Тёмный

2003 - 2007 Honda Accord Radio Install 

Provo Beast Audio Installation
Подписаться 132 тыс.
Просмотров 375 тыс.
50% 1

Parts linked in the description below!
Watch a full tutorial as a 2006 Honda Accord will have a brand new Pioneer Bluetooth radio installed DEH-S4100BT. This radio install and kit retains the factory radio / Air Conditioning / Heater (HVAC) functionality and while adding a Bluetooth radio for better sound quality.
This video applies to Honda Accord models for years 2003, 2004, 2005, 2006, and 2007. This video also includes dash trim and stereo removal, radio wiring, programming, and installation.
Click here to see the AUX / USB Adapter only install on this car:
• 2003 - 2007 Honda Acco...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts Used (Amazon Associate Paid Links):
*Metra 99-7862 Lower Dash Single DIN Installation Kit for Accord: amzn.to/2SeoCdx
--For dobuel din
*Pioneer DEH-S4100BT: amzn.to/3fTLw2X
*If you wish to replace the factory radio completely, use this kit: Metra 99-7803G Single/Double DIN Installation Kit with Display: amzn.to/3imupIM
Disclosure: As an Amazon Associate I earn from qualifying purchases

Опубликовано:

 

6 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 321   
@ProvoBeastAudio
@ProvoBeastAudio 3 года назад
Parts linked in the description below!
@tommylee2411
@tommylee2411 3 года назад
My radios been broken for over 5 months finally gonna install a cheap aftermarket single din from Walmart later tonight, thanks for the video
@op_cloud8829
@op_cloud8829 2 года назад
Did it work my radio in my accord is also broken and makes crackle sounds and pops everytime I turn the radio on did this work for you?
@raulnavejar474
@raulnavejar474 2 года назад
@@op_cloud8829 mine does the same as well. I'm thinking it's the speakers.
@lcsvlone2811
@lcsvlone2811 Год назад
@@raulnavejar474 it’s not. Just upgraded to full skar tx series 6.5’s and 6x9’s, they still crackle. You need a quality radio with a built in amp(preferably under 50w)
@keitholiver9413
@keitholiver9413 5 месяцев назад
@@raulnavejar474uuuuuuuu😅
@njrichg792
@njrichg792 2 года назад
Good install video... Just a couple notes that might also help: Pause at 8:56. Look on the left side of the open cabinet and see one on the right side too, there are thin plastic open squares. These cars are old and those plastic frames are very thin. When putting in the new kit and getting it to seat under the A/C controls on the front panel, don't push too hard or these clips might break and they are irreplaceable. If that does happen the install will still work, as the screws that keep the lower part of the kit in place will hold, but the top part of the panel will have a small gap unless you attach something to the top, so go ahead and crazy glue a couple of plastic L brackets or use a 3M self adhesive strip under the A/C control panel to keep the top part in it's proper place. Also you don't have to pull the whole old radio out to get the antenna wire. It is in a type of ziptie with a plastic squeeze clip holding it in place. use needle nose pliers do dismount it and then the cable will drop into the space below. Depending on the stereo you're putting in, you may still need a 6"-12" extender. If you do use one use electrical tape to keep the old antenna cable securely connected to the extender. Finally, the kits themselves are kind of flimsy, so add electrical tape around the stereo insert sleeve and the kit to prevent rattling sounds.
@jordonpeters1793
@jordonpeters1793 3 года назад
Now i need a more detailed tutorial on the wiring work that you did
@silenceisbliss9509
@silenceisbliss9509 Месяц назад
If you are putting in an aftermarket stereo into the car just match the colors coming off the t-harness
@jersey123rich
@jersey123rich 4 года назад
I recently used this video to install a stereo into my '07 Accord when the old stereo crapped out. Unfortunately, I work 80 miles away from home in a high crime area and a car thief broke in to steal my new car stereo. He/She failed, because when I followed this awesome video I noticed after I was done that the back end of the kenwood head unit was a bit heavy and this made the insert sleeve rattle a bit when driving, so I pulled it all out and wrapped some duct tape around the head unit and insert sleeve to make it sit tighter. So when the thief tried to use the metal removal sticks to pull it out they couldn't get it. :) So if you have car thief concerns or rattle sound concerns wrap some duct tape around the head unit and insert sleeve during your initial install. Also Advise that you use a magnetic tipped screwdriver to avoid losing screws down the hole.
