Bought the same kit lights didn’t work the size wasn’t right they went it but damaged trying to lock them in place and the top one is smaller than the rest 🤷🏽♂️ so no go luckily they were cheap
Thank you for the tutorial video. I have XB05. My Dash lights& gear shift lights are both gone for a while and I was hoping if I try exactly like you did, I will have my dash lights back, but I didn’t have a luck…. (I’ve flipped the directions of new LED bulb like you did and tried a few times) If it’s not the bulb, what else could it be..? Does anyone has any idea? ( I’ve had a shop guy replace the light bulbs before but only one side were working and lasted only a month. I thought LED might work better but no luck.)
Order from ebay same exact knob with a plastic tube connected to it. when I tried pressuring it in there is no way it will fit hangs out 1 inch, the plastic tube kinda broke off a little now I can't return it 😅 😆🤣
they don't work it's no plug and play you have to widen the hole to make the bigger bulb fit and solder the connection due to the placement of contact on the bulb.
I dont have any loose LEDs but the video shows a close up of what it looks like. The base should be 10mm. You sometimes have to be patient with it and lightly push down as you turn.