2 stroke dirt bike build time lapse - Yamaha YZ250

Просмотров 2,9 млн

% 27 164

Hey guys, this is my complete dream Yamaha YZ250 2 stroke dirt bike build time lapse, check it out and let me know your feedback. This video is a final of YZ250 dirt bike build series with all the footage from the time I bought this dirt bike till the finish product and a testing with Dirt Bike Magazine. Let us know how you like our2 stroke dirt bike build, cheers!
Music by Trent Thompson ru-vid.com/show-UCjyM_NGuA5yYgjHzGfmFM0w
Dirt Bike Magazine story:
dirtbikemagazine.com/off-road-yz250-project-a-premix-video/
Direct Video Link
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HlDiW2SYvN4.html
YZ250 dirt bike build series playlist:
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HoZCkUS6sMI.html
Dirt N' Iron merch: www.dirtniron.com/shop
www.dirtniron.com/
dirtniron
dirtniron
Brought to you by:
Fly Racing
www.flyracing.com/
flyracingusa
FLYRacing/
Factory Links
shopfactorylinks.com/
factory.links
factorylinks...
Yamaha YZ250 dirt bike build details:
Wrench Rabbit
www.wrenchrabbit.com
Full Hot Rods bottom-end kit with gaskets and bearings
Vertex High Compression Complete Piston kit (ring, pin and clips)

FMF Racing
www.fmfracing.com
Gnarly pipe
Turbinecore 2 silencer
Tom Morgan Racing
www.morganracingengines.com/
Head and Cylinder mods
Cometic Gasket
www.cometic.com
Top End gaskets
Supersprox
www.supersproxusa.com
Front Sprocket
Rear Stealth Sprocket
Gold Enduro Race Chain -G520-EXT-120
Race Tech
www.racetech.com
Suspension Re-Valve and set up
UFO Plastic
www.ufoplasticusa.com
Full plastic kit - restyle
IMS
www.imsproducts.com
Large Fuel Tank
DeCal Works
www.decalmx.com
Semi-Custom Graphics kit
Pre printed number plates backgrounds
Works Connection
www.worksconnection.com
Front & Rear brake caps
Rotating bar clamp
Steering stem nut
Rear Chain adjuster blocks
Hour meter
Oil cap
Air Caps
Brake lever
Clutch perch assembly

Dunlop Tire
www.dunlopmotorcycle.com
AT81 front 90/90-21
AT81 rear 120/90-18
Uni Filter
www.unifilter.com
Air Filter
Scar
www.scar-racing.com
Titanium Footpegs
Pro Moto Billet
www.promotobillet.com
Kick-It Kick stand
TM Designs
www.tmdesignworks.com
Rear Chain Guide and slider
Rear Disc Guard
Rear caliper guard

Hinson Clutch Components
www.hinsonracing.com
Full Clutch kit - Basket, Inner hub, Pressure plate and Fibers, steels and springs clutch kit and cover
MotoSeat
www.motoseat.com
Custom Cool seat cover
Motion Pro
www.motionpro.com
Throttle assembly

FLY Racing
www.flyracing.com
KTM bend bars
Enduro Engineering
www.enduroeng.com
Full Coverage hand guards
Tusk
www.tuskoffroad.com
Full Wheel Set
Front oversized Rotor
Rear Rotor
Rotor bolts
Sprocket bolts
Front and rear braided lines
Shifter
Rear brake pedal
Front and rear brake pads
Radiator hoses

Factory Links
shopfactorylinks.com
Linkage bearings kit
Swing arm bearings kit
Steering bearings kit
Shock bearings kit
All Balls Bearings
www.allballsracing.com/
Throttle cable
Clutch cable
Bullet Proof Designs
bulletproofdesigns.com/
Radiator guards

Boyesen
www.boyesen.com/
Supercooler Kit
Moto Tassinari
store.mototassinari.com/
V-force3 reed cage
Motoblasters
www.motoblasters.com
Hydroblasting and cerakoting
Smartcarb
technologyelevated.com/
Smart carb SC2
Fasst Company
www.fasstco.com/
Brake clevis
Brake return spring
AXP Racing
www.axp-racing.com/en/
Xstream skid plate
Lightspeed
www.lightspeedcarbon.com
Carbon ignition cover
Specbolt
specbolt.com
Full restoration bolt kit
P3 Carbon
p3carbon.com
Pipe guard - carbon
Frame grip tape
Yamaha yz250 2 stroke dirt bike build time lapse

Авто/Мото

Опубликовано:

19 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,5 тыс.