@jackduncan6818
@jackduncan6818 4 года назад
Planning a radio install tomorrow in my ‘04, thanks for the info!
@sktfan3843
@sktfan3843 3 года назад
This is the correct way on how-to video the install very detailed, thank you very much!!! You got one subscription from me. Watching here from down under.
@premsai6986
@premsai6986 6 лет назад
Thank you. This video helped me to fix my radio problem in my honda accord.
@op_cloud8829
@op_cloud8829 2 года назад
What was your problem with your Honda Accord radio my radio in my car is static and won’t play the radio?
@gabbycampbell4390
@gabbycampbell4390 4 года назад
I can't wait till I can work on my accord. I already had a radio I bought for a chrysler and it fits my accord as well so this saved me a ton of money until I'm ready to really pour money into a good, full on radio replacement. Will update after I work on it! 😂
@Moemoe-st3yp
@Moemoe-st3yp 4 года назад
did u finish working on it :P
@gabbycampbell4390
@gabbycampbell4390 4 года назад
@@Moemoe-st3yp no my loved one refused to let me do it. so they wasted a grand to get a whole new radio put in. I appreciate it but I could've put this one in!!
@Moemoe-st3yp
@Moemoe-st3yp 4 года назад
@gabby campbell omg 1 grand thats a lot of money that could've been used for something else but its honestly a easy job just need patients & thank you for replying also you sounded excited to work on it.
@Steviesbestsong
@Steviesbestsong 2 года назад
Thank you SOO much for this DETAILED VIDEO! I’ve been watching videos and researching for months and finally got the courage to replace my radio. This video answered all my questions! Thanks again!
@ProvoBeastAudio
@ProvoBeastAudio 2 года назад
Glad it was helpful!
@anotherhorrorstory4467
@anotherhorrorstory4467 Год назад
@@ProvoBeastAudio Hey are you available
@ProvoBeastAudio
@ProvoBeastAudio Год назад
@@anotherhorrorstory4467 Feel free to send us a message on facebook.
@thehectonator9677
@thehectonator9677 4 года назад
Very helpful video and good installation. The guy installing my new car stereo told me that I would have to keep my old stereo in and install the new one on the bottom. Just like in this video. So now i know what to expect and now i have a idea of what its going to look like. I also heard this guy say that he had to keeo the factory stereo too.
@elvergalarga69
@elvergalarga69 9 месяцев назад
Man i just bought a 2004 accord cause it was cheap andbeverything was in jice condition EXCEPT the radio. The middle plastic console was missing, and there was a mess of wires. FINALLY after seeing your video i know all i gotta do is disconnect the dumb wire harness and reconnect the original to the back of the radio, hipefully that works!
@albertinon1
@albertinon1 2 года назад
Thanks a lot for the video, everything you explained here worked for me and my '07 accord LX, my Kenwood sounds nice and clean!
@braigwoodjizzle
@braigwoodjizzle 5 лет назад
This worked perfectly for my 2003 Honda
@markavalos9149
@markavalos9149 4 года назад
Braigwood Music Group what radio did you use?
@jacobduarte9088
@jacobduarte9088 2 года назад
But what if your factory radio is draining the battery how do you just put power to the new deck?
@richardmurrain5229
@richardmurrain5229 4 года назад
Thank you, thank you. Your video was the best, the clearest and the most informative. Excellent, thank you again.
@TomM-bp9oz
@TomM-bp9oz 5 лет назад
Thank you for this video.. installed it successfully! saved a lot of $$
@andrewarriaga2787
@andrewarriaga2787 2 года назад
Radio coming this friday can’t wait for the install 😁
@greggmyers7505
@greggmyers7505 6 лет назад
Great video! Crutchfield's instructions were average but with your help it all went smooth
@pshycomike
@pshycomike 4 года назад
Like a glove !
@moisesarispe1
@moisesarispe1 2 года назад
Really good video bro everything worked out perfect the only thing is that I got a different stereo and I could not make the radio work but other than that everything is working awesome 👍🏼
@pinoyrunningpenguin
@pinoyrunningpenguin 4 года назад
This is also how the audio shop installed mine .At first I was not happy because its like retaining the bad tooth is still there. But this is probably the simplest with not much problem
@ProvoBeastAudio
@ProvoBeastAudio 4 года назад
Cheapest option for sure.
