1996-2000 Honda Civic spark plugs replacement

Подписаться 80 тыс.

Просмотров 149 тыс.

50% 1

Here we are doing a 1997 Honda Civic Spark plugs replacement, its pretty straight forward.
Tools:
amzn.to/2awcRDO 3/8 ratchet
amzn.to/2awd6P5 3/8 10mm socket
amzn.to/2aJy9kF 3/8 3" extension
amzn.to/2b47h1x 5/8 spark plug socket
amzn.to/2aE11KN Spark plugs 3M anti seize lube
amzn.to/2aCVoJz Ignition coil 3M Die electric grease
Parts:
amzn.to/2b775yA NGK or Denso spark plugs
Torque specs:
amzn.to/2aDZqER 3/8 Torque wrench
14 ft. lbs - spark plugs
like and share this video!
If you have any questions or concerns, feel free to leave comments on our FB page.
Like us on Facebook
bit.ly/nutzaboutbolts1
and SUBSCRIBE!
bit.ly/NutzAboutBolts2
Intro: RavenProDesign
www.RavenProDesign.com
Music: Manic Bloom - Death and Conversation
/ manicbloom

Авто/Мото

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 116

@leslie1370 7 лет назад

Thanks for your step by step tutorial, I am actually proud of myself for doing it myself without a man's help, 😱😊, honestly tx!!!

@NutzAboutBolts 7 лет назад

nice! congrats on getting your hands dirty with this maintenance :)

@leslie1370 7 лет назад

NutzAboutBolts I subscribed I can't wait for my next project, good looks!!!

@NutzAboutBolts 7 лет назад

we appreciate that! thank you! :)

@s.israel 6 лет назад

Leslie I want to do it myself, Im just scaredd....

@ladygodiva813 5 лет назад

@@s.israel same

@TheGodFactory 4 года назад

Instead of dielectric grease can you use battery terminal protection sprat?

@lRAY94l 5 лет назад

Do u know where I can purchase the stickers that are under your hood ?

@Vega-nn4gn 2 года назад

Do you know the wire order ex(1,2,3,4) on the distributor I gotta put new wires but my old ones are off already

@andrewaycock696 7 лет назад

Thank you!! With your help, just did this myself for the first time. Much appreciated!

@NutzAboutBolts 7 лет назад

nice!

@angelgarcias7328 3 года назад

Got 1997 honda civic ex got the number spart plug like you much cost the orijinal for the car can buy it thank you video where got it

@paulrakoczy5307 7 лет назад

Great job man, thanks!

@joelgonzalez3201 Год назад

what if the connecter did break inside ? how can i get it out

@dannymartinez4177 7 лет назад

Hello, I have the stock spark plugs about 32k miles on it and wires too how often should i change them?

@NutzAboutBolts 7 лет назад

60k miles you should change it because its copper plugs, I would just change it since its been a long time.

@qjap8884 Год назад

Does this work for the SI of this generation?

@jordynperez101 7 лет назад

is that all you need to do for a tune up i just got an oil change and passed inspection. anyone know?

@antonyfarfan6037 7 лет назад

greg Perez i know this is late but you should be good bro maybe replace or clean your air filter or check your timing you're fine tho

@AquaticTux 3 года назад

I'd say pull your evap out, ofc only if you don't have to pass an emissions test

@adamplus2508 6 лет назад

He didn't even mark the spark plug wires and number them just to avoid confusion. Even if he knows it's still a good habit to get into especially if you're showing someone else

@Sergiovsousa 4 года назад

My Civic as each cable numbered 1 to 4, so I guess the same happens to every factory Civic.

@vernrambo 6 лет назад

Do you still have this Civic?

@stevenevangelist5221 2 года назад

Auto Zone girl sold me Bosch. Came up missfire on the diagnostic. Now putting NKG in.

