2011-2014 Hyundai Sonata Valve Cover Gasket Replacement DIY

Подписаться 53 тыс.

Просмотров 68 тыс.

50% 1

Here's how to replace the valve cover gaskets on a Hyundai Sonata. This will apply to other cars such as the kia optima, santa fe, etc with the same 2.0L and 2.4L engines.
Valve cover gasket set: amzn.to/3gnrih0
Fuel pump seal: amzn.to/3vi7wcj
Sealant: amzn.to/2SsACs2
Wobble extension set: amzn.to/3wtKsbG
Socket/wrench set: amzn.to/3zjitgX
Electric ratchet: amzn.to/3gmzPAQ
Gloves: amzn.to/3vgXF6D
#ad

Авто/Мото

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@MrRangerZr1 3 года назад

Valve cover gasket set: amzn.to/3gnrih0 Fuel pump seal: amzn.to/3vi7wcj Sealant: amzn.to/2SsACs2 Wobble extension set: amzn.to/3wtKsbG Socket/wrench set: amzn.to/3zjitgX Electric ratchet: amzn.to/3gmzPAQ Gloves: amzn.to/3vgXF6D #ad

@RoccocoVs 2 года назад

The link for the valve cover gasket set says it doesn't fit a 2014 sonata, is this incorrect?

@MrRangerZr1 2 года назад

@@RoccocoVs never rely on amazon's fitment guide. It fits.

@RoccocoVs 2 года назад

Understood, thanks

@iggybatista8215 2 года назад

This video is very to the point not like the other videos who have these guys taken apart things for no reason

@dalynchmob2000 6 месяцев назад

Fantastic video without all the typical BS you see in others. Right to the point, clear, quick, and very precise. Thank you!!

@hamiltonarmando 7 месяцев назад

Great video saving us $300+ thank you 🙏 was hesitant at first to take it off myself

@dewkeating Год назад

2011 Sonata 2.0 turbo leaking on to turbo heat shield. I followed this video and finished with no issues in about 2.5 hours. The bolt under the fuel line was a pain. Thanks!!

@enchantedbananas 2 года назад

Thanks dude i've come to RU-vid for other instructionals on this model car and honestly wish they were all like your format. Great job i thumbs it up.

@gwenjones4966 2 года назад

Facts!! I can't stand that page with the engine out of the car and prebroke down. Like come on. I'm out of my element here!! Lol your video was great, I did it wrong with their format but yours is excellent going to repair today

@SteveCoates-fq2lw 3 месяца назад

Clean, clear and direct tutorial. I am headed towards 70. Glad I had tour assistance. Quite different from the old VW horizontally opposed engines where we used to have to set valves every 2-3 K miles.😅 Thank you.

@Gtflybmx75 10 месяцев назад

Thank you (I like grabbing my tools from work before the weekend and this was very helpful) doing the valve cover gasket on my fiancés dads car this weekend a month ago he told me it looked hard “cause of the spring thingy” (fuel pump) and I watched a video then your video and so straight forward thank you

@rackets001 2 года назад

Excellent video! Nice clean format! Thanks for posting!

@hotboyfrom91 2 месяца назад

Loved this video. Straight to the point instructions. I completed this job in 2 hours this morning

@JohnBRiley-xw7br 2 года назад

Thank you for a thorough & clear video with all the info I needed.

@JohnBRiley-xw7br 2 года назад

Hello, I am not able to find the O ring you replaced on the fuel pump.

@MrRangerZr1 2 года назад

Links in the description

@davegiron6620 Год назад

Thanks for the tutorial it helped me do the job, there was one screw that was hard to take off, and it was under the fuel line bit other than that it went smoothly.

@SonicOrbStudios 8 месяцев назад

Yeah he didn't bother showing All you had to remove to get to that single damn bolt. It's a bugger and he just edited right past it 👀

@geemantoo 2 года назад

Absolutely Excellent video.

@spraym88 Год назад

Awesome Video. Thank you sir

@Moondoggy1941 Год назад

Great video, thanks.

@jluisb9538 2 месяца назад

Excelent video thank you so much!!

@fernandobarboza6857 2 года назад

Good video Thanks 🙏🏽

@ExpertiseRealEstate 8 месяцев назад

Masterclass Video

@madb9422 10 месяцев назад

Thx! Subscribed!

@osamabatrikhi5272 Год назад

Thanks

@bigotonbrand 2 года назад

Is that fuel pump o ring expensive? I'm checking for my 16 sonata, oem, comes out to 40$+...does that sound correct pr can I use regular o rings from autozone? Ty

@MrRangerZr1 2 года назад

The set should come with the gasket, check the link in description.

@hectorboyar4321 Год назад

subscribed!!

@YH7R Год назад

Thanks for video much appreciated,however i didn't see your strategy for removing the valve cover bolt located directly under the fuel line ?

@MrRangerZr1 Год назад

Just bend it a little bit or use a wobble extension

@user-do3jv9ub3t Месяц назад

شكرا جزيلا❤

@MrRangerZr1 Месяц назад

عفوا

@185chargers Год назад

I just put a new valve cover gasket on my 2016 sonata and forgot to put silicone. Its now leaking from one of the spots you pointed out back side. If i remove the cover again to put silicone will the gasket be usable? Its probably been a month or since i put it on the car. Also why the silicone on those 2 spots? Thanks

@ericc1599 Год назад

Yes gasket should be fine just take apart slowly. Silicone there is just extra insurance because of the timing case cover seem in those spots!

