Turn vehicle to ON position Make sure its on trip A Turn key to off position Hold reset button while turning key to ON position.. it will start blinking.. keep holding. You're done. Also, 0w-20 is correct oil for this vehicle.
For anyone struggling to remove the Oil filter housing buy a good filter wrench. I had bought a cheap one from the auto store and struggled for 3 hours trying to remove the housing. Tried an impact wrench even. The problem was the filter wrench wasn't gripping good enough. I even tried the paper trick. I ended up buying a MotivX tools filter wrench and it came off in under a minute.
0w20 is designed for fuel efficency and emission controls. If you want to actually save your engine from wearing out and if you are not living in far north, 5w30 is better choice. But if you are selling your car after its 5 y.o. you may use 0w20.
@@falahaljaf7452 They do not care about your engine health after your guarantee runs out. If you plan to drive your car longer than 300.000 km you should consider using 5w30. Many Turkish Toyota services are using 5w30 and there are many toyota's around 700.000 km without any repair to the engine.
Why that's really simple to do for half the cost of having it changed by a technician not to mention you pick and are witness to some good brand oil being put in your engine and not some low grade common oil prob half blend instead of being fully synthetic lol 😂
Corolla oil changes are super fast and easy. You just need the special oil filer wrench. The quick lube shops have a tendency of over tightening and damaging the oil filter housing so I wouldn’t trust them.
Yes it calls for 0-20 weight but some people like to do 5-30 because of how high the mileage is depending on I mean if it's getting close to 200 thousand miles 530 weight is fine because engine wear
Okay I understand I just keep using what is recommended for the car buy Toyota I have 190000 on a 2010 I use mobile 1 again great video thanks for sharing ☮️
The filter is like really stuck in there I’m guessing the mechanic did it on purpose u know any alternative to taking it out? Plz answer I got work in 20 hours
If you have the tool for the filter housing use a longer ratchet. It will give you more leverage. You can try tapping the ratchet with your hand or a hammer. Good luck!!
@@duquesautomotive6161 okay there’s an autozone nearby but I’ll wait till they open and buy a longer ratchet I think I may buy a filter housing just in case I brake it. Man I hate cars good thing we have citizens like you passing on your wisdom to stupid kids like me.
@@duquesautomotive6161 yeah when my dad and I were trying to get it out some of the ridges were getting torn I think imma fill it back up with new oil wait till the new filter housing arrives then take it to a mech to use his special tools to remove it. Sucks but whatever wish me luck and have a good weekend!! 🇺🇸
You can find them on Amazon or go to your local Toyota dealer. Make sure to let them know what type of car you have because Toyota has 2 sizes for their filter wrenches.
Why do you use high mileage oil? Does your engine burn or leak oil? High mileage oil... When/why to use ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pPFSR-2lhxY.html