@zimbabweyouthoutdoors4613 2 года назад

I’m doing the same thing on my YZ250, it’s a 2006, it’s already been rebuilt once and has had multiple owners, I’ve had it for about a year and it is extremely crusty,I finally got enough money to do a basic rebuild, not as good as this but enough to make it like new, been at it for a few days now and I must say it is extremely therapeutic and as my first build, very satisfying and building self confidence in my mechanical skills

@dirtniron 2 года назад

right on brother, enjoy the process!!

@user-ty6kd8fe9h 2 года назад

2006 👍, that about 1993?)

@MM-ig1iv Год назад

we have yt.. we can completely rebuild anything if we want. lol

@crustydownunder 3 года назад

I used to ride a YZ490, back in my day. 17 tooth on the front, 34 tooth rear. Mostly fast track, but a lot of bush, and steep hills. I'm now 61 and ride a WR450F. I wish I was young again and still had my YZ490. The most fun you can have with your pants on. I loved the video, such a great job. The bike looks amazing. Well done.

@dirtniron 3 года назад

thanks a lot, glad you like it! I heard those old YZs were monsters

@crustydownunder 3 года назад

@@dirtniron I'd trade my new 450F for an 87 YZ490 any day of the week. They we monsters. The low down torque was so incredible. Yeah, they don't make em like that anymore, sadly. Cheers, Mate.

@cameronsienkiewicz6364 3 месяца назад

A 34 tooth rear sprocket?!?! Your 1st and 2nd gear must’ve been non existent .. I run a 14/48 on my 2012 XCF 250, and even that, my first gear gets me up to like 15 kmh in about 3-4 seconds .. most of the time, I don’t even use 1st and 2nd.. I just jump to third and be on my way lol

@crustydownunder 3 месяца назад

@@cameronsienkiewicz6364 Try dropping a few teeth on the rear, maybe try a 40 tooth, it'll make your bike much more rideable. Also, try a bigger jet in your carby. But not too much bigger. The best thing to do is buy about 5 jets, going up in size, and try them, until it starts spluttering, and flooding, then go back one size smaller. Bigger sprocket on the front, and smaller on the back give top end speed. So, my 1st gear was like a second gear with standard sprockets. It gave me a top end of about 110 MPH. It also gives you "longer gears", (more time in each gear). My bike was ported and polished, with larger jets. It was a beast, but just amazing to ride.

@Spoonz-x9k 3 года назад

i can only wish about having such a bike like that

@dirtniron 3 года назад

work hard Martin and good things will come your way

@zaza0929 3 года назад

okbetoing

@guus46 3 года назад

Work dude work a lot

@aarnetimlin4774 3 года назад

Me too

@bam-cb424 3 года назад

@jy2693 3 года назад

I have a love-hate relationship with tear down videos. On the one hand, I’m fascinated by taking something apart, finding a problem and then putting it back together better than when you started. However, on the other hand, I am deathly afraid of getting to the end of the project with a handful of bolts left over...

@dirtniron 3 года назад

haha, I hear you brother!

@64maxpower 3 года назад

There's nothing to be afraid of. Confidence in yourself will get you everywhere

@EarthSurferUSA 3 года назад

It's not scary. But to avoid the mistakes, I like to be sure I have everything I need for a rebuild, (all the new gaskets and everything), so after I tear it down and fix it, I could put it right back together with fresh memory. The probability of you forgetting something during the assembly goes up in direct proportion to the time between the tear down and the assembly, (unless you are very well organized and even made notes). Just do it, don't make the same mistake twice, and you will get good at it. It is not scary to find out you have forgotten something. But it could be scary if you ride it that way. :)

@EarthSurferUSA 3 года назад

To add, (just thought of this): If you are scared of doing something wrong that you put a good effort of thought into, (like building a bike), is it because you are scared of failure, or scared of learning? It is not scary. It is fun. :) Plus, it is opportunity. Don't be surprised that after you get good at something people want or need, that you can start your own business, and really enjoy the industry, (and the freedom of your great mind with your own business), we built. :)

@Giove83 3 года назад

Iv experienced that a few times so I can totally relate haha.

@gcm747 3 года назад

I love seeing these beautiful 2-strokes brought back to life better than the day they left the factory!

