Тёмный

1997 - 2001 HONDA CR-V RD1 REAR DIFFERENTIAL REPLACEMENT 

The Honda Resource
Подписаться 39 тыс.
Просмотров 51 тыс.
50% 1

Опубликовано:

 

1 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 92   
@cri8tor
@cri8tor 3 года назад
I can't tell you enough how much your work is appreciated. Another "thumbs" up! Cheers
@henrygregson7520
@henrygregson7520 Год назад
Hi there, I have a 1999 automatic CRV that needs a rear diff replacement. Only ones I can find on ebay are from manual CRVs, can I replace my diff from my auto with the diff from a manual? same generation of car of course. Thanks so much
@phillipkalaveras1725
@phillipkalaveras1725 5 месяцев назад
The differential was fine and did not need replacing. You found the real problem at 1:45 but since you do not know what you are doing you did not know it. It's called the "rear differential damper" and that's all it needed. Also, you can only use Genuine Honda Dual Pump Fluid in a Honda PERIOD.
@hondaresource
@hondaresource 5 месяцев назад
🤣🤣🤣🤣toss that damper on the trash, it's not needed. I'm aware of what fluid goes in it.
@nate35828
@nate35828 3 года назад
12:23 he knows most people that are about to do this do not have a impact so he’s showing off
@hondaresource
@hondaresource 3 года назад
Funny enough, I rarely ever use air tools anymore. Electric tools are so much nicer on the ears.
@markkramer2401
@markkramer2401 5 лет назад
Make sure you use new crush washers on the drain/fill plugs, and burnish the clutch after changing diff fluid. I would also recommend putting the lug nuts back on the studs if you're swinging a hammer to prevent thread damage, that way you can use a mini sledge vs a mallet.
@lowellgrimm6934
@lowellgrimm6934 3 года назад
What if you have burnished and changed fluid but still acts like plates are sticking together bad catching and releasing to the point you about can't give it gas motor won't over power it either
@lowellgrimm6934
@lowellgrimm6934 3 года назад
1999 honda crv
@eldinwebster2155
@eldinwebster2155 Год назад
The fluid in my deferential (1999..CR-V) looks like Coffee with Cream (lite Mocha) coming out. I have changed it twice. Can water get into it. What is my problem? I got lots of noise too.
@hondaresource
@hondaresource Год назад
Maybe if you are putting it in deep water
@samueldeleon5036
@samueldeleon5036 5 лет назад
You should’ve flushed the differential fluid a few times before replacing.. the fluid has to be from Honda to silence the humming when driving
@hondaresource
@hondaresource 5 лет назад
I always use Honda dual pump fluid. The recommended method is drain and refill.
@derekwilson8011
@derekwilson8011 3 года назад
Will changing the fluid stop the howling when vehicle speed increases or can you rebuild it with all new bearings or is it easier just to get a whole new one
@hondaresource
@hondaresource 3 года назад
Usually if it's not worn out, the howling stops with fresh fluid.
@pgg3911
@pgg3911 4 года назад
Good visuals, thanks for uploading. Keep up the good work.
@akllls617
@akllls617 3 года назад
I noticed you just threw it on? No new seals no nothing ? Did the differential have any trouble or was it fine the way it was ? I ask because I’m getting a used differential and I’m wondering if going over would be overkill
@hondaresource
@hondaresource 3 года назад
This one worked perfectly. As long as the seals on the one you're installing aren't hard or torn I would leave them alone!
@akllls617
@akllls617 3 года назад
@@hondaresource Thanks ! I'll keep that in mind really appreciate the quick reply
@stanleytolle416
@stanleytolle416 Год назад
That part you took off at 355. What is this part, what does it do and do you really need it. Mine has this same part worn out like yours. Replace it or trash it?
@DavidJames-ev9qo
@DavidJames-ev9qo 3 года назад
Do you think I can replace those two mount bushings without taking it all apart?
@hondaresource
@hondaresource 3 года назад
Probably so
@rachelblack3816
@rachelblack3816 7 месяцев назад
A work light would have helped the audience see what was being done.
@hondaresource
@hondaresource 7 месяцев назад
Sorry, I've improved
@davejjons3631
@davejjons3631 3 года назад
I have a car of CR-V RD1 Honda. The 2 wheel at the back are bit lay . How can we straighten up?
@BenjaminHansen
@BenjaminHansen Год назад
I really appreciated you making that video. Thank you!!
@chiphum
@chiphum 6 лет назад
Thanks, used this to fix my Element
@DAV4WSR1
@DAV4WSR1 Год назад
thank's for mounting advice
@bushmaster2936
@bushmaster2936 2 года назад
