2 Ways To Do Floating Shelves - Which Is Stronger?

Подписаться 231 тыс.

Просмотров 2,9 млн

50% 1

I made two different kinds of floating shelves using different methods, and tested both of them by jumping on them. The results might surprise you. One is easy one is more complected.
IMPORTANT: if you’re thinking about attempting the second method, please watch my follow up video • My Video Was Wrong? (2...
A huge thank you to Anker:
Get yourself one of these amazing chargers:
Anker 521 Charger (Nano Pro): ankerfast.club/3NIVhje
Anker 511 Charger (Nano Pro): ankerfast.club/3uR0Vr5
#AnkerNanoPro
Follow me on Instagram:
/ a.mere.creator
Support this channel on Patreon
/ amircreator
Detailed video on wood finishing: • Stain & Finish Wood Li...
Inspiration for threaded rod shelf goes to Rusty Dobbs : • Strong Floating Shelve...
Tools and products in this video (affiliate):
Shelf Brackets: amzn.to/3EhVTba
Doweling Jig: amzn.to/2CUcvuf
Magnets: amzn.to/3yASlAc
Threaded Rod: amzn.to/3jCRwOA
Drill and driver: amzn.to/2VfxyNr
Drill bits: amzn.to/2SvXy6F
Circular saw: amzn.to/39RkwLf
Circular Saw Blade: amzn.to/3HnhShm
Dark Walnut wood stain: amzn.to/35p8mIU
Varathane Water Based Polyurethane Satin Wood Finish: amzn.to/3eDVtiL
Random orbit sander: amzn.to/3fhd1Rt
90 Degree Corner Clamp: amzn.to/3tm1Uy0
Orange Dead Blow Hammer: amzn.to/3lLXTh6
Digital Angle Gauge Magnetic: amzn.to/2M8rty9
Compact Router: amzn.to/3eDmnpT
Chamfer Router Bit: amzn.to/3cvEKON
Boiled Linseed Oil: amzn.to/3AZG2ws
Angle Grinder: amzn.to/3hbqU3V
Production
Main Camera: amzn.to/3aujLtW
Lens 1: amzn.to/3rhnjX2
Lens 2: amzn.to/3rcJ8qT
Backup Camera and lens: amzn.to/2RF5V24
Tripod Ball Head: amzn.to/3xOgS0U
00:00 Intro
00:10 DIY shelf prep
01:21 Quest to find the illusive stud
1:46 DIY shelf hanging
2:18 Anker 521 Charger (Nano Pro)
3:28 Pro shelf wall prep
5:01 Pro shelf wood prep
5:43 Strength test
Disclaimer: Some of these links lead to products and tools used in the video. If you click, or buy something there, I get a small commission, but it doesn't change the price for you. If you would like to support me, have a look.
DIY vs pro, floating shelf also floating shelf DIY with floating shelf brackets, how to use floating shelf hardware, installing floating shelf ideas installation, this is a hidden compartment floating shelf build with lighting led lights gun decoration. How to make strong floating shelf, had to use a stud finder and brackets to find the stud with magnets. These floating shelves are also known as floating shelving, or even floating shelves without drilling, these floating shelves design to be easy to reproduce. And this also includes floating shelves decor ideas which could be used for floating TV shelves or floating TV wall. how to make floating shelves like DIY creators. This also includes how to find a stud finder without a stud finder. how to make DIY floating wall shelves.
2 Ways To Build A Floating Shelf + Strength Test - DIY VS Pro
2 Ways To Build A Floating Shelf - Which Is Stronger?
2 Ways To Do Floating Shelves - Step By Step
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results.

Хобби

Опубликовано:

11 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 536

@A.Mere.Creator Год назад

Tools and products in this video (affiliate): Shelf Brackets: amzn.to/3EhVTba Doweling Jig: amzn.to/2CUcvuf Magnets: amzn.to/3yASlAc Compact Router: amzn.to/3eDmnpT Chamfer Router Bit: amzn.to/3cvEKON Threaded Rod: amzn.to/3jCRwOA Drill and driver: amzn.to/2VfxyNr Drill bits: amzn.to/2SvXy6F Circular saw: amzn.to/39RkwLf Circular Saw Blade: amzn.to/3HnhShm Dark Walnut wood stain: amzn.to/35p8mIU Varathane Water Based Polyurethane Satin Wood Finish: amzn.to/3eDVtiL Random orbit sander: amzn.to/3fhd1Rt 90 Degree Corner Clamp: amzn.to/3tm1Uy0 Orange Dead Blow Hammer: amzn.to/3lLXTh6 Digital Angle Gauge Magnetic: amzn.to/2M8rty9 Boiled Linseed Oil: amzn.to/3AZG2ws Angle Grinder: amzn.to/3hbqU3V IMPORTANT: if you’re thinking about attempting the second method, please watch my follow up video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Wyx2V68fFHs.html

@Jordansupreme 10 месяцев назад

Ok cool, but where’d you get them boots?

