No video :(

1998 Chevy K1500 Erratic Gas/Fuel Gauge

Подписаться 11 тыс.

Просмотров 48 тыс.

50% 1

This video is on a 1998 Chevy K 1500 with a erratic gas/fuel gauge the bounces and does not read correctly. I take you through the full process of removing the gauge cluster and removing the gas gauge driver motor and spray silicone spray in the driver motor to clean it up and also lube it up by doing this it improved the gas needle reading tremendously and was working correctly for two years until we sold the truck. I hope this will help you in your gas/fuel gauge repair on any mid 90s Chevy vehicle. Thanks for watching check out my channel.
Silicone Spray
amzn.to/3qvz25U

Опубликовано:

4 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@CoinGYPSY 2 года назад

While I wanted to see the process of you disassembling the gauge itself, you had so much important information, that I didn't know I needed. Thank you so much 😊

@mikepoint4717 2 года назад

Thank you , I just bought a 99 Tahoe and the fuel gauge is erratic. I also thought it might be the fuel sending unit . I’ll try this first . Cheers stay safe

@jeepmanking3577 Год назад

Thanks for watching!!!!

@gdi9320 4 года назад

I bought a 1998 Suburban K1500 gasoline. Same issue with gas gauge buzzing. Plus needle shows past full when full and 1/2 when it's really empty. I'll try this in the summer. Thanks for the post.

@franciscogarcia3866 2 года назад

It looks like the ground on your fuel pump is the problem

@Jack-iv2rg Месяц назад

any update on what worked to fix this exact problem ?

@gdi9320 Месяц назад

@Jack-iv2rg I am sorry, I haven't got around to looking after this truck. It's been sitting for a while now and only drive it occasionally.

@ScullyBrewing Месяц назад

Same issue here, i wonder if the float on the pump is maybe on the fritz. Ive just resorted to the ole trip meter reset on every fill up

@johnward5890 2 года назад

I have a automotive scan tool that has a gauge alignment part for the gauges that is set in the ECM

@ByGiibby 22 дня назад

And it works with OBD1?

@johnward5890 17 дней назад

@@ByGiibby OBD2 but i have a adapter to use on OBD1 which needs a 12 volt power supply for my scanner to work on OBD1 I don't think they will control like the 1996 and newer OBD2 computers.

@ScullyBrewing Месяц назад

Think you have enough air fresheners? 😂 All jokes aside, does this only fix the shakiness of the needle or did they also have an issue where the needle doesnt go past the halfway point? Thats my main issue with my suburban. The needle does shake a little, but does read accurately until it reaches the halfway point where it stops.

@jeepmanking3577 Месяц назад

@@ScullyBrewing Indont know on the incorrect fuel tank reading, I would guess that is the gas tank sending unit causing that. lol on the freshness, my son thought it was funny and a conversation piece with his buddies.

@gabrielmanzanares9805 2 года назад

Awesome!! Thanks!!

@davidstrickland8988 2 месяца назад

You didn't show how you disassembled the gauge cluster

@jeepmanking3577 2 месяца назад

It’s really simple…

@anthonyjones2547 2 года назад

You can not swap them out for each other tho it will thru it all off

@damulch 3 года назад

i can't find info anywhere on this..maybe you can help but how exactly do you recalibrate the speedometer needle. You said you push it in to set it while using phone speedo but do you have to pull it out to move it to 20 and then push it? I need to do this but dont want to break it.

@jeepmanking3577 3 года назад

Slide a plastic fork under fuel needle to pop it off gauge cluster, use phone drive 20mph and then push fuel needle back on gauge cluster on the 20mph position.

@damulch 3 года назад

@@jeepmanking3577 nice..thank you!!!

@jeepmanking3577 3 года назад

Hope it helps, thanks for watching

@jeepmanking3577 3 года назад

Lol fuel needle, I should have said Speedo needle!!!

@brandonstennes4931 Год назад

The gauge motors are called air core stepper motor. Mine literally just started spinning in a circle when I went for a cruise.