Hello, was this an automatic or a standard transmission CRV, please? Nice video. Wish I had a lift !!!
@hondaresource
@hondaresource 2 года назад
The automatic and manual share the same rear diff.
@a145844TAIWAN
@a145844TAIWAN 3 года назад
A little problem about spacer want to clarify . Have anyone try to install the spacer on rear wheel only on CRV rd1,Did that cause any problem or damaged to the differential work due to drive? I am planning to install a pair of 15mm spacer on rear wheel of my CRV rd1 so really want to clarify this matter.
@hondaresource
@hondaresource 3 года назад
spacer has nothing to do with the differential. If anything it may put just a little more stress on the wheel bearing. 15mm is pretty minimal for a spacer.
@garygoldman2835
@garygoldman2835 4 года назад
How can I tell if my rear differential has gone bad? You mentioned clunking noise. My drive shaft continues to spin while in drive gear with my foot of the brake pedal. Yes, makes a clunking noise while driving and continues to roll while in Park gear. Has 268K miles on the car. Thanks Gary
@hondaresource
@hondaresource 4 года назад
Usually if the diff is bad it'll pop. Some whining in a tight turn is normal.
@millcitychris4303
@millcitychris4303 3 года назад
My diff plate needs bushing on my 06 crv. What should i do??? Find new bushing or try to find the diff plate with the new bushing already in
@hondaresource
@hondaresource 3 года назад
The bushing are replaceable and available through Honda
@millcitychris4303
@millcitychris4303 3 года назад
@@hondaresource sooooooo dont buy the cheap ebay brand????
@hondaresource
@hondaresource 3 года назад
@@millcitychris4303 you can
@1davidbaugher
@1davidbaugher Год назад
Thanks for the video helps out alot
@terrellaudinett5786
@terrellaudinett5786 Год назад
Hey I have a problem I started hearing a grinding noise from my differential I took off the shift and to eliminate the differential when I put the car in drive it wouldn't move do you have any advice, do I have to take off the differential for the car to move? It's a 1999 honda crv
@hondaresource
@hondaresource Год назад
I would check your front axles to make sure they are both good. If one is broken and you remove the driveshaft, it wont move.
@terrellaudinett5786
@terrellaudinett5786 Год назад
@@hondaresource thank you
@DavidJames-ev9qo
@DavidJames-ev9qo 3 года назад
I found out I also need a driveshaft. Do you know if the driveshaft is the same part for an automatic or manual transmission?
@hondaresource
@hondaresource 3 года назад
Yes, it is.
@thevibes67
@thevibes67 4 года назад
Awesome video. QQ..if you need to replace just the rubber rear differential mount, is it as easy as replacing the the damper that's attached to it??
@hondaresource
@hondaresource 4 года назад
Yeah should be
@biocamino_ezequiel
@biocamino_ezequiel Год назад
Nice video bro! Question: i have a 97 crv and my user manual says to use atf fluid to rear differential but you use dual pump fluid, do you know this difference? Both work?
@prescientoracle6335
@prescientoracle6335 9 месяцев назад
It's probably too late, but use DPF II. The manual can help a lot, but with my experience, it is not exactly accurate s lot of the time. Example: I changed out my CV axle and hub assembly, and the spindle nut alone was labeled 24mm, when it was 36mm. You should always look up other people's experiences when working on your vehicle.
@biocamino_ezequiel
@biocamino_ezequiel 9 месяцев назад
Thanks for the advice. At the end I could get Acura diff fluid to use ❤
@LatinoAD
@LatinoAD 2 года назад
29k watched this darn lol.💯
@hondaresource
@hondaresource 2 года назад
back before I actually recorded for youtube. I think I recorded this on snapchat story the downloaded the story, then posted the video to youtube.
@LatinoAD
@LatinoAD 2 года назад
@@hondaresource crazy. You should have started doing videos yrs ago. 😔 oh well.
@hondaresource
@hondaresource 2 года назад
@@LatinoAD exactly. Who knows where I would be by now🤣
@willbroccolo8389
@willbroccolo8389 2 года назад
flip that scree bro
@hondaresource
@hondaresource 2 года назад
That was before I "did RU-vid". I think that was all recorded on Snapchat story.
@ElReySupr3me
@ElReySupr3me 3 года назад
Probably an element rear diff since those bite like a mf compared to the 1st gen crv rear diff.
@hondaresource
@hondaresource 3 года назад
2nd gen crv is better than 1st gen too
@ElReySupr3me
@ElReySupr3me 3 года назад
@@hondaresource any of those r better then the 1st gen diff lol
@timborice22
@timborice22 2 года назад