@rogergagnon1431
@rogergagnon1431 Год назад
Thanks for the video! I have repaired my old Accord2003 for 125$can.
@MrCleanEmpire
@MrCleanEmpire 2 года назад
Going to try this out with a used stereo cos why not worst that can happen is i get all sweaty.. 🤷🏽 I got a cheap boss stereo coming in tomorrow too!
@scorpiontube712
@scorpiontube712 3 года назад
My 2005 honda accord radio turn on and off by it self. Question if i add another radio would it fix that problem too cause right now i just took off the radio fuse and not use the radio. Thanks!
@TMYTUTN38
@TMYTUTN38 4 месяца назад
Great job explaining the process. Thanks !
@brandenvargas4268
@brandenvargas4268 2 года назад
Thanks alot for your help u made it nice and easy for me stress free on how to replace the radio in a inexpensive still sleek look thanks alot
@rastomasstanford7708
@rastomasstanford7708 2 года назад
I have this radio in my car I just bought,and who ever installed it must of put it in the wrong hole. But it works ok. Just every bump makes it skip in n out. I will try and fix it soon as I can.
@abrahamdasilva4102
@abrahamdasilva4102 4 года назад
Great video helped me out a lot I really appreciate it 💯💪🏾
@garystoliby7219
@garystoliby7219 2 года назад
I had car toys install mine about 7 years ago. About two years ago, something happened with the factory stereo. It just stopped showing anything on the display. No big deal. I had to unhook my battery for repairs and when I hooked it back up, it reset the factory stereo and the display was working again. A couple of months go by and it goes out again. This has happened 3 or 4 times now. The last time and it appears this time, the backlight and CD inserted light stay on when the car is off and key out of the ignition. It stays on all of the time. The last time it drained my battery completely. I'm trying to prevent that this time. How can I fix this? Cut a specific wire on the stereo harness?
@JC-ml8lb
@JC-ml8lb 2 месяца назад
Great video! This worked just as great. The only thing that doesn’t work is the steering wheel controls. Any tips?
@ManicxToast
@ManicxToast 4 года назад
There's separate wire harnesses for HVAC controls and the radio entirely so I don't understand why you have to run the wire back to the stock radio. I have mine completely removed because it burned out but my AC still works because it has a separate harness. So tell me why is the run back to the stock radio needed if you already have the new harness connected to the stock radio control harness?
@Scatpack23
@Scatpack23 3 года назад
My radio went out about a year ago I've been using a bluetooth speaker to play music off of since then but I just ordered the kit and a radio I'll comment when I hook it up when it comes in
@leofoster9765
@leofoster9765 2 года назад
That mf still work or wuh??
@Scatpack23
@Scatpack23 2 года назад
@@leofoster9765 yeah it does
@SillySaad
@SillySaad 5 лет назад
Thank you for the detailed instructions!
@velazquez54321
@velazquez54321 4 года назад
MMf
@JamesRuddJones
@JamesRuddJones 5 лет назад
Just finished my conversion after a huge ordeal! Some of the connector slots which have double wires weren't soldered correctly causing no power to flow to either new harness plug! Since fixing these the harness works perfectly
@cristianperez1120
@cristianperez1120 5 лет назад
I installed mine and it worked for one day and then i hit a bump on the road and it turned off what do u think could be the problem i reconnected everything and still doesnt work
@JamesRuddJones
@JamesRuddJones 5 лет назад
@@cristianperez1120 could be a dodgy connection in the harness or your soldering/crimping! Should try and check the constant and key wires for 12v
@cristianperez1120
@cristianperez1120 5 лет назад
Could u briefly explain what you mean
@JamesRuddJones
@JamesRuddJones 5 лет назад
@@cristianperez1120 if you just have the t harness plugged in, use a multimeter and put the negative side on an area of bare metal in the car and the positive in one of the plugs slot for constant voltage and see if 12v shows, and when the ignition key is on check the key wire for 12v. If you haven't got anything showing for either wire then that's why it's not working
@largepizza3341
@largepizza3341 3 года назад
The heat and ac run off separate power so you really dont need this harness just get the lower dash mount and a regular harness
@Itsmaarioo
@Itsmaarioo Год назад
Was looking for this comment because I’m about to wire a pioneer with just the radio harness adapter
@johnmacmillan627
@johnmacmillan627 2 года назад
Thx, just what I was looking for!
