2012 Nissan Maxima Lower Control Arm Noise Fix

Подписаться 7 тыс.

Просмотров 29 тыс.

50% 1

Please support the channel by becoming a Patreon / bigwillcarcare
Disclaimer
This video is for reference only always refer to manufacturer instructions, advice and proper service manual for actual directions specifications and safe practices when working with tools and equipment. Due to uncontrollable factors Big Will's Car Care is NOT Liable for any misuse or improper usage of Products, Information, Mechanical Equipment, Electrical Equipment, Hand Tools,Power Tools, Ramps, Jacks, Jack Stands, Cleaners, Grease, property damage, injuries, loss or damage that may result from any inappropriate and or improper use of this video and tools

Опубликовано:

29 апр 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@MrFaberjr 2 года назад

Just did the LCAs on a 2010. Legit took 2 hours on each side and if you read forum’s and comments some guys spending all day. Here’s how I did it Remove the calibers, caliber brackets, and rotors. This will completely lighten the hub to all you to maneuver it around when time to install the LCA. Disconnect the strut and stabilizer from the hub as well. Next put the ball joint in first. Repeat ball joint in first. Slip the bolt through install nut but don’t tighten. Now slide the LCA in from back to front. Spinning it in. Take a rubber hammer and tap it into place. Use a screw driver to line the the holes up, then put in your bolts buy turning them in and adding your nut. I read a Nissan techs recommendation on this buried in an Altima’s comments. Tried it and it worked perfectly! Good luck with it.

@BIGWILLSCARCARE 2 года назад

@faber Jr Thanks for watching please Like and Subscribe if you haven't already and also support my IG BIG WILL CAR CARE

@Atonement- Год назад

Better be right dude, lol... Chalk me up for the all day crowd (1/2 day ).... I like the idea of lightening the load, it is a motha to get back in.

@johncrocker9514 Год назад

Really Great video. Clear, step-by-step instructions.

@BIGWILLSCARCARE Год назад

@John Crocker Glad it was helpful! Thanks for watching please Like and Subscribe if you haven't already

@davemarques9601 Год назад

Thanks for the video....easy enough now that I saw your video....THANKS!

@BIGWILLSCARCARE Год назад

@Dave Marques Thanks for watching please Like, Share and Subscribe if you haven't already

@rayray1846 Год назад

Excellent work

@BIGWILLSCARCARE Год назад

Thank you! Cheers! Thanks for watching please Like and Subscribe if you haven't already

@wboyd33 2 года назад

Thanks for the video. I have both lower control arms, outer tie rod ends, & sway bar links to do on my Maxima. I already have the parts, I just need the time & weather to do it all. Now I have more of a plan to go from since I've seen it done.

@BIGWILLSCARCARE 2 года назад

@DoBe Thanks for watching please Like and Subscribe if you haven't already

@Ccxbbs Год назад

What do you think the cost could be for a mechanic to do it?

@wboyd33 Год назад

@micajahcobbs1809 I found the time to replace the full suspension on the front & rear of my 2014 Maxima. Struts, control arms, tie rod ends, sway bar links with bushings,rear shocks, & rear sway bar links with bushings. I'd have to say at least $800 for a shop to do it all at a minimum. It was $100 to have a shop align it afterward. It'll also depend on where you are... Major big city versus little podunk town will have different hourly rates. I'm not in either, but a good-sized Navy town. It wasn't that hard to do without a lift either & the car rides SO much better it's ridiculous.

@ephraimkaravan Год назад

@@CcxbbsMy local shop quoted me a little over $1,800 parts and labor just for the front lower control arms. Add in more steering/suspension components, and you could expect to pay upwards of $5,000 for everything

@Rightn2Parabola 2 года назад

Fantastic video! Thanks for the detailed explanation of everything! Will definitely make my job easier.

@BIGWILLSCARCARE 2 года назад

@Matt Hansen 👍

@georgezeck1396 3 года назад

Don’t the joints get grease? Did the car need alignment sine the strut was (partially) removed? Thanks

@BIGWILLSCARCARE 3 года назад

@George Zeck Not necessarily unless the bolt has a lobe on it but the best thing is to put a reference mark the head of the bolt and the strut mounting bracket so you put it back in the same spot. Thanks for watching please Subscribe if you haven't already

@lobssangmarrero4781 2 года назад

Shouldn’t the car be jacked up to the correct ride height before torquing down the three bolts? Great video and explanation by the way 👍🏾

@BIGWILLSCARCARE 2 года назад

@lobsang marrero yes that's how I usually do it. Thanks for watching please Like and Subscribe if you haven't already

@papileon467 2 года назад

That's exactly what the f my maxima is doing. Thanks bro.

@BIGWILLSCARCARE 2 года назад

@Papi Leon Thanks for watching please Like and Subscribe if you haven't already

@chelle315 2 года назад

Mine too....I have a 09 SV. The rubber looks like it's dry rotted so I have that clunk noise too.

@BIGWILLSCARCARE 2 года назад

@@chelle315 Thanks for watching please Like and Subscribe if you haven't already

@andersonjiang8938 Год назад

Did you hear a noise when you accelerate from a stop?

@andersonjiang8938 Год назад

Just an update! Replaced control arms both sides and noises went away.

@BIGWILLSCARCARE Год назад

@Anderson Jiang yes you get a noise. Sorry for the late response. Thanks for watching please Like, Share and Subscribe if you haven't already

@Ccxbbs Год назад

Link to the part?

@BIGWILLSCARCARE Год назад

@micajahcobbs You can find it on Amazon or rock auto. Thanks for watching please Like, Share and Subscribe if you haven't already

@allenneal9314 Год назад

you should have showed it. would have been much easier that way

@BIGWILLSCARCARE Год назад

@Allen Neal I have other videos on how to remove those parts. My videos are detailed and specific to the parts that require servicing or replacement so I try to keep thingbto the point. Thanks for watching please Like, Share and Subscribe if you haven't already

@TheMarshall5555 Год назад

Honestly I have the same exact same car and I change everything my self and you do not have to puff those things from the strut. .. nooooo. That’s too much work all I did was wiggle it I. Comfortable it has to be comfortable you cannot put it in with stress or if it’s tight going in .. your doing it wrong one side at a time. I did it to both side YOU JUST HAVE TO KNOW WHAT YOUR DOING ..

@BIGWILLSCARCARE Год назад

@TheMarshall5555 there are a few ways to skin a cat it all boils down to whatever method works for you. Thanks for watching please Like, Share and Subscribe if you haven't already

@Blood_gaming21-yt Год назад

@BIG WILL CAR CARE hey man I love the video I'm going to use it as a reference when I do mine but please don't skin a cat... skin a cow or goat. Even a dog but a poor cat😢 nooo