It was coughing out the carb so I decided to check and clean the carb.
It's not the first time I do this and everything seems fine on the carb.
When I installed it, then it wouldn't idle at all without throttle.
I tested the intake seals with carb spay and it had a leak at the rear cylinder.
I replaced with new oem gaskets and that seems to be corrected because when I spray carb cleaner at the same spots it doesn't die out any more like before.
I don't have the little collar that goes in the hole at the plastic carb cap where the cable linkage attaches... although I don't think that's the problem.
I have placed a washer there on top of the cap before the linkage for now.
On the carb: I tried a different slide.The needle Jet is well placed with the longer side protruding inside the carb cylinder.
Can the issue be due to the smoke from the rear cylinder?
Any ideas?
9 июл 2024