2011 Defender door hinge replacement.

Подписаться 145 тыс.

Просмотров 74 тыс.

50% 1

If you want to just see it fitted skip to about 15:40 otherwise enjoy it from the start with the sanding, priming and painting.
Paint was from:
Fiona Mcgowan
7 Derrychara Link
Enniskillen
Fermanagh
BT93 7ER
This link on eBay: www.ebay.co.uk/itm/28090963422... #GaryHuston #Blacksmithing #Farrier #ASMR #Horseshoeing #Fabrication #Ironwork #Hoofcare #welder #repairs #horse #farriery #engineering

Развлечения

Опубликовано:

20 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 83

@JAMESGRANGER 5 лет назад

Thank you! I've just changed mine using your video as guidance. The only difference in technique was to undo the nuts inside the door but leave the bolts in place. Close the door, then undo the pillar bolts. And pull the hinge off. That way no reason to hold the weight of the door. Then reverse the procedure putting it back.

@MrSmeggypaws 9 лет назад

Nice work as always Gary.

@gigemtxaggies 9 лет назад

Thanks for all your videos. And I love the Defender... In my top 3 of dream videos.

@ToasterSandwich69 9 лет назад

Wow! I can't believe that I didn't know that LR was still making Defenders. What a bloody nice looking machine.

@cigarcaptain 9 лет назад

a very proper job you have done. it looks great

@kbbacon 9 лет назад

You did a fine job!

@victorshafiee6156 5 лет назад

Great tutorial. Done really well.

@markwpm657 4 года назад

Great video, very helpful, much appreciated

@marklambert4457 9 лет назад

Good job Gary great finish, well done for ditching the Nissan mate of mine had one cost him loads when it started to clock up the miles. Shame the Land Rover hasn't got the same cab space, I always find them a bit cramped when driving. Check out paddock parts they were great for landrover bits if there still going. Look forward to the truck tour, see how you fit all your kit into it.

@johnmorris9089 9 лет назад

i guess because i like watching your blacksmithing videos

@myimplace7114 8 лет назад

Great work.

@TheChipmunk2008 9 лет назад

The lacquer (clear coat) is usually there just to allow you to polish out any minor scratches without going into the actual paint, thus leaving the colour unaffected

@453421abcdefg12345 Год назад

One obvious thing to have done while you were there was to change the rusty bolts for stainless steel ones, an easy fix at this stage, and plenty of copper grease on the threads. Chris B.

@krisgrizzly9920 9 лет назад

Ok well I can't wait to watch your next video

@Rob-cz7lg 3 года назад

When I bought a new replacement hinges which was allmakes, it had more slop than the old one I was taking off. Ended up taking the pins out and redrilling and making new pins for them. I think sometimes the stuff on that’s on eBay are seconds, as there no way they could be used as they came.

@garyhuston 3 года назад

That particular door wants doing again, they have only lasted 6 years.. I might get better quality ones this time even if I only get them for the drivers door which is in constant use!

@JasonLockwood87 Год назад

Brilliant video. I've just bought a defender 90 and the doors have dropped about an inch. The previous owner never sorted it and would would just slam it. I'm going to use your method of raising the catch when I replace the hinges. Let's see how it goes :)

@garyhuston Год назад

Good luck, it’s a learning curve owning a defender!

@JasonLockwood87 Год назад

@@garyhuston thank you. It’s a defender 90 2.5 TD 1989. It’s an Anglesey number plate too. As we all know the defender was designed on Anglesey. It’s just had a new chassis but I’ve got so much more work to do.

@MrJsowa 9 лет назад

okay now we need a vid of the new truck,ehemm kinda glad you ditched the nissan. and very good job on the paint work

@garyhuston 9 лет назад

MrJsowa One coming soon!

@nickm8101 8 лет назад

Hi Gary, Wonder what the three things are in chequer plate. They look like they are in grommets. Need to replace my bolts with SS. Mine are far worse than yours :( Great Video and nice workshop. Nick

@garyhuston 8 лет назад

Amber LED marker lights that come on with the sidelights..

@iceburn177 9 лет назад

Haven't read all the comments so sorry if mentioned already, but why didn't you paint that spot behind the hinge? You have the skills and the materials...

@garyhuston 9 лет назад

iceburn177 I couldn't see the point really, it won't be seen again until I re-new the hinge again. It's not bare metal it is painted just not blue!

@millin2222 10 месяцев назад

Very informative video, can you advise of what you used to unfasten the the bolts and screws, ..many thanks

@garyhuston 10 месяцев назад

What do you mean? I just used the appropriate wrench

@millin2222 10 месяцев назад

@@garyhustonlol I'm basically learning, but I appreciate the advice. So a wrench is needed what size. Thanks

@garyhuston 10 месяцев назад

@@millin2222 I have no idea off the top of my head but open a torx set and try them until you find the right one!

@millin2222 10 месяцев назад

@@garyhuston Thanks appreciate it

@petercassidy8036 Год назад

Hi Gary, great video, thank you. I am going to have a go myself now! How adjustable, up or down, is the position of the door striker? It doesn't look as if there is much scope given it is fixed in two holes. That was the bit where your video was off. Cheers Peter

@garyhuston Год назад

The door striker has loads of adjustment but if you put the hinge back where the old one was you shouldn’t need to move it.

