Тёмный
No video :(

2006 kfx 400 start up update 

FantasyCustoms4Life
Подписаться 6 тыс.
Просмотров 25 тыс.
50% 1

www.Fantasy-Cus...
client brought me this 2006 kawasaki kfx 400 in a no start
condition. after some diagnostics it came down to cylinder head work on the valves and a carb tune. after those is when this video was recorded it starts right up.

Опубликовано:

 

19 июн 2011

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 90   
@samuelkudroc6793
@samuelkudroc6793 2 года назад
@FantasyCustoms4life how you fix that?
@FantasyCustoms4Life
@FantasyCustoms4Life 2 года назад
This quad got valves lashed and that was the majority of what it needed to run again. Had low compression. Thanks for the comment.
@FantasyCustoms4Life
@FantasyCustoms4Life 13 лет назад
@juice: Are you talking about the quad in this video? If so, trust me buddy. It was fouling out plugs right and left so I'm 100% positive it was running rich during this video. The jets were stock yes, but it was shooting flames out the pipe. I then adjusted the pilot screw and it stopped fouling plugs and had a nice plug reading with no more backfire. Someone had tried to fix this quad before me the owner said. The timing wasnt even set right when I took the head apart.
@susdad
@susdad 4 года назад
He didn’t want you to ride his bike. No seat no bike...this is 8 years old anyways
@keithparady2594
@keithparady2594 4 года назад
Alright thanks again I appreciate it
@garycochran7383
@garycochran7383 8 лет назад
ok thank you
@calebroberts8796
@calebroberts8796 8 лет назад
did you have trouble getting the tank back on? I can't get the holes in the tank to line up with the frame holes.
@FantasyCustoms4Life
@FantasyCustoms4Life 8 лет назад
Doesnt seem like i had too much trouble with that, no. maybe your quad was wrecked or? who knows. use your muscles or a ratchet strap to get it where it needs to be to get the bolts screwed in.
@tcoop1919
@tcoop1919 13 лет назад
i have the same quad and last time i was out it was giving me some problems. it would start but as soon as i would give it any gas it would die right away. we think there is something in the carb but we don't know for sure. if you have any ideas it would be appreciated.
@keithparady2594
@keithparady2594 4 года назад
Is there some kind of trick to get the bike started
@FantasyCustoms4Life
@FantasyCustoms4Life 13 лет назад
could be a number of things, pull the spark plug and see what color the tip of it is and let me know. otherwise see if it runs better with the choke on and let me know, maybe I can help you figure it out if you give me more information.
@taygaming8039
@taygaming8039 3 года назад
Is there anyway I can contact you? I need your help
@FantasyCustoms4Life
@FantasyCustoms4Life 3 года назад
Fantasycustoms4life@gmail.com
@christophergarcia4736
@christophergarcia4736 7 лет назад
hey bro i wanted to know if you only switched the valve or you swithced the valves springs etc
@FantasyCustoms4Life
@FantasyCustoms4Life 7 лет назад
Just valves springs measured out to still be in service manual spec.
@juice42066
@juice42066 13 лет назад
Needs to be re jetted still. I don't think it's running rich if all that's done is the pipe. It's probably on the lean side. Plug chop and re jet accordingly. Probably a 150 main and maybe a 45 pilot.
@andrewmeriwether75
@andrewmeriwether75 8 лет назад
Need help with my 2004 LTZ 400... Brand new stator, spark plug, and coil... no spark and no fuel getting to the cylinder. Thinking a possible bad cdi box?
@FantasyCustoms4Life
@FantasyCustoms4Life 8 лет назад
+Andrew Meriwether pickup coil? pickup coil gap? you can check for a pulse reading from the pickup coil wires. bad ground? is cdi getting voltage? could be a bad cdi maybe but hard to say.
@andrewmeriwether75
@andrewmeriwether75 8 лет назад
replaced cdi box... no luck
@salciminelli9403
@salciminelli9403 6 лет назад
Andrew Meriwether It would’ve been the wires near the CDI box are famous for breaking in Rippon off
@keithparady2594
@keithparady2594 4 года назад