@alanasplund6656 Год назад

I liked the part where you threw away the stud finder so you could use the far superior method of hammering a nail into the drywall sixteen times to find the edge of the stud.

@jakerazmataz852 Год назад

Work smarter not....never mind.

@nightstringers Год назад

Alan Asplund you are loved that is awesome lol lol

@4TheMotorist Год назад

@@jakerazmataz852 🤣

@jtoker9758 Год назад

It would have been nice to see if the stud finder actually works on the wall. Never used one or will buy one, so don't know.

@Marinesniprx Год назад

@@jtoker9758 yes they work well and that one in particular throws up a red arrow exactly on the stud.

@Sidecutter 2 года назад

Hey so...problem it seems like you didn't consider. Those threaded rods are going WAY deep into the stud. More than enough to have you drilling into pipes or wiring that is run through the stud center. This can only be used in walls where you know 100% that there is nothing going through the studs in that location.

@gideonvanloggerenberg4831 2 года назад

Damn right.

@barryallen5507 2 года назад

Personally, if I wanted a high load bearing floating wall shelf, I would just cut the drywall, double the studs, and use a torsion based steel T bracket for the shelf.

@00gyb00gy 2 года назад

@@barryallen5507 I was going to comment the same thing. Cutting drywall would have been easier, and safer. And if it needs to hold more of a load, put more load bearing support... Smh

@CheckeredDeath89 2 года назад

its not very difficult to know if there is or not. Is why it says Pro version :D

@jamIam6548 2 года назад

Stud guards?

@DavidKasan 2 года назад

You teach us about a new great charging option, two different ways to locate studs, two different styles of floating shelves, two different finish options, and test both styles with results and review and do it ALL in only 6 1/2 minutes! Great video! So many other channels could / should learn from you.

@JyotbirSingh 2 года назад

2 ways to drill at 90 degrees straight

@moreseun 2 года назад

Bro 💥👊🏾

@liquidshade 2 года назад

Holy crap I just discovered your channel and I LOVE how you're videos are straight to the point and I don't have to watch them on 2x speed just to get the information more quickly. Plus you link to everything you use!!! Liked, Comments and Subbed! 👏👏

@ZetaReticulian 2 года назад

If you can find a stud in your wall by looking for “dimples” using your cellphones flashlight…… you got a second rate drywall guy.

@Bevity 3 месяца назад

He probably put up the wall himself.

@raterus 10 дней назад

Even with top drywall finishing, give it enough time and kids bouncing off the walls, you'll dimple it up.

@RobertDPenn Год назад

Thank you! Thank you so much for testing them to the breaking point. I really appreciate it. That is what I want to see. I want to see when they break

@satxbrad Год назад

Thanks! I had built floating shelves while putting up a wall in the first place. With your techniques I can do it the other walls in the room

@ExiledStardust Год назад

Man, you get in there, make your points, and don't waste time! So many videos have lengthy preambles or bog down in the middle or take forever to explain something. Bravo, dude.

@pitviper7924 Год назад

When drilling more than 1-1/2" into a stud, be careful, there might be wiring or plumbing going through the center of the stud. If the house was built correctly and inspected before the drywall went up, there should be metal plates covering all wiring or plumbing going through the studs. Unfortunately a lot of DIYers do some crazy stuff and skip the required steps to be up to code.

@j_dane9519 11 месяцев назад

In my jurisdiction you only need protective plates if the wire or pipe is less than 1 inch from the edge of the stud. Drill deeper than that and there's never any protection.

@SpectrumOfChange 10 месяцев назад

Be careful how, drill 1.5 inches in, then shine a light and if something shines back - go somewhere else?

