but it wasn’t to be. Great video, you showed a ton of patience. Big Al

@taxidude 2 года назад

One of the reasons I like manual transmissions is that you can pop them in a high gear and rock the vehicle to check the engine's not seized!

@JDLarge 3 года назад

That engine sounds like it’s fighting you saying “nah nah/nah nah nah… I don’t/wanna start… I don’t/wanna start!” We’ll, no one can say you didn’t go above and beyond trying, but when she’s loose she’s loose, and unfortunately that’s not the kind of girls I go out with. You’ve brought more dead and all but scrapped rusty steel back to life than imaginable and you make it fun… It is what it is. If you can’t make a doghouse out of it for Duff then off it should go… It’s onto bigger, better rustier, rotted metal, battery less, seized solid, bad starter, mice motels snatched at the crushers doorstep! Dude this channel is pure gold, You’ll get the next one… 👍🏼👍🏼

@MortskeRepair 3 года назад

Thanks much JD!

@AWL1977 3 года назад

Love the videos , Duff is truly an awesome dog 🐕. I'd like to make a suggestion, in the video it sounded like it was cranking to slow to start, wouldn't hurt to put a jumper pack or charger with boost on it.. an I'd bet it would fire right up ..

@MortskeRepair 3 года назад

It was just so stiff it wouldn't spin fast plus it didn't have much compression.

@mdouglaswray 2 года назад

@@MortskeRepair Your starter pack doesn't have an 11 setting?

@MortskeRepair 2 года назад

@@mdouglaswray shoot, it ain't got no settings!

@TheDecguy 3 года назад

Could have done a rebuild in that amount of time. Pull it and freshen it up. Who needs to see another 350 drop in (I’ve got nothing against 350’s). An old 230 is at least a little more fun. My first set of wheels was a 61 step side that my father bought for me. It was radio delete and heater delete. I drove it until November when the snow started.

@garycrawford6912 Год назад

Agreed,alot of work to reuse gaskets and stuff. Could have freshened her up in the time and money waisted.

@garycrawford6912 Год назад

If you have to valves adjusted in correctly it will be hard to turn plus it not opening the valves enough. Zero lash , just tighten until the slack is gone and you can still spin the push rod.

@maddoxlogging2303 3 года назад

Hey Puddin’, where you at??? This guy did another starter revival 😆

@daviduglem3213 2 года назад

Another great video. Thanks for the relaxation Mortske. Unlike some of your contemporaries, you don't get pulled into the high dollar unaffordables.

@MortskeRepair 2 года назад

My pleasure!

@terryrose6208 3 года назад

Kroil is wonderful stuff. Best I've ever used.

@MortskeRepair 3 года назад

No complaints here!

@paulravitsky2898 3 года назад

"movin' on up to the East Side" was The Jeffersons.

@markarrivi298 3 года назад

Thats one of the reasons MORTSKE IS LOVED he always has a battery at avail

@robbleblanc 3 года назад

I feel like I could re-build a GM starter just from watching your shows. Lol 😆. Great one again bud👍🏻

@MortskeRepair 3 года назад

You should know how by now!

@TheBlazer1983 3 года назад

That look when the cylinder spits oil....

@josephpilosky4775 3 года назад

Was worried no Monday morning ! Thought I missed Monday lol hi duffy

@rickwaldren3633 3 года назад

I had a 73 chevy pickup C10 it would not quit

@rickwaldren3633 3 года назад

The only problem was after 375 thousand I had to keep tighting the damper pulley to much play but never flew off

@rickwaldren3633 3 года назад

Water in the engine means nothing change the oil and give her change th e hesdgasket later

@jackallen2251 2 года назад

Really was impressed with your skills not to mention your great humor, great video I really enjoyed it

@MortskeRepair 2 года назад

glad you enjoyed it Jack!

@andrewnardo1021 3 года назад

I’m a welder in a shop that builds annealing Furnaces and we have these massive fixture tables that we use to build the roofs. Whenever a guys boots start to wear and the steel toe shows through you sneak up while he’s on that table with his toes down and tack the toes of his boots down to the table real quick. We’ve also welded some tool boxes shut before (not nice boxes, just cheap carry boxes).

@jeffhill2089 3 года назад

Take the dodge short bed frame, the camaro clip, engine trans and rear and the 63 chevy cab and build your service truck.

@stucook8622 3 года назад

Movin on up was the Jefferson's 🐾

@MortskeRepair 3 года назад

My bad!

