Тёмный

2010-2015 Camaro Starter Replacement 

Homeowner Repair
Подписаться 103 тыс.
Просмотров 24 тыс.
50% 1

Learn how-to replace the starter in your 2010-2015 V6 Chevy Camaro. This is an easy to perform repair that can be done in your driveway with basic hand tools.
🔧BUY Replacement Starter: amzn.to/3XqMKWw
🔧BUY Anti-Seize Lubricant: amzn.to/3XnPfsu
Subscribe to our channel: www.youtube.co...
Email Business Inquiries to: Homeownerrepair@gmail.com
#camaro #starter #autorepair
Disclaimer
Our videos are for entertainment purposes only. It is recommended that you seek advice or help from a qualified professional while attempting any and all repairs.
Do-it-yourself repairs can involve risk and injury, we assume no responsibility or liability for losses, damages, or injuries that include but are not limited to direct, indirect, special, incidental, actual, consequential, or punitive. All repairs performed by our viewers are at your own risk.
While we do review products that we use daily or have even used for years, we also review and test products for companies that have compensated us to try their product out. We are independently owned, the opinions expressed are our own from personal experience while using any and all products.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Recommended products with links may be commission-based when products are purchased from them.

Опубликовано:

 

25 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 32   
@blaster1120
@blaster1120 Год назад
I attempted to change mine today but it didn’t clear the exhaust. I tried to remove the heat shield but someone previously had welded it together. Any tips?
@jukedbyjesus5996
@jukedbyjesus5996 Год назад
@blaster1120 I had the same problem today. I pulled mine out thru the top
@blaster1120
@blaster1120 11 месяцев назад
@@jukedbyjesus5996 How? Had no space from the top either.
@HomeOwnerRepair
@HomeOwnerRepair 9 месяцев назад
It was tight even on this car.
@fideltrejo6480
@fideltrejo6480 27 дней назад
The secret to success is to have patience and drink plenty beer 😅. It’s a pain in the ass.
@HomeOwnerRepair
@HomeOwnerRepair 24 дня назад
lol..Yup..That's how we roll over here ...lol Don't forget to sub the channel.
@drae1836
@drae1836 Год назад
How do I know if the starter is bad. I own a 2010 that will not crank or start. Good battery
@HomeOwnerRepair
@HomeOwnerRepair Год назад
Usually it will make a clicking noise and not start. Another way to tell if a starter is going bad is to have someone turn the key forward as you tap the starter with a hammer. If the starter cranks over it is going bad. Do this at your own risk.
@drae1836
@drae1836 Год назад
Thanks
@CoverBrazilian
@CoverBrazilian Год назад
Mine just makes one click and doesn’t turn over. Have to do it a few times to get it to start. Battery is good tho. Id say that’s most likely the starter, right?
@fingerfast4197
@fingerfast4197 Месяц назад
@@CoverBraziliandid you figure it out? mines doing the same thing :(
@hmongkid12
@hmongkid12 Год назад
I did this and now i have knock sensor codes. We had to remove the knock sensor to get the starter out.
@HomeOwnerRepair
@HomeOwnerRepair Год назад
I would check the connector to see if it is seated correctly and also make sure the sensor doesn't have gunk on it that may be causing this issue. Hope this helps you out.
@hmongkid12
@hmongkid12 Год назад
@HomeOwnerRepair so I took a look and I guess I forgot to tighten it down a bit more. Hopefully that solves the issue. But your video saved me tons of time and money. I'll be looking around on your page for more tutorials.
@screwhead4202
@screwhead4202 Месяц назад
Reset the code
@hmongkid12
@hmongkid12 Месяц назад
@screwhead4202 I did that and that wasn't it. Some how the wiring that connects to the knock sensor was twisted so the 2 wires connecting into the sensor were touching. So I just untwisted it and used electrical tape and now nothing. Reseting codes don't do a thing unless you understand
@butterflydoze
@butterflydoze 9 месяцев назад
Staaawta!!!
@HomeOwnerRepair
@HomeOwnerRepair 9 месяцев назад
Thanks for watching
@roro-kp7lx
@roro-kp7lx Год назад
He never showed where the starter is located.
@hotpackjay
@hotpackjay Год назад
He showed it plenty of times seems like you weren’t paying attention boss. Passenger side of the vehicle side of the engine
@miguelhernandez6535
@miguelhernandez6535 Год назад
Driver side in between driverside cat
@frankzee111
@frankzee111 Год назад
​@hotpackjay the starter power wire is on the driver side. He never showed location. On a impala 3.6 (sideways engine) it's between the engine and radiator fan (under exhaust manifold) so I can only assume judging by this video that it's not on the driver side otherwise the steering shaft would be visible.
@HomeOwnerRepair
@HomeOwnerRepair Год назад
Watch the video
@kosmotto
@kosmotto Год назад
@@hotpackjay driver side 2011
@VictorMartinez-ft5cn
@VictorMartinez-ft5cn 6 месяцев назад
The staawwta
@HomeOwnerRepair
@HomeOwnerRepair 6 месяцев назад
Thanks for watching.
@kevin98950
@kevin98950 5 месяцев назад
😂😂😂
@ManuelRamirez-od7tm
@ManuelRamirez-od7tm Месяц назад
Another terrible design by chevy
@HomeOwnerRepair
@HomeOwnerRepair Месяц назад
Yeah it was a little bit of a challenge worming the starter out of there.
Далее
Бокс - Финты Дмитрия Бивола
00:31
How to Diagnose and Replace a Starter
13:11
Просмотров 6 млн
2010 Camaro 3.6 liter starter replacement
7:26
Просмотров 2,9 тыс.
2018 Camaro wont start part 2
4:44
Просмотров 894
5 Symptoms of a Bad Starter!
9:06
Просмотров 305 тыс.
Digital Octopus Radio CC10-15 Install 2010-13 Camaro
9:09