2003-2008 Toyota Corolla Headlight Assembly replacement

Подписаться 79 тыс.

Просмотров 147 тыс.

50% 1

2004 Toyota Corolla Headlight Assembly replacement. These headlights was plug and play, the only thing needed was adjusting the passenger side aim down a little.
Thank you AutoSaver88 for sponsoring the product for us to make a video on it.
We did remove the front bumper for easy access to the headlight assembly bolts on the side.
Tools:
amzn.to/2awcRDO 3/8 Ratchet
amzn.to/2b6BebC 3/8 8 mm deep socket
amzn.to/2awd6P5 3/8 10mm socket
amzn.to/2awcdGr Phillip screw driver
amzn.to/2awfUvw Flat head screw driver
amzn.to/2aweq4t needle nose Pliers set
Parts:
amzn.to/2mySFJn
2003-2008 Toyota Corolla headlight assembly
Torque specs:
hand tight
like and share this video!
If you have any questions or concerns, feel free to leave comments on our FB page.
Like us on Facebook
bit.ly/nutzaboutbolts1
and SUBSCRIBE!
bit.ly/NutzAboutBolts2

Авто/Мото

Опубликовано:

20 июл 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@williamwaters4506 4 года назад

I just replaced both light assemblies on a 2007 Corolla, it took about three hours. I was surprised how easy the grill and bumper came off. A bolt that holds on the right headlight broke off and I had to drill it out. It is a special bolt that I had to order from the Toyota dealer. I had a difficult time getting the new light assemblies back in the car and I broke one of the headlight bulbs (no big deal). Your video saved me a lot of money, thanks.

@TPDene 4 года назад

What's different with your 07 model compared to the model in the video? I own the facelift too

@stout_tossme7541 3 года назад

Bro, you are the Bob Ross of headlights. Soft even tones and chill. This was a great guide. Thanks man.

@NutzAboutBolts 2 года назад

Lol thx

@Davidd419 3 года назад

I used this guide to change the headlight assembly on a 2003 Corolla. Thank you.

@NutzAboutBolts 3 года назад

Glad to help

@mikejohnson5900 2 года назад

Thanks for making this easy for the rest of us home mechanics.

@NutzAboutBolts 2 года назад

No problem 👍🏼

@franciszekjurasz5820 3 года назад

Much appreciated. It helped me with 2002 Corolla Hatchback, seems that all of them are made the same.

@wildkatsss 3 года назад

Great video! Made the job very easy. Thank you!

@eia2704 2 года назад

Now that's how you make a do it yourself video!

@maxsedcole81 2 года назад

Great video, very informative, thank you, It helped me with the removal of my head light on a Toyota Allion, A real pain having to take the bumper and grill off thou.

@thorasguardselectrician2013 Год назад

Awesome 👌 just needed to know if I had to remove the bumper. You da man! 👊

@NutzAboutBolts Год назад

Thank you! You don’t have to fully remove the front bumper, you can just pop the top clips and pull the bumper to reveal the headlight bolts to remove it. If you remove the bumper, it’ll be easier to see though.

@RobiSt75 3 года назад

GREAT video! Job done with your help :)

@alaindemers59 5 лет назад

Excellent et très utile. pas de surprise, et facile à remonter! merci, tank you, very usefull !:)

@thebes56 3 года назад

I remember my 62Merc Meteor. Took off three screws, pull head light off, replace, three screws back on.

@vemg 2 года назад

Just did this today what a difference. Thanks for the video.

@NutzAboutBolts 2 года назад

Yes it is. Glad the video helped

@MrAndyStenz 4 года назад

Thanks so much! This was super helpful and covered all the things that a newbie like me needed!

@metalmanipulator7210 3 года назад

Helpful video. Thank you.

@carvin69thinline65 Год назад

You can just about tear any Toyota down to the bare frame with a single 10mm socket.

@kctsp6631 5 лет назад

Good video, thank you.

@SoftwareDevJason 3 года назад

Fyi, if anyone wants to see some additional end results, the amazon reviews have some pics. Just follow link in description.

@jirojosephesman8175 6 лет назад

Great video

@porticoman 4 года назад

That’s great, thanks very much.

@horatiocaine9241 3 года назад

Are all headlight assembly interchangeable between all 03-08 ce, le, and s models?

@YOUandMaine 5 лет назад

Thank you!!!

@aamirgujjar5191 4 года назад

Sir just quick question is the headlight size same for Asian car version if yes then I need a pair for my Corolla in Pakistan . I love the lights design

@andrewbunting6201 4 года назад

Thanks for this. It felt good to achieve it, although took me 5 hours altogether.

@diavolow9 3 года назад

5 hours? why? bro I was thinking of doing this before work tomorrow I thought it would take me like 3 hours tops

@TomReichner 2 года назад

@@diavolow9 when most of the screws and bolts are practically welded together with rust, you can't just unthread them the way the video shows. Removing things that have rusted together is a freaking major project, and I wish that the video maker would have addressed this.

@diavolow9 2 года назад

@@TomReichner I did it in about an hour and half maybie less but I also had help and all the right tools.

