2002-2006 Toyota Camry 2.4 Engine Rebuild | Pulling the Engine

Подписаться 26 тыс.

Просмотров 49 тыс.

50% 1

We will be pulling the engine out of this 2002 Toyota Camry to get rebuilt.
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoffee.com/ValleyMo...
🛒PARTLS LIST:
➦ Piston kit with rings: amzn.to/3vR4AcD
➦ Rod bearings: amzn.to/3ugMYWZ
➦ Crank main bearings: amzn.to/492jYky
➦ Crankshaft thrust washer: amzn.to/496OwSb
➦ Lower gasket set: amzn.to/4bdElNy
➦ RTV sealant: amzn.to/3SxlkhZ
➦ Assembly lube: amzn.to/3ua1pMD
➦ Timing kit: amzn.to/492lfYS
➦ Water pump: amzn.to/3OiAK70
➦ Head gasket set: amzn.to/3Oh76PF
➦ Head bolts: amzn.to/47J6NUE
🛒TOOLS:
➦ 1/2 Impact: amzn.to/3Sfmiht
➦ Impact socket set: amzn.to/3Hy3fKi
➦ Ratchet and wrench set: amzn.to/4b6K8ob
➦ Electric ratchet: amzn.to/3Sw4W12
➦ Prybar set: amzn.to/3IkSlWw
➦ Ring compressor: amzn.to/3Sbfq4G
➦ Torque wrench 1/4: amzn.to/493Xr70
➦ Torque wrench 1/2: amzn.to/3AgaOB2
➦ Crank holding tool: amzn.to/3yslzRH
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk.

Авто/Мото

Опубликовано:

11 май 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 67

@ahmadghosheh3104 7 месяцев назад

For anyone who is afraid of doing this on the Toyota 2.4. It's easy, really not hard. Bag and tag bolts and hardware, keep everything organized, and take your time. It looks like a mess with hoses and wires everywhere, but when you assmble it, everything falls in place. Plugs and hoses are long enough to reach so you don't get lost. I have not taken it out myself xi did the head gasket and head bolts and timing chain fix. I am decent DIY but It was my first deep dive. Worked perfectly

@narvanost 4 месяца назад

Quite an empowering DIY quote.

@jsderbycars1983 Месяц назад

Well time to pull my engine out as it blew up yesterday

@ValleyMobileAutomotive Месяц назад

Ah bummer 😕. Good news is these engines aren't the worst getting out.

@annawilstead7257 Год назад

Shavings on back of engine = insert drilling shavings. Someone had already been into that engine

@TheLadyAguilera 2 года назад

My engine blew out and I can't afford to take it to a professional. So I decided to do it myself. Love how you broke it down and shared the sizes that tools that would be needed for the job. Also how many bolt and nuts were in each area. Loved the video. I'll post my results on you next video

@ValleyMobileAutomotive 2 года назад

I hope your project goes well! If you have any questions feel free to send them in the comments 👍

@danaholland5922 Год назад

I have a 4 cylinder 2.4 l engine code 2AZFE 2007 Toyota Camry does this video apply to my car. How how big of a engine lift do I need. thanking you in advance my brother wonderful video

@richardstrande6469 Год назад

@@danaholland5922 it does, the engine itself if (if I remember correctly is about just under 300lb) so one that can handle half a ton in weight (certain engine hoist have different adjustments for different weights)

@MrAloha999 Год назад

I'm next on taking this motor out this weekend....how is yours going TheladyAguilera?

@jamesmcnamara7484 10 месяцев назад

I’m about to do an engine swap on one of these to help a coworker. I generally won’t own or work on junk after obd2/airbags….appreciate the detailed video!

@ia4687 2 года назад

Hey brother you are a great mechanic. I love your videos. Appreciate you sharing your knowledge and skills with the rest of us.. I'd buy you a beer anytime.

@ValleyMobileAutomotive 2 года назад

Thanks man I appreciate it 👊

@alandust2188 2 года назад

Looking forward to the next one!

@dittmerg 3 месяца назад

Excellent job!

@garyg9484 10 месяцев назад

Thanks for your HELP

@chasenoorda9931 11 месяцев назад

Thank your for this video!!

@harley7003 Месяц назад

Great job good vid

@2000xtremefocus Год назад

Great video!

@aros007z 8 месяцев назад

Awesomeness

@tonykerkhof3268 Год назад

hi, thanks for awesome video... just want to know can i pull the motor just as easy with the trans still on after disconnecting the drive shafts?

