No video :(

2007-2018 Jeep Wrangler JK Install: Mishimoto Aluminum Radiator

Подписаться 76 тыс.

Просмотров 53 тыс.

50% 1

Matt shows you how to install a Mishimoto Aluminum Radiator on your 2007-2018 Jeep JK Wrangler.
Purchase Product Here:
Mishimoto Radiator:
www.cjponypart...
Mishimoto Radiator Hoses:
www.cjponypart...
Keeping engine cool on your rig is important whether your on or off the trails, and one of the best ways to turn down the heat is with this Mishimoto radiator.
Providing a whopping sixty-percent improvement over the thickness of its core when compared to stock, this upgrade offers way more cooling properties.
Giving your JK a more efficient and safe system, raising the boiling point of engine coolant with its 1.3 bar high-pressure radiator cap. Also included with this radiator is a magnetic drain plug that will capture metallic debris that finds its way into your cooling system.
Installation is easy and can be finished within five-hours with nothing more than a few simple hand tools. Before you know it, you'll be back on or off-road in no time with your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler.
Check out more Wrangler Radiators & Hoses parts from CJ's here:
www.cjponypart...
Check out more Mishimoto parts from CJ's here:
www.cjponypart...
Subscribe to CJ Off-Road on RU-vid here:
/ cjoffroad
Follow CJ Off-Road on Instagram here:
/ cjoffroad
Music Provided By:
www.epidemicsou...

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@TactiDaddy 5 лет назад

Honestly it would have been a 5-star video if you ended off with the before and after difference of temperatures and what kind of coolant you used to replace it with.

@brijdelada3435 5 лет назад

It just the jeep recommended coolant, I went to a dealer and they gave me the correct coolant at an affordable price. It was a few extra dollars but having Mopar/Jeep brand coolant and fluids is what I always do to make sure everything works correctly.

@kenrodriguez9645 2 года назад

The before-after temps are going to range so widely depending on so many factors, the engine works harder for driving 33"s, 35"s, 37", 40"s, then it works less for 4.10s, 456's, 488's 513's, then more air gets to it depending on grill, OEM Grill, Angry Bird Grill, and more or less air gets to it if you have grill inserts with US flags and stuff on them, or if you have lights mounted in front of your grill, and lastly, if you have a winch it'll restrict airflow, or if you have it sunken, it'll improve airflow (or if you have no winch at all, that's ideal), as well as if you have a stinger or bull bar, that'll also restrict flow, PLUS and probably most importantly, ambient air temperature where you live. It's totally possible, if you have a great airflow, no winch, no bullbar, a free and clear grill with no slots or obstructions, that the aftermarket radiator has no degree improvement over the stock under normal driving conditions, but then change any of those variables (do a hill climb in 4 low with 40"s on 4.10 gears) then maybe the OEM will heat soak faster than the aftermarket. Too many factors for an apples to apples comparison.

@MotoSurgeon 3 года назад

Pro tip: enlarge the holes of the ac condenser and manifold mounting holes that connect to the new radiator. Fitment is not going to be perfect so bending some tabs together with enlarging some holes will make using all fasterners less of a headache

@pnwoverland253 Год назад

Wish I had seen this sooner. Condenser and mounts on radiator do not line up on one side

@josephmartin2362 Месяц назад

@@pnwoverland253 Measure the AC line bracket mount -- it should only be 3/4" tall. The one I received had a 1" tall mount (cut it down and all is good).

@tylerm97 5 лет назад

Thanks this was a great well executed video. I have a faint smell of antifreeze on my 2016 No drips and it doesn’t run hot but makes me nervous. So brought it to the dealership they wanted nearly $1200 for OEM which only lasted 2.5 years! I’m completely capable of handling what I just saw in this video so for a few hours and around $300 in parts. I’ll be doing this myself now. Thanks again!

@irishsetter48 5 лет назад

Thank you for listing the tools, narrating and identifying the tool you're using for each operation, and talking me through the removal. Excellent video. Thank you for making it.