Do 2nd gen and element diffs line up and have the same spline count for the 3 shafts?? I actually just noticed a rotating clicking noise under the center or near the rear upon load at lower speeds low rpm. Driveshaft or diff, I don't know yet 🤷
@matthewl2260
@matthewl2260 6 лет назад
Great video! Why not replace the upper mount bushings? It appeared cracked.
@hondaresource
@hondaresource 6 лет назад
Customer didn't want to spend any more money.
@derekwilson8011
@derekwilson8011 3 года назад
I have a 97 Honda CRV also I'm taking differential out for good how do I make axle stubs that are rear drive shafts
@hondaresource
@hondaresource 3 года назад
Just get some from the junkyard out of a fwd model
@derekwilson8011
@derekwilson8011 3 года назад
What about gutting my rear axles and use them as a axle stub to support wheel bearing have I seen this before done
@hondaresource
@hondaresource 3 года назад
@@derekwilson8011 you can also do that
@derekwilson8011
@derekwilson8011 3 года назад
Ok thanks again
@derekwilson8011
@derekwilson8011 Год назад
I'm removing rear end in my '97 can I use rear axle for stub to bolt wheel back on after I got the drive shaft if that's possible
@kevinmunger5616
@kevinmunger5616 6 лет назад
How about just replacing a rear axle shaft? Still have to remove the 3rd member? Thanks!
@hondaresource
@hondaresource 6 лет назад
if you are just replacing the cv shaft, you can just removed the lower control arm and the spindle will swing out far enough to get the axle out
@danielsmith6539
@danielsmith6539 3 года назад
How can i tell if i need to just replace the fluid or replace the diff? Mine was making a grinding noise in the back upon acceleration?
@hondaresource
@hondaresource 3 года назад
generally, grinding or popping = replace. A whine when it engages = fluid
@danielsmith6539
@danielsmith6539 3 года назад
@@hondaresource ok thanks how much power steering fluid is needed I need to refill mine
@hondaresource
@hondaresource 3 года назад
@@danielsmith6539 it takes dual pump fluid, 1.2 quarts I believe
@danielsmith6539
@danielsmith6539 3 года назад
@@hondaresource i know for the diff fluid i was wondering how much I would need when I change the power steering fluid just got a crv so trying to do as much as i can
@hondaresource
@hondaresource 3 года назад
@@danielsmith6539 I don't honestly know the total capacity right off. I generally buy my Honda PS fluid at O'Reilly's since they are the only place I've found that carries quart size containers.
@moecashsmith
@moecashsmith 3 года назад
What size rim an tire in pic in thumbnail
@hondaresource
@hondaresource 3 года назад
Honestly I don't remember. It's been about 5 years since I owned that one
@moecashsmith
@moecashsmith 3 года назад
@@hondaresource ok thanks
@KevinMLloyd
@KevinMLloyd 4 года назад
Thanks for the video. Makes perfect sense
@hondaresource
@hondaresource 4 года назад
Glad it was helpful!
@9kb20vtec
@9kb20vtec 3 года назад
What lift is that ?
@hondaresource
@hondaresource 3 года назад
Bendpak 6xp
@dunerockski
@dunerockski 2 года назад
How can I delete the rear with out dying lol
@hondaresource
@hondaresource 2 года назад
So you just want to make it FWD?
@j_r_-
@j_r_- 2 года назад
@@hondaresource Does anything bad happen if we remove rear diff and use as front wheel drive only?
@hondaresource
@hondaresource 2 года назад
@@j_r_- no, just make sure you put some axle subs in the rear hubs.
@jasonsahadeo5740
@jasonsahadeo5740 2 года назад
@@hondaresource what would happen if I didn't? I live in the Caribbean so it's impossible to find parts like that (no junk yards).
@Jonova-re7xh
@Jonova-re7xh 2 года назад
Good job
@hondaresource
@hondaresource 2 года назад
Thank you
@joshuacarney2163
@joshuacarney2163 4 года назад
Hey kind of new to youre page. I've been having problems replacing my slave cylinder and liked the way you explained the valve cover replacement. Can you do a video on how to replace a slave cylinder for a first gen crv 5spd manual awd? P.s. nice work on the awd civic!!!
@hondaresource
@hondaresource 4 года назад
There is a video on my channel of me doing it on a prelude. The process is very similar. Manual Crv's are pretty rare around here.
@brandonclarke9094
@brandonclarke9094 4 года назад
Very reassuring. Quick paint job and I’ll have to throw mine in. You seem to be a pretty solid guy.
Далее
Replacing Rear differential bushings
19:08
Просмотров 11 тыс.
honda cr v rear disc brake conversion
43:58
Просмотров 52 тыс.
Most Common Problems: 1997 - 2001 Honda CRV RD1 RD2
10:47
2001 Honda CR V Rear Differential Fluid Change
4:39
Просмотров 20 тыс.
97-01 Honda CRV Transmission removal AT HOME!
14:00
Просмотров 137 тыс.