@jeffreyvanzeijst7932 7 месяцев назад

Isn't that the whole reason for using the studfinder..since some of them are actually also powercord and copper pipe detectors?

@uhmmchicken 5 месяцев назад

I did not know there were stud finders capable of detecting live wire and pipes, that's super useful. I had some really old stud finders as a kid and have always used the knocking technique instead because they were finicky and annoying to use. You can clearly feel/hear the stud behind the drywall with a light tap from your knuckles.@@jeffreyvanzeijst7932

@Chris____. 5 месяцев назад

@@SpectrumOfChange Look at the schematic of the house, you can see all the spots with cables or plumbing, dont be dumb and drill into wires & death, be smart and just look at the piece of paper (or ask the landlord if you dont have it, idk)

@Ninja_Drummer Год назад

Nice ideas for the shelves. One tip I have learned when staining the end grain of timber. Spend a bit of time sanding it super fine down to 400+ grit with random orbital sander. It stops it soaking up too much extra stain and looking darker than the rest of the side grain timber.

@ScottYuJan 2 года назад

the magnet technique for finding studs is so clever 😐

@refleximus6071 2 года назад

For sure, I agree those yellow stud finders are GARBAAAGGEEEE. I see them and I don't even bother grabbing them to find a stud. I do however like the franklin pro sensors they do okay at finding studs. Often for sale at costco. usually found at other big box stores. Magnet method works great in most cases.

@kwcnasa 2 года назад

Great demo on showing how strong the sold wood and the shelf brackets amd Rod can be.

@scpk2246 8 месяцев назад

Architecture IS AMAZING!!! I'M IN LOVE WITH IT! kudos to the video!

@JustinShaedo 2 месяца назад

This is one of the best edited and presented videos in the diy/woodworker sphere. Respect on a great job here!

@newbieuserguy6899 Год назад

Great info at a fast pace. No silliness or fluff.

@VishalPatelUK 2 года назад

New to your channel. I was enjoying how your videos are so concise and without any waffle, but then joke about the stud finder did make me chuckle. Look forward to seeing more content, great video so far.

@ramm2601 2 года назад

Love the testing side of things. You should try a coat of white stain then the walnut stain. It will make a white oak typa color which will look sick.

@lancetaylor9015 2 года назад

Is there an example of this in another video? I'd like to see what you're talking about-- sounds awesome.

@Cash4Fruit Год назад

I think what you’re describing is the very trendy Restoration Hardware a type of wood I’m looking for I wish to see in real life example though!

@Tang526 Год назад

I need a image reference

@ThisTall 2 года назад

I love this method. I use maple 1” dowel to do this all the time. A trick I use to place it on the stud is to just cut the drywall out in a small area within the shelfs footprint.

@DanD-vu7tb 19 дней назад

The stud finder joke was great especially when he threw it out 🤣

@sasharose2963 3 месяца назад

Wow. Super in depth and well executed. Very impressed. I watch so many diys. This really impressed me.

@lohphat Год назад

If the construction crew knew their craft, there would be no dimples over the stud fasteners, the mudding and sanding should have eliminated the dimples.

@MikkoRantalainen Год назад

I totally agree. And if the drywalls are pro grade, they will have mud all over the wall because that's the only sure way to have no seams of any kind visible through the paint. The wall will have visible imperfections only if it's not sanded after mudding.

@cugsy Год назад

100% agree... This part of the video is so wrong... The way he finds stud center by nailing through the wall over and over...*facepalm* Just use a stud finder and that way you'll know if there's nearby electrical wires too. Oh and you won't have to nail 700 holes in your wall.

@kyleriesland7863 Год назад

@@cugsy lmao you must not work with carpenters. For one, the nails he put on the wall are placed so that when yhe shelf goes in, you'll never see it. For 2, ever cabinet guy I know uses that same technique. Pull down some of your cabinets and I'm sure you'll find quite a few holes my friend

@cugsy Год назад

@@kyleriesland7863 you're right I don't, I just fix all their botched and rushed work lol

@kyleriesland7863 Год назад

@@cugsy I doubt that lol these guys hang perfect kitchens with 15 or so cabinets in 3 hours. Plumb, level, flush stiles, and crown all installed. Hbu? Botched work lmao what a joke

@djames8014 2 года назад

Man this is real good stuph. I just discovered your channel and just by watching this first video, I hereby declare that it is de best DIY/craft channel I’ve ever come by. Everything about it: content, production, quirks, style. I especially appreciate the quick and “natural” way to find studs. Thank you, sir!