@ONeal397 7 лет назад

How about a timing belt and water pump video? :D

@christophern7921 3 года назад

(Chris fix it) did multiple fix for car start. For a 1990s Honda Civic. You should check it out

@ONeal397 3 года назад

@@christophern7921 I watch him too

@jp1rd961 4 года назад

Please next time show in from of camera name about marc and numbers about tools. For example : key # 14, and battery cleaner galon in from camera, thank you for video 🤗

@hackon5105 7 лет назад

which spark plugs you"ve used in this video ?? and i have honda city 2001 make so i just want to change my spark plugs and i am really much confused in this case that which one should i go for NGK or DENSO or BOSCH ? suggest me the best spark plugs for honda city 2001

@NutzAboutBolts 7 лет назад

NGK or Denso, they're OEM.

@mrmicai23 7 лет назад

Syed Hassan ngk

@gerryurbe4175 5 лет назад

Honda cars use only NGK brand

@frankenelimtangco2400 6 лет назад

Is it okay to use a 1/2 inch drive torque wrench on replacing a spark plug with proper setting? Or i must buy a 3/8 inch drive or other torque wrench?

@NutzAboutBolts 6 лет назад

The 1/2 torque wrench has too much torque. Spark plugs are 14 ft lbs of torque so a 3/8 torque wrench is good for it.

@frankenelimtangco2400 6 лет назад

NutzAboutBolts thank you sir!

@losjr4571 5 лет назад

How can I tell when the spark plugs are tight enough?

@NutzAboutBolts 5 лет назад

los jr use a torque wrench, you can also feel the washer being crushed into the aluminum head.

@thimble288 3 года назад

The ngk box has a little tightening guide on it. You can't lose!

@tsurisabkov3391 6 лет назад

Is there any chance of damaging the cylinders or the engine if I change my spark plugs without using the anti-size and the silicone paste?

@lawrencedavidson6195 2 года назад

I have never used either and my Civic is 27yrs old.

@AkinaGod 5 лет назад

I am having a problem pulling the plugs. I have the correct size for the plugs, but my sockets don't fit. None of them. There is an extra little metal sleeve inside the spark plug hole that prevents me from putting in the socket. Anyone know why or how to fix this? I can't pull the sleeve out or anything. Also tried a 14mm, a 16mm, and now I'm looking for a thin wall socket, but am having an issue locating one locally.

@NutzAboutBolts 5 лет назад

You can use a 5/8 socket without the sleeve to break it loose, then use the one with the sleeve to pull the spark plug out

@charlesbrown205 5 лет назад

I SECOND THAT! WTH? My Craftsman spark plug sockets are too fat to fit. I had to buy a Snap-On socket that cost more than my car is worth, but it FITS. The excellent dude in the video is using Snap-On tools and skilz. Thanks NutzAboutBolts - Subscribed.

@Spiderman519 7 лет назад

Just watched your video what gap size did you use on the spark plugs? Please let me know.. I bought ngk also and they were gapped at .035 shouldn't they be at .040?

@NutzAboutBolts 7 лет назад

0.039-0.043 in (1.0-1.1mm)

@Spiderman519 7 лет назад

NutzAboutBolts thank you

@randomrandy3059 5 лет назад

What if you don’t have any lube or silicone paste

@randomrandy3059 5 лет назад

Some came with the spark plugs and i didn’t even realize it.

@nathanbeckom912 4 года назад

You’re suppose to do them one by one because if you put the wrong hose on a spark plug the car runs different, saying because the distributor powers those hoses

@thimble288 3 года назад

Almost impossible with the d series wires, they're all cut to length

@tomchien7692 2 года назад

Why is spark plug replacement recommended at 30 k mi / 2 yr. for 1996-2000 Honda Civics by the owners manual? I thought most vehicles' spark replacement is recommended at 100-120 k mi. Is it because the manual is assuming factory plugs that may be copper (vs. iridium)? Do these vehicles run hotter / dirtier or something?