@simoncrow7040
@simoncrow7040 3 года назад
currently doing this with my mom
@F.U.B396
@F.U.B396 9 месяцев назад
I bought this car off a guy and he did the same thing I’m switching it back to stock how do I do that bc it’s not wanting to work anymore
@jerekarpinen7056
@jerekarpinen7056 4 года назад
Hey! I just installed my new 1 din radio and everything is working just fine but my original radio's screen won't go on. How to solve this problem? HVAC works also fine and has background lights too. I used honda ISO adapter and plugged all wires correctly
@sleepylol2054
@sleepylol2054 2 года назад
worked. thank you good sir.
@ProvoBeastAudio
@ProvoBeastAudio 2 года назад
You're welcome!
@gabrielpw.
@gabrielpw. 5 лет назад
Im going to assume if my aftermarket radio is cheap and has 2 seperate harness connectors I just marry as many colors as possible?
@robwesker
@robwesker Год назад
This is great, but now I’m having issues with my unit and need to take it out to check for a blown fuse. How does one take it out safely? Do you need to remove everything like you did to install it?
@nickstacer3461
@nickstacer3461 Месяц назад
Have any videos on 03 Camry for a single din setup
@tonylove4192
@tonylove4192 3 года назад
great job the information was very helpful
@nascr7_47
@nascr7_47 4 года назад
double din should work too right
@adanarceo4636
@adanarceo4636 4 года назад
Thanks for the tips, this is very helpful 👍👍👍
@kevinloiyza6615
@kevinloiyza6615 5 лет назад
Hey great video the visual walk though is helpfull when doing an install like this. I was wondering if you used the brackets that came with the kit and what they are used for exactly?
@ChefBoiImHungry
@ChefBoiImHungry 2 года назад
the ring kit that came with the metra kit dont fit the hole to small! the radio trim fits but doesnt fill the entire gaps...looks like shit! any ideas?
@ChristinaApril23
@ChristinaApril23 4 месяца назад
Compatible for 2003-2007 models
@kevinloiyza6615
@kevinloiyza6615 5 лет назад
Do you know what wires you connected back into the factory radio for the hvac system only
@karamjeetsingh108
@karamjeetsingh108 Год назад
Hey i got honda accord 2007 4d. My car problem is stereo and defogger lines are not working. All grid lines are getting the power except upper three wires which are antenna wires. And at the end, antenna wire doesn’t have the power. So, Should i change the stereo or just fix the antenna wire?
@londongangster1
@londongangster1 11 месяцев назад
Hey dude I have done mine long time ago and its all good and works just fine for my old honda.Question is,can you see on the display anything like aircon if its on or off,coz I might have mixed up some wire and mine does not show anything on screen its dead,but all butons works fine?
@peatoken457
@peatoken457 Год назад
Thanks for the very helpful video. Can you tell me; will this work with Honda's Premium Sound System? 🤔
@Renault-v10
@Renault-v10 3 года назад
Same procedure on the navigation system?
@KhanvictMuzic99
@KhanvictMuzic99 5 лет назад
Hey i have a 2003 honda accord sedan single disk stereo. So my stereo decides to turn on and off whenever it wants. It mostly doesn’t work. Apparently its a common problem. If i do your Bluetooth radio install will it fix the issue ? Because it seems like the new radio you install runs off the original one. And since my original one is not working, what will happen?
@muntasirjamal
@muntasirjamal 5 лет назад
I have the same question
@slimer2135
@slimer2135 3 года назад
So before. Radio would turn on. Didn't put out any sound. HVAC controls still worked. Decided to try this video. Plugged it in, new radio shows nothing, old radio shows nothing. Took the harness out, saw some wires weren't attached. Recrimped them and plugged the harness back in. Still nothing. Decided to plug the old radio back in without the harness, showing nothing, no clock, no sound, HVAC still working. What are your thoughts? Is this still fixable?
@yllenlopez4330
@yllenlopez4330 3 года назад
Thank you this really helped!
@isaackhan6529
@isaackhan6529 3 года назад
Great video, thanks champ!
