2001 JEEP CHEROKEE XJ TIMING CHAIN REPLACEMENT - WRECKED J the RESURRECTED XJ

Подписаться 32 тыс.

Просмотров 37 тыс.

50% 1

Hey Guys! I'm Back with the long-overdue Wrecked J timing chain video! Hope this video can answer some of your 4.0 timing chain questions! Feel free to use the links to all the products in the description.
#Jeep #Cherokee #Waterpump #timingchain
2001 Jeep 4.0 timing chain part number is 53020444
www.ebay.com/i...
Felpro timing chain gasket kit - amzn.to/38XO2UC
Ares Fan Clutch Tool - amzn.to/3kPryIq
Puller Tool Kit - amzn.to/37m5h1x
Felpro universal 4.0 water pump gasket - amzn.to/3g8lFUl
Jeep XJ OEM style water pump - amzn.to/3IQetZ9
Mopar Genuine Water Pump Heater Return Tube 53007978 - amzn.to/3IO7AYo
Dorman 56398 Engine Water Pump Inlet Tube - amzn.to/3IOf0uE
** DOORMAN INLET TUBE IS LESS EXPENSIVE, HOWEVER, THEY MAY BE DEFECTIVE!!! **
Brake Clean - amzn.to/32ESfKe
Microfiber cloths - amzn.to/3o9xzS9
Permatex High Temp Gasket Maker - amzn.to/34d1otY
XJ 195 Thermostat - amzn.to/3G9Okmt
Dorman 902-306 Thermostat Housing - amzn.to/3r5gE53
Engine Coolant Temperature Temp Sensor - amzn.to/3o7cho2
Daniel 2.20 Blessed be the name of God forever and ever for All wisdom and power are His.
Hey, what’s up, guys? I hope you enjoyed another project. Please remember that this video product is meant for entertainment purposes only and intended for people of driving age, and that is not “made for kids”. Also Please Keep in mind I am not a professional and I have no professional training so don’t try this at home. If you decide to modify or fix your own vehicle please keep it legal, roadworthy, and most importantly SAFE. Thanks for watching and I’ll see you on the next project! ✌

Опубликовано:

20 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@austinaubinoe 3 месяца назад

FYI anyone doing this job. -Do not snug cover bolts down until you seat the harmonic balancer past the seal. This centers the seal on the harmonic balancer and will increase the life of the seal. You will need to pull it back off to tighten two of the small bolts on the driver side of the engine. -Recommend changing the balancer if yours is 20 years old. -RTV is only necessary where the paper gasket meets the oil pan gasket, copper spray a gasket on the paper works great, and not as messy. Not that RTV doesn't work as well. -Really not recommended to put a new chain on old sprockets, the teeth wear significantly. I have never heard of the chain being the cause of a 4.0L failure, but it is good practice just to change it when the timing cover is off. Note, that front crank seal is very difficult to remove with the cover in place. You will probably end up causing additional damage and removing the cover anyways.

@fleetofwjs1893 2 года назад

At Dan's house, the kids don't sing "the foot bone's connected to the leg bone, the leg bone's connected to the....", they sing the XJ version instead. Altogether now, "The thermostat led me to the water pump, the water pump led me to the timing chain, the timing chain led me to the crankshaft, the..." 🥳🥳🥳

@ProjectDanH 2 года назад

🤣🤣🤣🤣 yes! You nailed it bro! Hope ya got those parts ok 😁

@fleetofwjs1893 2 года назад

Yes, I got them. Your box was bigger, but I think mine weighed more. HEAVY... LOL

@MattBrownbill 2 года назад

Great explanation, as usual. In the past, I have put the pulley back on, with the cover still loose, to make sure the seal is even, round the crank, then tightened down the cover bolts. Not sure if it is necessary though!

@ProjectDanH 2 года назад

That's pretty cool. Thinking outside the box on that one!

@michaelauskings1352 2 года назад

I was going to comment the same thing. The FSM calls out the use of a "timing case cover alignment and seal installation tool" to center the crank in the seal. I've heard of the same suggestion to install the new balancer before torqing to ensure correct alignment.

@dad3562 2 года назад

Nice okay cool, it’s good to read this because that was going to be my plan was well.

@hunclex7495 Год назад

That is the the correct way. Doing that centers the seal and make it last longer.

@Homeinmygardenwithmydog Год назад

Just checked out your channel and your Instagram. Figured you for a fellow Long Islander. I left the Island (Central Islip) in ‘89 when I was 21 after a tour of duty in the Navy, but, it never leaves you. I grew up with a dad who had an AMC Jeepster Commando and going wheeling on the dunes. I’m in Northern Nevada now and, between the high desert and the Sierras, it is a veritable playground for all things Jeep. Keep up the great work you’re doing! You must know that your reach on RU-vid is huge and so, so needed.

@ProjectDanH Год назад

Thank you!! maybe ill retire out there one day! Thank you for your service, God bless!