@frostbite7959 2 года назад

I will be putting these shelves in my house here very shortly thanks for a great video

@douglee650 2 года назад

DIYers, when drilling into walls watch out for wires and pipes, water and gas. Know where your shutoffs for everything are. Usually good construction will put metal plates so you can’t drill through. And there’s convention where they are embedded halfway in the stud so the depth is known. But research this and DIY safely

@Imbatmn57 2 года назад

I don't think I'll put holes in my walls, I don't trust that there's a metal plate in between the drywall and the wires

@ModMINI 2 года назад

This is a very important precaution as the time and cost to repair could be very high. The good news is you have maybe 2 or 3 things going through a stud on average at various heights, usually close to floor or ceiling or the height of a wall switch, so you'll probably be lucky and find nothing in the way. But still check!

@OnlyBlix Год назад

@@Imbatmn57 The wires should be following code, which means they're going through the center of the stud and give 1 3/8 inches on both sides of the wood. This is done so drywall screws (1 1/4 in.) can safely go into the studs since drywall is 1/2 in. thick + the 1 3/8 in given by the stud. So use the appropriate length screws when going into studs and you should be fine. Pipes on the other hand, you can indeed hit if you mistake one for a stud.

@christopherjones7191 Год назад

@@OnlyBlix never assume the guy before you knew what they were doing.

@samleonyne Год назад

First RU-vidr I came across who didn't say "Like the video / Subscribe to the channel" crap in the end of the video! That's Mere Creative I must say 💯

@joeny1980 Год назад

Cutting on the insulation board is very smart. Good tip

13 дней назад

I love the little model to show how the interior of an (American!) wall looks like. They look very different from all the parts of the world I lived in. We usually use brick or reinforced concrete.

@YuiHisaishi 7 месяцев назад

Omg, the way you found those studs was genius! Thanks for the new method! =D

@FatGooseArts 2 года назад

Them some snazzy looking stronk shelves! Well done dude

@totsmini3105 6 месяцев назад

This Video is Brilliant!! - for a begginer or novice DIY enthusiast! - I will now use your techniques!! - Thanks greatly!!

@mariak8480 Год назад

Horses for dummies, great book. I always have a copy at hand on my shelf too

@phlogistanjones2722 2 года назад

Very well explained and demonstrated. LESS THAN SEVEN MINUTES!

@DragonclawMakerStudio Год назад

Good stuff. Thanks for the video. Love the ending. Working on my Stormtrooper Star Wars themed bar shelves."Thanks for watching bye."

@epeiusgarage 2 года назад

I like how you showed the strength. Thanks

@jasonbogdovitz7357 Год назад

The re-purposed Sriracha bottle is a nice touch, very professional

@aam77 2 года назад

Very nice video. That "Thanks for watching bye" at the end as if his parents caught him doing something he wasn't supposd to :p

@user-ur1qe6in3d 8 месяцев назад

excellent detail to instructions

@kingalphadogg 2 года назад

Cool vid bro, great work! Entertaining and useful! 😁🙌🏾👍🏾

@kc7136 8 месяцев назад

Good stuff! thanks for sharing

@Alexey_ru 2 года назад

Anker are the best cables I have ever seen. it's sad, but in recent years they cost like original apples, but they are much better in quality and do not peel off and do not get dirty. Good job dude! Best regards from Russia!

@jackiesawtell3749 2 года назад

Love you video you make everything so easy all detailed thank you 👍

@monophthalmus3254 Год назад

Nice, straight to the point. Thank you.

@Sokail87 2 года назад

Hahahahaha I was totally caught off guard by the hastiness in the very end! Great video, and nice, very doable beginner's project. :)

@testimonium6596 Год назад

Very good work, man ! Keep it up !

@gideonkroll5573 Год назад

I really liked this! I’ve seen a lot of videos on doing floating shelves and I appreciate your forward straight to the point! Rebar might be cheaper and maybe stronger. From what I’ve seen. Thanks for the video!

@davidalcott5097 Год назад

Best, simplest idea yet!

@nalaniboseovski5398 Год назад

nice and concise explanations - thank youuuu

@m444ss Год назад

just the video I needed to watch. thanks!