@mattuk1310 2 года назад

today i'm playing w/ my fuel gauge(1998) in the dash went to pic n pull and picked up a couple air core motors... now finding the 3 i picked up are all spinning to freely ( no drag / damping fluid to slow them down) just spin freely... My question is does anyone know if the all 4 of the air core motor. in a 95-99 trucks are the same...or can i only use the fuel one for fuel oil for oil...ect.....tia

@jeepmanking3577 2 года назад

That’s a good question, but I can’t answer that one. Does the motor have a number on the case? If so this may help to compare to the ones that came out of yours.

@mattuk1310 2 года назад

@@jeepmanking3577 my original reads F37 09 28...These others i picked up read F 3G 08 20 , F 1G 15 66

@jeepmanking3577 2 года назад

Try googling the part number and see what comes up may help you. Just a thought

@julesgoulet7868 2 месяца назад

any update on this? is the gauge still working?

@jeepmanking3577 2 месяца назад

It worked for about a year and a half then my son sold his truck. Thanks for watching.

@julesgoulet7868 2 месяца назад

@@jeepmanking3577 I saw another video where they filled the motor with some kind of food grade silicon with a syringe. Your way looks easier. My only issue is my gauge reads empty when off and full when you start it, with the occasional trip back to empty.

@jeepmanking3577 2 месяца назад

@@julesgoulet7868 I think you may have a fuel sending unit issue or a ground in the wiring.

@cluewyatt172 Год назад

My obs will read "empty" but I'll still have 5 or 6 gallons left ...will this fix that issue?

@jeepmanking3577 Год назад

Does your gauge needle jump around? It might be the fuel sending unit in your tank.

@cluewyatt172 Год назад

@@jeepmanking3577 no it doesn't jump just clearly not reading correctly

@jeepmanking3577 Год назад

@@cluewyatt172 while filling the tank watch when the needle gets to the full mark. Then see how much more gas it takes for the nozzle to kick off. It could be worse you could run out of gas before you get to the empty mark. I would say it’s the sending unit in your tank. You could take needle off gauge and reposition so when it is on E it is empty.

@cluewyatt172 Год назад

@@jeepmanking3577 ty I'll try that

@user-pw5rd9mu5f Год назад

When fuel gauge is erratic is fuel sending unit , remove tank replace fuel pump assembly (around $200 ) replace fuel filter as well and problem solved

@corydunaway Год назад

Wrong. On these it's the stepper motor for the gauge. They dry out

@matthewwilloughby2594 10 месяцев назад

All you need is a magnet buddy

@jeepmanking3577 10 месяцев назад

Tell me more!!!

@ADRIAN65078 2 года назад

I have... what may be a dumb question. Do you think WD-40 will work?

@jeepmanking3577 2 года назад

I don’t know for sure, I just know WD-40 will leave a oily residue, when silicone spray will not.

@ADRIAN65078 2 года назад

@@jeepmanking3577 Thank you so much Good Sir!

@hanzelzxc 4 года назад

Show how you take that out of the cluster..

@jeepmanking3577 4 года назад

Angel Garcia it’s really simple, take bezel around gauges off four screws hold cluster in and take off connectors.. I would buy new step motors from eBay and install new ones fuel gauge started jumping around after a few months.

@craigmeek6026 2 года назад

Will this also work on the water temp. Gauge

@craigmeek6026 2 года назад

Well i watched the rest of the video and got My answer

@jeepmanking3577 2 года назад

Well I don’t know but they are very similar.

@chambliziOfficialChannel 3 года назад

Air core

@jjmax3400 4 года назад

Hi, has the fuel gauge been working correctly since making this video?

@jeepmanking3577 4 года назад

JJMax it’s not perfect but its a lot better. I believe the part is called a Step Motor..

@jeepmanking3577 4 года назад

JJMax It is called a stepper motor if it doesn’t work for you EBay sells them for about $40

@michaelroot6064 4 года назад

@@jeepmanking3577 my 98 s10 v6 fuel light comes on when tank is full will this make my truck shut off and think it's out of gas even though it has gas

@jeepmanking3577 4 года назад

Michael Root I am not familiar with that problem, this truck doesn’t have a light that comes on. Sorry not really a help on this one. Thanks for watching!!