@tomsmith2361 2 года назад

Great video Dan! Long live the XJ 👍😊

@ProjectDanH 2 года назад

Thanks brother! XJ for life!

@fleetofwjs1893 2 года назад

The index finger truly is the all time champion RTV applicator 🏆

@ProjectDanH 2 года назад

🤣🤣🤣 yes sir! Been caulking and RTVing for 30 years strong 😂😂😂

@CrimsonSlade 2 года назад

Oh yea! I know it's going to be a good day when I get a new episode of the project!

@ProjectDanH 2 года назад

You're the man bro! Thanks 💪

@Homeinmygardenwithmydog Год назад

GREAT video! Thanks so much for posting! I am in the middle of a similar, not quite as wrecked, project and this helped me so much! Mine is a 1998 Cherokee XJ Classic in Deep Amethyst Pearl with 187,000 miles on it.

@ProjectDanH Год назад

Glad it was helpful! Follow @justjeep_it on Instagram. he has an amethyst XJ too!

@myjeepwjarebuildpaulsteven7986 2 года назад

Great Video Dan. I did my Harmonic balancer and timing chain back in January. Made several mistakes and too much to comment about😂

@ProjectDanH 2 года назад

Lol! That's funny. I probably could have used a new harmonic balancer too!

@myjeepwjarebuildpaulsteven7986 2 года назад

First time I put it all back together, I was admiring my work and then later I noticed on the table,the chain tensioner😳 Took it apart, put it all back together, couple hours later looking at it I noticed on the floor the small section of oil pan gasket😭 lots of bad words…

@oldxj 2 года назад

Another great video! Thanks for adding another project to my list of projects!😁

@ProjectDanH 2 года назад

LMAO! I don't know if I should congratulate you or apologize! 🤣 Always work to do on a 20 yr old Jeep!

@SeanMalseed 2 года назад

Holy cow that cardboard trick is genius

@ProjectDanH 2 года назад

Lol, thanks Sean!

@DannerPlace Год назад

Nice work and very helpful video. Thanks for posting it.

@danhambrick6331 2 года назад

Nice job Brother.That chain was definitely ready to be replaced.👍👍👊

@ProjectDanH 2 года назад

Lol! There was definitely A LOT of play!

@wubbles5762 3 месяца назад

Great video! Got a big question hopping you might respond. I put a 99 TJ engine into my 93 XJ, and after about a year i noticed a knocking sound, decided to do a inspection of connecting rod bearings and all where okay, noticed timming chain was very loose, soo i decided to order a cloyes timming chain and new sprockets. when i pulled timming cover off i noticed the timming chain guide was broken into 3 peices, and very hard. well, the new timming kit was missing the chain guide but my father inlaw had a spare one, also kinda old and hard. anyways finished the install and the knocking noise was gone! was very happy, and then a month later it started comming back, and now its very bad on first start up but goes away quickly once its warmed up. my question is, can a timming chain guide on these 4.0L engines cause it to sound like its knocking, if its not there?? It more sounds like a clanking noise. or is the cloyes timming chain stretched over the last couple years lol... and without the guide is rattling against my timming cover?

@mclehed77 2 года назад

Nice job Dan it's coming along great 👍🏾😁

@ProjectDanH 2 года назад

Thanks 👍

@ryanmiller2639 Год назад

Always a pleasure

@jimhale8703 Год назад

I always put RTV on the balancer inside ... I have had them weep oil.

@ProjectDanH Год назад

Good tip!

@wyattandwill12 Год назад

I was considering doing this while I’m doing the RMS but I hate doing the harmonic balancer in the car so I may just cross that bridge when I have to one day

@jacobbutler9875 Год назад

I was wondering if that red stuff was loctite? Did you use it and the black gasket? Thanks for the video with the torque specs!

@claycoates5056 2 года назад

the better Idea is to just DO AWAY with the Fan All together and add an electric fan run cooler better MPG and just eliminates problems Important need to tuck some past or sealant on pan gasket and the corners where the pan reaches the timing cover that is a leek just waiting to happen

@ProjectDanH 2 года назад

It sealed very well, I did the rear main shortly after and re sealed the whole pan again. Never had a clutch fan issue... Maybe wel do an Efan mod later.. Thanks for watching!

@Motorcycle_Man 4 месяца назад

You know what's ironic about this, That bolt that was loose on yours and that fell out, Was the same exact way on my WJ. That could have honestly been catastrophic if it would have got caught behind the crank pulley

@andrewhelbling4347 2 года назад

Nice work Brother

@ProjectDanH 2 года назад

Thanks Andy!