@MaxNafeHorsemanship 3 года назад

That's the same Snap-On that I have. Same problem too. Just change the Shrader valve in the adapter (the part you screw in the plug hole). Trivia, you can also get short adapters about the length of a plug. Compression reads higher with them.

@matthewshaw9078 3 года назад

Happy to see coldwarmotors got a small mention! Gotta love watching Scott and the guys work on some beaters

@xanderwhipple8067 3 года назад

Welcome to Starter Wars: Revenge of the Napa

@MortskeRepair 3 года назад

Haha that's a good one!

@richardphelan8414 3 года назад

This one was a killer ,this one would have been a push start guaranteed it would have run

@lochnessfox3441 3 года назад

Great effort and we love it all! Thanks for the entertainment!

@warrentinsley5490 2 года назад

Ya know...as I was sitting here watching you'se guys struggling with a stuck valve...I was thinking to myself...what I need is this vid interrupted with an advertisement for meerkats.....now my evening is complete

@MortskeRepair 2 года назад

Bahahaha

@WatchWesWork 3 года назад

40 hours later "it needs more work than we're willing to put in"... You really are going to lose the shop!

@MortskeRepair 3 года назад

After watching this over again I'm tempted to bring it it and try 24 volts, adjust some timing, maybe tow it around like all the experts recommend! Maybe that will boost compression!

@johnfranklin5277 3 года назад

@@MortskeRepair definitely think getting it to turn over faster is with a try!

@rsprockets7846 3 года назад

@@MortskeRepair shoot some 30 weight oil in cyl get bettter battery and new points condenser cap coil

@duanew8853 3 года назад

@@MortskeRepair please do another video on that truck. You and duff can't go down without a fight. That old truck has something about it. Bring it back to life mortske. Get the hamms ready lol or the pbr and give it another go.

@mdouglaswray 2 года назад

@@MortskeRepair Wait! Why didn't anyone think of this before! ....(wait for it) ...TURBO@@@@@!!!!!! VROOOM

@daveallen8824 3 года назад

How about for a Duff sticker, just get a picture of him taking a leak.

@THRASHMETALFUNRIFFS 3 года назад

Pooping is funnier?

@phillacy5545 Год назад

How did I miss this video? I wondered why you posted again on a Thursday and no snow. 😂 We still have plenty I'm Maine. Keep the good content coming Mortske

@MortskeRepair Год назад

Welcome back!

@mikenelson6539 3 года назад

"ding fries are done". You just won a new subscriber.

@markamcampbell6340 3 года назад

try some oil in the cylinder instead of the penetrating oil.

@billkerstein1637 3 года назад

Like 40 or 50 weight. Builds the compression longer. Put a new Schrader valve in your compression tester and open the throttle when compression testing. Keep the battery booster on to spin over faster. Lastly, if you had brakes tow it to start it in gear.

@jontrudell7529 3 года назад

Idk how you are able to find all these old Trucks. Where im from they hard to find & if you do, they want 6 to $8000 for a rusted up junker!

@MortskeRepair 3 года назад

I put a lot of miles on finding them!

@tom-ehill2713 3 года назад

Sorry it didn't start, but watching a video makes my day!

@bill3152 2 года назад

Around the 53min mark when it finally turns over and makes that old timey cartoon squeaky sound, I laughed out loud so hard. Keep up the good work!

@TylersNeighborhoodGarage 3 года назад

Pull it down the road with it in gear. That's how we started our '54 Chevy truck most of the time.

@MortskeRepair 3 года назад

The engine was too stiff, tires would just slide.

@deanstuder1775 2 года назад

Did you try it or just give up because because of what you thought about it. I think you still should try it. I would bet a dollar I could do it and I never bet. If it skids the tires you just grab a higher gear.

@eddiekerbo 2 года назад

I got excited when I saw those pistons move!! Right on!

@AndysDogHouse 3 года назад

Hey Mortske. Great video. Thanks for sharing.🍁👍👍

@j.walker3498 3 года назад

"Abandoned" "will it run" worn out as much as that engine is.

@robertmack7116 3 года назад

When the posted question is ‘Will it run?’, the answer must always be YES. Who wants to go this long when the answer is no?