@dirtniron 3 года назад

Thanks, glad you see it that way!

@Tikkarifle 3 года назад

I got as far as the swingarm bearings going in and already thinking that this bike will feel amazing to ride. Lovely work men.

@coloradodirtbike5930 3 года назад

You got that yz250 for very cheap 👍 excellent work. All the cerakoted parts made the bike look really good. I appreciate you and your crew of friends that put this video and bike together. Always nice to see something older, cleaned, restored, and improved to better perform than when it was brand new from factory. Bike builds are some of the most satisfying videos in my honest opinion.

@dirtniron 3 года назад

thanks brother, glad you see it that way! bike builds are super satisfying, work on them and watch them as well

@emmanlabirua023 3 года назад

This is the most detailed video of a rebuild I’ve ever seen. I can’t even skip a second on your videos. Good job Dirt N’ Iron, your contents were awesome! Keep it up man, God bless!

@dirtniron 3 года назад

Glad you liked it! thanks a lot bro!

@christiami.perezcuri5071 3 года назад

Friend, you don't know how my reaction was when I saw such a magnificent reconstruction. Tears came from my eyes, because I have the same motorcycle (YAMAHA WR 250 2stroke version) and I have kept it for many years, still hoping to find the basic spare parts for the engine. I hope one day to restore my YAMAHA 2 STROKE with people as expert as you. Great job!

@dirtniron 3 года назад

thank you, glad you like it brother!

@wipperwil 3 года назад

totally LOVED the ride review component too! best 51mins of bike time i've spent in a LONG while! Especially liked the single track at the end. (East coaster here)

@dirtniron 3 года назад

Glad you enjoyed it! We have decent single tracks, but sometimes I wish I can ride real woods like you guys have in the east

@micahloscomb2522 2 года назад

No hate but I’m not a fan of that pipe guard

@dimitrispotamou6628 3 года назад

I have a 125 cc yamaha 2 stroke and this video helped me to learn more about it than I knew before

@dirtniron 3 года назад

cool, glad to hear that. thanks Dimitris

@DividedWeAllFall Год назад

This is honestly inspiring. Makes me want to get a little shop together and tinker with my own project in the afternoons/weekends. I pray one day soon I can make this happen. Bravo

@dirtyhooliganmx4337 3 года назад

I like the fact that you show how to pack the bearings a lot of people don't know how to great build video keep up the good work love the channel

@dirtniron 3 года назад

thanks a lot brother, appreciate it!

@tinanaude2986 3 года назад

Szzdv

@2AM_Nemu 2 года назад

I love watching and listening to these when I work on my bike keep up the good work looks great

@dirtniron 2 года назад

Glad you enjoy it! Thanks!

@matthewkrisowaty7053 3 года назад

Man did I love the build... I have built over 45 machines now.. and I always admire a well done build.. watching the way your bike was done is how I do things.. repair and replace everything broken or worn.. all new bearings..seals.. motor parts..frame parts.. rebuild everything then my bikes are new.. and way better ..you learn about your bikes when you rebuild it from scratch..lots of grease..loctite torque wrench.. very important.. and tuning your bike after the build ..then you ride her and are blown away! My 2012 Ktm build took almost 2 yrs of saving and buying parts it was a$20.000 build my dream bike and holy crap it was amazing never had anything ride and deliver above and beyond my expectations as she did.. my buddies have much newer bike and brand new.. they all wanted my bike after riding it and it was the oldest.. she did have 2016 250 sx plastics change out the air box on the 2012 xc for sx box then run newer style air scoops new fender ..put on a 2017 light kit..it looked sharp.. I am an east coast rider and she was a mountain goat.. single track beast that could accelerate like a Russian mig fighter with a twist of the throttle.. you have a great eye and taste in quality parts chosen for your bikes.. and you do it right ! We would get along great ! Thank you for sharing your build I love it.. enjoy her and be so proud my friend.. oh and awesome being on the cover of DB .. congratulations!

@dirtniron 3 года назад

Matthew, thats a great feedback, thanks a lot really appreciate it! Thanks for sharing your 2012 build story, I am actually working on 2012 KTM300 right now. Would be cool to chat about your build and see some pics as well. Send me an email dirtniron7@gmail.com thanks!

@matthewkrisowaty7053 3 года назад

@@dirtniron I will send you some pics and wood love to chat about it.. so awesome!