@Jon-xt2ul 8 месяцев назад

Cool video bro, thanks for sharing

@MikkoRantalainen Год назад

1:30 The use of magnet instead of stud finder is pretty clever indeed! In addition to finding the studs, you also find the locations of the screws which is important because you don't want to attach anything too close to existing screw.

@ThatGuyMata Год назад

its clever if whoever taped the wall is awful at their job. you could also just use a studfinder instead of using a fridge magnet and a nail. This is a pretty classic "work hard not smart" example

@MikkoRantalainen Год назад

@@ThatGuyMata Studfinders rarely have accuracy in millimeters. A magnet can locate screwheads much more accurately and the nail can find the edge of the stud with submillimeter accuracy. That said, drilling holes with diameter close to 50% of the stud may still be a bad idea for structural integrity of the stud.

@ThatGuyMata Год назад

@@MikkoRantalainen my studfinder has millimeter accuracy and while a pin magnet might be more accurate, this is quite literally just going to great lengths to over complicate something. Coming from someone marketing themselves as a "pro", I couldn't find you a single working carpenter right now that would use a magnet and a nail to find studs and trust me I know a shit load of carpenters

@MikkoRantalainen Год назад

@@ThatGuyMata Sounds like I have to get a much better studfinder. Which studfinder do you use if you find that it has millimeter accuracy?

@ThatGuyMata Год назад

@@MikkoRantalainen my Bosch finder has 0.0625/1.5mm accuracy. I'm sure there are plenty of others in that range

@thedronemediacomvancouver4976 Год назад

Anker products rock! Great price and high quality...nice work !

@user-em6ie2be7x Год назад

Thanks for doing a DIY & Professional Version...Nice Cat BTW. 🐈

@pedrodea.m.g8767 Год назад

Thank you. Hoping for more tutorials!

@kunjpatel2355 2 года назад

Always love your vids...❤ keep it up

@A.Mere.Creator 2 года назад

Thank you :)

@carlogle6207 2 месяца назад

Love that level!

@SteveCircuits 2 года назад

I appreciate that you show your oopsies in your videos. None of this "perfect the first time" BS. :)

@LincolnHawk-bk5yr 8 месяцев назад

I love that flashlight/phone trick.

@hallucinati 2 года назад

Dude i love the closeout. Thanksforwatchingbye.

@JuanHernandez-pe4wq Год назад

Great job on this video. Bravo!

@TortureBot 2 месяца назад

I use a stud finder from time to time but I have used your methods for finding studs for years. Very accurate, and to be honest, if you get just the right sunlight in a room or use a flashlight at night, you can find all of the studs easily just by looking for screws. I know people will claim that excellent drywallers will not make mistakes that will make this obvious, but I guess I have never seen excellent drywallers. If you use a small powerful magnet with a thin piece of cloth to keep you from making marks on your walls, you can also find the nail or screw heads very easily.

@haydenhack 7 месяцев назад

Dude , that phone/magnet trick is genius

@danielhayn7756 Год назад

Pretty cool, thanx for sharing!

@sunkissed4261 9 месяцев назад

Beautiful work!

@whomadethatsaltysoup Год назад

Great tutorial! I've already built a couple of shelves using the threaded rod method, and they are plenty strong. I found that the hole in the shelf works best if it is a little bit tight; it can easily be threaded in using a cordless drill. The only issue, as many others will have noted, is the depth of the wall. I fitted my shelves in a brick property with sengke skin 4.5 inch brick and plaster, coming to around 6 inches in total. Just saying, you don't want to bust through to the folks next door, or go crazy dancing on a 3 inch rod.

@alfredjealouse7040 2 года назад

love the Siracha bottle for the linseed oil.

@alexadelaide Год назад

DIY tips, relaxed geek ads, cats, my man has hit the YT creator trifecta

@diegogomez1837 2 года назад

Yes, I like. Very fun video. Good job 👍

@d9_1056 8 месяцев назад

Awesome video man

@donniecatalano 6 месяцев назад

The "thanksforwatchingbye" At the end made me laugh 🤣 anyway, you inspired me to mount a PRO shelf in my bathroom... cheers!

@jwbnscacpt 2 месяца назад

Excellent! Thank you

@noxirs7059 2 года назад

Wonderful and awesome advice

@mr.deswal6903 Год назад

Well done

@jimmyjamm7560 Год назад

Dude..great vid bro

@iph2 10 месяцев назад

The power of actual drilling into studs instead of drywall anchors

@feffe4036 Год назад

Great vid. Got me all hyped to build a shelf. Alltho i wont but ill save the vid.