@cjplol6589 3 года назад

It's a Chevy, of course it'll run. You'll lose the shop if it doesn't

@donaldlawton7384 Год назад

Socks work good on windows,lol! Thanks again Mortsky 👍

@thecollectoronthecorner7061 3 года назад

If its a stick shift I will pull the plugs and soak the cyls for a time. Might even pull the valve cover and check for stuck valves, Then before attempting to start it. Hook it to the wrecker and drag it down the highway with it in high gear. I go about a mile and turn around . Usually that limbers them up enough that they fire right up. Im like that Old Farm Junk 101 guy. I like to piddle around and get something running without spending money. once I hear it run and drive it a little. I just park it and let it be part of the hoard. Ive got stuff that Ran when parked . Drove to the spot where they are setting And havent been started in decades.

@angelitoedwards4495 3 года назад

Kinda reminds me of vice grip garage with all the fancy saying he has. 😆 glad I found this guy, and the 🐕 is awesome. I had a dog that loved to ride in everyone's car.

@MortskeRepair 3 года назад

Thanks 👍

@damiangillett1476 3 года назад

Pic of Duff, with a paw print and writing under Duff Approves !

@klint-jq5eg Год назад

So wierd watching someone work on something I used to own lol

@ironcladranchandforge7292 3 года назад

Oh come on, the hoods on the '60 and '61 were not obnoxious, LOL. I think they're cool. I have a restored '60 Chevy pickup, all original. It's a beauty !!

@MortskeRepair 3 года назад

To each their own! haha

@ironcladranchandforge7292 3 года назад

@@MortskeRepair -- LOL. Those hoods are harder to clean though. So many nooks and crannies.....

@maddoxlogging2303 3 года назад

Love the gmt400 crew cab. I was born in 91 so I can’t own enough of them. I’ve got 3 so far😬😆

@mike7167 3 года назад

Hi that thing you found in cubby is if you turn a spacer on a lathe it cleans the burrs off

@jackzeilsdorff3164 2 года назад

That dash with gauges is an option too.. those were my favorite year. Tough to find a clean one in custom cab with a big back window

@roberthanks4626 Год назад

I learned this 40 years ago. Standard transmission fluid will ignite in a cylinder. Pour it in the carb as you crank the engine it will bring the compression up and start and run on it. When you stop pouring the trans fluid if it stops after the fluid is all you have a fuel delivery problem or it needs timing chain.

@easttexastramps 3 года назад

it's a good day when puddin' and mortske release videos an hour apart! haven't watch either yet, busy watching fitzee!

@arevee9429 3 года назад

Puddin' does videos? Who knew? He can't possibly be as entertaining as Mortske.

@keithharden7844 2 года назад

@@arevee9429 Actually, he is very entertaining.

@donaldlawton7384 3 года назад

I put a cap full in my fuel on my 1960's b110 alles chalmers garden tractor .i haven't had the carb off in over 18 yrs. Its great carb preservative 👍🏻👍🏻

@diddledeedeepotatoes4213 3 года назад

My dad used to have a Chevy 3800 it had I think the same engine as this truck it was such a beautiful car metallic gold with a white top great interior, man I miss that car. Its seats felt like sofas it was so comfy.

@boblamb8421 3 года назад

Great video with Duff as always. Great tee shirt by the way. Cool you have all the NOS stuff and a vintage Checker/Shucks/Kragen points set with the little capsule full of grease for the distributor cams. Back in the 70's they even sold reconditioned spark plugs and recycled oil. A brand here was called 'Rev'. Even with the low compression if it was spinning faster I'll bet it would start. It needs to burn off all the oil and blaster that is fouling the plugs but you are right nothing would fix it better than a 350 under the hood.

@MortskeRepair 3 года назад

Thanks Bob!

@justthes7093 2 года назад

I’m regretting working so hard all summer. So many videos to catch up on. Hate working on stuff but watching I learn things and get to hear flat heads sometimes…… dozen high life’s you’re a funny guy.

@MortskeRepair 2 года назад

You got all winter to catch up!

@frequencyfluxfandango8504 3 года назад

i Like you man. You have a good way of explaining what's-what. You're one of these great channels that has made me the realisation that I enoy watching this stuff -at all. Now I look forward to these challenging new projects with Excitement ! Good Goinng Mr Mortske, It's very interesting to see how it's all done.. Cheers

@MortskeRepair 3 года назад

Thanks for watching and for the kind words!

@crewsjerry 3 года назад

I sat and watched the whole thing. A boat ancher when you pulled it in.

@sonnydee4736 Год назад

My hats off to ya for all the effort to hear it run👍 sure enjoy all your videos

@MortskeRepair Год назад

Awesome thank you!

@79tazman 3 года назад

I use to push start vehicles that had low compression and get it running and usually with the engine hot the compression would go up as the rings start loosening up