2009 Toyota Yaris serpentine belt tip - just undo this bolt!

Подписаться 3,4 тыс.

Просмотров 24 тыс.

50% 1

Undo the pivot bolt and you can then move the alternator towards the firewall to give you some slack in the belt. Installation of the belt is fairly straight forward but let me know if you have any questions.
Not sure how I'm going to get that rounded bolt off the bottom of the alternator when it comes time for a replacement and I'm open to any suggestion that you have.
#toyotayaris #serpentinebelt

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@ahmedm6041 13 дней назад

100% accurate because I followed that too and it screwed me up big time! My advice to people listen to this guy and give him thumbs up👍and don't follow the other guy's video. Thank you for sharing!

@edramos1515 3 месяца назад

Just done a belt replacement today 5.6.2024. Thanks for the tip, it's very helpful.

@thecarchak 3 месяца назад

My pleasure

@Brandoowrld Год назад

Thank you I’m literally about to do this now

@thecarchak Год назад

get it!!!!

@marcelotovar1983 9 месяцев назад

we changed our belt a while back we bought the belt at auto zone after we changed it the belt was squeaking real bad so we took off bought it at dealer and it solved our problem no more noise

@thecarchak 9 месяцев назад

Price differences between for items like that are almost not worth it right. Unless you’re in a bind, I would always try to go OEM. Just bought an OEM upper control arm for my 2001 Lexus that was 3 times the cost of AutoZone but I love the quality

@davonthomas8524 9 месяцев назад

I changed my belt too and it’s squeaking even louder. I got mine from O’Reillys. You think I need a better one?

@ZMadeThisOne Год назад

Just seen the other guys video and thanks for saving me the trouble haha

@thecarchak Год назад

You're smarter than me! lol. glad I saved you the trouble. Going to get a bolt extractor on that thing when the weather is a little nicer.

@tommyd6665 Год назад

Get some extractor sockets auto parts have them. Extra bite on the bolt to come out , 14MM for that bottom one. After that you’ll need a 10mm for that bolt that’s covered on on alternator. Losen the 12mm on top and take off belt. Once you get the 14Mm off, it’s gonna need force to take off the alternator, it’s really in there. When you put the new one it’ll be the same , kinda rough . Be careful with your hands , wear gloves(mechanics) not disposable gloves.

@TheWahHero 5 дней назад

I unscrewed the top bolt but it doesn't move back. Are you sure you don't have to loosen the bottom one?

@thecarchak 4 дня назад

Yes absolutely sure

@terrylee9905 Год назад

Cheers.. just bout to tackle this... Fingers xd

@thecarchak Год назад

You got it! Don’t be like me an strip that bolt! 🙃

@brescalofrio1 2 месяца назад

i was going to say i cant reach it either

@David-qw2iv 9 месяцев назад

I broke that top bolt off and the bottom bolt is really tight on think I’ll have an issue driving around? But the belt is tite

@thecarchak 9 месяцев назад

Where? At the head of the bolt or at the body of it? If the head of it broke off, but the body of the bolt is still holding the tenure, then you should be perfectly fine. Even if you broke the head and body partially worst thing that will happen is it’ll start pulling on the tensioner and you’ll a belt squeal. That’s when you know that you need to replace that bolt. But you have to do it as soon as it starts to squeal because if you let it go for too long that belt coming off and you’re not gonna like it

@Ahmed-fz3ed 6 месяцев назад

I have like the model but when I press fuel it comes out to sound a noise annoying and if the car is stopped it does not make a sound even if the pressure of fuel what can I do help me