@MrRangerZr1 Год назад

yes gasket should be reusable

@guillermonavarro3042 6 месяцев назад

@@MrRangerZr1 Does this solves the problem of expulsing white smoke by the exhaust on a Hyundai sonata 2016?

@engagedasf6291 11 месяцев назад

So i needed a valve cover replacement, mechanic fixed it but two days later my check engine came on and now they’re saying i have a motor issue. Never did before the first mechanic touched my car. Do you think it could just be something lose underneath my hood?

@MrRangerZr1 11 месяцев назад

Take it back to him clearly he didn't do something right

@Aangrox Год назад

Does it matter if the spark plugs are still on? I didnt see them removed in this video.

@MrRangerZr1 Год назад

Spark plugs do not need to be removed

@patbar8306 2 года назад

Where are the fuel injectors located on this engine? Are they underneath the intake manifold?

@MrRangerZr1 2 года назад

It's GDI, hidden under the intake manifold.

@collinlovesapple Год назад

I was told by Hyundai to replace the fuel line because it’s a single use product once uninstalled it’s unusable. That true?

@MrRangerZr1 Год назад

not true just replace the gaskets i showed in the video

@NikitaAnnenkov 2 года назад

Is there a pattern to follow when tightening back the 10 valve cover bolts?

@MrRangerZr1 2 года назад

Star pattern

@NikitaAnnenkov 2 года назад

@@MrRangerZr1 shoot… I think I stripped the three front bolts.. not sure why but all others lined up, but these are just a bit off with engine block holes.. will continue tomorrow

@citizens8773 10 месяцев назад

@NikitaAnnenkov Will 1 year later 😅 any leaks? I stripped one bolt on my kia stinger, and i worried.

@yoeliavega6244 2 года назад

What if the fuel line shoots gas out? Does the vehicle need to be empty on gas?

@MrRangerZr1 2 года назад

Watch the video, I show how to relieve the fuel pressure.

@justmaccarreviews6240 9 месяцев назад

So is it best to replace the entire cover? Since heat tends to warp plastic?

@MrRangerZr1 8 месяцев назад

That rarely happens

@NyckAgui 2 года назад

To what torque rating do we bolt down the valve cover bolts ?

@MrRangerZr1 2 года назад

Once they stop tightening stop there, the cover is plastic.

@jake47 Год назад

They are 10 ft

@jake47 Год назад

First 7.4 then 10 ft

@AmericanCock Год назад

How long does it take for the seal to cure before driving it

@MrRangerZr1 Год назад

Overnight is good enough

@catdaddy7909 2 года назад

Good video. Does that gasket fit 2014 Sonata 2.0T?

@MrRangerZr1 2 года назад

Yes

@catdaddy7909 2 года назад

@@MrRangerZr1 Thanks. One more question. The link to the fuel pump seal isn't showing the seal. Do you have another one?

@catdaddy7909 2 года назад

Nevermind I found it. Thanks

@catdaddy7909 2 года назад

Back again. How did you get that bolt under the fuel line?

@nestorcortez1474 2 года назад

@@catdaddy7909 Can you share the link for the oring please

@miguelrodriguezzz639 6 месяцев назад

Do you have to unplug the battery?

@MrRangerZr1 6 месяцев назад

@forevertera0000 2 года назад

What were the symptoms the reasons you replaced it

@MrRangerZr1 2 года назад

Oil leak

@byronz422 Год назад

What's the name of the smaller gasket?

@MrRangerZr1 Год назад

Fuel pump gasket, listed in description

@gina6619 3 месяца назад

Is it normal for there to be a rubber smell & smoke after replacement?

@MrRangerZr1 2 месяца назад

From residual oil yes, just clean it off

@bzgambini 2 года назад

I ended up doing it and now i have oil coming out one of the middle top bolts for the cover

@MrRangerZr1 2 года назад

improper install gasket may have pinched

@bzgambini 2 года назад

@@MrRangerZr1 any solution? I think it did get pinched :/

@MrRangerZr1 2 года назад

@@bzgambini redo the job with a new gasket if it's damaged

@bzgambini 2 года назад

@@MrRangerZr1 hello yes i just noticed a crack around the bolt need to but a whole new gasket cover

@rayray1846 Год назад

What's the avg price to get this done?

@MrRangerZr1 Год назад

I would say more than $300

@kcomeskyy9911 Год назад

Hyundai charges 580

@Pryda-Z Год назад

Why stall the car and not disconnect the battery?

@MrRangerZr1 Год назад

To relieve the fuel pressure. Just disconnecting the battery won't do anything.

@marcosvaleyronmartinez2265 Год назад

No silicon?

@MrRangerZr1 10 месяцев назад

Watch the video again, you have to use sealant on some areas.

@JoshMcGrath98 7 месяцев назад

Hyundai wantsd 1200 to do this on my moms car in her Santa Ge sport 2.0 non turbo... what!