1st Gen Ford Raptor Paddle Shifter Kit Installation

Подписаться 129

Просмотров 6 тыс.

50% 1

Attention: Please watch the Paddle Shifter Installation Tips and FAQ video on addition to this video before installing. There are a couple things have been brought to my attention after this video has been posted. The first is the red retaining clip on the steering wheel harness plug must be removed in order to add the three paddle shifter pins. The second is when drilling the mounting holes in the steering wheel start with smaller drill bits and work your way up to the finish diameter. It will make it a little bit easier. There’s layers of different materials and it can be difficult to drill the holes if you start with larger sized bits. A soldering iron also works well to melt clean holes into the steering wheel for the paddle shifter alignment studs to fit in. I apologize for not having these pieces of information filmed. Thank you all!
This is the installation video for my shifter kits. They are available for 2011-2014 Raptors. As well as 2011-2014 f150s that have the center console shifter with electronic gear controls.
Website is now available to order here frostbitefabrication.bigcarte...
Thank you so much everyone that helped make this possible.

Развлечения

Опубликовано:

20 фев 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@roberthaydenoz 2 месяца назад

A full year later and the shifters are awesome. Love the way you can up and down quickly without your hands leaving the wheel especially when in off road mode when you need immediate changes.

@MrAWorthy1 Месяц назад

Just ordered a set of red paddles for my 2013 FX4 Eboost. Definitely gonna use t-taps when I do mine. I’m scarred up from splicing the old school way with razors, screwdrivers and my teeth! 😅

@burningbarnavit 2 года назад

Can`t wait for my kit to show up!

@michaelreid2351 2 года назад

Great video! I feel for you. I have to battle for space in my shop against a never ending tide of baby stuff too!

@lukegerard9009 2 года назад

Thanks man! Before I start any garage project there’s always a good 30 minutes of cleaning up my daughters toys before I can get started lol.

@maximumoverland Год назад

Nice work man I can’t wait to get mine I just ordered a set of red ones

@lukegerard9009 Год назад

Thank you!

@cef21173 2 года назад

Great video! Can't wait till I get my set of shifters to install on my 2014...

@lukegerard9009 2 года назад

Thanks man!

@gurvinderbrar6422 2 года назад

Awesome video! Looking forward to receiving my set to install on my 2013..

@lukegerard9009 2 года назад

@@gurvinderbrar6422 thanks man, should get yours done this weekend!

@roberthaydenoz Год назад

Fitted mine today, amazing. Now to shift on the fly I dont have to feel around for the shifter switch.

@lukegerard9009 Год назад

Glad you like it man! Thank you for the feedback.

@208Concepts Год назад

I would assume the column shifted trucks have those pins in place already. If that's the case, it may be as simple as just tying into the harness all inside the column.

@roberthaydenoz Год назад

Pretty awesome. So in Drive, you can paddle select up or down, but how do you go back to Drive again. Do you just hold the paddle for a longer period and it defaults back to drive? Maybe you can do a real time drive video on this awesome mod. Here in Australia, many RHD conversion shops dont alter the shifter buttons when moving the steering wheel over. So off road you are left feeling around with your fingers for the up and down buttons instead of rocking them with your thumb where you can see them. This mod would fix that problem for good.

@lukegerard9009 Год назад

To allow access to all gears in drive after shifting with the paddles hold the + paddle(up shift) for 2 seconds and it will open all the gears back up again. Thanks man I didn’t realize that was an issue on the Australian trucks.

@The-Tactical-Plumber Год назад

I think I need this for my 13 platinum it would make better use of the spd turbo back tuner and cold air and turbo smart bov

@johnrichmond9972 2 года назад

Awesome instructional video. Very complete and simple. Question... Why did you cut and resplice the wires under the center console instead of just using piggy-back splicers?

@lukegerard9009 2 года назад

I contemplated both techniques but settled on the butt connectors because it provides a more secure and reliable connection at the splice. Since it’s signal wires we’re tapping in to and resistance can affect the overall outcome this seemed like the better option. Hope that answers your question man!

@johnrichmond9972 2 года назад

@@lukegerard9009 That makes sense. I'll do it your way. Thanks.

@pappaspoko 3 месяца назад

I really want to get this for my 2013 EcoBoost. But it’s a column shifter. I’m a pretty decent DIY’er by watching RU-vid videos but I’d never be able to figure out the wiring for it. I found this video from your site. By chance have an install video for the column shifters?

@omendez8344 Год назад

Will it work on a 2013 that has the buttons on the gear selector by the steering wheel

@lukegerard9009 3 месяца назад

Yes It does.

@atrianc15 Год назад

Did you paint the interior trim? How did you get the interior trim to be black?

@lukegerard9009 Год назад

Yeah I removed and refinished the interior trim panels when I first got the truck.

@gokartsoverhere8407 Год назад

Does it work on a normal f150 and does it work on a 2010

@AtlasWilder 9 месяцев назад

Not sure he knows I would email the company for more info. I just got a 2010 SVT 6.2 and I’m trying to figure this out now. Cheers!

@themachanic6416 Год назад

So if I bought the Raptor aftermarket steering wheel with the paddle sifter do you know if it would work with this kit

@lukegerard9009 Год назад

Not sure what steering wheel your referring to but it should.

@themachanic6416 Год назад

@@lukegerard9009 Im talking about a Gen 2 steering wheel

@lukegerard9009 Год назад

@@themachanic6416 the Gen 2 steering wheel already has paddle shifters on it so you won’t need my kits for that at all. You’ll be set in that regard if you go that route.

@themachanic6416 Год назад

@@lukegerard9009 I would not need your paddles but I would need the wire harness

@macmcguire5145 2 года назад

Can we get a video of the truck in motion running through the gears?

@lukegerard9009 2 года назад

I’m sure I could do that. Is there anything specific you’d like to see? As far as actually shifting through the gears it’s the same as using the +- rocker switch on the center console shifter

@joe3055 2 года назад

I’d be interested in seeing this as well. Seeing a demo of it in motion would validate that it’s fully functional and remove any doubts before purchasing one. It obviously works but seeing it in action while driving would seal the deal.

@lukegerard9009 2 года назад

@@joe3055 sounds good man, I’ll make it happen!

@davidcook8663 2 года назад

Also the 2nd gen raptors have an option to pull both paddles and have a quick neutral I guess for stop light revs 😎😎 can you do this with these?? Awesome kit by the will be purchasing very soon!!!

@Freakinfeeney 2 года назад

@@davidcook8663 this!!!! That would be awesome if we could do that!

@jonathantantillo5138 6 месяцев назад

how does one do this for a column shift?

@lukegerard9009 3 месяца назад

Instead of splicing into the factory Select Shift wires under the center console. You’ll splice into them behind the steering column. Everything else is the same.

@themachanic6416 5 месяцев назад

So now that you had them in for a year how are they?

@lukegerard9009 4 месяца назад

Still use them everyday and no issues yet.