I’ve got this model on my 2011 F150, my wife insisted the dealer install it. Well, it never worked 100% of the time, at best 80%, and if I knew it was this easy I’d have done it. Also, the reason I’m here is because it’s likely shorted out my security system. Thanks for the vid, now I know how to remove it and throw it away!
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZWp3De4Gwg0.html Full tutorial on how to install and program to vehicle. Not sure if this will help In your scenario but it might. Hope you get er sorted out. Thanks for watching
See this following video of programing the remote start to the truck. You need to turn on a module in the computer for the remote start to work. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZWp3De4Gwg0.htmlsi=leiGu8hyl9KvGaER
Thank you very much for posting this video but did it work? I have a 2014 Ford F150 and want to install this feature in mine, just wanted to be sure everything worked fine afterwards.
Everything works fine in my 2011 f150 5.0L 4x4. You need to turn on the remote start module in the computer. See video link below for full details on how to turn on module and program keys to truck. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZWp3De4Gwg0.html
no i picked it up off ebay. I purchased from Fairway Ford on eBay years ago. I see there is another seller selling at a cheaper rate out of california. search on ebay but not sure if that seller is oe or aftermarket. my kit came with ford logos on all pieces
If you would like to know how to program and turn on the modules in the truck. See this youtube video. Thanks for watching ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZWp3De4Gwg0.htmlsi=QmgLt71ilNEPv8Ee
Here is a link of showing how to program and turn on the remote start module in the 2011 f150 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZWp3De4Gwg0.htmlsi=t7y7wTQ5YI2CT6K7
I used the make and model of my truck and I believe it was fairway ford in Michigan? I'll need to double check when I get back to the PC as mobile wont let me see that far back
check out my other video for how to turn on your remote start module inside the truck and how to program the keys if you have not already, the video entry is the same but goes on into how to turn on the remote start module so things work. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZWp3De4Gwg0.html
I purchased from fairwayfordparts on ebay. I see they no longer have the kit I purchased listed in there items for sale, im sure if you contacted them they might still have some or be able to get some.
I needed to turn on the module in the computer yes. Follow this youtube link to see how to turn on the module and program keys start to finish ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZWp3De4Gwg0.html
I made another video with step by step Information on how to install the remote start and how to turn on the remote start module yourself using your laptop and a elm327 obd2 to usb connector. Here is the video on start to finish. See the following link. I did not need to go to the dealer in the end. If they were to turn on the module and program the keys I am sure it would of been around the 100 to 200$ mark. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZWp3De4Gwg0.html
I had a local key business cut my keys. Had 2 keys cut for around 20$ and did the rest myself. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZWp3De4Gwg0.html
My truck has a factory oem remote start kit installed but I don't have the key fob that has the remote start button, do I have to order a key from ford or can I get a cheaper one from Amazon and have them cut and program it?
Hello brother.. It has not been tested on the Ford Raptor. I sold the car before trying it and now I offered it for sale, but someone bought it from me, but the remote control was not programmed on his car because his Gulf car depends on the frequency 315 and it turns out that the remote control has a frequency of 433 MHz, is there a way to convert the frequency Car remote control from 433 to 315?
No I do not know how to set it for first initial start. I do it by the remote. Push lock and start twice and it continues the runtime longer when running if I remember correctly. Haven't done it in a while
@@LUCAMTire @jason G Hi there guys, good video by the way. The only extra step on the setup is to enable the Remote Start settings to pull up options on your dash screen. For my 2013 F150 it was line 720-01-02 on the IPC Module. Middle numbers were switched from 4C0A to 4F0A. You would be able to adjust the Run Time, climate control setting. Hope that helps, it did for me.
@@drg0809 cool I believe the 2011 and 2013 have different clusters. I might be able to put the run time at a different interval but would not be able to adjust climate control there. Thanks for the intel though If you enjoyed this vide give it a like and subscribe to the channel. Thanks for watching and the extra information
I am not sure how the standards work. I believe you have to tap into e brake switch along with a couple other things for the aftermarket setups. You should have a hood switch so it does not turn the engine on by mistake when working on it. I would suggest talking to your local remote start experts or having them do the job if not familiar.
I did the installation on my 2013 f150 xlt and it only works once after I enabled it if I what it to work once again I have to disable/eneble but same only works once any ideas please on what it might be
I am not sure of the procedure. You will need to do a key procedure. Assuming it is along the same lines as this procedure but with out the door locks. I would suggest googling the forums to see if all the codes are the same and procedure is the same. Forscan has a forum with a assortment of answered questions
@@patricksannicolas1241 should be able to find the procedure through forscan forums. Try year make model manual locks remote start forscan in a Google search and see if this will narrow it down for you
@Hollywood Marine The only extra step on the setup is to enable the Remote Start settings to pull up options on your dash screen. For my 2013 F150 it was line 720-01-02 on the IPC Module. Middle numbers were switched from 4C0A to 4F0A. It enables it under Vehicle and than options ( I think) You would be able to adjust the Run Time, climate control setting. Hope that helps, it did for me.
I have a hood switch but it's not plugged into anything. I have the remote start button on my key but when I try to remote start it will just beep and flash the lights.
ebay and at that time was around 300$ CAD to my door, pricing i believe has gone up. could be wrong. see my other video for complete install with programming. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZWp3De4Gwg0.html
You need to turn the remote start module on. I will send you the video link to all the steps. You need to push the lock button and then the start button twice
Off Ebay. Came from a ford dealer out of Michigan. They shipped to my door in canada. Was 3 to 400$ cheaper then purchasing it at my local ford dealer. Not sure where the direct Ebay link is now though.
Purchased off ebay. Fairway Ford. They have a few different listing. I had the keys cut at a local locksmith location where they cut keys. And I programed the vehicle myself. See my other video on how to install and program everything in the system for the 2011 f150 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZWp3De4Gwg0.html