@rapscallion3421 3 года назад

@@matthewkrisowaty7053 20,000 on a bike build and you have no videos or anything to show it off? Hmmmm what rodeo did you get all your bull s*it?

@benwood04 2 года назад

Jay Clarke is the 🐐 of applying decals and graphics. No heat gun, just pure, steady hands.

@dirtniron 2 года назад

right on!

@runerides8762 3 года назад

Sick build man, really enjoy watching the good work🔥

@dirtniron 3 года назад

Glad you enjoy it man! thanks!

@edikaspo2463 3 года назад

Brp rupiah harganya

@ohdehhan 3 года назад

Really like the look of the engine! That bronze color! Personally I would have had a bit more white in the graphics, but still an awesome build. Love these vids!

@dirtniron 3 года назад

thanks a lot Peter, appreciate it!

@pitgroove.37_66 3 года назад

I'm going to have to be completely honest here; THIS HAS TO BE THE ABSOLUTE SICKEST YZ250X I'VE EVER SEEN!!! Great job on the build

@dirtniron 3 года назад

I am going to be completely honest too: I love your comment brother! glad you like the build! 👍

@pitgroove.37_66 3 года назад

@@dirtniron 😂😂😂

@Shxdow-666 Год назад

Omg 😳 I've never seen a rebuilt bike look so amazing 👏 😍

@yoshlinmartin5620 3 года назад

Who else watched this video without having their own bike? Amazing bike man

@dirtniron 3 года назад

thanks Martin, appreciate it!

@yoshlinmartin5620 3 года назад

@@dirtniron thank you for the reply

@jamestunstall5141 3 года назад

Thats a stunning yz. Spurs me on to get my 96 restored. Great stuff 👍

@dirtniron 3 года назад

Go for it! glad you like it James!

@kyanharding3027 3 года назад

Hey man I got the same thing, they rip hell bud👍🏻

@antonpesonna5799 3 года назад

@@dirtniron ppppp00000000

@ShadyOne9 2 года назад

Spared no expense! I can appreciate that. You have great taste. Cheers

@andreasjonsson8075 2 года назад

It would be priceless too see you and the old man and Cameron Niemela together for a litle riding and garage time. Best christmas present ever 😀

@arwilmelendres1642 3 года назад

This is my first time watching RU-vid Video from start till the end. Great Job Bro! I enjoyed watching every seconds on it. 👍💪💪💪

@dirtniron 3 года назад

Thanks brother, appreciate it! Glad you like it!

@jjmckay6man1 3 года назад

Incredible job on the videography and build Rado! So nice to see it tore down and put back together on video! The bike looks very beautiful and seems to ride great also! Helping Steve do his KTM was such a long drawn out process. Sure wish it could be done in an hour like this haha! Cheers Rado and Excellent Job all around. Jeremy

@dirtniron 3 года назад

thank you Jeremy, glad you enjoyed it! thanks for acknowledging the camera and editing work too ;)

@ianmangham4570 3 года назад

Love that burnt bronze cerakote

@MrTimdtoolman1 Год назад

The bike is beautiful. I had a Suzuki RM 125 years back and it needed the mod you did to this YZ, to liven it up on the bottom end.

@Midnightpurpler34 3 года назад

the amount of detail put into this build is amazing! great stuff!! greetings from Australia

@dirtniron 3 года назад

Glad you like it! thanks mate!

@SzotJoker 3 года назад

@@dirtniron 👍👍👍💪

@regansmotorcross2414 3 года назад

I’m from Australia to mate

@pascualmartinezortega3092 3 года назад

@@SzotJoker 0 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dek3WgYPinQ.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HAj2d6Mim-E.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_B6TVNUT38I.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dek3WgYPinQ.html

@TekkyTPvP 3 года назад

that build is freakin awesome!

@dirtniron 3 года назад

thanks a lot, appreciate it!

@nojuspeciukonis2559 3 года назад

This Yamaha yz 250 looks nice

@Samprimakov 12 дней назад

Love the end product. This is an amazing skill, I would love to do this for my crf.

@gordonstimmel4590 3 года назад

Absolutely beautiful

@dirtniron 3 года назад

thanks Gordon, appreciate it!

@joshchatwin8179 3 года назад

This is like my dream bike wow just wow

@hannesilves445 2 года назад

This gave me inspiration to start learning about bikes and motors. Thanks!