@NutzAboutBolts 2 года назад

Yes, copper is different from iridium tips, so it wears out quicker. These vehicles equipped with copper as oem. Newer models are iridium plugs.

@tomchien7692 2 года назад

@@NutzAboutBolts Thx! So, if replaced them with iridium plugs, should I be safe to use them for closer to 100 k mi, assuming I don't notice any bad spark plug symptoms in the meantime?

@NutzAboutBolts 2 года назад

@@tomchien7692 I’d stick with copper plugs. It’s runs better for your car since it’s oem.

@socialkruption 2 месяца назад

Dam RU-vid unsubbed me since I use your videos are a reference. Time to get the Y8 maintenance up and running.

@zeod89 5 лет назад

How do you know when they’re tight enough if you don’t have a torque wrench? When they’re snuggly tight or? Lmk man thanks

@pushhrodd01 5 лет назад

Get an extension bro and put the plug in and then hand tighten it with the extension as hard as you can win the hand bc your hand doesent out out much torque. Then get a wrench and only go 1/4 of a turn!!! Remember torque wrenches are cheap and new heads are not

@zeod89 5 лет назад

TimeGhosts thanks for the input man I changed them for the first time Saturday, I did basically what you said, tightened them as by hand till I felt the resistance of them sitting flush then I did a 2/3 turn as the recommendation on the box ran it for 2 hrs that day and went to work this morning so I hope I’m good.

@christianmartindale9973 4 года назад

What happens if you do break it off cause I tried to replace them with the wires and it's just not starting now. Is it something to do with the distributer

@honsokuinkgoods6867 4 года назад

Get new spark plugs

@bigblackcl0ck 5 лет назад

is it special wrench for sparks ? how is it able to lift it from dat hole?

@caseyrobinette805 5 лет назад

Magnetic. Auto zone sells em.

@bigblackcl0ck 5 лет назад

@@caseyrobinette805 tnx for reply:p

@ParallelGamingReality 4 года назад

Had to chisel my plug wires off.

@jp1rd961 4 года назад

1:02 camera more near please

@Ace-44 2 года назад

I just took tried to take my spark plug wire off and the top part disconnected from the long part thats connected to spark plug. Does that happen sometimes or do I have a problem?

@NutzAboutBolts 2 года назад

It happens over time since it’s made out of rubber. When we change the spark plugs, we recommend changing out the wires out as well. It’s recommended to change out spark plugs, wires and plugs if your vehicle has a distributor.

@Ace-44 2 года назад

@@NutzAboutBolts Oh ok thanks for the quick reply man! Really appreciate it. It scared me so I put the the top part back on and closed the hood lol. I'll go back at it when I calm down lol.

@NutzAboutBolts 2 года назад

@@Ace-44 lol you might need a needle nose plier to pull the tube out if it’s stuck on the spark plug

@Ace-44 2 года назад

@@NutzAboutBolts I finally did this job thanks so much for your video! I torqued it down to 18 ft lbs instead of 14. I went by the numbers on the box. You think I should back them out and do it to 14 or is 18 ok?

@americanroadwarrior 6 лет назад

I'm looking into the two 3M products shown and they seem to be the same product in two different containers. Am I trippin'?

@NutzAboutBolts 6 лет назад

nope, there are 2 different 3M product. One is Anti-seize for the spark plug threads, and the other is a silicone paste for the ignition coil tip where you insert into the spark plug.

@americanroadwarrior 6 лет назад

What threw me off is that they both come up on ebay as "3M 8946". I can see by the labels you are correct. Great video, Thanks

@americanroadwarrior 6 лет назад

So as I usually do, I cheaped out by spending $5.68 on an "AGS SPARK PLUG ANTI-SEIZE Grease Lubricant Stick" and paid $4.99 for 3 "AGS High Energy Dielectric Silicone Grease/Lockout Moisture" packets. Thank you NutzAboutBolts, I didn't even know these things existed.