@TomReichner 2 года назад

@@diavolow9 you must have a Corolla that is in fairly sound condition. If, like me, your Corolla has been beat to hell off road, and banged into a lot of stuff, and the body has been wracked this way and crunched that way, and you've never bothered to repair any of the damage, then nothing lines up properly, and getting the screws out and getting everything back together again is a real nightmare.

@diavolow9 2 года назад

@@TomReichner o yes that was probably it I bought it last year for my son it had 100,000 miles and the lady was the only owner and I got it for 3200. it has 126,000 now and had not put nothing Into it but regular maitnance.

@NightSociety 4 года назад

Do the new ones fog/cloudy after a while?

@chummierbell7724 5 лет назад

How did you get that 05-08 grille to fit on the 04?

@jeffspacek4391 Год назад

Thank you!

@keepersoftheflame7074 4 года назад

How long did it take you to replace both of them?

@suntzuwarsword1964 2 года назад

Thank you

@DdgeShelby Год назад

I'm getting Bob Ross vibes, thanks man!

@dominic7915 3 года назад

Very help thank u and go kolbalt my brothers are techs and they use the kobalt line of 3/8 and 1/2 impact that say it’s funny thier snap on people at work are always asking them to use thier kobalt impacts

@anonemoose6622 3 месяца назад

You don't have to take the grill off. Just unbolt it and it comes off with the bumper as a whole piece.

@raymondperez3553 5 лет назад

Did you reattach the side clip to the headlight , I was waiting to see how you put it back on?

@a.m.v.6938 5 лет назад

Raymond perez you just snap it back in by pushing it back in hole.

@williamwaters4506 4 года назад

He must have because without that clip you cannot screw in the lower head light bracket.

@henrybikeman 2 года назад

The "clip" is called a captive nut, or a speednut.

@guyfawkes62 2 года назад

thanks for the video. how much trouble was it to adjust the beams on the side where the battery is? Noticed you switched to the other side at the end of the video.

@NutzAboutBolts 2 года назад

Wasn’t bad, the adjustment screws were right there.

@guyfawkes62 2 года назад

@@NutzAboutBolts cool

@kyonngowans7091 Год назад

Were you able to but the bumper back on with just one person or did you need someone to hold it for you while you tightened the bolts?

@NutzAboutBolts Год назад

You can put it back on with one person. You can have it snap back into place and then have it screwed on.

@juliodg2139 Год назад

good video, the headlight looks good, you recommend them, some aftermarket get water, thanks

@albertsperanza9794 5 лет назад

Great video. Do you have a video on putting the bumper back on?

@NutzAboutBolts 5 лет назад

No sorry, we might have to do one since we don’t have a video on it lol

@mfpp69 4 года назад

Just play the video backwards!

@JL-pr8ik 6 лет назад

Great vid, keep up the good work. BTW where'd you order the headlight piece from?

@NutzAboutBolts 6 лет назад

I put a link in the description box for the headlight assembly. :)

@futbolislife672 2 года назад

What’s the timeframe for this job to be done? I want to do this before sunset leaving me with 1.5 to 2 hours. Is that enough?

@NutzAboutBolts 2 года назад

Yes that should be enough time

@Jiggaboo922 3 года назад

Hi there can you tell me all the tools I’d need, it would make it easier if I had a list.

@NutzAboutBolts 3 года назад

It’s in the description box

@aqeelrazaofficial 5 лет назад

Where you from

@syedmohsinali7264 3 года назад

how much it cost u nd country of origin

@wmd40 4 года назад

The screw that holds the bumper and grill... Mine is completely rusted. My stupid friend stripped it. But we can't get at it because of the plastic grommet thing. Does the plastic part come off by itself? Or will pulling on it also rip the screw out?

@Davidd419 3 года назад

You can pull off the rub part carefully with a little force and use a vice grip on the screw. I had the same problem but the screw stripped because of the rust.

@TomReichner 2 года назад

The screw(s) that you take out so easily at 1:24 do not come out anywhere near as easily in real life situations with very old Corollas. Mine are pretty much "welded" in place with rust, and will have to be drilled out, and then a new nut welded onto the sheet metal on the bottom. A really big freaking deal to do. I think only people with Corollas in newer condition, like under 200,000 miles, will be able to take those screws out the way you do.

@daboiikev6955 2 года назад

Mine came out like butter 260k still countin

@TomReichner 2 года назад

@@daboiikev6955 that's great to know. I should buy new screws to replace my old ones because the rust on them is so heavy they were practically welded to the female threads

@nareshkumarsen4892 4 года назад

Palace Rs

@mannyflores9161 11 месяцев назад

Damm you have to remove all that just for the headlight ????

@ibewill 6 месяцев назад

Beautifully engineered cars but simple stuff like this is rough for example with replacing fuses where you'd have to remove the driver seat

@harpomarx7777 4 года назад

.. and then the bumper cover just magically goes back on. No need to show you folks that.

@syedmohsinali7264 3 года назад

plzzz

@briansmith6862 3 года назад

... or you could have saved yourself a ton of money by taking the headlights out as you did, sanding the lenses and spraying them with a couple of coats of clear coat. Total cost : one can of clear coat.