@jowelMD1 2 года назад

Of all the dirt bike builds I have had the pleasure of watching in RU-vid, this, by far, is one of, if not, the best. From $1,000 to a beautiful done and well thought of machine. it's a keeper for me, if it were mine...thanks buddy. I love the vid.

@dirtniron 2 года назад

Wow, thanks! glad you enjoyed it

@lucasschulz6075 3 года назад

Sinceramente cara, ver uma moto sendo reconstruída do zero até essa perfeição é muito prazeroso, a moto ficou espetacular e muito bem preparada... Um grande e ótimo projeto, muito bom, gostei.

@sonnyscibilia4874 3 года назад

Amazing!!

@dirtniron 3 года назад

Thank you! Cheers!

@TheJackin8 3 года назад

Longest RU-vid video I've watched where I didn't skip or fast forward to the end. Good job, good video.

@dirtniron 3 года назад

Glad you liked it! thank you for watching

@rockbay79 2 года назад

This is an absolute beautiful build and bike!!!! Very, very impressed!!!

@jenslaursen1 3 года назад

What an awesome build ! really cool job. Not the parts I would have selected but I would also have gone for a motocross bike and not an enduro. But man the end result is astonishing. Great job :)

@dirtniron 3 года назад

thanks a lot Jens, glad you like it! what other parts would you use?

@jenslaursen1 3 года назад

@@dirtniron More carbon fibre ;) triple clamp. Then I would have opted for the fmf titanium blue canister exhaust. But then of course the budget also increases. And also I would have polished and milled the gearbox for less friction and durability. and the R tech restyle kit with the other gas tech. :) No hand guards. ;)

@bryanslittlegarage5724 3 года назад

Beautiful ❤️

@dirtniron 3 года назад

Thank you! 😊

@MrStatic101 2 года назад

This is absolute perfection.

@luizmilgrau7649 3 года назад

Quando a moto cai em mãos certa 😍

@isaaclombardi8649 3 года назад

they guy talking about the bike sounded like Vaun Gitten jr a bit but in a higher voice at the end of the video.

@ezraking3653 3 года назад

To anyone who sees this have a great Christmas 🎄🤙

@dirtniron 3 года назад

Merry Christmas Ezra!

@wakeuk8180 3 года назад

Finally, someone who just torque's 14mm bolts 'man tight' rather than resorting to a manual, spending 5 minutes showing us all, then getting a torque guage and only tightening to 'manuf spec' like all the other RU-vidrs. That aside, great bike, great build & content. Keep it up bud

@davidtowler8778 11 месяцев назад

I’m 50 yo & never owned my own bike . 😢 I LOVE 2 strokes ! Some how some way I’m gonna save up enough $$ to be able to afford me 1 one day , HOPEFULLY ! I thought I was gonna be able to treat myself when I celebrated 10 yrs of sobriety when it didn’t happen I said oh well I’ll do it when I celebrate 15 yrs clean & sober. That has come & gone . I’ll get one …… one day🤞🏾

@dirtniron 11 месяцев назад

get one for sure, the sooner the better ;)

@kadhleenmonsores6691 3 года назад

Meu sonho 😪💔

@yourlocalhooligan 3 года назад

What would the rough total price of a similar build like this be?

@dirtniron 3 года назад

similar to a brand new YZ250

@connarmarsh9060 3 года назад

Aka $7,500

@SotR59 Год назад

I had only planned to watch the tear down and skip to the end product since I've never seen a modern bike tore down to bare bones but I became engrossed in the entire process and couldn't look away. Great video. I did a bare frame restoration of my 1973 Suzuki TM 125 when I was 15 by myself except the bottom end was fine, only did the top end and didn't have to replace every bearing and seal throughout like this one. Though I have not had much to do with motorcycles since the early 80's other than watching races, it's not like I was unaware of technological advances but seeing this gives me perspective on why modern bikes cost so much, inflation notwithstanding. If I was 15 now and trying to rebuild something like this......I wouldn't LOL.

@dirtniron Год назад

Thanks for watching 👍

@antonyblount5529 Год назад

Wow man what a gorgeous bike

@fortnitemobilevidvid9643 3 года назад

An amazing job but he should have straighter the Radiator fins

@Tank10953 2 года назад

Das ist keine Kunst... Nach wie vor baut Yamaha die yz 250. Also alles neu bestellen was man braucht austauschen und los geht es... Lächerlich... Wo ist die Kunst?