@U812GREEN 5 лет назад

Great video but you need to gap all plugs except perma gap plug

@BamaChad-W4CHD 4 года назад

You buy pregapped plugs. Most people would never buy plugs that need to be gapped. We aren't talking about high performance engines here. Just standard everyday cars should always have pregapped plugs. Of course you always check each plug and make sure the gap is correct though.

@U812GREEN 4 года назад

@@BamaChad-W4CHD Isn't that what I said?

@BamaChad-W4CHD 4 года назад

@@U812GREEN it looks like by you saying"you need to gap all plugs" that you are saying you need to gap plugs yourself when they are already gapped off the shelf. My bad if it isn't what you tried to say.

@U812GREEN 4 года назад

@@BamaChad-W4CHD If your going to check them just gap them. Can't trust because they are new, I've replaced many faulty new parts is all I'm saying, plus my original comment was a year ago. Not trying to be a dick

@BamaChad-W4CHD 4 года назад

@@U812GREEN gotcha man. Sorry if I seemed to be a prick as well. We both said the same thing. You are very right. Always got to check for sure. Too many cheap things sold with very poor quality control

@erictech201 5 лет назад

you know why some times people break plugs they dont torque them lmao thats why they need to be torqued i never had any problems with my spark plugs removing them

@miltonespino40 5 лет назад

Please help me amigo.

@PHATT13_DADDY 8 лет назад

did you unhook the battery for this?

@NutzAboutBolts 8 лет назад

+teoti atutahi no, we didn't

@agielalfredantonio7228 3 года назад

How to get optimal sparkplug? 90s honda

@thimble288 3 года назад

NGK zfr5f-11

@agielalfredantonio7228 3 года назад

How to get rusty brown in sparkplug? My sparkplug is rich in gas

@tylerclark5086 3 года назад

You should be telling people to make sure they label or take a picture of the wires beforehand. Many folks will get confused.

@thimble288 3 года назад

These wires are the exact length to reach their respective holes, but on other cars yes

@Kushalien51_nv 2 года назад

Or 1 by 1

@brandonlogan2600 Год назад

you should do one wire and plug at a time

@NutzAboutBolts Год назад

They’re all different ignition wire length, there’s no way you can mix them up

@miltonespino40 5 лет назад

Ya cambie spark plug V power calibradas 1.1 or 44 . y mi honda sigue con el code p0300 random cylinder 1-2-3-4.

@King_Dan_Man 7 лет назад

Is the lube optional?

@NutzAboutBolts 7 лет назад

it is, but its in your best interest to lube it for future removal or else it might rust and be hard to remove the next time because there's no lube.

@pvtolentino 5 лет назад

What kind of lube again to buy and where exactly in thr spark plug to put it?

@MuaadElSharif 4 года назад

So it doesn't use spark coils?

@paulsmallriver6066 4 года назад

I think that is them on the ends of the wires.

@miltonespino40 5 лет назад

Hey amigo tengo un problema con mi honda civic hx 99 with code p0300 que es lo que pasa con mi honda civic

@wilsonvega6131 5 лет назад

Milton Espino p300 is a misfire

@fatLips4life 8 лет назад

I got a b16a2 vtec engine 1999. Will this work on that?

@NutzAboutBolts 8 лет назад

+fatLips4life its the same, the only difference is the top plastic cover you need to remove.

@MichaelWLam 7 лет назад

You used a torque wrench or no?

@NutzAboutBolts 7 лет назад

we recommend it for beginners, if you've done this before, then go by the feel.

@mushy18100 6 лет назад

I would

@MrBIGSTUFFtv 2 года назад

What’s

@DELREYGUY Год назад

Per NGK. Never use anti-seize on the plug threads. NGK Plugs already have a factory coating to prevent it. You can make it actually seize with that extra coating. FYI

@NutzAboutBolts Год назад

Some has them, some I don’t see they have them, never heard of extra coating causing seizing. Nothing a breaker bar can’t remove. 👍🏼