@bdogg20101 3 месяца назад

Thats interesting. Same thing happened to me. Saim Coil #3.

@SidineMabruk 2 месяца назад

❤❤🎉 Good Job my friend ❤❤❤❤❤

@jhonvillanueva3905 Год назад

Great knowledge of yours. I appreciate the videos. I have a 2008 Toyota RAV4 2.4L (2AZ-FE engine) and now burning oil. Car is under toyota technical bulletin T-SB-094-11 (Oil consumptions). I have zero skills about engine and I am seeking for an advice on how and where my RAV4 can be repaired. I'm from Virginia Beach VA. Car is being used by my daughter in college and I am concerned for her safety.Recommendation on service locations near me is greatly appreciated. Thank you.

@guymann4016 Год назад

Hello! Thank you taking the time creating this. How much (ballpark) should a guy expect a shop to quote this? Labor hours…engine cost is a big variable I suppose depending.

@ValleyMobileAutomotive Год назад

When rebuilding an engine the cost in labor is far more than the cost of parts. I believe this car took about 30hrs labor. Times that by the shop's hourly rate and you are around $3k. Then add the parts you're looking at about $4-5k plus tax. If the rest of the car is in good shape though you should get a long life out of a rebuilt engine.

@dkkauffmanjr Год назад

So how much difference if it's a manual version of the same car? Is it possible to pull just the engine while keeping the manual trans in the car? Because of the extended length of the input shaft of the manual trans.

@JohnSmith-mi8ov Год назад

Great video. Thank you very much. Could you share the approximate labor cost for this job.

@ValleyMobileAutomotive Год назад

Hey thanks! This was a 33hr job. Multiply that by your shop's hourly rate. It's easier swapping an already rebuilt engine but it's cheaper to rebuild the one you already have. And it's fun too 🙂

@passion830217 Год назад

Great work! Mine has 167k miles now, and it runs smoothly. I hope it will run into troubles soon. I am wondering how many miles were on the car when the work was done. Thanks!

@ValleyMobileAutomotive Год назад

These are great cars overall. This engine had around 260k. The only reason they wanted to rebuild it was because it consumed oil. Other than that it didn't have any major engine issues.

@passion830217 Год назад

@@ValleyMobileAutomotive I hope mine will get to 260k. My engine uses 1 quart 1000 miles of highway miles (65-70 MPH more than 2 hours to be considered highway miles). It does not burn oil if I just drive it in city miles.

@mdkzztop 5 месяцев назад

@@ValleyMobileAutomotive My sons 2005 has 305,000 miles and was using about 1 quart every 1500 miles. It ran smooth but one of the fans broke and it overheated blowing a head gasket! It had oil in behind the thermostat. I am thinking about just swapping out the engine with another from a scrap yard. Curios as to how much a rebuild cost though?

@jessehortin9091 Год назад

What are the size of the tabs you used to mound the chains to the hoist

@ihabomar4934 Год назад

I highly appreciate your videos. I’m changing my whole engine for my 03 Camry. How can I choose a good used engine? Do you think a lot of parts ( while dismounting the engine ) will be broken, I’m afraid my budget will not be enough !

@ValleyMobileAutomotive Год назад

Getting a used engine is always a gamble because you don't know the history of the vehicle it came out of. If you can rebuild your current engine that would be the cheapest if you are doing the work yourself. There shouldn't be many things that break, on this vehicle the biggest broken item was the belt tensioner which is no big deal to replace. Everything else came off nicely. We don't have rust issues here so if you do where you live take that into consideration.

@ihabomar4934 Год назад

@@ValleyMobileAutomotive thanks a lot for your valuable reply. Let me see what will happen. To rebuild the current engine is also a kind of gamble, as it’s not me who will do it, so I don’t know what kind of parts the mechanic will use then I’ll enter into repairing the new parts after a while !!! Thanks anyway 👍👍👍

@CornHugs Год назад

@@ihabomar4934how did it go?

@mynewhaircut Год назад

Im working on the same engine right now and i am trying to figure out where the oil coming out of on the right side of the engine. Its pouring out from somewhere over there. Does this engine have a oil cooler or oil lines? Thanks for your help

@ValleyMobileAutomotive Год назад

There aren't any oil cooler lines but there are a few places where a leak can come from. Oil filter, front cover, front crank seal, power steering pump or lines...

@sergioramirez1693 2 года назад

If you don’t mind me asking what was wrong with the engine. I myself recently got a 02 camry le with cylinder codes when i bought it & a 02 oxygen sensor code. But car runs good.