@mjones3596 2 года назад

Whoever reads this they forgot to tell you a few things. Take the old rubber mounts off the factory radiator and install them on your new radiator aftermarket or not. Also the condenser holes won’t line up you will have to make them bigger to mount the condenser to the radiator, you will be able to mount one side but not both, Yes I bought and installed one of these radiators myself. I hope this helps you. I also changed the the heater core the easy way and put a fail safe thermostat in along with a new water pump. Your right there you might as well change it. Now I have heat heat in my Jeep !

@josephmartin2362 Месяц назад

Check the height of the side AC line bracket mount -- it should be 3/4" tall, not 1" like mine was. Shorten to 3/4" and all holes line up correctly.

@Spacesprocketz 5 лет назад

My radiator just cracked on my JK I just found a Mishimoto as an open box, I figured i minus well go with it. Thanks for the video

@jeffreyvillaloboz6422 5 лет назад

It definitely doesn’t take 5 hours. Roughly around an hour to take it off and one to install. 20mins to add coolant and circulate the air bubbles from the heater core.

@marcosierra2510 3 года назад

Great information. Listing the tools 🧰 extremely useful. Well explained. Thank you.

@jacobfoulds7618 Год назад

There is five pushpins on the bottom shroud

@eriknash8783 Год назад

This version does not have a trans cooler, must be a manual gearbox. Trans cooler adds another level of complexity

@bartwaggoner2000 6 лет назад

Why not swap out water pump while in there? Also, how much difference in cooling does it make, and do you need new thermostat? Nice video!

@JWard2 3 года назад

@@stevenp3176 where are the vents?

@ADCC-qp2gk Год назад

@@JWard2 additional vents on the JL on front fenders for the engine heat to leave while driving on the sides.

@JWard2 Год назад

@@ADCC-qp2gk o right on. Thank you

@ADCC-qp2gk Год назад

@@JWard2 I owned a JL for 4 and half years and I did notice that gas mileage is way better than the jk I now own I'm doing anything I can to help with gas now lol the JK also are heavier than the JL also so Chrysler did alot of modifications to improve the wrangler from Jk to JL.Doors got liter on the JL from the JK,the body weight of the JK was heavier than the JL also.

@eloser Год назад

@@ADCC-qp2gkthat’s not true, there to reduce hood flutter

@brijdelada3435 5 лет назад

Amazing video! Definitly will be adding this to the stormshadow build! Is the front one a transmission cooler? You need to do an install video on that, I think Mishimoto makes one!

@jimlayhey1965 6 месяцев назад

take that grill off would help more for cooling

@kunney1 4 года назад

i have had mine in for about 20,000 miles and it leaks i put in the silicon hoses and the antifreezes from mishimoto not happy 2016 jku

@thomasdolan5738 2 года назад

You haven’t lived until you’ve done a radiator swap with the trans cooler and a power steering cool up front there as well. Certainly adds a degree of difficulty

@brandonclifton2027 Год назад

Any tips, as I have both and am planning to do so?

@ignaciomusic4u 5 месяцев назад

Thanks for the video, but why are you mispronouncing "radiator"?

@vgullotta 5 лет назад

do you HAVE to remove the air box? I have a snorkel connected to mine.

@sherifx5122 2 года назад

People are having better luck with this brand and others by not fully bolting it down. Use a little loctight on the bolts with the radiator able to wiggle around slightly. When you flex the jeep it doesn't twist the radiator during the flex.

@williamlee7782 Год назад

What's that big heatsink looking thing atop the fuss box in the engine bay?

@MdGuardian1032 3 года назад

Nice install. Glad you like the "angry" grill. Me, nah.

@ds6491 2 года назад

It’s missing threaded hole on the right bottom corner comparing to OEM. There are 2 metal lines that left lose after installing. If they rub you’d develop the hole very quick. Idk why such an expensive radiator left this out. Disappointing

@brandonburson481 6 лет назад

What are the temperatures different between the stock radiator and the aluminum one? Would have been a better video I wdont know if I'll buy one tell I see the gains from the temperatures different.