I just picked up a 05 kfx 400 and I’m trying to get it running the manual doesn’t get to specific about things when I turn the engine to tdc the cam sprockets are in different positions so how do I get it timed right
@FantasyCustoms4Life
@FantasyCustoms4Life 4 года назад
@ronald Parady - Loosen the cam chain tensioner and loosen the cam caps and line them up right. torque cam caps then get your tensioner back in and tight then spin it over a couple times by hand on the crank bolt and check timing marks again. Good luck Ronald and Cheers!
@keithparady2594
@keithparady2594 4 года назад
Since u replied back and what if a guy got the engine in a box and just got it put back together and in the atv and hasn’t worked on something this new and didn’t know about the valve shims I got two that are 3.14 and two that are 2.82 an 2.53 I can figure it out thanks fo replying
@FantasyCustoms4Life
@FantasyCustoms4Life 4 года назад
@Ronald Parady - The shims you will just have to guess the first time and measure the valve lash on all them after you install your cams to find if there is some too tight and measure the others to find where the lash is too loose and you will be able to switch the shims around accordingly after you figure out where your lash is at on all of them. If the lash is overly small or tight the valve will stick open and lose your compression. Overly loose lash and they wont open the valve as much or as long and could make noise. Hope this helps you a little. Thanks
@cub107luke3
@cub107luke3 7 лет назад
are the head bolts on it dont look like it
@FantasyCustoms4Life
@FantasyCustoms4Life 7 лет назад
seem to remember the smaller side bolts were stripped out, the big head bolts are inside the valve cover.
@anthonypagano1739
@anthonypagano1739 9 лет назад
I need that tank
@oscaroneal8148
@oscaroneal8148 7 лет назад
Do you have a way I can text u and ask question bc I have one that need a little work
@FantasyCustoms4Life
@FantasyCustoms4Life 7 лет назад
Fantasy-customs.com My contact info is on my website.
@garycochran7383
@garycochran7383 8 лет назад
hey man have a kfx 400 it kills the plugs left n right and it's hard to start with the electric start but u can push start it runs fine clean carb n jets ran fine when I got it then started back firing n killing the plug checked everything on it over n over
@FantasyCustoms4Life
@FantasyCustoms4Life 8 лет назад
Sounds like you may have low compression. Do a compression test and if its lower than 100 psi then do a leakdown test to see where your compression loss is.
@david-ji7mj
@david-ji7mj 8 лет назад
I have a 2003 ltz 400 I start it it runs perfect for 10- 20 mins then the idle slows down tile it just dies. if I give gas when I do you it bogs down and dies. I had a stuck choke cable and got it working freely and cleaned the carb. doe anyone have any clue to why it would die 10-20 min of running pitcocks ben updated vacuum blocked on carb. I know my old quad when it ran out of gas it would idle up and die so I'm sure its getting gas. I'm at a loss right now could this be the cdi box or flooding issue is there a way to test cdi?
@FantasyCustoms4Life
@FantasyCustoms4Life 8 лет назад
does it start right back up after it dies?
@david-ji7mj
@david-ji7mj 8 лет назад
After it cools back down a little it does. I'm starting to think that it floods out the motor as it running and the gas kills the motor. I'm new to this stuff I have two videos posted of it running before I messed with carb. And it would not die then I though fixing the jammed up choke and cleaning carb would help but after runs for 10 maybe 20 mins idles down dies I know if it was losing fuel it would idle up and die.
@FantasyCustoms4Life
@FantasyCustoms4Life 8 лет назад
yeah if you messed with the carb and now its doing something strange that could be something you messed with. when it dies if you flip the choke and it suddenly doesnt die that could point to running out of gas somehow. otherwise if it helps it die then you could be on to something with it flooding out. also if its getting hot for some reason then it very well could have some problem with overheating whatever reason it overheats for and thats your problem. sorry I cant be of more help hard to diagnose things over text sometimes.