@Tank10953 2 года назад

Amazing ist da garnichts

@joshkauai 3 года назад

So how much did the build cost? Trying to figure out what i'm in for for my build.

@MotionJosh 3 года назад

it’s was 9,560 total cost

@joshkauai 3 года назад

@@MotionJosh 👀

@dirtniron 3 года назад

you can do decent build for 3-4k, this one was more than that.. similar to a brand new YZ250

@sebastianmoreno1568 3 года назад

Watched the build from start to finish. Amazing final product. Great build!

@dirtniron 3 года назад

thanks Sebastian, glad you like it! glad you watched it all, bit long video I know.. I didnt want to leave anything out ;)

@182mcg1 Год назад

Absolutely amazing job

@rickytann1501 3 года назад

Nice bike. Just about as nice as a 2019 ktm300xcw. When you coming out to Florida to ride?

@dirtniron 3 года назад

glad you like it, One day I want to ride in all cool US places!

@dirtsharktv8960 3 года назад

$1000 imagine having to paying $5000 in Australia

@dirtniron 3 года назад

it was a good deal

@dirtsharktv8960 3 года назад

@@dirtniron yeah were paying insane amounts over here its crazy

@phoenixkotsapa2099 2 года назад

@@dirtsharktv8960 new zealand 😧

@arunvs6240 2 года назад

Wow ❤️ what a stable machine. Real art 🔥🔥

@rickskrabl3137 2 года назад

A thing of beauty congrats!!!

@ianloughney9570 3 года назад

I feel like a plastic skid plate is a lot like a mesh condom.

@ericmacnichol3791 3 года назад

That's not a plastic skid plate. 😂😂😊

@ianloughney9570 3 года назад

@@ericmacnichol3791 Well its certainly not metal, unless your man there is the hulk given how easily he's bending it.

@ianloughney9570 3 года назад

@@cannabiscraftsman1278 Since it seems like more than one person wants to act a complete fool in the replies, heres the link to the plate he used. **From the manufacturer "Made of 8mm HDPE plastic" ** www.axp-racing.com/en/product/yamaha-yz250-yz250x-wr250-xtrem-skid-plate-black-ax1440

@DerangedOffRoad 3 года назад

Superior to metal because it slides over the rocks where a metal one just grinds. They are incredibly strong and don't deform when taking a big hit.

@ianloughney9570 3 года назад

@@DerangedOffRoad Bro, the guy in the video bent it with his hand. If you're trying to say this guy can generate more force with his one hand than a dirtbike hitting a rock at full steam, just piss off lol.

@purplesweater1134 3 года назад

personally i love the look of it but i think the gas tank kinda ruins the look of it

@dirtniron 3 года назад

thanks for the feedback

@manusallent2035 3 года назад

Its like an oldschool dirtbike

@manusallent2035 3 года назад

The tank

@Yhyhyhyh276 Год назад

This bike looked really clean from the get go

@zqwas6306 3 года назад

What a great build I’m doing the same and I think I’ll keep doing it for like ever

@dirtniron 3 года назад

glad you like it!

@micahcorrigan1121 3 года назад

That bike turned out sexy as hell !! 52 minutes well spent. Looking forward to more builds !! Thanks dirt and iron !!

@dirtniron 3 года назад

thanks Micah, glad you like it! working on ktm 300 next

@deanoloughlin6129 Год назад

That's absolutely beautiful. I loved the music too. I would have only done 1 thing different, I would have sprayed the petrol tank black. Big love from the UK 🇬🇧

@dirtniron Год назад

thanks, glad you like it!

@nigelw598 3 года назад

Great build Dirt n Iron! Nice mix of parts. I really like the colour combo and D and I graphics. The only thing that made my ocd kick in was not straightening out the fins in the radiators. Top effort mate and I hope you get many miles of enjoyment out of that weapon, Cheers 🍻👍👍

@oedizainoeddin3215 2 года назад

Nice rebuilt....owesome I love it to watch. Say hellow from Bali Indonesia...Oedi.

@MsAndreaskastrup 3 года назад

So great! Really love following along this and you can really well see how it's done, love it!

@dirtniron 3 года назад

Thank you Andreas! glad you like it!