@mycatsaliberal3848 5 лет назад

Not much

@sherifx5122 2 года назад

Was average of 222 to 230. Towing and pulling a hill 240 to 250 limp with inside heater on high. Now 205 average and 230 to 243 towing up hill without running heater. This is with their 180° thermostat installed.

@TriDaddy 5 лет назад

read reviews on quadratec.. Doesn't look like other had luck with this radiator

@brijdelada3435 5 лет назад

looks badass though! hahahaha, any other recommendations?

@marcberard7382 5 лет назад

How do I buy one for my 3.6 auto auto in Australia?

@brcc8208 6 лет назад

Did you state that the silicone hoses are available for the new JL as well? Thank you! Great video!

@RobertKohut 6 лет назад

Cool!!

@SteveKing84 2 года назад

Whats the device on top your fuse box?

@jamescole6846 Год назад

I saw that too and after much digging ... it is a Trigger 6 Shooter Wireless Accessory Control System or in more simple terms. A wireless remote aux fuse/relay box. why you want that is beyond me.

@xianpingcao 3 года назад

Did you install 2 radiator shrouds?

@jeffshultz3883 5 месяцев назад

I saw that too! Mine got tore taking the radiator out so they hit the trash can. There's been no I'll affect of them not being there so send them if ya want to save yourself a lot of swearing😮

@717Lucero 6 лет назад

There’s your problem lady that 3.8 liter is a boat anchor.

@amgelus 5 лет назад

The worst radiator ever, I'm on my 5th radiator cause they after 6 to 8 months, now I know why their warranty is lifetime. SMH

@johnhines541 5 лет назад

Are the jk factory radiator warranty lifetime or the aftermarket radiator?

@jmbugno 4 года назад

Which radiator are you referring to as the worst? The OEM or the "M" radiator in this video?

@jcull 5 лет назад

Are there any reviews on their 2nd gen ?Their first gen had a lot of bad reviews .

@S2K_Crosstrek 5 лет назад

jason cullen I just installed the Version 2, was hesitant because all of the bad reviews from Version 1 leaking after only a few months. I called Mishimoto and talked to them about what they did to the updated version and I guess will have to wait and see. Only had it on for a couple of days also flushed the entire system because last owner had put wrong coolant in. I checked the history on my Jeep (2015 Rubi JKU) and it is on its 2nd mopar radiator at 50K and I could smell strong coolant odor at top right drivers side after driving. After pulled off, didn’t see any visible powder from dried coolant but also didn’t pressure test either. If the Mishi V2 goes bad, will probably go back to Mopar or Griffin model since they obviously didn’t get it right. We will see.

@hernandosalazar398 5 лет назад

Seth Hall Im wanting to get the V2 but I’m a bit hesitant too. Especially for the price

@JWard2 3 года назад

@@S2K_Crosstrek how are things a year later?

@S2K_Crosstrek 3 года назад

@@JWard2 no problems yet, no leaks and cooling has remained the same. I have only put a couple of thousand miles on it l. Jeep is stored in the winter.

@mikeholbert1686 2 года назад

@@S2K_Crosstrek any problems since or still running strong.

@project-5724 4 года назад

Jeezus - don't do this mode. I did it about 3 or 4 years ago. The radiator is weaker than stock. I went through 3 of them in about 2 months. Contacted the company and they think it's the frame of the JK causing the radiator to fail. (i'm just doing street driving). It cost my a fortune in antifreeze having to fill up after each replacement and all my time!!! Thank GOD I did not pay someone do do this!!! it would have been a fortune times 10! Anyway - went back to stock and haven't had any issues.

@eriknash8783 Год назад

You skip all the struggle and bullshit of getting the old radiator out and separated from the condenser and lines that are snapped into the side.