@dcrooks33
@dcrooks33 5 лет назад
here a ? got a friend has a 07 honda accord she say her radio will not come on if i replace everything like this say will she have power to the bottom radio if her top 1 doesnt work or will i have to bypas the power wire like i have done in the past to older vehicles
@Warrior_Resisting_Colonialism
@Warrior_Resisting_Colonialism 5 лет назад
There are two types of HVAC controls. If they are built into the radio then you need to check fuses and make sure power goes to the radio so it works. If it's getting power and still not working,make sure the constant power is getting there too. If both 12V are there and it's still not working,then the factory radio with built in HVAC needs to get replaced. This is needed for HVAC regardless if you get a aftermarket radio. If you have EXTERNAL HVAC radio and you don't need power to that old radio for anything,then who cares? Test for power and it's dead,run new fused lines if needed or if there is power then just install the pigtail and the new radio will work. You'll of course need to make sure the external HVAC is still getting power,which it should anyway.
@Carlos-od6uq
@Carlos-od6uq 2 года назад
I tried doing this yesterday but the new stereo doesn’t turn on either so idk what going on in this car I have 07 accord
@andrewnewkirk3109
@andrewnewkirk3109 Год назад
Aloha. Have a quick question but not sure if you monitor this anymore. Looks like it's been a while. If so, is it possible to hook into the back of the white port on a factory installed Panasonic 39175-SDA-L110 radio in an '04 Honda Accord which also has a factory 6-CD changer and Sirius Radio? Console (Radio) face is 7BK1. All the videos I see simply suggest plugging into a white (Aux port) facing down twds the floor of the car. My radio only has the white port (right next to the blue one) facing fwd (twds the front of the car) on the BACK of the radio. Any help would be much appreciated. Thanks.
@juanmoreno5187
@juanmoreno5187 6 месяцев назад
Mine doesn’t turn on when the car is on or turn off when the car is off
@aureliandumitru6877
@aureliandumitru6877 2 года назад
Where does the satellite antena go - on the dash? Will the wire hang around? For the reverse camera do we have to drill a whole for the cable in the back of the car?
@mryony23able
@mryony23able Год назад
Nice video thanks .,help me a lot 😊
@ProvoBeastAudio
@ProvoBeastAudio Год назад
Glad it helped!
@topshottadondada6805
@topshottadondada6805 2 года назад
Would this be compatible with the 05 Accord ex-L with nav ? My nav system doesn't turn on but the air and backlights and everything works. Can't play music or use a/c tho bc it doesn't power on.
@voiceoftheholy
@voiceoftheholy 27 дней назад
Thank you 🙏🏻
@MeBzrk
@MeBzrk 3 года назад
I put a jvc kd-sr60 radio in my 2007 accord. It powers up but I have no sound coming out my speakers. Fuses are good. It’s the same radio I used to have in the car. Any help would be great!
@missmeyon
@missmeyon 4 года назад
My factory radio doesn't even come on. I didn't install the aftermarket radio. When I bought the car, it was like that.
@ernestomejia3905
@ernestomejia3905 5 лет назад
GREAT JOB, THANKS
@faiumutaamu4893
@faiumutaamu4893 2 года назад
How can I have the factory radio not work at all because it drains my battery? I have a pioneer system as well. I took out the fuse for radio and my battery doesn't drain. Factory radio is bad. Help please.
@garystoliby7219
@garystoliby7219 2 года назад
I'm having the same issue
@jagfull
@jagfull 6 лет назад
great video , Thanks PB
@ProvoBeastAudio
@ProvoBeastAudio 6 лет назад
Subscribe!
@alejandromedina9896
@alejandromedina9896 Год назад
I have a 2007 accord with stereo sony model DSX 415 bt, I bought a wire harness 99-7862 with this everything is fine. The next step is to connect the steering wheel with the stereo, the problem was what type of connection did I need to buy and what number. Thank you for your time and I hope you can help me to find the correct wire harness to connect the stereo with the steering wheel note: the steering wheel is original honda accord ex 2007 thanks again
@ProvoBeastAudio
@ProvoBeastAudio Год назад
Send us a message on facebook and we can assist you further.
@activvortex1483
@activvortex1483 Год назад
Does this work for accords with dual A/C? I can see in the video this accord has the base option for A/C.