@citizenatlrge 2 года назад

Story time- Had a '92, my ol' lady's, developed a ridiculous oil leak. Qt. a week, no joke. Nearly impossible to find b/c by the time I got to it, everything was caked and baked on and dripping all the way back to the tailpipe. Short story, I tried finding the highest, wettest oil. Used fluorescent dyes too.. They just got blown around too. Could've sworn it was coming from the timing chain area cover thing. Spent some srs time getting to learn new things. Replaced the chain, gears, etc.. Got it done right, still leaking like she just wanted to party all the time. I was mad. Still am 8+ yrs later, fr. Bought a compressor and tools just for that damn job. Lesson- Check your GD "oil filter adapter" o-rings. It's ONE bolt that's a pia to the block on passenger side when the filter is off. Firstly, triple check the o-ring set to actually fit like you need. I could not find them (x2) locally on the east coast at any box store. They're labeled to work, but nah for me. '92 OR '98 xjs. Amz to the rescue.

@jamesfarmer2748 11 месяцев назад

I hear ya. i have a 92 blazer had a huge oil leak that turned out to be the oil filter adapter o ring. I had to put die in to find it. the trick with die is to check as soon ap possible to see where it originates.

@Ozzy5610 2 года назад

Great job Dan. 👍🏼

@ProjectDanH 2 года назад

Thanks Brother!

@khndenmark 2 года назад

Hi and thanks for all the very helpful videos about the xj. My xj is from 1999 and I need a scan tool for it. Dan which scan tool would you recommend. Best regards from Denmark 😊

@ProjectDanH 2 года назад

Hey! Thanks for watching!! For android phones I use this... amzn.to/39IrV5B

@crashtke 2 года назад

Those clutch fan bolts are a pain coming off and worse going back on.

@ProjectDanH 2 года назад

yep! they're the worst!

@javiereliudguevara3138 2 года назад

Excelente video, me hubiera servido mucho hace 6 meses atrás 😅

@citizenatlrge 2 года назад

Translation w/DeepL - "Excellent video, I could have used it 6 months ago." I could've used it 8 years ago when I was chasing a oil leak in our '92.

@ProjectDanH 2 года назад

lol! Thanks for watching

@BobCummins 2 года назад

Great video.

@ProjectDanH 2 года назад

Thank you Bob! 👍

@misdemeanor85737 2 года назад

Good Vid 🖒🖒 Need to do mine !

@ProjectDanH 2 года назад

Thanks man! God speed!

@khndenmark 2 года назад

Nice job, thanks 😊

@ProjectDanH 2 года назад

Thank you !

@nickschepisi9867 3 месяца назад

dan on the camshaft bolt is it 50 ft pounds or 80 /on 96 jeep cherokee 4.0

@r.weaver3769 2 года назад

I need to do this on my 04 daily, my front seal leaks, and my rear main leaks. Gonna wait till fall, when temps are a little kinder. I got all the parts including timing chain, gears, oil pump and pickup tube just in case and while I'm there. Was gonna do my 95 too, but number 3 rod decided to start knocking a bit. Still quiet on startup but it's there along with 10 psi oil pressure at idle after warmed up. Yep, that one will get the engine yanked out...hmmm, maybe a stroker...

@ProjectDanH 2 года назад

Videos to come on Wrecked J include oil pan swap, oil pan gasket, oil pump, rear main seal, and connecting rod bearings... also a lift 😁

@r.weaver3769 2 года назад

@@ProjectDanH Awesome. I'm considering replacing rod bearings in my 95, but may just put a used unit. Low oil pressure.

@javihannymartinez1390 Год назад

buen video mi pana

@ProjectDanH Год назад

Thanks man!

@tmmyjay Год назад

Does it matter which stroke the no 1 cylinder is on?

@87fubar 2 года назад

I've seen there is a roller style chain set for these is that worthwhile or better to use factory style

@ProjectDanH 2 года назад

I honestly don't know... I do know that a other MOPAR timing chain will get you another 150k miles easily 😁

@87fubar 2 года назад

@@ProjectDanH my 95 sport is at 228k im sure its factory chain set

@citizenatlrge 2 года назад

@@ProjectDanH Right there.. That honesty, that- you don't know. Subscribed. We're all on this little blue dot to learn together. Lesson here - There are some things that you just don't skimp on. I don't think I've ever seen a list of those things now that I think about it.. Tires, brakes, shoes, and pillows off the top haha

@chrismcca 2 года назад

At what mileage do I need to think about doing the timing chain? I'm at 116k on a 1998 and the harmonic balancer needs doing as the rubber elements are failing; but I hadn't realised chains were an item to consider changing on the 4.0! Wouldn't want to ignore it if its on a count down.

@ProjectDanH 2 года назад

For the most part it only needs changed under the following circumstances: 1. When it breaks. 2. When it gets so loose it is scraping the timing cover. 3. When you are doing other work that requires removing it, opening the cover to do other work, etc. (a might as well while you're at it thing).

@Fort_Worth_Talaria 2 года назад

I have an annoying issue it’s that exact same little squeak at the very end of the video it’s stops and goes very like 2-3 seconds if someone could possibly answer why out xjs are doing it. In the video it starts when he starts up the car at the end.

@ProjectDanH 2 года назад

Get a new belt and make sure its tight!