2007 Mazdaspeed3 evap leak FIX! (code p0442, p0455) 

Man you are the best! I have an 07 Mazda 3, spent hours watching vids on the P0442 code that I have. Also my garage reeks of gasoline after I fill the tank. I already replaced the gas cap and tested the purge valve (tube in water, jumper wire to the valve etc, valve is fine). After watching your video tonight guess what.... I removed my back seat and.. crack in the EXACT direction and area as yours!! Identical crack! As I ran my finger along it. Like you said in another comment evap can be very tricky. I am SO GLAD I found a problem area thanks to your video, even if if doesn’t solve it which is possible given one of your recent comments. I will definitely be changing this seal out soon. Thanks again, goal accomplished thanks to you posting this 🙏

Nice job bro! I really like how you show every step of the job.

Nice, saved me alot of time diagnosing this stuff!!! 🤙 Kept having same code pop up. And when I filled up take I'd get a slight smell of fuel

Good video, sweet whip! Mines a 2nd gen MS3

FYI There is a recall on this part for the 2006-2007 Mazdaspeed6 and 2009-2011 RX-8. The part number, at least for the RX-8 is the same as the part for the Mazdaspeed3. STATEMENT ON SAFETY RECALL 5121I OF CERTAIN MAZDA RX-8 AND MAZDASPEED6 VEHICLES FUEL MAY LEAK FROM FUEL PUMP MOUNTING RINGS

hey bro thanks for the video! did you have any symptoms due to the evap leak? and did you use a smoke machine to find the cracked seal?

Did you have to disconnect the fuel filler neck from the gas door or anything like that to lower it? Is there enough slack or flex in the filler neck that you can leave that all alone?

In my 2012 Mazdaspeed 3, the plastic nipple at the top of the housing that connects to the hose cracked, so I had to drop the whole tank and replace the top of the housing with one from a salvage 2013 Mazda 3. It was a pain in the ass for such a small malfunction 😤😤

Thank you bro and any help on an intake manifold or catalytic converter code?

appreciate the video !!!

What symptoms were you having when you had this code?

Hey bro when like leaning over the tank like that did you unplug any of the filer neck hoses because for me I took of the 12 mm and the gas lines in front and the tank didn’t want to drop do you know what else is like holding it intact ?

I'm only getting code p0455. Should i change my Purge valve

I noticed that you said it started right up. Did it used to not start up as quick before you changed the ring ?

What exhaust is that?? I like the fart cannons lol

I need that 3d print stl file ya heeaaarddd

Looks like you have room to replacing it from the inside of the car once that cover plate is off. I need to do this, fuel started pouring from the top today

Did you have bad gas mileage with the codes

Part number ?

Do you have a part number ?

Part number? Part name?