@sujalrocks6145
@sujalrocks6145 4 года назад
Hi, i installed new radio stereo from mechanics nd it's working perfectly but i can't see any info like heating or cooling option or in simple word display shows nothing, when i asked mechanics he said its like this coz we gave all power to new one..but aftr watching your video it's possible to show up light nd info at factory stereo..so in this case what mistake would hv done by my mechanics???
@daneworthington3225
@daneworthington3225 3 года назад
Would this install work with a pioneer deh-s4220bt? It looks like the model used in your video is tough to find in stock
@Paznonsense575
@Paznonsense575 Год назад
Hell yes
@josephlechette6264
@josephlechette6264 3 года назад
Do you need to add the Bluetooth microphone? That allows you to speak through "the car" during a phone call and is not necessary for installation if I'm right
@omnitravis
@omnitravis 3 года назад
All the AC/heater dials and buttons still function, as well as the alarm system? That is why is it wired through the old radio, correct?
@Brandon-yg7mw
@Brandon-yg7mw 4 года назад
You kind of glossed.over the part where you actually plug it in im.not sure how you do that
@atelerix969
@atelerix969 4 года назад
You mean plugging in the new head unit? It's quite simple, the last remaining connector on the wiring harness will plug in to the connection port on the back of the new head unit. Same with the mic cable and the radio antenna wire.
@jesusgastelum2950
@jesusgastelum2950 3 года назад
My radio screen went bad and I put new battery and needs the code will that affect the new stereo
@pedropablo2o1o
@pedropablo2o1o 3 года назад
I have done all the process , but I have very little sound , after passing the 16 on my new stereo it has a lot static and not very good sound, thanks in advance for any advice .
@waatao9856
@waatao9856 3 года назад
Idk how to ground it the one that came with my head unit has like a hook on it to hold the screw in. The one that came with the eBay fascia it's just a white where do I connect it on the hook??
@Jawshwa
@Jawshwa 3 года назад
I have sound when car is on accessory. But no sound when car is started. Any idea?
@marceline8488
@marceline8488 3 года назад
My rear speakers aren't working. Any tips on how to troubleshoot??
@Scatpack23
@Scatpack23 3 года назад
Is there a wiring diagram?
@isaiahyjsmith2372
@isaiahyjsmith2372 Год назад
What is it that I need for my factory steering wheel controls to work with it?
@Pat_rick_W
@Pat_rick_W 4 года назад
Got mine working and when I went to insert it into the empty pocket it fell in and some wires disconnected. After reconnecting them I can’t get any power to the stereo. Fuck my life.
@shamschowdhury7973
@shamschowdhury7973 5 лет назад
Hello there...I have gone through most of the part of your instructions without a problem...so kudos on that! 👍 However I just cannot detach the harness connected to the factory radio. I’ve used a lot of pressure and pulling in different ways but it would not come out. Is there a special technique to pull it out? Please help! Thanks :)
@Warrior_Resisting_Colonialism
@Warrior_Resisting_Colonialism 5 лет назад
I'm sure you figured it out by now but there's a clip you need to press inward on,in the middle on one side. It's not much more work to just unbolt the radio and remove it. You'll need an extension cable for the antenna and need to do it anyway. With the whole radio swung outward you can get at the clip much easier.
@oakgarage3834
@oakgarage3834 3 года назад
Will this installation work on a 03’ accord with navigation system?
@odog9003
@odog9003 3 года назад
I can assure you it does, it had a few more steps for me but I got it done and it works great! You need to take the old radio out, you do this part by unscrewing the 3 screws under the air vent. Then you un plug the same cables he un plugs and run them to where you need them to be, while you’re there might as well un do the Antenna as well. Then once you have those wires all ready to pair you can start the butt connectors like he did and plug the HVAC controls back to where you took the cables out and screw your navigation system/ radio back in. And then you can pretty much follow his steps. Hope this helps, any other questions or unclairities I’ll try to help iron it out!
@forestthompson3141
@forestthompson3141 Год назад
My 04 accord came like this, it works great but after awhile I wanted to put the cubby back in for more room and to make it look neater, would it be the same process just backwards to remove it?
@christophermack250
@christophermack250 Год назад
Question in your 04 did you have to do anything different to get the radio to play. I have all wires connected, both systems power on, but there is no sound
@anthonym2701
@anthonym2701 Год назад
Do you know how I can disconnect the stock radio without interfering with HVAC controls ? I put my custom radio in but can’t stop the stock radio from turning on randomly. Just wanna disconnect it but not sure which wire , thanks !