@petercassidy8036 Год назад

Thank you very much Gary.

@Sean-id1pn 5 лет назад

👍🏻

@JJamessssss 3 года назад

just out of interest what sort of temperature was your garage when you painted the hinge? last experience I had of painting my bulkhead hinges in my garage the paint dried and had lots of cracks in it, not sure if it was because i didnt let it cure at the right temperature or because i didnt lacquer it

@garyhuston 3 года назад

I don’t recall what the temperature was 6 years ago but it was June so I’m guessing reasonably warm. No idea why yours cracked. Did you use fresh paint? If it dries too quickly I think it can affect it. I used new primer, top coat and lacquer and never had a problem. I have used the very same tin of top coat for several other hinges over the years with no issues.

@DiesInEveryFilm 9 лет назад

casting pitting

@alpine1600s 9 лет назад

I wish LR were more affordable and available in the US. A Defender on US roads is as rare as that Lada Niva classic I saw around town. Thank you non-free market tariffs, import duties, and irrational NHTSA regulations.

@LordHoth_09 9 лет назад

You got that right

@jc433j5 8 лет назад

hi, can i use land rover defender hinges on a land rover series of 1968 without making any modification?

@garyhuston 8 лет назад

Sorry, I have no idea..

@frederikgenie3463 7 лет назад

jose carlos Dávila you can use it

@donaldridley7826 5 лет назад

I’ve just bought stainless steel bolts for mine. Now I know how to do the doors. Is the back door the same style?

@garyhuston 5 лет назад

Yes, exactly the same

@donaldridley7826 5 лет назад

Are there nuts you have to get to?

@garyhuston 5 лет назад

Donald Ridley captive ones in the door pillar and loose ones behind the door card. You can see them if you open the door.

@donaldridley7826 5 лет назад

Sorry. I meant in the rear door. Are they captive?

@garyhuston 5 лет назад

I was talking about the rear door!

@johnmorris9089 9 лет назад

hey gary i'd like to see you do a vid on the kissing horses horse shoe heart

@garyhuston 9 лет назад

John Morris What is that?

@eog0579 6 лет назад

Hi Gary, was the new hinge electroplated?

@garyhuston 6 лет назад

yes

@eog0579 6 лет назад

Gary Huston OK, did the paint stick OK with out t-washing the hinge? You know what galv is like regarding painting!! Great videos by the way

@garyhuston 6 лет назад

yes it stuck fine as it was only electroplated not galvanized. If you are worried about it sticking use etch primer.

@johnmorris9089 9 лет назад

a horse shoe heart with the ends in the shape of horse heads bent down to close the heart. you might check out chandler dickson's channel

@garyhuston 9 лет назад

John Morris If he's done it why do you want me to do it?

@boz6161 4 года назад

Now we need a tutorial of how to remove the bottom bolt in bulkhead part......🤬🤬🤬

@garyhuston 4 года назад

The big one at the bottom?

@boz6161 4 года назад

@@garyhuston ....yes..that one ....akward bastard....!!! Took me a little bit longer than your vid....but landrover tool number to the rescue....ie angle grinder....🤬

@garyhuston 4 года назад

Boz 61 Haha, yes, it can be a tricky little bugger!

@TheChipmunk2008 9 лет назад

£1700 for a bumper. HOLEY SH*# They're discontinuing the Defender soon, which is sad, end of an era :(

@garyhuston 9 лет назад

***** That price included all fitting and paint etc, but still bloody expensive! I think LR are shooting themsejves in the foot by discontinuing it, but they say it's too hard to get it to comply with EU rules.....

@geedubb2005 9 лет назад

garyhuston yep, sure wish our governments would clean themselves up before mandating drastic changes that add thousands to the cost of vehicles. If we could only make politicians obsolete like they do our good stuff, we'd have it made.

@lxtechmangood9503 2 года назад

At least your piller bolts will come out. No hope for mine

@garyhuston 2 года назад

No problem, shear them off and drill them out.

@lxtechmangood9503 2 года назад

@@garyhuston interesting approach. Though with how much up and down movement on both doors that may have to be done 🤔

@krisgrizzly9920 9 лет назад

Maybe make a straight razor ?

@garyhuston 9 лет назад

Kristopher Bruno already made one..

@krisgrizzly9920 9 лет назад

I've seen about every video you've made all look for it and your very good on how you do your videos Gary I enjoy them a lot and I feel like I've actually learned a little thank you keep up the great work!

@garyhuston 9 лет назад

Kristopher Bruno didn't do a video of it just made it!

@psdude23 9 лет назад

Hi, I'm trying to purchase touch up paint from the eBay seller in your video description but I'm having issues checking out. eBay customer service wasn't able to help. I can't even send the seller a message on eBay. Can you give me the seller's email or phone number? Thanks

@garyhuston 9 лет назад

psdude23 Don't know why you are having trouble but it's fionamcgowan@ymail.com

@psdude23 9 лет назад

Thanks for the response. Tried that already - that email is deactivated. I was able to contact the store through eBay. Apparently they're not allowed to ship paint to foreign countries anymore.