@ValleyMobileAutomotive 2 года назад

The customer said it was eating a ton of oil between oil changes.

@alanjoseph3703 8 месяцев назад

❤ just wondering is it worth buying a 2004 camry manual 2.4l for $3,300 USD. Has 120,000 miles. I would love to hear your opinion. ☺️

@ValleyMobileAutomotive 8 месяцев назад

These are good cars. They do tend to burn oil so that's something to keep an eye on if you purchase it. It could be a good price if the car is in great shape. Make sure you have a trusted mechanic or friend look it over before you buy.

@BikirAndriy 10 месяцев назад

Hey, thank you for the video! Those 6 bolts left, behind the squared plastic cover, between engine and transmission. How to turn the engine to reach each bolt?? Thank you in advance))

@ValleyMobileAutomotive 10 месяцев назад

You can use a ratchet and socket on the crank shaft pulley bolt. Turn the engine clockwise to get access to each bolt. You can also hold the engine from spinning while getting those bolts loose.

@BikirAndriy 10 месяцев назад

@@ValleyMobileAutomotive Thank you very much!! This is firs time I’m swapping an engine)

@BikirAndriy 10 месяцев назад

Hello again) Engine is stuck (it’s blocked). The only idea I have now is to pull it together with transmission. please advice is there any better way. thank you!!

@ValleyMobileAutomotive 10 месяцев назад

Where is it stuck? It should come out without the transmission

@BikirAndriy 9 месяцев назад

@@ValleyMobileAutomotivethank you! I have replaced an engine together with transmission and whole wiring on the engine. I have took engine from 2004 LE and have put it in 2002 XLE - I have voltage on ignition coils but no spark at all. should I go to swap ECU? maybe there is something I should doule check? thank you in advance!

@ValleyMobileAutomotive 9 месяцев назад

@@BikirAndriy see if the injectors are working. If you don't have spark or injection then you may be dealing with a crank sensor or crank sensor wiring issue.

@BikirAndriy 9 месяцев назад

Thank you I will try this. I really appreciate you sharing your knowledge with me and other folks who can read this.

@AB-yc1np 4 месяца назад

approximately how long did it take you to pull out the engine.

@johnmonk3381 4 месяца назад

I'm trying to change the engine mount on the right passenger side for a 2005 camry but I am worried about damaging the transmission if I lift the engine too much without lifting the transmission at the same time. So I am wondering should I loosen all the top nuts of all 3 mounts at the bottom, then remove the torque strut mount at the top and then lift BOTH engine and transmission at the same time, get the RH engine mount out in order to avoid damaging the transmission and possibly break any seals and cause an oil leak? Ideas? Thanks.

@ValleyMobileAutomotive 4 месяца назад

You will be fine jacking the engine up without unbolting any other mount. If it's a manual transmission there is a lateral control rod behind the CV axle that needs to be unbolted but not on the automatic. The engine will clear the mount just fine 👍

@johnmonk3381 4 месяца назад

@@ValleyMobileAutomotive thanks 👍🏻

@mazinalansari88 Год назад

Hey bro What is the most durable aftermarket rebuild components? Who make the best components?

@ValleyMobileAutomotive Год назад

Melling is a good brand but they can be expensive sometimes. DNJ is pretty popular. Many rebuild kits like EngineTech use some components from DNJ. In my opinion FelPro makes some of the best gaskets. Hope this helps some 👍

@mazinalansari88 Год назад

@Valley Mobile Automotive yes it helped. Will keep it in mind for my next rebuild. I had to install low mileage japan imported engine this time.

@the1jackel 2 года назад

would a 2005 toyota highlander 2.4 be about the same way to pull

@ValleyMobileAutomotive 2 года назад

Yeah, it should be very similar to pull the engine.

@juliusmwanzia-mo9ob 2 месяца назад

Isuzu dmax 2:36

@ruddytadeo 11 месяцев назад

hi have cuestion the ingine 2005 is goo on 2007

@chidi7958 8 месяцев назад

I am in Minnesota. Can you help rebuild my 2003 camry engine?

@Z-Ack 4 месяца назад

Ive got every last bolt off of the damn thing, all the flywheel bolts out, all motor mounts out, no hoses or wires and the damn thing will not detach.. cant even break the seal..

@ValleyMobileAutomotive 4 месяца назад

There are two dowels near the top of the bell housing. One towards the front and one towards the back side. Sometimes those are hard to break free. The only thing I can think of if everything is unbolted is a long breaker bar for leverage.

@bdogg20101 3 месяца назад

Either that or you could get fried.