No video :(

2014 HYUNDAI SANTA FE, CLICKING NOISE IN THE STEERING WHEEL

Подписаться 8 тыс.

Просмотров 12 тыс.

50% 1

Hey guys welcome back. In this video im working on Hyundai Santa Fe with clicking/knocking noise when turning the steering wheel from side to side. In this video im showing to you on how to replave the universal joint. i hope you guys like the video and the content of this channel and dont forget to subscribe. Thank you
If you have concern, suggestion or questions email me at hyundaitech261@gmail.com
Disclaimer: This youtube channel is intended for informational purposes only. The jobs that you see on these videos are based on my knowledge and experience as a technician. Information provided through this youtube channel is not intended to serve as a substitute for your professional technician/manufacturer.
Intro and Outro music: bensound.com
Thumbnail and Outro template: canva.com

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@shabazhussain3367 Месяц назад

Hi i see you reply to comment much appreciated I have a 2017 santa fe replaced this part but still have same issue also checked the coupler. Thanks

@hyundaitech Месяц назад

Did you check first the outer tie rod or inner tie rod or the steering rack? If they are all good and the mounting bolts for the universal joint is good and tight most likely the steering column issue, and i believe those 2017 santa fe models doesnt have those rubber coupling like the sonata. Hope that helps.

@forbro8301 День назад

I wish I understood what exactly you were marking. I don’t understand what you were marking to have a reference for. I’m gonna try to do this on my 2013 Santa Fe soon.

@hyundaitech 12 часов назад

I was just marking the position of the joint so that i dont have to recenter the steering wheel or do an alignment

@meylehoodghana3456 Год назад

Great explanation

@PinoySilverback Год назад

Kamusta? I have a 2014 Santa Fe Sport. May knocking sound when turning the steering wheel especially when turning at low speeds.

@hyundaitech Год назад

But if you move the steering wheel from left to right and vice versa on park does it make the same noise? I would check the suspension first especially if you said at low speed, if suspension and steering under the car is good, then check universal joint, park and move the steering wheel.

@PinoySilverback Год назад

@@hyundaitech thanks for replying. It makes the same sound while in park. It's not very loud. I had the steering components (tie rods, joints, etc.)checked by two mechanics. Theh both said everything is good and tight.

@hyundaitech Год назад

@@PinoySilverback like the way i did on the video, carefully place your hand on the joint ( make sure be mindful of your fingers) then turn the steering wheel if the universal joint is faulty you will feel some play on the joint, or if you visual check it if theres some grease coming out from the joint and yeah you have faulty universal joint.

@PinoySilverback Год назад

@@hyundaitech Thanks!

@PinoySilverback Год назад

@@hyundaitech 5 months ago I had this checked at the dealership. They found that the bolts were loose. After tightening the sound went away.

@pegasus75 Год назад

Hi, did you remember the part #, or where you get the Part# and order from? I ordered one for my 2013 Hyundai Santa Fe base sport, part # 56400-4z000 according to hyundai website, but when I received it, the joint is too short for my car (when the joint is fully extended). The old one seems to be longer. any help will be appreciated. Thx

@hyundaitech Год назад

Whats your last 8 of the vin, maybe i can help

@pegasus75 Год назад

@@hyundaitech DG086570. According to online Hyundai parts, the part # is 56400-4z000, but when I received the order, the shaft was too short. Not sure if this is limited edition. Even the Power steering motor is an updated version without the rubber coupler. Thank you again for your help. I really appreciate it

@hyundaitech Год назад

@@pegasus75 hi the part number you provides is correct when using your vin number its 56400-4z000, unless theres a supersede number so best way is ask from dealer if theres a different part number for that part. Hope that helps

@pegasus75 Год назад

@@hyundaitech yeah I think you are right, something is definitely not right lol..thx again for your time.