@boonsfrc 3 года назад

Man I wish I had a garage to work in , I live your videos I learn something from everyone of your videos I wanna buy me a bike like that and rebuild I don't know all the things one needs to know to do full job but I WILL learn 😅

@jakecareless3096 2 года назад

amazing build and great video thanks for sharing!!

@joshchatwin8569 Год назад

Has to be the best looking one on RU-vid

@dirtniron Год назад

thanks a lot Josh, appreciate it!

@TheHyTek 2 года назад

GORGEOUS, I am truly mesmerized.

@dirtniron 2 года назад

thanks, glad you like it!

@CRAZYnayte2121 3 года назад

Very satisfying to watch

@dirtniron 3 года назад

Glad you think so! thanks

@JoseDiaz-dm8kb 3 года назад

Love the way it sounds in the technical part you're riding, great job. Keep it up.

@dirtniron 3 года назад

Glad you enjoy it! thanks Jose!

@davem145mxr 2 года назад

My all time favorite bike

@jakemurphy192 3 года назад

This is my dream bike 😍real nice bike cleanest bike I’ve seen

@ghostrider1244 3 года назад

I’m a Honda guy, but this it the best yamaha yz builds ever!!

@dirtniron 3 года назад

Thanks man 😉

@michaelhanratty8163 2 года назад

I think it’s awesome I watched the whole video and what you did to the bike is absolutely fantastic 👍😎🏴󠁧󠁢󠁳󠁣󠁴󠁿

@dirtniron 2 года назад

Awesome, thank you!

@BruskiMcBuddyShow 3 года назад

Outstanding build video. I thoroughly enjoyed watching this!

@dirtniron 3 года назад

Glad you enjoyed it! Thanks!

@derekwhite9665 3 года назад

Great build bike looks great sounds like it performs even better can’t wait till I get my YZ 250 up rebuilding motor now

@dirtniron 3 года назад

yz250 is a great platform!

@nickvinci6191 2 года назад

Am I the only one amazed at how effortlessly he put the graphics on?

@B.C.EpicExplorer 3 года назад

super nice build watched it all would love that bike

@dirtniron 3 года назад

Thanks man, appreciate it!

@yvonnerodgers1676 3 месяца назад

Deffo looks the part well done

@EDE20052 3 года назад

I hope that i would have Time to project My bike like this. I live how this bike looks. Great job

@dirtniron 3 года назад

Go for it!

@littlebeam1621 День назад

Fantastic rebuild, great work guys

@aartliefers9114 2 года назад

Arend Liefers Nice job really like the color of the motor love to see how you do it. 👍

@carlbezuidenhoudt3122 3 года назад

a truly beautiful bike.

@dirtniron 3 года назад

thanks Carl!

@thebuckey6684 2 года назад

Could watch all day....

@sewkingwet 2 года назад

killer bike, so want one! nice job

@alikiani436 2 года назад

It's so nice,I love it .

@TheDiViSion007 2 года назад

Love the build amazing I want to do that one day after the Army.

@dirtniron 2 года назад

go for it man!

@jonelsalas2428 2 года назад

I like this bike so much sir...

@jorgeam6799 3 года назад

The rebuided engine looks cool.. dream for my '92 YZ125 🤩

@dirtniron 3 года назад

thanks, glad you like it

@jorgeam6799 3 года назад

@@dirtniron how not? Looks better than original ✌ If you find '92 YZ125 to rebuild can be very cool. I would like to do like you but i live in Thailand and i have not your skills... 😁👍

@jorgeam6799 3 года назад

@@dirtniron anyway i got ideas watching your videos, ill order the large fuel tank 32,6 g. to your suplier

@TimberTrainer 3 года назад

Cool build! It would be nice to have a stator upgrade and some LED lights. The engine upgrades for more bottom end and transmission updates are great!

@dirtniron 3 года назад

That would be cool! thanks for the feedback!

@Ultra54able 3 года назад

That was terrific..thanks for taking the time. I liked the music at 38:00 best.

@dirtniron 3 года назад

thanks Jack, appreciate it!

@acko8016 3 года назад

Just got a ktm 125 2006 love this build

@dirtniron 3 года назад

congrats man!

@NeilDekock-ww6gc Год назад

Well done looks amazing 🤩

@5635randy 3 года назад

Really like the build you made the side stickers look easy they never are. That is a bike I would want I currently ride race yz250f but see a lot of the 250 2 strokes these days

@dirtniron 3 года назад

thanks Randy, glad you like it!