@lukasstone4199
@lukasstone4199 Год назад
Hey man did you ever find the solution I have the same problem?
@anthonym2701
@anthonym2701 Год назад
@@lukasstone4199 hey unfortunately not I tried to locate exact wiring to cut the radio power but didn’t wanna risk it. I’m sure there’s a solution but might take digging
@chrispadilla8848
@chrispadilla8848 Год назад
Nice video. I've watched several and I think yours is the only one I've seen where the old stereo wasn't removed. Question, though. I installed a double din stereo in my son's 07 Accord using the kit and instructions from Crutchfield. Ever since then, the HVAC controls don't completely work. I can't change where the air blows and the backing on the knobs doesn't work. One big difference between my install and yours is that you spliced some circuits back to the old head unit and my kit didn't say to do that. Can you confirm if not powering the old stereo also doesn't power the HVAC controls?
@ProvoBeastAudio
@ProvoBeastAudio Год назад
With the kit we used, it required to keep the factory heating and air controls as they share power and some data functions. Without the right kit, it may give you issues. Try retuning the car back to stock wiring to see if that fixes the issue. If it does, you need a different kit for the new radio.
@chrispadilla8848
@chrispadilla8848 Год назад
@@ProvoBeastAudio thanks for the feedback. I've been in touch with Crutchfield. They're convinced I wired it right, but it seems I'm getting conflicting info between them and what you said. Pretty disappointing since I've always heard how Crutchfield has the best installation support, etc. I'll do more digging.
@judyjones1987
@judyjones1987 Год назад
Can you use 22-16 butt connects or it have to be 22-18
@salvadorguzman8530
@salvadorguzman8530 4 года назад
Where did you get that t harness I cant find it anywhere or either the audio stores I go to dont know their electronics I look it up online but iam not sure if it's the one
@301Glo
@301Glo 5 лет назад
After an installation, will the factory stereo still display settings related to the AC unit ? such as temperature or where the air is blowing ?
@Warrior_Resisting_Colonialism
@Warrior_Resisting_Colonialism 5 лет назад
Based on what he says "the wire harness kills the speaker wires in the factory radio" and based on the fact that you have a harness that still gets plugged into the factory radio and based on the fact that you need to have the display for those to function,everything about this bypass pigtail harness suggest it does just that; bypasses the radio functions only,retaining all the other hvac circuity.
@jacoby5240
@jacoby5240 5 лет назад
I had the exact same question. I purchased an 07 accord with a CD player installed that LOOKS like this install. Have not seen anything on the original screen and would like HVAC functions
@Warrior_Resisting_Colonialism
@Warrior_Resisting_Colonialism 5 лет назад
@@jacoby5240 I just did the install. Maybe someone didn't install the pigtail? You'll need to take a look. Install one if all they did was bypass the HVAC and feed the new radio. I just installed a radio with the pigtail and I have all the controls working still. I shorted out the constant wire and couldn't find a fuse for it anywhere. I run a devoted fused line right from the battery. It feeds constant power to the original radio and the new one (yellow wire) to turn on the fact radio (now just a clock) and retain radio settings in the new radio.
@irayneksemaj8958
@irayneksemaj8958 2 года назад
Great vid thanks
@tonyv.9248
@tonyv.9248 4 года назад
i just did this exact setup to my 06 accord, did you have a problem reaching your antenna cable to the hole on the radio?
@ProvoBeastAudio
@ProvoBeastAudio 4 года назад
Yep, so we had to pull the radio out to re-route the cable to a better location to reach. See 9:58
@op_cloud8829
@op_cloud8829 2 года назад
Does basically any pioneer radio work or does it have to be a certain one???
@jimmyvargas3999
@jimmyvargas3999 5 лет назад
Do you need the Bluetooth mic cable?
@CHECKENGINESPEEDY
@CHECKENGINESPEEDY 5 лет назад
Good job
Далее
2003-2007 Honda accord radio removal and replacement
15:05
Honda Accord Radio Won't Turn On | Check This First!
3:24
How To Install Rear Speakers On A 03-06 Honda Accord
12:17
HOW TO INSTALL 2003-2007 HONDA ACCORD STEREO
6:26
Просмотров 44 тыс.