@pegasus75 Год назад

Hi, finally got the right part #, installed everything just like you did except I have to remove the MDPS module for better access to the bolt, anyway after I put everything together, there is a "bearing" noise that definitely comes from the steering column when I turn the wheel left and right. Did I miss something? No EPS light, the clock spring seems to be fine. I even grease the steering shaft a bit. Sorry to bother you, just hoping you can guide me to the right direction. thx again

@Captobvious23 Год назад

Hi I was wondering if there's a way to determine if you're steering wheel is straight with a scan tool

@hyundaitech Год назад

Yeah you can check by reading the stearing angle. But the best way is thru alignment.

@Captobvious23 Год назад

@@hyundaitech Thanks for the info I have another question for you I have 147k on my 2013 Hyundai sonata turbo when should I consider changing the cam follower on the high pressure fuel pump Thanks again

@hyundaitech Год назад

@@Captobvious23 hi usually those components are lifetime, as long you do oil change regularly.

@Dpbherrmann Год назад

Is the clicking sound only appearing when the car has been driven a while? That's my case.

@hyundaitech Год назад

No it should all the time, and if you park your vehicle for awhile then try to start it then move the steering in either direction you usually hear a one click or something like that

@leecelis4712 7 месяцев назад

Hello good day, I have a similar problem. Can I still drive the car till this problem is sorted? Many thanks

@hyundaitech 7 месяцев назад

Yeah you can still drive the car, as long joint is not falling apart. If its just noisy yeah it can wait a little bit until you fix it.

@leecelis4712 7 месяцев назад

Many thanks, you're the best.

@MrAntoha78 Год назад

Hi Hyundai tech! I used your professional skills to detect problem on my u joint. Now when I disconnected shaft I didn’t disconnect the battery. In the process I must have turn steering wheel couple of times one way or another cause it wasn’t connected. When I installed new shaft the dash come with eps warning red light and also electronic stability control and down hill brake control lights show yellow. My question : is it because I was playing wit the de attached steering wheel and can it be fixed by connecting it to the diagnostic computer? Regards Anton

@hyundaitech Год назад

Yeah most likely when you remove the joint,. When you put everything back together was the steering wheel straight with the tires? Maybe try to straigthened the tires and the steering wheel together. If still doesnt work you need the scantool to monitor the steering angle and make it to zero then disconnect the u joint then the straight the tires, then reinstall everything. Hope that helps

@MrAntoha78 Год назад

@@hyundaitech thank you Sir! I really appreciate your help. Meanwhile it’s drives normal as usual. Can I drive it for 7- 10 days before go to the garage to fix? Cheers

@hyundaitech Год назад

@@MrAntoha78 with the warning lights? It drives normal without warning lights? If yes, yeah you can drive it

@MrAntoha78 Год назад

@@hyundaitech I think I damaged clock spring. That explains lights on the dash and buttons on steering wheel is not responding. Was turning disconnected wheel to much

@hyundaitech Год назад

@@MrAntoha78 oh no, let me know when you fox it

@gabitorivera9344 11 месяцев назад

Helloo sir if I see grease leaking it’s bad?

@hyundaitech 11 месяцев назад

If its making noise and the noise is coming from there and yeah its bad.

@gabitorivera9344 11 месяцев назад

Mines makes like a grinding noise

@edm2031 Год назад

What is the part number ?

@adolfomabalot7424 Год назад

Are you in the philippines sir

@hyundaitech Год назад

No sir, canada hehehe

@adolfomabalot7424 Год назад

@@hyundaitech kala ko sir sa pilipinas ka hirap kasi magpagwa dto sa atin kng kani kanino nagbabayad ka nmn ng maayos palpak nmn ang gawa yng sta fe ko sir may mahina sound na ganyan sabi mormal lng daw?

@hyundaitech Год назад

@@adolfomabalot7424 suggest ko, as long as its not safety issue, jist monitor it for now then if it gets worst atleast now you are sure that its coming from universal joint.

@PinoySilverback Год назад

@@hyundaitech Whoa! Where in Canada? Malapit ka ba sa Kitchener bro?

@hyundaitech Год назад

@@PinoySilverback toronto man