2005 G35 door lock actuator replacement 

Of course glad I could help!!!

Holy shit is it really gonna be that much ?

Of course, glad I could help!

Thank you I’m trying🥲

We’re you able to?

If it’s not unlocking and or locking with any button used to lock or unlock but the other doors do it is possible that the actuator went out or that there may be a fuse that burnt out I would first make sure it is the actuator

@@nationaloutlaws4818 No, it doesn’t work with any buttons from the remote or the buttons by the window buttons. And all the other doors work like it’s supposed to. So there’s a separate fuse for each individual door? And where would that fuse be located in, if you know? Thanks in advance.

I don’t think there’s a fuse for each individual I could be wrong I’m not that sure but if all others are working then maybe it is your lock actuator and if the window isn’t moving that could be the window motor the switches or a fuse

@@nationaloutlaws4818 Oh ok. All four windows are working just fine. I have heard that on Nissans and Infinitis once the lock actuator goes out, sooner or later the window stops working too. Idk how true is that, I’m new to this brand. And also I wanted to make sure if this lock actuator would work on my 2012 G37 rear door? Cause I want a cheap fix.

That’s also what I’ve heard but I’ve done this fix over a year ago and it’s hold up strong as well as my window motor, and if all windows work more than likely it is the actuator and yes it’ll work you just have to diy it to get the oem latch working with it

Haven’t let me down !!!

You should be able to diy it on so it can work, I actually diyed mine on my car also!

You repaired them in your fx35 04?

Which wire in specific, the ones that connect to the new actuator for its power or the one that moves back and forth?

Heyyy, actually, they are awesome, strong as day one hasn’t had any problems and it’s been 9 months since I installed them

@@nationaloutlaws4818 Thats great bro good to hear, gonna order them then, my passenger door on my 03 coupe recently went out so gonna give this a go, appreciate it bro! 🙏🏼

Sounds awesome I’m glad I could help

Heyyy, soooo you have to make sure the wire is getting pressure if it has slack in it it’s not gonna work or it’ll work here and there but not 100% like you’d like, I suggest going back thru and making sure the oem cable is tight also there is a clear film over the oem wire you have to remove or else it work either it has to be metal or it’s not gonna work

Actually, try the lock switch on your doors if that doesn’t work, then I am going to assume it’s either a fuse under the hood there’s 2 hidden fuse box’s ones easy to find the other you have to take a part a few things but it’s not hard, also if the fob isn’t making the lights on the outside flash when you lock or unlock the car then try reprogramming it, there’s some videos on RU-vid showing how to do so, and if there isn’t a fuse that’s burnt it’s probably the actuators since the actuator motors run both windows and locks , so once the locks start going out soon after the window motor will give out as well, and they are on the same bracket

Make sure the cables are put on correctly, once I didn’t install it correctly and it would unlock but not lock since it wasn’t on properly, if that’s not it, at the very end of the wires there’s like this plastic part that should be a guide where to put your cable to, try pulling it further so it get pressure and then put it on while maintaining that pressure

@@nationaloutlaws4818 man thank you for the reply and the video finally got my doors locking & unlocking!! Had to zip tie the two cables together so it could pull the lock open/closed & adjust the rod. Prob took each door panel off & on 100 times lol. 👍🏼

Lol the important thing is that they are working now, I’m glad they are and I was of help!

Hehe so u be watching g vids tooo

@@jasonraahauge9343 haha I wanted to see other people trying out the method I showed 😄

I bought more wire to complete the task, you can buy more wire at a local Walmart that’s what I did in the car section

Yes, I mean technically you are bypassing everything and putting your own actuator so yes it should

Wym

Of course!