@david-ji7mj
@david-ji7mj 8 лет назад
was the floats it was flooding the engine now it idles with out dieing. I do need to adjust air screw but not much hardest part is finding one to fit. I bought it from a kid and just getting it straightened out.
@david-ji7mj
@david-ji7mj 8 лет назад
+david hard part finding a screw driver that will fit
@haroldcorrea2402
@haroldcorrea2402 6 лет назад
I have a question. I have 2003 kfx 400 and after changing valves and piston rings still won't start I have no pressure on the test what can I do to fix this problem
@FantasyCustoms4Life
@FantasyCustoms4Life 6 лет назад
Did you check your valve lash on the newly installed valves? The best way to quickly see where you are loosing your compression is by doing a leak down test. Thanks and good luck.
@haroldcorrea2402
@haroldcorrea2402 6 лет назад
The issue now is that the compression is going to the intake not the exhaust is that timing? I put the timings how the manual instructions
@FantasyCustoms4Life
@FantasyCustoms4Life 6 лет назад
valves or valve seats
@chrisdavis8878
@chrisdavis8878 9 лет назад
I need help with my kfx Man can you help me out
@FantasyCustoms4Life
@FantasyCustoms4Life 9 лет назад
CHRIS DAVIS I will try to help subscribes the best I can.
@keithparady2594
@keithparady2594 4 года назад
So u sound like you know what ur talking about do u mind if ask u a couple questions
@FantasyCustoms4Life
@FantasyCustoms4Life 4 года назад
Yes, I can try my best to answer.
@keithparady2594
@keithparady2594 4 года назад
FantasyCustoms4Life I cannot for the life of me get it started I got spark got gas compression can’t figure out the compression stroke to set the timing
@FantasyCustoms4Life
@FantasyCustoms4Life 4 года назад
So you have compression? What’s your compression read? The timing mark on the flywheel will be tdc on the piston. Once you have that check your cam sprockets for their timing marks or reset if they are off.
@keithparady2594
@keithparady2594 4 года назад
FantasyCustoms4Life does the clutch have to be pulled in
@keithparady2594
@keithparady2594 4 года назад
FantasyCustoms4Life there’s a lever or parking break broke off next to the clutch
@david-ji7mj
@david-ji7mj 8 лет назад
if I choke it. it hits but i also have to barley touch throttle to help it along it seems. if I don't touch gas it back fires with choke on. I then switch choke off and It hits and boom back fires switch back to choke and hit hit hit starts with choke on a but you switch choke off it idles kinda low but turn choke back on it will die. sometime it will start with choke off after trying it on then off. maybe to much air they made the lid on the air box and it has a hmf slip on. pretty sure main jet was either 135 or 140 pilot was 23 I believe. they are stock ones I'm almost sure. I just hope it's not the vavles.
@joepirri9694
@joepirri9694 8 лет назад
Hello I bought 2005 K FX 400 for my son , making noise like when you Need starter I replace the starter and starter Clutch and still makes the same noise from before can you please help me out thank you so much
@FantasyCustoms4Life
@FantasyCustoms4Life 8 лет назад
+Joe Pirri is there anyway you can send me a video of whats going on? weak battery? the battery cables not tight or corroded?
@joepirri9694
@joepirri9694 8 лет назад
ty
Далее
KFX 400 New Carb Install
15:52
Просмотров 19 тыс.
TIMING SUZUKI LTZ AND CHECKING VALVE CLEARANCE
16:21
Просмотров 35 тыс.
Surxondaryoga biz chempionlarimiz bilan yetib keldik!
00:55
KFX400 won't start
3:40
Просмотров 4,4 тыс.
Backfiring? Sputtering? Rough idle? Stalling?
2:24
Просмотров 126 тыс.
2007 Honda TRX400EX Top End Replacement Ep60
37:44
Просмотров 1,4 тыс.
KFX400/LTZ400/DVX400 CARBURETOR REMOVAL/CLEAN *PART 1*
26:19
I Finally Bought It...Suzuki LTZ400 Quad
36:34
Просмотров 116 тыс.
2003 Kawasaki KFX400 Carburetor Cleaning
18:14
Просмотров 115 тыс.