@93R50N Год назад

Simple yet awesome. Thanks. You just cot yourself another sub. Keep it up.

@rock962000 2 года назад

The second option is so nice

@silviachavarria8942 2 года назад

Beautiful and very modern looking shelves! Never disappoint, excellent video, keep up the amazing job! Love the framed print btw ;)

@rob-toolsandtech2521 2 года назад

Great video! I like these ideas.

@sherryg3098 9 месяцев назад

Thank you!

@jupiternorthe1535 Год назад

I like the one with the bracket showing. It’s pretty.

@ArturoMendezC 2 года назад

sin duda la repisa de varilla es de mis favoritas son muy fuertes saludos

@kmcrafting4837 Год назад

Allthread is fairly soft steel, give SS threaded or even better smooth SS 1/2" rod. Spring steel too. Thanks for the demonstration!

@rimom05 10 месяцев назад

Oh my gosh, thank you so much for saying "regardless" instead of "irregardless" (🤢🤮) You have now become one of my favorite RU-vidrs 🤪

@nightstringers Год назад

I like the alien face on the wood 0:53

@7evolance Год назад

I agree with you, anker product is quality.

@gaspererjavec7108 2 года назад

You could use a higher tensile strength steel rod to get even better results, or even rebar. Awesome vid by the way.

@OnlyBlix Год назад

Fuck it. Just build a house around the shelf with rebar inside reinforced concrete.

@birdolla4441 Год назад

I have used rebar, both into wood studs but also masonry. I then use a quality anchoring epoxy. Never had a problem

@renswbbrs Год назад

i love your sriracha bottle!

@shanicethornton3049 Год назад

Ohh I love the first one

@boblee3322 2 года назад

I just started laughing when you started jumping haha. great video and test.

@unionse7en 2 года назад

beam strength is defined by the cross sectional area (area moment of inertia), so the round rods are "vertically thicker" than the flat brackets. (the reason for the shape of an I beam). Study hollow beams and cantilevers to solid ones, for those interested

@onetwothree4148 2 года назад

Also determined by the material. All-thread has very little shear strength and the threads are for metal not wood. His results would have been different if he used the same diameter lag bolts or thicker brackets.

@odonnelldenise 8 месяцев назад

Thanks-for-watching-bye! SUBSCRIBED!

@JG-fg1ye 2 года назад

Excellent video

@mOddEdLiKeHeLL 2 года назад

Both these methods will definitely hold my Desktop PC on a wall

@googlesbitch 2 года назад

Bending the threaded rods shouldn't be the concern, it's splitting the studs inside the walls when driving a long metal rod and stomping on them.

@devinmahoney3777 2 года назад

Why shouldn’t the results of the test be the results of the test?!? He tested it and the rods bent. The studs did not split…

@googlesbitch 2 года назад

@@devinmahoney3777 This video sends a message for others to try it and I am just leaving a caveat for others to be aware of the consequences of doing such a thing. Repairing a broken stud is far more expensive and risky, especially if a load bearing wall damaged, causing possible structure to shift.

@SLICEDfinds 2 года назад

That's the same though I had when I saw him using a 3/8 bit on a 1-1/2" stud.

@googlesbitch 2 года назад

@@SLICEDfinds Even worst, he used a 1/2" bit and that means 1/3 of the wood has been removed and wood is weakest when cut against the grain.

@markoshun 2 года назад

Great video, good method. Bonus tips and still short and to the point. From a carpenter’s perspective. 1- Jumping is applying a force of several times his weight. No shelf is designed for that. Solution, don’t jump on it (except for a RU-vid demo). 2- Walls are already full of split studs just from the quality of wood we use for framing 3- Studs are already full of larger than 1/2” holes for wiring and plumbing.

@plasmathunderdx Год назад

Anker cables last so long its amazing

@kevinm8865 Год назад

Very nice. Thank you.

@steveo5174 2 года назад

Great video! Easy to understand, short and to the point!

@inspiringbuilds 2 года назад

Nice build and strength test. Lol I didn’t think of doing a strength test with the few floating shelf DIY’s I created on here. The magnet trick works great for finding studs. 👍🏼